Thanks for the video. Excellent tips on using it. It is a great coating for both surfaces. I found that even on older trim that has been restored it tends to have that appearance mentioned on trim as it ages. From my experience it lasts longer on wheels with a second layer.

@SkyCarCare

Жыл бұрын

Interesting Mike, thank you for the feedback and info!

More priceless knowledge from Corey! You can't buy this experience/knowledge even if you had all the money in the world & he gives it for free! Thank you again! #BestintheBiz

@SkyCarCare

Жыл бұрын

Thank you so much Seth!! have a great week!

great video !!!!

Cheers for the video. There's obviously a lot of discussion re length of time its lasts. I am using Trim Serum now but am looking to move to this product. The question I have is the UV protection. Does it have any? I see no reference to it on the product or their web site. I want to use the product to protect a vinyl dashboard in a Mazda SP23.

@SkyCarCare

9 ай бұрын

Thank you! Yes, definitely has UV protection however I would advise against ceramic coatings on vinyl dashboards. They can wear or bond unevenly and there is no way to fix it if so... since you cannot polish the surface with abrasives. I would stick with a less permanent solution.

This is kinda scary. I've been using DLUX on all my new cars and have never had an issue but now I'll be wondering if I should whenever I get another car. It just makes the plastic look so much better, even on new car. Darker and richer, of course easier to keep clean as well.

@SkyCarCare

Жыл бұрын

I know, it looks Sooooooo good!! We are planning to do an update where we show how you would fix it if that worst case scenario ever happens... Hint: It involves a pressure washer and a lot of patience but I have had 2 customers that have done it successfully.

I’ve been using Dlux once a year the past 5 years for my wheels and the leftover on the plastics and really like it. I know the wheels should be polished but what about the windshield cowl? Is that something that should/can be removed to apply a new coat?

@SkyCarCare

Жыл бұрын

As discussed in the video - there is no foolproof way to remove a ceramic from textured plastic. You cannot polish the surface so it is very difficult to remove it. If you want to completely remove a ceramic coating then a pressure washer and patience is the only way to do it. HOWEVER, if the plastic looks good then there is no reason to have to try to do that. You can simply prep it well with APC and wash, then Eraser, completely evaporate and then apply another coat if the coating wore of naturally over past 5 years.

Hey cory, question... is dlux slick on the plastic... i used another product on my wifes car and after it was put on the next wash i noticed wash mitt drag on the plastic... these newer suvs have all that plastic body molding that is just a pain to keep looking good...dust collection is my pet peeve at the moment. 1st world problems lol

@SkyCarCare

10 ай бұрын

Hi Barry, ha, I know what you mean! I've never DLUX cause any drag on plastic. I wouldn't call it slick but things slide off it easier.

If you are doing fenders or trim plastic, would you tape off the painted metal surface? Or does it matter if cquartz flux gets on that part too?

@customerservice9897

Жыл бұрын

It will not damage paint, in fact you can coat paint with it as well. So if any gets on the paint then just wipe it right back off.

Do yoy thi k it work well on black piano plastic? I have it for my front grill...I had in mind to do my mags first.

@SkyCarCare

Жыл бұрын

Yes, for sure it helps but best thing is to PPF those strips if you can. Helps against those super soft areas.

Hey just wondering how long do I have to wait before I drive the vehicle after applying Dlux to my new rims ? Cause you know how to get a new pair of wheels and you want to go for a drive asap 😁.

@SkyCarCare

10 ай бұрын

Hahaha! good point :) The longer the better.... but technically you could do it within an hour... BUT if you hit mud and break dust and tar then 1 hour is not so good... If it was sunny and a short drive without hard braking and clean roads then no big deal. If you wait 12-24 hours then you should be very good. If you wanted BEST case then wait 3 days (but nobody is doing that) ;) Btw, sorry for my slow reply! Corey

Do y’all have a surface prep video with the prep /cleaning products mentioned? I think I also heard you say something about another product that would darken the plastic more but then apply this over it. I’ve got a bottle of the Dlux but I’m now cautious to use it before I prep more with the other products. My car is jet black so I’d like to get the plastic as black as possible.

@smokymountainconcealment5356

Жыл бұрын

Forgot to mention for plastic trim.

@SkyCarCare

Жыл бұрын

Yes sir, search our channel for "Eraser" and for "Solution Finish Black"

@smokymountainconcealment5356

Жыл бұрын

@@SkyCarCare awesome!! Thanks for the info 👍

Hi Corey, how long is the Dlux coating good for once opened? Ty.

@SkyCarCare

4 ай бұрын

All coatings will last differently depending on how much is left in the bottle. But a good average is just shy of 6 months if there is still half the product left in the bottle and it is stored in a dry cool place. Less product in the bottle will go bad faster.

