Hi mate. The "CATCH CAN" you are showing is an OIL SEPARATOR ProVent 200. Its size is good for up to 200 KW. A better choice in most cases would be a ProVent 150, which is much smaller and has 20 mm ports for in and out hoses. Neither of them is a catch can. It is an oil separator, which requires continuous bleeding, ideally with the slush getting collected in a separate container installed somewhere below, where it can be emptied less often. Thanks for the video, OIL SEPARATORS do help your engine. For those who are planning to install one on an engine that has less than 150 KW, check the size and the ports diameters and the overall size of the ProVent 150. It might be better for you. Filters last for 1000 engine hours, they can be even installed tilted up to an angle of 45 degrees from horizontal. And don't forget to remove your intercooler while at it, and clean it from the inside and outside too, with technical benzine, or solvent spray (break rotor cleaner). Let dry out completely before starting the engine! This will get the efficiency of your intercooler back to normal. Thanks for the video. Be good. Eddie

Thanks for the video, I'm installing mine this weekend

Catch cans are a creat investment and do what they are designed to do. Big fan of Berrima diesels great bunch of lads 🤘

@RoundTheFire

5 жыл бұрын

Legend 😎👍🏻🇦🇺

Thanks! Made it easy for me to install myself. Really appreciate the video 😀

First thing I installed in my MQ Triton mate. Great vid mate.

@RoundTheFire

5 жыл бұрын

Cheers mate 👍🏻, definitely a good way to go to keep the donk ticking over sweet well past the old warranty period 🍺🇦🇺

Good job mate, would be interesting to see the intake after the installation, for some comparison of carbon buildup between catch can and no catch can.

Very informative thanks mate now I just need to buy a raptor and the kit and I’ll be set

@RoundTheFire

5 жыл бұрын

🤣 All good mate, there is a kit to suit just about every rig. Best of luck with your next comp. I’m looking forward to our collaboration trip next month 👍🏻😎🍺🇦🇺

Good tutorial damo. Love the high speed assembly with those sounds. Sweet. Let us know how the can performs

@RoundTheFire

5 жыл бұрын

Cheers Paul, hopefully I can do a follow up video in a few months 👍🏻

Measuring time in beer - best way to tell me how long it’ll take!

@RoundTheFire

4 жыл бұрын

Works for me too 😁👍🏻🍺

I have one in my Pajero. Change the oil every 7500k. Drain 100ml of oil and the same in water each change. Best thing ever to put on a diesel.

@RoundTheFire

5 жыл бұрын

It took me a long time ‘wondering’ about a can before I finally decided to install one. Bloody great idea 👍🏻

Great video mate !

@RoundTheFire

4 жыл бұрын

Cheers Guys 🍺

Took 2 beers but I'm the type of guy that will push it out to a box and a 2 man job and the wife wouldn't have a clue 😁

If you have the time I would love to see an engine break down vid I had no idea thats how it worked at all.

Nice one Damo. Easy to follow not much room left there. What's next a snorkel 👍😎

@RoundTheFire

5 жыл бұрын

G’day Phil, Thanks mate, definitely couldn’t squeeze much more under the bonnet!! 😳. Not too much more left on my list. Snorkel, self recovery (winch) and some frontal protection might round out the vehicle I think. Possibly some other small stuff, pre-fuel filter and some side work lights. Maybe look into stiffer rear springs to neaten up the ride height with a trailer on 🤔 👍🏻😎

@philipw7557

5 жыл бұрын

@@RoundTheFire sounds like a pretty good list. I'll waiting to see how it goes. 😎👍

@b0wen11

5 жыл бұрын

Hey Damo, i got my Raptor snorkel from Fabulous Fabrications up there in Brisy a few months ago. highly recommend. Just tell them Damien from NSW sent ya!

@RoundTheFire

5 жыл бұрын

😎 cheers mate I’ll check them out 👍🏻🍺

Damo, good to see another video mate. Not a lot of room under the bonnet to install the can. We will have to see in the future how much oil it will collect. Looks like you are having nice weather for the middle of winter. 44c here today in Arizona today. What part of Qld are you in ? Take care, cheers .

@RoundTheFire

5 жыл бұрын

G’day Scott, welcome back mate. She’s certainly tight for space under the bonnet. Bloody brilliant winters day today here in South East Queensland. I’ll be keeping an eye on the can to see how it performs, I’ve heard good reports about this particular brand so I’m very optimistic 👍🏻 I was really surprised with how much muck was already accumulating in the OEM vent in such a short time. I’ll sleep better now that I know the big rig is breathing some clean air. 😎

Great Video for those of us that are not sure about fitting them. The only thing thatworries me is that once you fit one of these you then void all warranty on the engine. I asked the ford mechanic when my 2018 went in for its 15000km service and thats what he said, so i have been a bit worried about fitting one since.

