Chain clean and lube, DIY

Тәжірибелік нұсқаулар және стиль

Hi, This video show how to clean chain, front and rear sprocket areas and lube them.
Tools used in this video:
1. 8mm socket.
2. 5mm allen key.
3. Grand Pitstop motojack.
4. chain cleaner spray from Rolon, lube from Grand pitstop and a brush.
To open the front sprocket inner cover. take a sharp edged tool a screw driver or any thin blade like thing and press the lock of the cable tie towards you and pull the cable out. its easy and doesnt damage the cable tie. i have done it multiple times. no issue. Just be extra careful while tightening the allen bolts of the inner cover. cauz the inner cover material is thin and tends to bend if more force is applied. Thank you.

Пікірлер: 19

  • @nandyad
    @nandyad18 күн бұрын

    Very good

  • @tejasarun352
    @tejasarun352Ай бұрын

    great vid

  • @djalmajoaquimdasilva450
    @djalmajoaquimdasilva450Ай бұрын

    Verry good

  • @justmalluhuman
    @justmalluhumanАй бұрын

    brother really amazing and satisfying job have done, i would suggest you to keep an on your camera angle, and sound it would be better if high definition audio comes along with it will make it an international standard video, great job so far brother. ❤❤

  • @2wheeledcompanion

    @2wheeledcompanion

    Ай бұрын

    thanks brother. at present nor do i have any video making skills or budget & equipment to make better videos. i know that my videos are not appealing, will try to improve.

  • @gurucharanchundi
    @gurucharanchundi2 ай бұрын

    Thank you so much! Just one doubt, what is the black zip tie looking thing that is holding the cable in place? How did you remove it and put it back? Just asking so that I don’t accidentally do something to damage it. Thank you for recording and uploading 😃

  • @2wheeledcompanion

    @2wheeledcompanion

    2 ай бұрын

    with any sharp edged tool, u can remove the zip tie lock. try on some other ziptie if u have. its easy and it doesnt damage the ziptie also. i have already done this multiple times. just place the screwdriver in between the lock and cable then pull the lock towards urself simultaneously pull the cable down.

  • @gurucharanchundi

    @gurucharanchundi

    2 ай бұрын

    @@2wheeledcompanion Thank you man!

  • @pascal8278
    @pascal8278Ай бұрын

    what tool do you use that replaces the center stand that is not standard on this bike and that you use to lift the rear wheel so that you can clean and grease the chain?

  • @2wheeledcompanion

    @2wheeledcompanion

    Ай бұрын

    it called moto jack from grandpitstop

  • @gurucharanchundi
    @gurucharanchundi2 ай бұрын

    Hi, is the Agaro tool kit of good quality? I am also looking at Stanley, Taparia, Bosch GSB 26, Bosch 46 bit screwdriver sets

  • @2wheeledcompanion

    @2wheeledcompanion

    2 ай бұрын

    if u have the budget, then go for Bigger brands. i bought Agaro cauz i got it for 1300rs and its of quality.

  • @gurucharanchundi

    @gurucharanchundi

    2 ай бұрын

    @@2wheeledcompanion Thank you

  • @sanjankashyap4113
    @sanjankashyap411328 күн бұрын

    Bro which chain lube and cleaner have u used, and is it fine for x ring chain of speed400?

  • @2wheeledcompanion

    @2wheeledcompanion

    28 күн бұрын

    i used Rolon & Grand pit stop, compatible with x ring

  • @elvisbastian
    @elvisbastianАй бұрын

    Any tips to keep exhaust pipes clean and shiny?

  • @2wheeledcompanion

    @2wheeledcompanion

    Ай бұрын

    i use a polish paste

  • @elvisbastian

    @elvisbastian

    Ай бұрын

    Which one

  • @2wheeledcompanion

    @2wheeledcompanion

    Ай бұрын

    @@elvisbastian Autosol 1734 Stainless Steel Polish, 75 ml amzn.in/d/0fmCeAuE

Келесі