What's your recommendation on time between 2 layers? Is just 1 hour usually fine or is longer (something like 4 hours) better for DLUX?

@SkyCarCare

Жыл бұрын

45 minutes to 60 minutes is best with Dlux. Definitely not longer than 90 minutes.

@vincentt8764

Жыл бұрын

@@SkyCarCare I did 1 day apart because of time constraints. How come no longer than 90 minutes?

@SkyCarCare

Жыл бұрын

@@vincentt8764 Great question! I considered mentioning that if you can NOT do it in less that 90 minutes then waiting a full day is best. If you do it after 90 minutes and before 6 hours then you have a area in there somewhere where it just interrupts the first coat and messes it up. Basically it is turning from a liquid to a gel and then a gel to a solid. Once it is a gel, it should not be interrupted until a solid.

@vincentt8764

Жыл бұрын

@@SkyCarCare Ahh that would make sense then. I did UK 3.0 about 15 hours apart because I overnighted it. Thanks for the knowledge!

Can CarPro Release be used over the top of DLux in case the car needs to be delivered sooner than planned?

@SkyCarCare

Жыл бұрын

Absolutely!

@seventysschev

Жыл бұрын

@@SkyCarCare Awesome. Thanks!

Question for ya: I tried the Cerekote on my window side moldings on my 370z - the lower section ( top of door - where glass and door meet - the straight parallel section). It's held up decently - can I buy some time with an application of Dlux on top of it? I did the cerekote about 4 months ago. The main challenge is that half of it is like a hard plastic, the other half is more rubberized. I'm debating buying new ones to have stored as the 370z is nolonger in production.. it's the only black piece on the entire car that's fading faster than I'd like.

@SkyCarCare

9 ай бұрын

Great question, I have not played with Cerakote so not sure how that might hinder the bonding or penetration of another product but I would go with Ultima Tire & Trim Guard due to the two differing materials and its ability to play nice with all.

@07wrxtr1

9 ай бұрын

@@SkyCarCare Okay I'll give that a shot... I should also just see what Nissan charges for those and keep some on hand

@SkyCarCare

9 ай бұрын

great idea @@07wrxtr1

I am a little undewhelmed with it, on trim yes, its very good, but on my wheels wich i coated with a double layer after just 2-3 months the coating is super clogged - i wash them weekly, sometimes a full wash with pressure sometimes rinsless (as i have a communal garage) i always wash my car and my wheels with DI water so there should be no mineral buildup - also they are my summer tires so they dont see rain (i dont drive in the rain, its my special car), on my weekly maintenace i use BH Surfex HD 1:20 and i clean them with Hurricane Wash mit, someone advised me to use a Waterspot remover but still, there should be NO mineral buildup as i use DI water. Didn't use IronX yet on them - trying to minimize rusting wich these chemicals induce (i know they remove iron buildup but used long term and often induce rusting on the calipers and rotors). So not a great customer experience as a LOT of effort went to prep these (put DLUX also on my winter wheels)

@SkyCarCare

5 күн бұрын

Hmmmm, that is definitely not a normal experience. I am curious to the culprit and if the IronX solves it or if it did not bond for some reason. What is the finish of your wheel?

@victoryensured7137

5 күн бұрын

@@SkyCarCare High gloss black B-spoke 791m BMW wheels (if i remember corectly wich i probably dont) 19 inch i think it bonded great (but maybe im wrong) as i got a little highspot in one of the wheels barrels but i dont know, still - im sad

@SkyCarCare

4 күн бұрын

@@victoryensured7137 If they have a urethane clearcoat then should work GREAT. If it is an acrylic single stage paint then not so much... Is the high spot still there? Well, if you purchased it from Sky's the Limit then you should hit us by email so we can help you or refund you if we cant solve it for you.

@victoryensured7137

4 күн бұрын

@@SkyCarCare its clearcoat, and i bought it locally, just venting my disappointment with the product, as i always take Carpro to the highest standard, the highspot is actually the one place when the coating didn't fail (or clog i will try to decon it properly with DIY waterspot remover or Descale and a proper IronX treatment), i put two coats and it wasn't my first dance with ceramic coating my wheels, just my first with DLUX. Maybe it was my error, still, thank you for your anwser and support! I really like your channel and your content.

@SkyCarCare

Күн бұрын

@@victoryensured7137 Thank you! And my pleasure 😃

How long would you recommend leaving the ceramic on plastic before wiping off?

@SkyCarCare

3 ай бұрын

Generally you kind of just apply it smooth and work it in until it is perfectly even in smaller sections. If it is being over-applied then I would say wipe off excess within 1 minute depending on temps.

