Great Video for the guys who have never had any experience with them, I've done a few too many.

What a good job producing this video!!! I appreciate you.

Nice concise video. I've replaced all seals on my yellow fendered 580k except for the swing and loader curl cylinders. The dipper cylinder was extremely tough to take the gland off even with torches. A 10' (yes 10 ft) pipe broke the 1" breaker bar trying to get the piston cap screw loosed. Ended up taking it to a hydraulic shop that had a hydraulic press. They ended up heating it so hot that I couldn't touch it for almost 2 hours. I was happy to pay the $50 they charged just for unscrewing the piston!

@dobimike3745

9 ай бұрын

So its not just me its the dipper. I went to hell and back with that mo fo. I went through two jacks , a cable, the back window of my 7.3 (1500 lbs in the bed) and 3 of the spread wrenches. Bent third one in half. I tried heat and failed. I gave up and let it set for few months. I learned that more heat might do it. We took two torches to it. I welded a heavy chunk of L bar to the gland so we could grab it We brought it to a bright orange. Right on the edge of blowing holes in it. And it turned. we had to keep it that way till we freed it. Shot threads had two replace

Great job explaining this process. I work for Hercules Sealing Products. I actually machine any custom seals customers order. I be seen every kind of seal imagined but it’s great to see the application of the seals💪

@JacobsFarmLife

2 жыл бұрын

Thanks man

You have the cleanest mechanic hands ever. Thanks for the video, gonna go tackle this now

Thanks for the video

Appreciate the vid man! Just bought a backhoe and need to do this to one of my swing cylinders. Very helpful and very well made video too!

@JacobsFarmLife

3 жыл бұрын

Hey thanks a lot. Hope it helps ya

Excellent vid - thx for taking the time to make! I've got a mid to late 80's JCB. Giant nut on the cylinder instead of the Case approach with the holes. Haven't ever been able to break those nuys loose. Even with a large pipe wrench and an extended handle for leverage !!

@JacobsFarmLife

2 жыл бұрын

Hey thanks. I’ve had to go the pipe wrench route before lol. Might need a little heat on that one.

Job well done!👍👍🚜

@JacobsFarmLife

3 жыл бұрын

Thank you sir

Great job, thanks for posting. 👍🏻🇨🇦

@JacobsFarmLife

3 жыл бұрын

Thanks for watching

Nice video. I have a 580K that the bucket cylinder is leaking. I appreciate how thorough you are and the commentary. I'm pretty sure I can tackle now after watching this. Thanks!

@JacobsFarmLife

3 жыл бұрын

Hey thanks. I’m actually replacing the seals on the bucket cylinder tomorrow on my 580k. Going to make a video on some tips for removing the gland nut. Thanks for watching.

@hobel73

3 жыл бұрын

@@JacobsFarmLife awesome, looking forward to the video. I’m trying to figure out how big of an impact socket I need to get for the piston bolt before I tear it down. A source and a part number for your kit would also be helpful.

@JacobsFarmLife

3 жыл бұрын

I’ll let you know.

@richochett404

2 жыл бұрын

@@hobel73 ITHINK HE SAID 1 1/8 '' ON THAT ON THE SWING CYLINDER.

@damiencespedes1609

10 ай бұрын

10:40 10:42

Good work, just after the book... 💪💪💪

Very good illustration

@JacobsFarmLife

Жыл бұрын

Thanks

Great video

2 things you used a hammer and chisel to loosen the cylinder head which can be clearly seen in the close up shots and the second thing always wear gloves when working with hydraulic oil.

thank, you for you're video

Thank you sir!

@JacobsFarmLife

7 ай бұрын

My pleasure

Well done Yung man , nothing ventured, nothing gained.

thank you very much

@JacobsFarmLife

2 жыл бұрын

thank you

I, bought a 1966, case Ck 530 Backhoe 180 Diesel will be helpful on the farm

@JacobsFarmLife

Жыл бұрын

They are very useful on the farm

Thanks, one of mine is leaking on my 530 CK. I need to attempt rebuild soon so hopefully this helps. Thanks!

@JacobsFarmLife

2 жыл бұрын

No problem. Let me know how it goes.

Was using our 580 Super M yesterday, and damned if the exact same one didn't blow a seal! Puked all my new fluid out before I noticed it to.

