Lots of horsepower there

The D8 is a nice machine, nice find 👍

Spectacular close up and nice job 👍🏽

I like it, don’t see that too much where I’m at.

Those are good no joy stick

I fail to see why front scraper couldn't grab a load on the way in . They're coming in downhill and get pushed by a dozer , uphill ?

@tomasneel1980

24 күн бұрын

Or both work in tandem like they were designed too, that d8 is hindering production,

@dennisholst4322

13 күн бұрын

Maybe they don't want any tailings there

Great stuff! Where is this? Looks like a place I know in Kansas.

@Engine201

3 жыл бұрын

This is in Maryland, thanks for watching.

@richardperry4460

10 күн бұрын

If it was in Kansas we would be using the machines like they were designed for run.d8 dozer is in the way if you can't cut that dirt cut with thise push pull scrapers

@richardperry4460

10 күн бұрын

Need new operators for scrapers. They should be pushing pulling almost all the time

Second sraper didnt engage rear engine, plus there puch pulls

That d8 is hindering production, there is a reason they are called ‘’ push pulls’’ . A fully loaded scraper will load its partner by pulling it quicker in shorter. Distance..

what arough job ridges all over the place i dont know how they stay in the seet

5-7 seconds in the cut! Your loaded, get the hell going! The extra time the scrapers are taking adds up to alot of missed loads by the end of the day. Also, if you're the second scraper in line and your right up the ass of the one in front, then take a second to drag your haul road! Smoother haul roads and cut and fill sites lead to more loads and less wear and tear on equipment. Which leads to down time! Good grief! If I was the foreman on this job I'd be loosing my mind!!

Whoa even to the end of video pushing Up Hill pushing push pull scrapers UP HILL, WTF .been doing it for 30 years if it was me and I didn't have the gps on that 8 I would have slammed both of them, hook up gps cat has more to do than babysit just saying ✌

It's hard to even watch these two operators. Someone needs to spend a little time teaching them how to operate correctly. That 8 doesn't even need to push those scrapers if they were correctly instructed. What a waste of fuel and time. Money falling through the cracks. SAD

Chaos, realy inefficient.

Not a efficient operation to be nice .

Not very good operators

@deanratkovec2271

2 жыл бұрын

Some of the worst scraper operators I've seen