Ive just bought brand new rear lights (plastic) for my car, and ive bought DLUX. My plan was to coat them to protect against UV. Will this be okay, and what could i give the lights a light polish with before coating, as even though theyre brand new they have swirl marks on. Thanks!

@SkyCarCare

10 ай бұрын

Hi Ben, GREAT question. Very important... do NOT polish new headlights or tail lights. The UV protection layer built into them new is stronger than any ceramic coating on the market. Polishing would remove that OEM protective layer. You can go ahead and just wipe them down with CARPRO Eraser and then apply the DLUX. Since they are brand new, there is no polishing needed. Best, Corey

@benbirch2393

10 ай бұрын

@SkyCarCare thanks so much for the answer. Although my lights are brand new, they do have visible swirls in so i was thinking i need to do some sort of light polish (hand polish?) Just to clarify them a bit?

@SkyCarCare

10 ай бұрын

Ohhhh bummer! Totally understand. In that case you must polish if you want to remove the swirls. But machine is fine or by hand if you do not have machine.@@benbirch2393

@benbirch2393

10 ай бұрын

@@SkyCarCare thanks, yeah I'll do it by hand - wjat polish do you recommend for that? Thanks again!

@SkyCarCare

10 ай бұрын

CARPRO Fixer unless you have something else on hadn't already.@@benbirch2393

So after a year If I want to coat it again what should I do? Just do all step all over? Cheers

@SkyCarCare

Ай бұрын

Exactly right.

How long roughly would it last on polished wheels? Car is only driven once a weekend in summer time only

@SkyCarCare

9 ай бұрын

On polished aluminum I have not seen any coating stop it from oxidizing. It seem the moisture still reaches or is absorbed into the aluminum and it can discolor under the coating. I would recommend using the Ultima Aluminum Guard Bundle from our site for this and just do it once or twice a year

@stevecheshire5046

9 ай бұрын

@SkyCarCare sorry, I didn't mean polished, I mean chrome.

@SkyCarCare

9 ай бұрын

Hi Steve, on chrome wheels it should last a LOT longer than polished aluminum but will not last as long as clear coat.@@stevecheshire5046

Can I apply DLux to weathertech floor mats ?

@SkyCarCare

11 ай бұрын

Yes, you can.

how long would dulux last on a restored headlight instead of clear coat and would dulux or carpro lite be better for headlights??

@SkyCarCare

Ай бұрын

Likely about 1-2 years (depends on how often, how long, and where in the world it sits under the sun). Dlux woud be better than Lite for headlights.

@roysla

Ай бұрын

@@SkyCarCare Caribbean and most likely 24/7 ouside. would 2 coats increase durability?

@SkyCarCare

Ай бұрын

@@roysla Yes indeed it will help durability.

I purchased a vehicle that is one year old. I will be contacting the dealer to identify what type of product they used on the plastic trim. Would you caution against using the DLUX on a one year old vehicle?

@SkyCarCare

6 ай бұрын

Hi Michele, that depends. I am less hesitant to use ceramic coatings on it after a year has passed but it is still a use at your own risk scenario if it is textured plastic and cannot be polished.

@user-xq6ye4kt9b

6 ай бұрын

Thanks for the information. This is very helpful!@@SkyCarCare

@SkyCarCare

6 ай бұрын

Our pleasure Michele!@@user-xq6ye4kt9b Best, Corey

does dulux do well on headlights and how long after can i use reload? whats the life range after bottle is opened?

@SkyCarCare

Ай бұрын

So Dlux is suited perfectly for headlights! Reload can be used an hour after. Life range of an open bottle varies depending on how much is left. Usually on a 30ml bottle that is half full, you have a few months to use the rest of that product.

@roysla

Ай бұрын

​@@SkyCarCareas the car is outside 24/7 any recommendation of a product to help with rain inoder to cure properly?

@SkyCarCare

Ай бұрын

@@roysla Dlux cures pretty fast but Reload can be applied after 1 HOUR! To help protect from rain... Sorry for the typo above - fixed.

Can you put a second coat 48 hours after?

@SkyCarCare

Жыл бұрын

Yes but best practice is to apply second coat after 1 hour.

Is this ok on piano black plastic trim?

@SkyCarCare

5 ай бұрын

Hi Michael, absolutely! Best, Corey

@mharro88

5 ай бұрын

@@SkyCarCare would it cover existing scratches or marring?

@SkyCarCare

5 ай бұрын

Great question, no it would not. Or at least only if it is very very fine. DQUARTZ GO seems to cover fine marring even better than DLUX@@mharro88

Is 1 layer ok ?

@SkyCarCare

5 ай бұрын

Yes it is

He must be in Fight Club and the first rule of Fight Club....

@SkyCarCare

6 ай бұрын

Shhhh 🤐