New Era hats are extremely inconsistent as far as sizing.

@ricokingva

5 жыл бұрын

Johnson Cunninghamcus - EXTREMELY

@josephbriggs7067

5 жыл бұрын

It’s been like that for some time now, new era needs to step it up

@lac2500

4 жыл бұрын

Johnson Cunninghamcus they are even worse now with their rotation of countries of production. Hats made in Bangladesh are so awful that it prompted me to boycott NewEra altogether

@kelailie

4 жыл бұрын

Ikr I totally agree

@maxm.5455

4 жыл бұрын

I ordered a 7 1/2 because I have one in the same size and it perfectly fits but the cap I ordered was like a 8 or even more.

Thank you thank you thank you. I've been waiting for videos like this. I appreciate it a lot.

@dreinthe616

6 жыл бұрын

You are welcome, I'm glad they help. Thanks for the comment, and good luck with your caps!

And yes, variation in sizes can be quite frustrating when buying online

@captainscentsible1811

3 жыл бұрын

Im on my 4th hat off ebay.fkn cant get my size right.i started way to big.its my fault. And going down a size isnt much when it was so huge.but i knew nothing about fitted hats. But spending 100$ for a hat sucks

@js-zo7ze

3 жыл бұрын

Mike Broskywhodatedhoski measure your head

@genericwhitemale1114

3 жыл бұрын

@@captainscentsible1811 go to the store and try on hats. Make sure it's the same brand though. With Addidas, all of their hats seem to fit differently now. I have tons of addidas hats yet this new one I just got in the mail today is way too big despite being the same size and style as the other 3.

@captainscentsible1811

3 жыл бұрын

@@genericwhitemale1114 i got a 7 1/2 and i lined the sweat band with dr scholls pads.it kinda worked.

@genericwhitemale1114

3 жыл бұрын

@@captainscentsible1811 is it worth doing? I might try it if you recommend it.

Cool, thanks man!

Thanx Doug!!! Appreciate your guidance & advice.....I just purchased two New Era caps at my regular size but they were both slightly bigger than what I was expecting. I'll definitely use your tips to help my situation. Thanx again....

@dreinthe616

5 жыл бұрын

You are welcome - and if it doesn’t get you far enough I have another video on my channel to take up a loose fit. Good luck and thanks!

Let’s say you did the steam or hair dryer method to mold the cap. How do you get I back to normal because I don’t have a hat jack.

Thanks a lot

Hey I was wondering where did you buy those hats they look amazingly perfect exactly what I look for

@dreinthe616

3 жыл бұрын

I buy from lots of places, a lot of caps from Lids, Hat Club, and New Era directly... but the main thing is that I am pretty committed to maintaining them all - cleaning and storing them properly. I've posted lots of videos on editing and caring for fitted caps, so you can find those at my channel if you are interested.

Could you do a video showing the difference between low crown version (on field, right?) and the regular one please?

@dreinthe616

6 жыл бұрын

Yes, that is on my list to do soon, thanks for watching. I do have a short review of a low profile 59Fifty posted at kzread.info/dash/bejne/i4ugtNZyhJfHqdo.html if you wanted to check it out in the meantime.

Hi, I love your videos. They're very informative and well done. Could you do a video on how you clean your caps?

@dreinthe616

6 жыл бұрын

Thanks for the comment! Sure, I had another request for that recently, so I will put it on my list and try to get something out soon.

@dreinthe616

6 жыл бұрын

Hello again, I just posted a new video on what I do for routine cleaning... see kzread.info/dash/bejne/gIx4kpiomqW1ds4.html

@TatyanaHallMusic

6 жыл бұрын

dre in the 616 thanks so much! I'll check it out

Thanks Doug, I'ma try it!👍

I’m trying to go 8 to 7 /8 u think this will work ?

Does this work

so does this work?

Has anyone had the problem with there cap the elastic at the front behind the beak starts to gather and not stay smooth?? If so how can it be fixed

Great informative video! I used your method of shaping new hats and they really worked! Just a quick question, do you know how to shape snapback 9fifties? Or use the same method?

@dreinthe616

6 жыл бұрын

Thank you for the comment! I have never tried to shape a snapback, but curving the bill and shaping the front two panels will work exactly the same, of course. As for the hat jack and stretching, you should be able to influence the shape of the cap with steam and the hat jack in place, but probably can't overload the snapback with too much stretch... I would just go slowly if you try that.

@mnmz6934

6 жыл бұрын

Thanks for the reply!