@RoundTheFire

4 жыл бұрын

Peter, thanks for the comment mate. That’s very interesting to know. Who would have thought fitting something to help the engine would be against the manufacturers best wishes? 🤔

@RoundTheFire

4 жыл бұрын

Funnily enough when I asked my dealer what would or wouldn’t void my warranty the only thing they said to me was “if you change your tyre size then you will void ALL warranty”!!? 😳

@bjornefellhanded9708

3 жыл бұрын

Interesting. I asked Ford for confirmation in writing that it wouldn't invalidate the warranty on my 2015 PX ranger. I got it (2017) then installed the Provent 150 and FM kit. *Edit* Just thought I'd throw in I'd heard horror stories of additional pressure and blown seals and the like but it seemed most likely that they'd been installed in reverse. Makes sense with that context.

A good alibi for some me time, and beers.. enjoyed your vid all the same

@RoundTheFire

4 жыл бұрын

Cheers Mate

As usual another down (to) earth video. How about the ride in general? Could you give us some updates during a future video regarding the tub liner and other warranty issues? The daily use feeling and what is missing? And what would be a future tyre choice. And if bigger, what fits without mods?

@RoundTheFire

5 жыл бұрын

Henri, thanks mate 👍🏻 I’ve got something similar planned but will add in the extra info. Thanks for the suggestions 😎

@henriwolbrink

5 жыл бұрын

@@RoundTheFire Hi, last week I was able to see the first Raptor registered in Spain and did notice that some details are different then the Asian market specs. It comes standard with a roll bar/spoiler like the Wildtrack, as well as a rolling cover on the bed, with 2 crossbars. But I also noticed that the space behind the rear seats is gone. And the tub had an indent, filling up the space behind the rear seats, and thus creating a nice space for some Lithium battery packs. Maybe there are other differences that I haven't spotted yet, but I will let you know. Regarding the front view. I think it should be easy to add a small camera in the front, and mount an input signal selector. This will then either feed the rear camera signal to the sync-3 or (when reverse signal switches off) the front camera signal. As the camera screen is delayed for x seconds, or when driving a certain speed, it would be able to change rear to front camera when changing from reverse to drive mode. Total hardware below 50EUR.

@alexwolf8019

4 жыл бұрын

@@henriwolbrink how are you tying into the front cameras with sync 3? Ive been looking for a way to do this.

@henriwolbrink

4 жыл бұрын

@@alexwolf8019 Still waiting for the part to arrive. But the most difficult will likely be not to damage the dashboard while connecting video signal. And I rather proove it working before sharing.

@alexwolf8019

4 жыл бұрын

@@henriwolbrink Please share if you do.

Thanks Mate.

@RoundTheFire

5 жыл бұрын

Cheers Barry 👍🏻

Installed the greddy brand one on mine after you explained it to me on the ig! 😂

@RoundTheFire

5 жыл бұрын

Which one did you use?

@RoundTheFire

5 жыл бұрын

Ahhh I just looked it up, the G-Reddy 👍🏻😎

@jamesreinalddizon445

5 жыл бұрын

Round The Fire yep! Do you plan on getting a steel bumper?

@RoundTheFire

5 жыл бұрын

I am looking at something for the front, mainly to mount a winch. So far my favourite steel bumper is the Option 4wd Elite bumper. I think that one is made in BKK. If I can get a hidden winch mount that bar is my number one choice right now 😎👍🏻

On ya Damo, brilliant vid. I like the old way though......hose hangin down below the motor venting all the good stuff, I can hear the environmentalists beating a path to my door now🤣. You’re right though, why clog up a clean system with gear that’s only on for emissions. Everyone wins in the end, you and the environment. The Berrima felllas aren’t too far away from me in this brilliant ‘blues winning’ country.......we’re always sending good things to you QLD’ers lol. Top video mate👌👌👌

@RoundTheFire

5 жыл бұрын

🤣 G’day Chrisso, I liked the old way too mate, I liked it when life was simple, few tins after work, durries were healthy and riding in the back of the Ute was no worries! But you know these days, do the right thing, slip, slip, slap and all that good stuff...not really sure how I survived this long!! 😂 I wouldn’t mind getting down your way for a look, also go in and check out the BERRIMAH store in person, see how all the magic happens...As far as the colour blue goes...wouldn’t know about Mate, I’m a Territorian 😂😂👍🏻🍺🇦🇺

Upgrade your drain hose that type of pvc material is going to heat temper warp and shrink etc etc

My second question comment is shouldn't they be installed in a way for a "vaccum" with check valves on both turbos hookup to left and right

did you have any issues as the result of installing the catch-can? I am getting blowback and the mist is leaking where the intercooler hose connects to it so I am thinking of getting one.

How long does install take. Oh...about 2 beers. Epic!!!!!!!!

Hey Damo, just wanna ask you where do you connect the drain pipe at the base of the catch can? Does it return clean oil back to the sump or does it just drain away?

@RoundTheFire

3 жыл бұрын

The drain pipe has a tap on the end. Min just hangs below the vehicle and I empty it every 5000ks 👍🏻

What is the purpose of that catch can bro.? Is that compulsory needed in a bi-turbo raptor?

