very helpful, thank you

Very good job man , you briefly broke down 1 million points in a very short time.

Rare to find these kind of videos, great information, really helpful

Beautiful video. Very wise. Gained so much knowledge with this👍

Thanks for the info, very helpful. Hopefully my problem only ends up being the a bad wastegate on my Land Rover.

Stuck swirl flaps in the manifold can also make the boost pressure go up. Happend to me once.

I have a 2013 Ford Escape I don't know if it matters if it's from Canada or not it was imported sold in the US Michigan the Motor City. I've replaced everything from the turbo to the solenoids to the diverter valve. I still can't find what the problem is. Would it be buying an Amazon solenoid turbo solenoid I read somewhere where it was best to have the Ford product if you're still getting these issues I just don't want to spend $100 for the boost solenoid I have bought three of them now? Any help is well appreciated😊

I have a 2013 Chevy Cruze. Replaced the turbe a couple of years ago. Today I picked up a PO234 code, and only that code. How would I troubleshoot the wastegate and boost solenoid?

@kristoffer9873

4 ай бұрын

Test the wastegate with a vacum tester. On top of the turbo as in the video the actuator has a hose going in it. Remove the hose and put the hose from the tester. Search up on how to test and you will find a video.

Iv done all still the same issue

I got this error too: 16618 boost presure regulatiom p0234 - 000 - limit exceedee (overboost condition) on my VW Touran '04. Happened while going down a valley 10°, i had like 100km/h and i pressed the acceleration, a little bit over 2000rpm and i felt like cutted the turbo. 🤔🤔

@ryanfellowes4639

2 ай бұрын

You get this sorted mate what was the reason same has happened on my golf