@BatIord

4 жыл бұрын

@@dreinthe616 as

Thx g 👌

what to do when the fitted too tall fron the front crown

I've had anything from a 7 5/8 - 8 fit me. I got a 7 3/4 recently and they're so big I can tuck my ears under, and of course it's not returnable because I got custom stitching on it

Another excellent vid, Doug! This is exactly the type of walk-through I was seeking after purchasing a Retro Classic in my size recently that was just ever so slightly loose. Excellent instructional videos - thank you so much for sharing your wisdom on all things New Era!

@dreinthe616

6 жыл бұрын

Thanks for the comments, hope this helps with the fit you are looking for!

I just received my delivery of my new New Era 59Fifty size 7 3/8 & it's 100% polyester style cap and it was a little big at first but I think playing around & curving the bill the hat has fit a little better but probably still a little to big

Just got a new Indians cap with the original logo. Its a little too big but since their retiring the original mascot I want to keep it in the best shape as possible . Hope this will help with the fit.

Thanks for all your vids, is there a way to take off or at least hide a little bit the marks of shrinking on the Cardinals one? I did the process with a whool cap and now my hat has those marks on the back panels (not as exaggerated like the Cardinals but you can noticed), I think I did something wrong

@dreinthe616

2 жыл бұрын

It's tough to restore that look without stretching the fibers all over again... if you decide to do that, what I typically do is try to stuff a towel or t-shirt inside that area and re-steam it to smooth it out under pressure and steam. Keep it on the "form" until it dries out.

Hey Doug, Greetings from Oz, I feel like I know you already after watching all of your videos, some 2 or 3 times. Question for you, and I think I know what your answer will be but I'll ask it anyway. Have you ever tried to shrink a cap using an oven? There are many videos of people claiming great results doing this but I just wondered what your take on it was? Also, can you recommend any websites that have a good range of caps, MLB 59fifty fitted in particular, which actually ship to Australia ? Any advise would be greatly appreciated. Your passion for fitted NewEra caps is infectious, I have recently bought 9 caps and a Hat jack following watching your videos...

@dreinthe616

5 жыл бұрын

Hey, greetings to you as well David - thanks for all the praise! Unfortunately, I don't have any suggestions as far as vendors that ship caps to your part of the world. I was actually going to do a video sometime soon with a comparison of online vendors, but all are USA-based to my knowledge. Sorry I can't help on that one, but I'm glad you're getting value out of a lot of my other vids! And as far as shrinking with an oven - the point is using heat to shrink, so I suppose that could be a source as well... but I have never done it, and would only worry about what is called a 'transition temperature' for the plastic elements in the cap (i.e. fibers in the buckram).

@biggdogfresh2263

3 жыл бұрын

@@dreinthe616 hey there i bought a 7 1/4 lowprofile hat. Used hat jack but it keep going back to size it wouldn't stay

@MortuaryManor

3 жыл бұрын

@@biggdogfresh2263 use hat jack combined with a steamer.

Thanks btw

hey man great vid! i recently bought a 7 3/4 (59 fifty) and it’s a little bit big just a little i was looking for solution to reduce it to 7 5/8 would it work???? it’s also 100% polyester would it damage it?

@dreinthe616

3 жыл бұрын

Poly is not as easy to shrink as wool, but do what I show in this video and you can get a lot closer - just make sure you wet the inside of the back four panels, and the sweatband too - then blow dry with heat. You can also do what I show here - kzread.info/dash/bejne/q3tt1MV-Z7jbhqw.html - good luck.

Thanks man, I'll take a look at this. I will also sometimes just throw on a bandana underneath the hat

@dreinthe616

3 жыл бұрын

Cool, filling space is the other way to shrink, I just posted a combination video a couple of weeks ago icyi - kzread.info/dash/bejne/lphnsc6Ej9rFgdo.html - thanks!

7 1/4 and 7 3/8’s is always suspect.

@williamgallagher9608

3 жыл бұрын

For sure dude

@yourifranck3682

3 жыл бұрын

Even the fucking 6 7/8

@joeymoro5

3 жыл бұрын

That’s why I’m here 😂

@104dior

3 жыл бұрын

literally why im here rn

@josephyoung1433

3 жыл бұрын

My life definitely

Dre have you experienced any shrinkage on the crown/the height of the hat?

@dreinthe616

5 жыл бұрын

Yes, a little bit - part of this video was to show how to shrink those four panels in back, and it may happen naturally with heat and sweat. The buckram under the front two panels pretty much makes it impossible to shrink, you can only shape those with heat. Thanks.

Should I buy a 7 3/8s if I’m a 7 1/8? This hat I wanna buy is just not in my size

Hey Dre, thanks for your informative channel. I have a slightly loose Ebbets Field 6-panel wool hat with a soft visor. Would this shrinking method possibly work for this kind of hat? As all six of the panels are soft with no firm backing, can I wet all of them for more even results? Do you think the stitched-on felt emblem on the front be affected? Also I too would be interested in seeing your comparative results using a clothes steamer if you ever end up testing that method.