I ordered a jtl catch can mines mounted just behind the radiator on passenger side of vehicle in the front of the vehicle

I have a usa 2021 ford ranger 2.3 ecoboost dual turbo.. should I install dual catch cans on left and right side of intake manifold before the turbos?

@jimh.412

Жыл бұрын

The 2.3L Ecoboost is a single turbo.

Hello damo, i am a subscriber and what youre doing on your rig like putting dpchip etc, im doing the same...hahaha ranger raptor owner here from the philippines.. like you mentioned on this vid, how does catch can reduce our engine performance..what are the pros and cons of installing catch can? Looking forward on your response..god bless

@RoundTheFire

5 жыл бұрын

Gday mate, nice choice of truck 👍🏻😎 main points to keep in mind are to make sure the catch can is the correct size. The benefits of the can is to keep all the oil fumes out of your intake system keeping the turbos and inter cooler healthier. 👍🏻

@almahdieddun9688

5 жыл бұрын

Round The Fire thanks for the fast response, any bad side installing a catch can? What is the ideal size for ranger raptor oil catch can?

Have you noticed any oil or build up in the pipes before the catch can?

@RoundTheFire

5 жыл бұрын

Not really mate. The first time I’ve ever pulled off the inlet hose to have a look was to put on the can. I didn’t really think I would find too much with such a new engine but I was fairly surprised 👍🏻

Look I agree totally with you guys, but as it's a modification to the engine, that's enough to void the warrenty.

@myretrogamehub

3 жыл бұрын

Doesn't actually void the warranty as long as any aftermarket products/parts that is installed isn't the cause of the malfunction. I've checked online and also confirmed this with my Ford Dealership in Ringwood because I purchased my Ford Everest Sport 2020 Bi-turbo 6 months ago. Looking to install a catch can to mine very very soon.

How does a catch can reduce engine performance?? Also modern diesels need them more so than older diesels....🤔🤔🤔

@RoundTheFire

5 жыл бұрын

G’day Mate, I think most of the talk around a catch can reducing performance is from people installing a catch can that is entirely too small or not maintaining/draining the can on a regular basis. I forgot to mention that at the end of the video. 👍🏻

Hey mate, how's the catch can been going? I wanna put one in my ranger wildtrak I just got

@RoundTheFire

4 жыл бұрын

G’day Mate, I’m happy with the Pro Vent system, works very well (I haven’t tried any other type) I drain it every 5000ks the amount of oil it catches that your engine is supposed to cycle back through has to be seen to be believed. Well worth the purchase especially with how fine the injectors are on the new WildTracks identical to the Raptor.

@CyniX93

4 жыл бұрын

@@RoundTheFire Thanks for the reply mate, I hear good things about ProVent compared to other options, just ordered one :) Happy Australia Day !

Do you think the gas after the can is good for the Engine? I think it is not good at all because it is CO gas or steam whatever...and it can not be fired again. Turbo is for getting Oxygen to support the fire in the piton, and the gas after the can is not oxygen. So i think we should let it go out of the turbo to protect our engine.

@RoundTheFire

4 жыл бұрын

G’day mate. None of it is really good for the engine, however the cab allows you to take out as much of the oil residue you possibly can keeping that all out of your turbos and intercooler. The best option would be to vent direct into the atmosphere as was previously the case with vehicles but now due to emission laws it’s illegal here in Australia to do that. Not such a bad thing considering the future for our kids 👍🏻😎🇦🇺

Really should put AUS in the search thanks usa vehicles are opposite drive train

12:14 took you 1 hr or two beers, I could drink a carton of beer in 1hr ?

@RoundTheFire

4 ай бұрын

Hands down best comment I’ve ever had!! Bloody Legend 🤣🤣🤘🏻

Will this void your new car warranty?? 🤔

@RoundTheFire

3 жыл бұрын

I personally haven’t had any problems with get things fixed on warranty so far? I’ve even removed the standard Airbox completely and replaced the entire unit with an aftermarket customAirbox and pod filter, still no issues with getting stuff fixed on warranty? It’s best to talk to your dealer first where you get your vehicle serviced as they are the ones who initially decide if a repair is covered by warranty. Most of them are happy to have a chat, if they aren’t find a better branch.

Love your work but I don’t agree with you on this one...the only people pushing catch cans are the people selling them.

@RoundTheFire

5 жыл бұрын

I found the exact same thing when trying to research the pros/cons of a catch can. Very hard to find a genuine line about catch cans without a hook attached. I don’t get any benefits out of making this video other than the google throwing a few bucks my way for the adds they run before my video starts. 👍🏻😎🇦🇺🍺

@shakengandulf

2 жыл бұрын

I know this is a 2yo comment.. But i guess im at the same point. Looking at getting a Raptor, maybe a 2022.. and this catch can stuff seems to swing both ways.. its also doing my head in 🤣 I see plenty saying no, dont get them.. And well, plenty saying its a necessity. Raptor might be my first diesel so trying to do my research and being a new car, i want important things on day1. Also.. Great video.