Awesome video! I've been waiting to hear your review on the custom CCM's since seeing Tommy wear them in previous videos. Now I'm looking to get my own pair of custom ASV pros ASAP

Great video. One thing is a bit confusing. Tommy (hope I am writing this right) used to say in the video that the Ribcor 100k skates are much better than the stiff Tacks. Now he has a custom ASV Tacks?

@andersborum9267

Жыл бұрын

I think he compared the Ribcor 100K to the AS3 Pros, but am not sure. Remember to take everything said in these videos with a healthy dose of salt.

How do you like the asymmetrical setup? That's something I considered for my pair, but decided against it in the end.

Where do you even find the options for spec? I can't find a custom option anywhere on CCM's website.

I kinda want to have the scan done. I've been skating out a lot more than goalie and I have short wide feet. The wide fit actually works the best of any retail skates I've worn but I'd love to see what they say.

Former Bauer gear guy here…CCM equipment (pads, shins, etc.) >>> Bauer equipment

@LeafsFan8034

Жыл бұрын

Yep

@LeafsFan8034

Жыл бұрын

Ccm>Bauer

@gcs8889

Жыл бұрын

Skates I'd agree on. I've been skating on Bauer's for ages. The single piece boot design of CCM feels much more high end than Bauer's design.

@Acyclistandhockeysnob

Жыл бұрын

@@gcs8889 I've been in the Mono Boot tacks since 2016. Had my AS3 skates stolen a couple of weeks ago and had to buy a pair of Vapor 3x pros and honestly can't tell the difference. And I skate 4 nights a week.

@Acyclistandhockeysnob

Жыл бұрын

So you guys posted about most players including yourself don't need the pro model skates, so why do you keep talking about pro level skates and never talk about the next step down?

I am in for custom plus also. But still have questions. Wat is the advantage with a symmetrical? Higher boot and lower laces up front and down below. I have always problem with forward stretch my tong is to stiff I think so I have my laces on top not tight. But I have rather a less stiffer tong. So I am gone try a few of them to see what’s the difference. Why didn’t you guys asked for that. If a 4 mm is better for skating but less protective then I have a hard choice. Greetings Mikis from holland.

need to mold before using? ccm custom vs bauer custom vs true custom?

HI, I am curious about how you and Tommy feel about the retail pair of AS V pro. If possible please make a review of using the skates.

You guys should do a tier list of all the sticks or skates released during 2022.

Does anybody have experience during the baking process of retail AS-V PRO skates that also outer carbon composite shell can be molded? Or just inner foam can be molded? Thx

I wish this video was available a couple months ago! I wonder if the CCM ordering software is different in the UK compared to the US? I placed an order for the Total Custom Plus on the ASV Pro, and the retail location didn't show the look of my skate OR offer as many customized options (unless the rep just wasn't aware of those). I also had to specifically request the ankle cut that is exactly like yours in the video (straight across, and not angled down like the retail ASV skate). However I also didn't get the new flexible tendon guard, and they installed a much smaller and stiff tendon guard...??? Great video though! Anyone considering the custom version MUST watch this. Super helpful. *And my personal vote on the two custom skates, I prefer Chris's version ;-) Both look great though! Cheers gents

Congrats on 14 years!!

I love the ability to fit the skates to the person. I have a high instep and the regular boot does not lace up tight. The wide skates are too big for my foot. So hard to find the right skates and try on so many to get that right fit. I am a low level player but it helps to have the right fit. It is like basketball shoes before there were many choices. Skates did not give you this. You have to adjust the size of the skate, width of the skates. And they bake them to get the best fit. I would rather spend the money to get that custom fit. So much better. Awesome video. I will be saving up for this when this skate I am in breaks down and needs to be replace.

Great video. What blade profile do CCM custom skates come standard with?

@petrvana2565

Жыл бұрын

single radius 10 ft

@85dbs

Жыл бұрын

@@petrvana2565 cool, thanks

how does one go about ordering a pair of these?

When are you going to review the Bauer Mach skates?

What was the additional cost from Custom to Custom Plus?