@dreinthe616

Жыл бұрын

Yes, and the wool is going to shrink more than a polyester cap, especially with that Ebbets wool. This technique should be effective, and I don't think the applique logo will be affected. Thanks for the comments!

What about diamond era hats ?how a hard is it for those to shrink

@dreinthe616

6 жыл бұрын

I've never tried shrinking the Diamond Era material, but I have had to stretch those back to shape every few months. Which means they probably have drawn in a little bit on their own, and they will probably respond in the same general way to the moisture and heat in this video. If you try it, good luck, and thanks for watching.

Where did you get the Cardinals hat at the beginning of the video?

@dreinthe616

5 жыл бұрын

Online from Lids... it was part of the standard "Black & White" collection, an alternate cap for the Cards - not sure if it's around anymore, though.

How do I make that top part of the cap shrink?? Mine fits okay but my head looks to big

@dreinthe616

3 жыл бұрын

You can soften the shape of the crown by finding a couple of my other videos (go to my channel videos tab or look in my playlist "Baseball Cap Tutorials")... but if it's the overall volume you're trying to reduce, you might be more interested in a Low Profile 59Fifty. Thanks for the question.

Hey Doug, will the heat from the hair dryer damage hats that are made of polyester and mesh? Ex. the 2020 mob spring training hats.

@dreinthe616

3 жыл бұрын

No, with one of those ST caps, you should be fine - just don't hold it on in one area for too long, keep it moving to heat and dry the cap.

Hey this worked pretty good. It did leave a small divet on 2 of the rear 4 panels. What would be a good way to push them back out ? Love your videos keep up the good work

@dreinthe616

6 жыл бұрын

I'm not sure exactly what the divot might be, but you can always hit it with a little steam to manipulate the fabric if that's where the problem is. If you've not seen it yet, watch my video on smoothing wrinkles using steam (kzread.info/dash/bejne/fXmkmquppbS8lps.html). Thanks for the support!

How do you get that fold

@jrram1169

3 жыл бұрын

You just bend the brim a little bit

dude can you please tell me where you got that Houston hat

@dreinthe616

3 жыл бұрын

It was an MLB "Graphite on Black" collection, probably from 2016/17 - I bought it in 2017 from Lids.com.

I literally did this before looking for any video

How many hats do you own? Love the vids!

@dreinthe616

6 жыл бұрын

Thanks for the comment! Counting all caps, probably around 25 - so a small but growing collection...

I hope this works. Ive been a 7 1/4 for the last 10 years. I bought a 1906 White Sox hat, very rare to find with the correct size and it's wayyyy too tight. I thought it was strange. I bought the next size up and sent back the old one and it was a centimetre too loose the wind could knock it off with the right amount of gust. Since there's no intermediate size i'm going to try this and see if it works!

@dreinthe616

5 жыл бұрын

If this one doesn't work for you, I posted another video where you can take some of the extra space out of a too-large cap... check it out at kzread.info/dash/bejne/q3tt1MV-Z7jbhqw.html - and good luck!

Doug just bought 7 1/4 bc they didn't have my size 7 1/8. New era 59 fifty yellow Yankee hat. Also has a side patch. Wondering if that will be a problem? Will the hat be discolored if I spray with water and blow dry it. Hat is 100 percent polyester. Thanks for sharing this technique.

@dreinthe616

3 жыл бұрын

Ordinary tap water should be fine, should not cause discoloration. And remember this is a very subtle way to shrink, it really just accelerates the action of heat/moisture on the cap material. If you find this doesn't get you there, you can always rely on the other method I talk about here: kzread.info/dash/bejne/q3tt1MV-Z7jbhqw.html - this is a more standard way of sizing any kind of hat. Thanks.

By far the safest method, thank you so much. I have a question: i bought a new 59fify, it's a 7 1/4 cap and it fits well on the forehead, but the problem is that the crown and the up part of the cap is to high and looks very goofy... Does this method will shrink the entire cap if it's made of wool? My ears bend down when i wear it hahah

@dreinthe616

6 жыл бұрын

No, for a peak in the crown you will probably have to shape the front two panels that have the buckram bonded to the inside - this technique is not great for that. The buckram can be shaped by applying heat (hair dryer) and then holding pressure on where you want to shape it while it cools down. For a couple of examples check out my tutorial on shaping - kzread.info/dash/bejne/aoJhp65motDNecY.html - and locally modifying buckram under the logo - kzread.info/dash/bejne/opuCp7icpN3QpbA.html I'd suggest using your palm to flatten the peak after heating. Good luck!

