Nice job. One thing I would use is some high temp red grease for the bearing and some locktite on the screws. You can also use the drain plug first before pulling the differential. Nice job though.

Fantastic video! The camera angles were perfect and the step by step made it look easy...

Great video man, no bs just straight to the point. Looking to do this soon on my Scrambo.

@TheHowToGuy

5 жыл бұрын

Thanks, we try not to have any fluff, just give people what they need!

Great video, super clear and no BS... good job.

That’s what I have on mine but the dealer found the torrid was rubbing on inclines. So he had to grind it down a little. Great video! Sharing this with a few others for sure!

@TheHowToGuy

6 жыл бұрын

"Torrid was rubbing on inclines", I don't know what this means, this is my first ATV....LOL! Explain a lil bit better for me!

@NorthCountryBoyz

6 жыл бұрын

Stupid iPhone always correcting my spelling. LOL. Tie rods. The tie rods when on an incline to the left or the right where ever they were being maxed out downwards would rub on the stem of the pinon plate. So they did a little light grinding not to take away from the dexterity of the pinion plate so it didn't rub on it when steering. I will see if I can get a picture for you on what I mean. If you use instagram add me: northcountryboyz315

Great video man I got to do this soon

Nice video thanks man hopefully getting mine soon, getting a snorkel anytime soon? I would love to see a video from you installing it.

Great video. Good tutorial. I just bought a used 2018 Scrambler 1000 and read that Polaris changed the pinion cover to steel. Im taking my chances with the stock part so I'll let you know if I ever run into issues!

@TheHowToGuy

4 жыл бұрын

I heard the same thing...AFTER I bought mine! LOL!!!

Great Video

Did you drain the diff fluid first as well? or just let some of it drip out? Also, is it good to heat up the yoke first before getting the pin out? torch or heatgun is you can?

Do u remember what size punch that is

Awesome man!! You must of replaced the diff oil? Thanks for sharing

@TheHowToGuy

6 жыл бұрын

We lost a little bit during the change so we added some back.

Question for you my friend, the plastic engine guards, is it just plastic rivets holding them in place all the way around? The dealer forgot to put mine back on when they serviced it. They sent me new guards but no hardware..

@TheHowToGuy

6 жыл бұрын

Show me a pic of the area you are talking about so that I don't tell you the wrong thing!

@DirtObseXXion

6 жыл бұрын

The How-To Guy The plastic engine guard inside the wheel well, covers the gas tank.. I'm not home to take a pic.. looks like rivets in your vid. Thanks man!

@TheHowToGuy

6 жыл бұрын

Going to the country tomorrow to go get it, I'll check then! Stand by!

Really should torque to spec with a torque wrench just to be safe. Do you know the factory specs by chance?

@TheHowToGuy

5 жыл бұрын

NO, but I will look into that ASAP, good looking out!

Polaris has addressed this issue already. Fortunately

@TheHowToGuy

4 жыл бұрын

Yeah, people were telling me right as I was going to do it, but since this is my first ATV ever, I said, F it, might as well! LOL!

@JoseMartinez-mm8gj

3 жыл бұрын

How? They offer warranty if the diff breaks or what?

Did they correct this issues on the 2019 models?

@bigmoe8344

4 жыл бұрын

I just picked up a 19 yesterday and was wondering the same thing. I though I heard it was fixed but domt know where I heard it at

Sounds like F-18s flying around your house lol

@TheHowToGuy

3 жыл бұрын

Va Beach!!! Hell Yeah!!!

Why do u need to replace the factory one ?

@TheHowToGuy

5 жыл бұрын

We were told that from all of our Polaris riders that its a weak point. Better to spend $100 than 1K to fix the gear.

@JTHAMMER12

5 жыл бұрын

The How-To Guy are there any other “weak points” that need to be addressed?

@Marine2111usmc

2 жыл бұрын

@@JTHAMMER12 the whole frame lol. Look up Cecco Racing.

You doent need to do it on the 2018 sportsman just the 2017 and older

@TheHowToGuy

6 жыл бұрын

Oops! Haha! I wasn't sure, so better safe than sorry! LOL!

What’s the purpose of this change out anyways

@TheHowToGuy

4 жыл бұрын

The factory housing cracked under stress. BUT...Polaris said this was fixed with the 2018s, but I did it anyways!

You forgot to emery cloth the gear lol. Jk.