It was awesome to get to meet the doc. Wish I could of met you and the tractor chick too lol

Far superior design and engineering compared to the hit and miss tractors offered until 1960. Thanks for saving it.

That’s a nice Case L, I am glad you are keeping it. Thanks for a great year of videos. Happy New Year! 🇺🇸🚜👍🎁🎄⛄️🎉

Don't let your VAC go Dave unless the offer is so far over market that you're left with no choice but to take the offer.

the case VAC,S are more common than the LS and LAS they are small tractors that was used 4 garden tractors that L is in 2 good of shape 2 pull a part 4 a parts tractor I would fix it the 1ST thing is take a back pack leave blower and get what trash and dirt U can 2 next start the power washer up and clean after wards it will be alot better than what it was I would take the gas tank off and put some new gas in it and see what it looks like after wards and U can take the power washer and wash it out also U have 2 some cleaning and a bit of work 2 get them running most of the standard tractors were used 4 plowing years ago and 4 flat belt work 😊😊 OMG 8 28 2O23

A good pressure washing will blow most of the crud off the engine. Clean points in mag and clean carb. Check compression dry and with oil. Fix a temporary gas tank so the carb doesn't pull crud from tank.belt it to a tractor to spin engine. Get engine to run then clean rad, gas tank and look for tires.Al B in Ohio.

I would get it running before putting tires on it. You ever start them with the belt pully or pto? Looks easyer than the Avery that I am working on.

Excellent video Crazy D equipment :) also if want flush that fuel use 60 % hot water with 40% vinegar mix up and shake in tank also soak for 1 hour then drain it do 2 times can try and great shape in for sure! Be interesting if 6 volt positive ground or 12 volt negative type add on to !

I’m working on a ‘37 L this winter. 👍👌

Happy new year 🍾

Check out Steiners for piston and sleeves. They should have them

Happy New Year.

Great project!!

Looks like a good project tractor -- surprising how well the pulley turned when hand cranking so you know good stuff is on the inside of that tractor. I've seen a lot of Gleaner combine wheels put on the AC WDs so if you think you can fit WD tires on this Case you may have a wider inventory to work from.

@copperhead6132

2 жыл бұрын

That would explain why on marketplace some WD's have really wide wheels and other have normal sized.

hi have you guys never heard of pressure wash or steam clean before you start work?

Where did you get it from? It looks exactly like my late grandpa's old 1936 Model L Case tractor from Kansas.

Why are you so eager to buy kits for the carburetor and exhaust? Why don't you disassemble first and evaluate. You might be able to clean these parts enough to use as is for trouble shooting then purchase the kits once you have a better idea of what you are up against.

@carmudgeon7478

2 жыл бұрын

For a tractor sitting 30+ years a carb kit and cleaning the intake are as mandatory as a gas tank cleaning.

You went all the way to Lakin to get an La? That's the only KS town I've heard of on Mt. Time. Thanks for the video.