@boricua6483

3 жыл бұрын

Same shit with my cap. Shit looks like the Mario bros hat

@santisn3095

2 жыл бұрын

@@boricua6483 🤣🤣🤣🤣🤣🤣💀

Hello Doug, may I ask if you have an advice or solution for an overstretched elastic band of 39thrirty caps? Mine went too stretched and it wont fit securely again. Please reply and Thanks in advance

@dreinthe616

5 жыл бұрын

Unfrotunately I don't - if it's broken or it's 'dry-rotted' from age, I don't have a good way to restore the tension. Sorry, but thanks for watching.

@yrejsalaver334

5 жыл бұрын

@@dreinthe616 Ok, thanks anyways 💪

My brother recently gave me a few diamond era hats and they’re 7 1/8 but I wear a 7. Would this process work with the diamond era material?? Thanks in advance

@dreinthe616

5 жыл бұрын

Works best with wool of course, but I'll admit I have not tried the Diamond Era. You may also want to try an insert material to take up the slack, my other video at kzread.info/dash/bejne/q3tt1MV-Z7jbhqw.html might be a good way to go, thanks.

I feel like I didn’t bend my grey brim right on my wool 59fifty. Do you happen to have any methods to fix that too?

@dreinthe616

5 жыл бұрын

I’ve gotten a couple of requests for some brim/visor techniques, so I will add those to my list. In the meantime you could hit it with an iron (with fabric covering the visor) to re-flatten, then bend again.

hey, so i have a 7 5/8 and I'm a 7 1/2. that hat is polyester and I was wondering if you had any shrinking tips

@dreinthe616

2 жыл бұрын

A combination of two steps is shown here - kzread.info/dash/bejne/lphnsc6Ej9rFgdo.html - a newer video, thanks.

i b recently bought a 59fifty low profile and all my regualr hats are a 7 1/4 but the low profile fit so small i had to return and get 3/8. it was a collaboration hat so im wondering if you think thats why or do all low profile hats fit a size small. i wanna buy more because i love the fit but nervous to have to repeat this process again of exchanging. love your videos man!!!

@dreinthe616

4 жыл бұрын

I have been ok with the same size in low profile, but if I buy more of them I will probably go up 1/8 size, because it gives just a little more volume over the forehead. So I'd say stick with the extra size up if that worked out for you - but remember that all New Era caps are inconsistent in sizing. Thanks for the comment and question!

@YoChrisWTF.

4 жыл бұрын

dre in the 616 ok thanks that’s what I’ll do. Take care 🙏

I thought you had to mess with the sweat band to shrink it. Now I know. My wife gave me a fitted but it was a bit to big. Once I get home I'm gonna give this method a try. Thank you!

@dreinthe616

3 жыл бұрын

You are welcome - and I posted a more recent vid that combines this with another technique as well... kzread.info/dash/bejne/lphnsc6Ej9rFgdo.html - in case you need to shrink a bit more. Does not hurt to wet the sweatband, I'd spray that along with the inside of the cap too, thanks!

Just stumbled across your channel. I have a low profile 59fifty spring training cap with all the logos, in the new material. It is slightly bigger I wear a 7 1/4 but had to buy a 7 3/8. They sold out of my size but....well....... I had to have the hat. I have put in a tissue insert but might try this.

@dreinthe616

6 жыл бұрын

I'm not sure how the Prolight material responds, but this technique usually only gets a small amount of shrink... it might not be enough to get you a quarter size, but I'd say try it a couple of times and see how it goes. Good luck and thanks for the comment!

@TheTonyMartinExperience

6 жыл бұрын

I have scar tissue on the front of my head, just under the hairline. The new type of logo is what is causing the problem. The rubber logo has pushed in that part of the hat (cubs). Thanks for the reply and I think I may have a solution.

@dreinthe616

6 жыл бұрын

I had the same problem with another cap, and finally posted a video of what I also did to solve the problem. You can now check it out at kzread.info/dash/bejne/opuCp7icpN3QpbA.html Although I wonder if high heat from a hair dryer will cause any trouble with the Prolight 'beveled rubber' logo.

Will this method damage any sidepatches? For example the recent world series patches

@dreinthe616

4 жыл бұрын

Not if they are stitched on, like 95% of them are... the patches themselves will hold those areas pretty stable, even if the material around them tightens up a little bit. Thanks.

Paper towels under the ban works as well

So for 7 1/2 down to 7 3/8 this should be perfect ?

@dreinthe616

5 жыл бұрын

You might not get a full size of shrink, but if this technique does not get you there, you can always try this alternative from another of my videos: kzread.info/dash/bejne/q3tt1MV-Z7jbhqw.html Thanks

@Dthegrower

3 жыл бұрын

I’m in the exact same position😭 did it work? “1 year later”

Just got a new era hat and its to big all around will this work?

