CFMOTO Brake upgrade
Тәжірибелік нұсқаулар және стиль
CFMOTO Gets a Brake upgrade today because we like to stop.
for all of your CFMOTO needs check out www.rngperformance.net
Join this channel to get access to perks:
/ @r.n.gperformance
#CFMOTO #CFMOTOUSA #RedNeckGarage
Thank you for all of your support we hope to keep bringing you more content and we hope to get better and better.
PLEASE LIKE, SHARE, SUBSCRIBE and CLICK THAT BELL!!!
Here is how you can support us.
/ redneckgarage
If you would like to donate to the channel feel free to PayPal me AT stephenhayes1988@gmail.com OR
paypal.me/RedNeckGarage1988
Want to Buy our Clothing?
teespring.com/stores/redneck-...
My Amazon store ATV/UTV Parts and accessories Tools and much more! check them out.
www.amazon.com/shop/influence...
Пікірлер: 42
Thank you for watching please like share and subscribe. Check out the Master cylinder here rngperformance.net/shop-parts-accessories/ols/products/cfmoto-mastercylinder-5syv-081100-6000
Thanks for the video, appreciate all the work you do testing these machines, full supporter of RNG!
@R.N.GPerformance
Ай бұрын
Your very welcome 🙏 thank you 😊
RN thank you for this video it speaks to me. Was going down a long STEEP mountain hill hunting in WY in my UForce 1000 (maybe just went through some water) and it was touch and go there for a while; I was stomping on the brake as hard as I could yet going way too fast for my comfort. Yes I can engine brake but it eventually lets go and you end up stomping on the brakes anyway. There seems to be no way to hold the engine braking all the way down a hill else you just accelerate in low range and end up hitting the brakes anyway. Seems like a lot of work for 20% improvement but I'll take something over nothing. These stock brakes are horrible.
Glad you got that Beast to stop better 👍
@R.N.GPerformance
7 ай бұрын
Me too for sure.
U make stuff look so easy on your sites good job I love your site I’m from traverse city mi by the way
@R.N.GPerformance
7 ай бұрын
Thank you 🙏 I appreciate that allot.
Got my new 2023 uforce 1000 the 18th 1 mile on it so far enjoying it
@R.N.GPerformance
7 ай бұрын
That’s awesome 😎
Thank you for that video, I thought it was just mine on my 22 Cforce 600, as I've been trying to deal with the brake squel right from the factory. I will place my order for a brake cylinder on your site soon.
@R.N.GPerformance
7 ай бұрын
Your welcome 🙏. Thank you 🙏.
i spent years working under car shops (remember speedy, now monroe) Im sure master was an issue, but i think problem will not be solved with a solid rotor. vented rotors stop better, ive seen no evidence cross drilled or sloted solids do anything for stopping power, just better cooling.
Yikes, those rotors have some serious wear already!
@R.N.GPerformance
7 ай бұрын
Shit brakes lol.
Steve, Did you ever get your new slotted rotors built and available to help with the braking on these machines? Any other new braking items to help?
@R.N.GPerformance
13 күн бұрын
No because they were going to be crazy expensive about 130$ per rotor so we chose not to.
@tomg5376
13 күн бұрын
Steve thank you for taking time out of your busy schedule to answer my question, I really appreciate and that's why I've subscribed to your channel.
I saw you used DOT 3 fluid. Pretty sure it is supposed to be DOT 4. I have the Overland 1000 and she is on the portly side with her weight. The brakes work pretty well but I feel they could be better. Wondering if some quality metallic pads word make it better like EBC brand.
@R.N.GPerformance
7 ай бұрын
It calls for dot 3 or dot 4 they are the same fluid dot 4 just has a higher boiling point.
Awesome vid red 👍👍I’ll be ordering one for sure!! How do you adjust the e brake??
@R.N.GPerformance
7 ай бұрын
Thank you. You do it at the caliper I’m the rear. I set the ebrake then I adjust until tires are locked.
@adventurenorthhuntfishatvv3814
7 ай бұрын
@@R.N.GPerformance cheers mate 👍👍
Maybe need better rotors?
Any possibility you measured the clamping force at the calipers stock vs now?
@R.N.GPerformance
Ай бұрын
I did with the but dyno and it metered out that it stops way better.
@thadhaley941
Ай бұрын
@@R.N.GPerformance lmbo
I've been trying to find a clutch for my Z-Force 800 2017. Can never find it on your website for some reason
@R.N.GPerformance
7 ай бұрын
I have them. That would be the aluminum clutch cover one. rngperformance.net/shop-parts-accessories/ols/categories/cfmoto-clutch-kits
How bout if u run that hi pressure master with ss lines and dual piston calipers?
@R.N.GPerformance
7 ай бұрын
Possibly.
@huntinsutton
2 ай бұрын
I was thinking the same. Can't imagine clamped line ever being any good. Could you imagine that on a car 😅
Awsome video.. cant wait until I make this deal and get my cfmoto 800xc so I can start ordering some performance parts from you..
@R.N.GPerformance
7 ай бұрын
Heck yes that will be awesome 😎
@Bennett-xo6iu
7 ай бұрын
@@R.N.GPerformance have any preferences or how would I contact you specifically
What is the difference between the old and new master? Piston diameter?
@R.N.GPerformance
7 ай бұрын
I don’t know I could not tell you to be honest.
Heyy i just bough a 2023 uforce 1000xl i got no brakes at all have you tried anything else to get the beast to stop any better or is the master cylinder the trick
@R.N.GPerformance
3 ай бұрын
I tried everything. Different types of pads, new calipers, even put dual piston calipers on and none of it worked. The master is what worked for me. Some folks have bleed the system and got better brakes also. I bleed mine and no dice.
@Duster-pg8fo
3 ай бұрын
Ok sweet I'm going to bleed the brakes this week and maybe adjust the pushrod if no go I deff will order the master cylinder
Well ya know, you dont have a brake-booster so you have to work with that. If you wanted to get really fancy you could take the electric booster off of a Tesla-- I hear they're very clever bits of engineering heheh. Good to see you doing R&D to solve a basic issue. As an auto-body guy, seeing brake fluid touch paint causes me to squirm - - - That stuff is paint stripper. Pressure wash that Uforce quick! I wonder if you could find a better source for pads. I wonder if the brake pads themselves might be a weak spot. I'd do a little investigating and see if something exists, or if a company that makes excellent pads for other applications could be encouraged to make pads for CFMoto.
@R.N.GPerformance
7 ай бұрын
Right. Yeah I had thought about that. But would require allot of modifications and would draw some power. We are testing out aftermarket brake pads and they are no better then OEM. You hear the squealing in the video yup even the aftermarket ones are noisy. For me I’m sticking with oem pads they seem to stop just as good as aftermarket but they last allot longer.