I didn’t get the plus but I got the total custom and it was a world of difference vs the retail. My foot is so comfortable in my skates. Definitely worth the money if you’re able to afford it.

@andersborum9267

Жыл бұрын

What was the extra charge over retail?

@andersborum9267

Жыл бұрын

Care to comment on the price of custom vs. retail pricing? Need to replace a set of AS3 Pros as the carbon is starting to crack on the left side of the left boot (3 years worth of heavy duty use, so am quite happy with the lifetime).

@Hartwell10

Жыл бұрын

@@andersborum9267 customs are roughly $200 more than the retail version. And the total custom plus are about $400 extra. This is speaking in CAD

@andersborum9267

Жыл бұрын

@@Hartwell10 planning on going to sweden to order a custom set of FT6 Pro soon as the store just notified me they're about ready to take orders.

That's the perfect skate for YOU! 😃👍 I prefer for ME black/yellow/gold, like Bauer/Graf design with a much softer tongue and yellow/black waxed laces. 😉

How did you customize the "Comfort edge" around the ankle at the top of the boot? I have been asking my local Pure hockey shop & they said this isn't an option with the custom skates. I have ton of pain in this location & 1 of the main reasons I am looking at custom skates is to get this resolved. To not be able to customize or add more padding to this portion of the skate I find to be ridiculous. Then looking at your skate, it seems there is more padding & better shape than the retail version.

@HockeyTutorialOfficial

Жыл бұрын

That’s how all the custom skates will come. The custom boot is made in North America. The retail is made is Asia. Different materials and the neck of the skate is a totally different shape

@frankmomma

Жыл бұрын

@@HockeyTutorialOfficial Wow this would change everything. That's the only reason I haven't pulled the trigger on these skates yet.

Will you have to bake them?

They scanned his feet and should know what skate is good for him.

@straighttimestirrups

Жыл бұрын

That confused me too! You’d think the scan would dictate which size and shape would be the correct ones and pre-selected.

@SuperSokol7

Жыл бұрын

​@@straighttimestirrupsHe gets his foot scanned and also asks what his skate size is. The scan should tell you what is the best shape and size fits you best.

Now you guys should do true custom vs ccm total custom. I am trying to decide which one to get.

One of the best videos yet. I have a new pair of total custom plus and I had to make some decisions. Seeing you guys make some different choices gives me some closure on if I made the right choices. Great work. Custom 76> all the rest

@XcrewX

Жыл бұрын

How do you get custom skates is it on the website or something?

@davidanders1687

Жыл бұрын

@@XcrewX pretty sure you have to go to a store for foot scanning and everything

Like your reviews and very informative Is that a Tudor Royal 😀 Greetings from Netherlands 🇳🇱

@HockeyTutorialOfficial

Жыл бұрын

Thank you very much. Haha great eye! It is indeed. I love watches

@aubreyhaines7282

Жыл бұрын

@@HockeyTutorialOfficial hahahaha why not ! I just bought a Tudor Ranger 😃 a couple a weeks ago and recent a pair of AS3 pro’s and Step steel runners 🏃‍♂️ And yes I already have the Royal Day Date and several other watches But as a Canadian that lives in holland I sure have to own a pair of CCM’s My father … a Army and Airforce man in. Canada did have CCM tacks in the early days ⛸️👍 Again Like you’re reviews

Your custom ASV Pros look SicK!

I definitely prefer Chris's colourway to Tommy's and the retail gold is terrible in my opinion. I went with blue and grey personally.

Do a video on the true catalyst custom vs the true svh customs.

Tommy's but my double runner powerslides are faster :)

Disagree with Tommy on the thickness of ankle padding in the Ribcor. I found it lacking.

i honestly don’t really see the point for total custom + because how would anyone know what to change yk 😂 i’d just pick regular for everything cause i wouldn’t know

@mattiashockey17

11 ай бұрын

Exactly you don’t know anything he’s talking about, so you wouldn’t get any benefits, but for ppl that do know then it’s worth it.

Tommy FTW

Hockey Tutorial, should be two words on the blades.

Those are ugly Chris… but awesome video! Lol

@HockeyTutorialOfficial

Жыл бұрын

😂😂 thanks and thanks