@dreinthe616

3 жыл бұрын

Depends on how big it is... this can only get you about 1/8 of a size in shrinking. If this doesn't get it all the way to where you need it, you can also take up space in the cap as I show in this other video - kzread.info/dash/bejne/q3tt1MV-Z7jbhqw.html Whatever you try, good luck, thanks.

Where can I get one of your caps? The dre 616?

@dreinthe616

4 жыл бұрын

Hey Joe, thanks for the question - I'm actually working on having some of these available sometime in the first half of this year... right now that cap is one-of-a-kind. I'll let you know when I get those done!

Thanks. But why so many different teams?

@dreinthe616

5 жыл бұрын

Ah, probably because I'm more a fan of cap and logo design than any one or two teams.

@jsmooth3239

5 жыл бұрын

dre in the 616 Artistic insight!

@ihopeurokay5120

4 жыл бұрын

Because hats are bomb, I hate baseball or football or any sport ahah still use them though

Could one substitute steaming for misting?

@dreinthe616

5 жыл бұрын

Good thought, and yes, probably so. I'd still hit it with the dry heat of the hair dryer afterward, since that's what will draw in or tighten up the fabric. Feel free to post a comment back if you try it, thanks!

Hey, Doug I know it’s been forever but I have a question. Can I wet the inside of the cap and dry it from in there as well?? I have a hat that has stitching all around it and I don’t want to damage it

@dreinthe616

3 жыл бұрын

Yes, that's actually important to do also - wet the sweatband and the inside of the back four panels. Thanks.

@ReadDaBible

3 жыл бұрын

Thanks for the fast reply, Doug. God bless

Is it possible to shrink a poliester 7 1/4 to a 7 1/8 if so how many time would I do the method ?

@dreinthe616

5 жыл бұрын

For that I'd try it 2-3 times. Make sure you get the outside and inside of the cap wet (including the sweatband, but keep the visor dry). If that doesn't work, I have another video to help - check out kzread.info/dash/bejne/q3tt1MV-Z7jbhqw.html for another way to fix the size, thanks.

Hey Doug, I found a Yankees old 4th of July hat on eBay that I want to get, but it's way too big for my head (size 7 5/8 and I'm a 7 1/4). Is there anything I can do to shrink this that much if I'm gonna buy this hat? I know that the techniques in this video will shrink it some but I don't think that much...any ideas?

@dreinthe616

6 жыл бұрын

Hey Sam, unfortunately that is way too much to shrink a cap, since it is 1/2 inch in size. The technique shown is really only useful for 1/8 size or less to tighten things up a bit. I think the hat would end up really messed up if you tried anything else. Sorry I don’t have a better answer, thanks for watching

i can't stand NE caps. I have one which is 6 7/8 like all of my NE caps but for some reason, the front two panels of the crown are HUGE and won't shrink. The back has shrunk to the proper size. It's horrible

Can I get 7 3/4 to shrink close to my size that’s a 7 3/8

@dreinthe616

2 жыл бұрын

No, way too far to go.

For someone that doesn’t have a hair dryer, can this be done by tumbling it in the dryer for a bit?

@dreinthe616

2 жыл бұрын

Usually don’t recommend it, since it beats up the structured crown as its tumbling.

I have a question, normally I'm a 7 1/8 in 59Fifty caps Would I have better luck stretching a size 7 or shrinking a 7 3/8?

@dreinthe616

5 жыл бұрын

Stretching is almost always easier than shrinking, esp. if you use a hat jack. Btw, your next size up is actually a 7-1/4, not a 7-3/8 - so stretching a 7 is a better choice. I've got one video on stretching and two on shrinking techniques - go check them out if you have not already - thanks.

Will this technique work on the mid 90’s 5950’s with the plastic liner inside the sweat band?

@dreinthe616

3 жыл бұрын

That will make it tougher to do, no doubt. Usually I'd recommend spraying/wetting the sweatband too, but since that plastic liner is also stitched in, it's going to restrict movement. I think you'd be better off taking up the extra room with some sort of foam insert that I showed in my video on the other way to shrink, thanks.

@markforever1

3 жыл бұрын

@@dreinthe616 thanks Doug, I just watched that video and was going to give that a try as well.

@markforever1

3 жыл бұрын

@@dreinthe616 Both methods worked great. Unfortunately a little of the sprayed water go absorbed on the brim of the cap (my fault) and has left a water mark. Any suggestions on how to remove this? Thanks!

Is there a way to remove those puckering along the panels? I shrinked my cap too much.