@JacobsFarmLife

Жыл бұрын

That sucks when that happens

Nice man 🙏🏼

@JacobsFarmLife

3 жыл бұрын

Thanks

@saintflores9913

3 жыл бұрын

@@JacobsFarmLife i hope next videos, u can explain how to overhaul diesel engine backhoe loader man, 🙏🏼🙏🏼

Thank U

Damm good job.

@JacobsFarmLife

3 жыл бұрын

Thanks

great video . i just purchased one and i was questioning if i can take the nutt off and then use the back hydraulic hose to push the piston . turn the engine and move the lever and push it out faster and ease

Really nice job repairing that cylinder, man. Impressive knowledge of hydraulic seals too! Seems like you’ve done this many times…

@JacobsFarmLife

2 жыл бұрын

Hey thanks..

That’s a cute hammer

@JacobsFarmLife

3 жыл бұрын

There’s the right sized hammer for every job.

I guess that I'll be doing this some day to my Backhoe or call the case service trk out to do the job eather way

Excellent job thanks for sharing your knowledge and experience Jacob What is called the tool you order from Amazon

I had a buffering ring on mine when I tore it apart underneath the wiper seal. I know it was in a spot that it shouldn't off been in. I couldn't find a spot for the buffer ring to go when I rebuilt with a new seal kit

Can you post the part number for the seal

Thanks for the vid. I noticed that the old vs. new piston seals were different. The old had two in two grooves. The new you put one over the other in 1 of the grooves. Was that last new one you put over the other new one a wear ring and should have went into that other groove instead?

👍👍👍

I and a friend just rebuilt hoses and rebuilt one cylinder on our Case 580K, have one outrigger seal leaking so have to take it apart and replace seals. We ran extend-boom out and in and other cylinders. Does this backhoe have self-bleeding set up? So, just run each cylinder out and hold for awhile. Let air run back into fluid holding tank? Do you need to bleed at each cylinder hose fitting and or push bleed valve on cap at hydraulics holding tank at set intervals to release air. Or does just running booms out and in release air to its desired level. Thanks, enjoyed your video’s.

Just watch video THANK U

Nice video thank you very much, can you put partnumber for the kit? I have the same problem. Thank you

@JacobsFarmLife

3 жыл бұрын

Yes the part number for the seal kit is G110053 which is for the 3 1/4 inch Tube ID but if yours has the 3 1/2 inch Tube ID it will be G110621. Hope that helps

I had to rebuild a ram also on a skidsteer tho but I always thought there's more to them than that but apparently not suprisingly easy to rebuild when you put the wiper seal in correctly I'm guilty

@JacobsFarmLife

3 жыл бұрын

I agree. Really not that back. Especially after you do a few of them. Getting the gland to break loose on 30 + year old equipment is probably the hardest part.

Thank you for your detailed video, comes in handy. If both cylinders need new seals can both cylinders be taken off at the same time or is it wise to do one at a time?

@JacobsFarmLife

3 жыл бұрын

You should be fine doing both at the same time.

Anyone have a clue how the extenda hoe line is rute to the bottom of the boom the retraction (lower of the 2 ) someone removed it and now Im not sure how its routed I think there is even a skid plate?

👍

@PantaiTimur-dh9ik

3 жыл бұрын

🇲🇾🤝

Hi upload more videos my friend

@richochett404

3 жыл бұрын

.

I bought a 1966 ck 530 case 180 Diesel Backhoe I have a 6 month service plan we're case service comes out to the farm and service the Backhoe every 6 months to keep every thang working that way I can be doing other jobs

@JacobsFarmLife

Жыл бұрын

That’s nice

Fantastic video. I had to repack the same cylinder on the same machine and this was very helpful. Have you had any experience with the hydraulic pump or the relief valve? I believe I have an issue with one or the other. I know the location of the pump, but I don't know the location of the main relief valve. Can you point me in the right direction? It's very difficult to find information on this specific machine. Any help would be much appreciated.

@JacobsFarmLife

Жыл бұрын

Thanks. I have no experience with the pump or valve. But I’ll probably be replacing both on my machine in the future

Great video, thanks for sharing. I have the same backhoe! Do you how long should this job take a professional Case Mechanic? Just an estimate, as I was quoted 40+ hours of labor.....?? Thank you, Doug

@JacobsFarmLife

2 жыл бұрын

Yea I would go somewhere else lol. Took me about 5 hours while filming it. So someone that does it for a living should have it done in 2 or less I would say.

