Clean oil with the right viscosity and level is critical for the longevity of your bearings. Good job!

I forgot to add that th CFMoto oil change kit is a bargin for what you get.

Car oil in a motorcycle?? I dont know rick!

Hi, you used the wrong oil. your owner's manual clearly states the oil needs to have APISH or higher with JASO-MA2 being the primary choice or JASO-MA as acceptable alternative. This is on page 102 of the owners 's manual. What this means and it should be stated how important this is for the life of your clutch. Your oil choice is ok for just the engine. Motorcycles use the same oil to lubricate the engine, clutch, and your transmission. Straight engine oil will make your clutch discs degrade and slip burn. Transmision gears sheer oil faster than an engine does. For those two issues there is an additive package in the correct oil for that. That is why the correct oil for motorcycles is so much more expensive. Like $78.32 for a four-liter jug of Motul 7100 at Cycle Gear or Revzilla. I can't believe this video is at least two weeks old and nobody paid attention to what you were using and not say something.

@elliotradcliffe-cm8yf

26 күн бұрын

You know you can buy a service kit from a cfmoto dealer for each specific bike, and the 450 sr uses 10w40

@CharlesR.SteinruckIII

26 күн бұрын

Hello, I do not know why you sent this to me because I told Brandon the same thing 14 hrs. ago. Any way yes you are right.

You forgot to spit into the hole and rub the inside with you finger

NO NO NO New crush washer! You should NEVER reuse a crush washer they are a one time use ONLY