@dreinthe616

2 жыл бұрын

It's kind of tough, but you can try a bit of a restoration with a bump cap insert (my video on these is here - kzread.info/dash/bejne/l22ktdunnJe1Z7A.html ) They are right around $10, and when used with heat/steam are a great tool for shaping, maintaining, and sometimes repairing caps, thanks.

Can I use a a steamer for faster results?

@dreinthe616

2 жыл бұрын

I've never run a side-by-side test between this technique and simple steaming. The application of dry heat from the hair dryer does contract the fibers, and I am not sure if the constant presence of moisture during steaming would affect that at all... but I'll give it a try in the name of science, thanks! Btw, I have published other vids on shrinking, using filler strips is another technique I recommend, see it here: kzread.info/dash/bejne/aK5ow9Z_iZazaag.html

Does this work with new era 59 fifty 100% polyester?

@dreinthe616

2 жыл бұрын

Yes - not quite as much as with wool, but you can draw in the material with water and heat. I've got a couple of other videos on shrinking, including taking up space with filler material - in case this subtle method does not get you far enough, thanks.

Is this applicable to half net baseball cap?

@dreinthe616

4 жыл бұрын

If you're talking about a mesh back, probably not... that material likely takes more heat to really shrink, but it could also get damaged soon after that point. That said, I've never tried it - but thanks for the question.

Great video. I do have a question. I purchased a "Salute to Service" 59fifty online, wasnt available locally, and when I received it, it has the fist panel on the right after the buckram, near the button, bulges up like it is either stretched out, or almost like that panel is too big for the rest of the hat. think a bubble on a pizza. I tried the steam technique to smooth the "bulgewithout much luck, If i focused the moister and heat from the hair dryer on that one spot, would it shrink it to not bulge? The crown does say it is 20% wool. Thanks

@dreinthe616

5 жыл бұрын

I think that might be your best bet - maybe saturate that 'bubble' fabric area with water from a rag or washcloth, then hit it with high heat from the hair dryer. Honestly that seems like the only way to draw in some of the stretch of the fabric - and the wool content should help, I'm just not sure how much. Good luck, and thanks for watching.

@cartmantke

5 жыл бұрын

@@dreinthe616 i took your advice and nave done about 3-4 sessions of soaking the area the using a blow dryer to dry it. it has shrunk the area a little, however the side of the bulge looks way lopsided. i'm starting to think this was a manufacturing error as it just appears that they used two panels that were a size or two bigger for that side of the hat, plus the American flag patch and the ribbon patch stitched in have just messed up the shape. long story short, should i try a "cap buddy" soak it and toss it in the dryer or iron those panels to get a shape that doesnt look stupid, or just wear it to do yard work? thanks again.

@dreinthe616

5 жыл бұрын

@@cartmantke Oh man, it sounds pretty bad... I think maybe my first piece of advice could have been to return it for another, if they still had your size. Yes, it sounds like a defect right out of the gate, and the vendor probably should not have shipped it. The dryer will shrink everything, so I'm not sure I could recommend it unless it's a last resort. Have you called the vendor? If it was Lids, I have been happy with their customer service - they usually try to make things right.

deos it ave to be with cold water or warm water?

@dreinthe616

3 жыл бұрын

Cold or room temp is fine, no need to use warm/hot water.

this should only bring it down about 1/8 of a size right? because i got a 7 1/2 and needed i believe a 7 3/8

@dreinthe616

3 жыл бұрын

Yes, correct - it will not bring it down any more than 1/8 of a size, thanks.

What is easier to do, shrink a cap or stretch the cap? I’m between 7 1/2 and 7 3/8. Thanks!

@dreinthe616

2 жыл бұрын

I've always thought it was easier to stretch. The sizes vary a lot, so sometimes this isn't always true - but if the cap is too big you can't do much to make it look smaller - so I stick with stretching as the easier step. Also covered this in my FAQ video recently - kzread.info/dash/bejne/oqqLxsqpepq4l5M.html - ICYI, thanks.

@OscarGonzalez-fc6ru

2 жыл бұрын

@@dreinthe616 thank you for the info!

Hello if you can please kindly answer. Would this method work on A new era SnapBack? For some reason all my SnapBacks fit good but I feel uneasy about a certain one I have. It fits ok but I want it to fit a bit more Snug like the rest that I own. Would the water spray and hairdryer method work?? I’d appreciate the response please

@dreinthe616

3 жыл бұрын

It will work a little bit, but it's not as effective without the full fabric panels and sweatband all the way around, thanks.

@alo93533

3 жыл бұрын

@@dreinthe616 I see what you’re saying. I’ll be trying the method. Hopefully it works enough to my liking. I appreciate the response as its been quite a few years since you posted this video. Appreciate you’re content too. Thank you

Does this only work for wool fitteds ?