Could you turn the arm to the right when it was leaking? I have a small leak and It doesn't work. Do you think I should do that what you did in your video?

@JacobsFarmLife

6 ай бұрын

Mine still worked when it was leaking.

How do you assure there is no pressure left in the lines before repairing?

@JacobsFarmLife

2 жыл бұрын

With the machine off. Just hit the pedals a couple of times and it will relieve any pressure if there is any

Stabilize for 2008 rv

Might be a dumb question but do you have to bleed the air out of the cylinder after reinstalling or will the fluid push the air out, thanks

@JacobsFarmLife

2 жыл бұрын

The fluid will push the air out. Just cycle it a few times.

@oldparentalunits

Жыл бұрын

I just asked that question too, before I saw your question. Was wondering if all that air after rebuilding system would damage seals. Guess not. God bless

I have an older 580 k the swing cylinder just blew the seals out can this cylinder be pulled out so I can take it to be rebuilt

@JacobsFarmLife

3 жыл бұрын

Yes you can simply unbolt both ends and remove both hydraulic lines and it comes right out.

@jessenoble1399

3 жыл бұрын

@@JacobsFarmLife thank you for the fast reply I will do that

@JacobsFarmLife

3 жыл бұрын

Awesome. Let me know how it goes

@jessenoble1399

3 жыл бұрын

@@JacobsFarmLife thanks so much I sure will

@jessenoble1399

3 жыл бұрын

Well my Dad just informed me it's not a k model it's a b model will that make a difference getting the cylinders out, it has a plate across the top of the cylinders with grease fittings on top on each cylinder

where did you buy your parts? online or local?

@JacobsFarmLife

3 жыл бұрын

Bought them at a local case equipment dealer. They have since went out of business. I’ve got a couple more cylinders I need to rebuild so I’ll have to be looking for a new place to order from.

@caverbrad

3 жыл бұрын

I also have a 580K and have been getting my seals from Hercules Sealing Products. they have a drop down menu to select by brand and model. I also bought a seal twister from them which makes installing that first seal he put in real easy. This video is appreciated as my swing cylinders are starting to drip when parked. The machine is over 100 miles away at my property so gives me an idea what to expect. First two cylinders (boom& dipper) that leaked I paid a guy to rebuild and glad I did. He had a lot of difficulty getting the piston bolt off. I rebuilt one of the bucket curl cylinders myself and was easier than I expected.

@hobel73

3 жыл бұрын

@@JacobsFarmLife After I watched your video I had to repack one of my stabilizer cylinders on my 580k. I ordered from brokentractor.com. They sell Bulldog seals, at least that’s what it was for that part. Fair prices I would say. The cylinder has held the stab up for at least two weeks between uses, so no complaints.

@JacobsFarmLife

3 жыл бұрын

Awesome. Thanks for the info. I’ll check them out

😲👏🍻👍🇺🇸

Looking at several "OLD" but unfortunately not cheap back hoes. I am sure this repair will have to be made some time soon. Just waiting for weather to clear up some. A northeaster coming this weekend & all my work is done outside. Full view & 👍 558 Well it will be new material for my channel. Stay safe, Joe Z

@JacobsFarmLife

2 жыл бұрын

Good deal.. Thanks for watching

@JOEZEP54

2 жыл бұрын

@@JacobsFarmLife you're welcome.

Case cummis 4bt

If you didn't remove the actual cylinder you just loosened it and pulled it apart why did you disconnect the hoses

@JacobsFarmLife

2 жыл бұрын

Makes it easier to pull and install the shaft and piston.

@johnmaxx4818

2 жыл бұрын

@@JacobsFarmLife makes. Sense

@BuildItFixItDIY

Жыл бұрын

@@JacobsFarmLife "Makes it easier". ..I would say "makes it possible to", probably, no? Because @John maxx, if you don't remove at least the one line that feeds the space behind the piston, you wouldn't be able to pull the rod out, unless your piston seals are trashed too, because as you try to remove the rod, there will be a vacuum there.