@dreinthe616

3 жыл бұрын

No, you can still get some shrink from polyester and acrylic/wool blend fitteds - just not quite as much as the wool. Just make sure you're also wetting the sweatband and the inside panels of the cap, and dry it thoroughly. If that doesn't get where you need you can also try this from one of my other videos: kzread.info/dash/bejne/q3tt1MV-Z7jbhqw.html Thanks

Have you tried this with on field hats? Does it work?

@dreinthe616

6 жыл бұрын

Yes, I assume you mean the current polyester on-fields... it works, but you may have to repeat it a few more times than with wool caps. If I've stretched a cap (see kzread.info/dash/bejne/aoJhp65motDNecY.html ), usually I find that the poly caps return to shape over time, so they do shrink a little bit. Keep in mind this technique only provides a small adjustment. Thanks for the question.

@bodegatiger404

6 жыл бұрын

dre in the 616 yeah I just recently bought a low crown on field. It's a bit big and it doesn't seem to want to shrink but thanks anyways!

Where did you get this color for the Houston Astro’s hat?

@dreinthe616

3 жыл бұрын

Graphite on Black collection, all MLB, it was available around 2016/2017.

@TillMyDemise

3 жыл бұрын

@@dreinthe616 solid hat wish they could bring it back

Question, I understand you have this video on shrinking your cap. However, we never saw if the cap was big on (you never showed us the size difference to begin with.

@dreinthe616

4 жыл бұрын

I am probably shrinking it by 1/8 or less of a size, so I'm not sure a photo or video would really show that kind of subtle change. If you've seen any other videos that I've made, you know I get pretty detailed, but in this case there was probably not enough to visually demonstrate with a before and after. I do have a later video that talks about getting the correct size (esp. if you are planning to curve the visor) so that you don't have to shrink a cap (see here: kzread.info/dash/bejne/m2SBzc2BgK2eprg.html ) - thanks

I bought a 7 1/2 59fifty Low profile but I normally wear a 7 3/8 how many times should I do the method

@dreinthe616

5 жыл бұрын

I’d try 3-4, making sure to get the sweatband wet too - but this method will only give a little shrink. I’ve got another video about to go up - with a different way to make the cap smaller - stay tuned!

@dreinthe616

5 жыл бұрын

In case you didn't see it yet, I posted another way to make the hat smaller... watch kzread.info/dash/bejne/q3tt1MV-Z7jbhqw.html if you haven't been able to tighten the fit enough.

hellooo! i tried this once and made a slight difference but not much but i think it’s because i either didn’t wet it enough. or i didn’t heat it up enough. what would u say is a good amount of time i should hear it up when it’s wet. (seconds or minutes) if that makes sense. love your vids by the way!

@dreinthe616

3 жыл бұрын

I had to do this more than once, maybe 3 times - and heat until it completely dries out each time. Time that you spend depends on the heat from the dryer and how much you soaked the body of the cap. I'd say wet the inside of the fabric panels as well. I've got a couple of other videos related to shrinking, you can find those at my channel also. This method is more subtle than some others, but it preserves the cap. Thanks!

@vaniguwap29

3 жыл бұрын

dre in the 616 do i still dry it from the inside too or just from the outside

@vaniguwap29

3 жыл бұрын

do i blow dry the inside*

Just an update, I did it and it is effective. my cap was polyester. just be patient with the process. Thank you!

@alexisalbrights8203

3 жыл бұрын

How long did it take

@RafaelGarcia-ju1tc

3 жыл бұрын

@@alexisalbrights8203 usually i did it for 1 hr each session and i did it twice.

Can you do this for a fitted cap as well?

@dreinthe616

3 жыл бұрын

If you watched the video, I don't think that's the question you wanted to ask. The video was completely about shrinking fitted caps. Others have asked about snapbacks, so if that's where u were going, there may be some prior answers in the comments area.

@Nbrock90

3 жыл бұрын

@@dreinthe616 shit, sorry, lol. I meant to put snapback

Mine's tight enough because of the adjustable velcro strap, but it's too deep and goes over my ears. It says 19-768 100% cotton. Whould this technique fix that?

@dreinthe616

Жыл бұрын

Cotton will shrink more than other materials, but I'm not sure it will completely solve your problem with the cap being too deep, thanks.

I have a Mitchell and Ness cap that is big enough to put my finger in between the cap and my forehead. Is that going to be shrinkable? Or too much space?

@dreinthe616

2 жыл бұрын

You can only count on getting about 1/8 of size out of the cap... I'd try the other way of shrinking, which is to add filler - kzread.info/dash/bejne/aK5ow9Z_iZazaag.html - thanks.

I have a question 👋 almost every hat I own puckers like that and the crown on it is very boxy now should I buy a size smaller and stretch it or no just shrink it

@dreinthe616

2 жыл бұрын

For cap appearance, I think it usually works out better to stretch than to shrink... it helps avoid the visible signs of shrinking if you have to do a lot of it. But I have other videos on adding filler materials that help you avoid having to shrink it that far - I'd check out something like what I suggest here - kzread.info/dash/bejne/aK5ow9Z_iZazaag.html - it's a pretty quick alternative to shrinking, thanks.

@Dvillagrana

2 жыл бұрын

@@dreinthe616 what should I do for puckering like extremely puckering

My hats are all polyester. I did it once, and there was no change. Do I have to do it a few more times?

@dreinthe616

5 жыл бұрын

Yes, I’d recommend a couple more times... you can get the inside a little wet too. Poly will still shrink a bit, just not as much as wool. Doing it this way requires patience, but won’t cause the appearance problems you get with tossing it into the dryer. Good luck!

@dreinthe616

5 жыл бұрын

One other thing - the reason shrinking is tough is because of the plastic sizing inside the sweatband - see my 59Fifty Teardown video for more detail - kzread.info/dash/bejne/o5lkpsSMga6eoKQ.html

How can that possibly shrink the band and reduce the hat/head size?

@dreinthe616

5 жыл бұрын

Short answer - it really can't shrink the band and plastic sizing inside. The best thing it does is shrink the fibers in the fabric of the cap, slightly drawing in the band. I tried to make a few disclaimers in the video, this is not a huge change. If you really need to get it smaller without tossing it into a clothes dryer and possibly destroying the look of the cap, I'd suggest this way instead: kzread.info/dash/bejne/q3tt1MV-Z7jbhqw.html

@mrt1626

5 жыл бұрын

Ok. Thank you.

I have a 100% cotton 59fifty hat that is my size but an extremely large/ high crown. Do you recommend this method or another?

@elijah4878

4 жыл бұрын

I don’t think you can shrink the size of the crown, and if you were to try you’d probably make the hat too small

@dreinthe616

4 жыл бұрын

Depends on the buckram in the cap - if it's typical New Era buckram, it can't really be 'shrunk', but it can be molded "lower" to your head. You should check out one of my original videos - kzread.info/dash/bejne/aoJhp65motDNecY.html - and use the third technique there.

after we finish doing a round of spraying and drying the cap do we wait a couple minutes to do it again ?

@dreinthe616

3 жыл бұрын

If you dry it all the way, no need to wait. Just make sure to spray inside and out, get the sweatband too, and dry everything completely under high heat on the hair dryer.

@adren6128

3 жыл бұрын

@@dreinthe616 thank you for responding on a old video 👍

Thank you man! I had a hat that was 7 1/4 and fit very snug and when I bought a new hat same style brand etc I naturally got the same size again but this time either my head shrank or my other hat over time shrank so now my new hat is too big but after trying this it fits perfectly so thanks man!

@dreinthe616

3 жыл бұрын

Cool, great to hear, glad that it helped out!

My cap says mid & rear panels are 100% polyester and I tried this method twice now without seeing any results. How many times should I try?

@dreinthe616

3 жыл бұрын

I have a more recent video that combines this with another technique ( kzread.info/dash/bejne/lphnsc6Ej9rFgdo.html )... to answer your question, I usually do this 2-3 times, making sure to get the inside and sweatband wet as well - but this newer video combines it with adding some filler material. The spray-heat method will only reduce by 1/8 of a size or less, sometimes less with poly, thanks.

Will it shrink from a 7 1/4 to a 7???? Or is that to much can you help me out ASAP, please

@dreinthe616

3 жыл бұрын

1/4-size reduction is tough, but you should watch the video I just recently posted about combining two techniques to get a little more - kzread.info/dash/bejne/lphnsc6Ej9rFgdo.html - or go to my channel to find it, thanks.

You can also us a steamer

Hey Doug. Thanks for your help with caps! I have a question: can i use steam instead of hairdryer for this technique?

@dreinthe616

5 жыл бұрын

You could use steam to replace the mist spray, but I would still recommend the hairdryer to shrink it a bit... it's really the dry heat and moisture evaporation that makes the fibers draw in.

@andrehoudelot1011

5 жыл бұрын

@@dreinthe616 thanks a lot! I will keep the update to you and really appreciated the fact that you show the world the art of using caps ;)

@andrehoudelot1011

5 жыл бұрын

@@dreinthe616 hi Doug ! I have a Boston Red Sox 100% polyester 7 3/8 . I I have done this technique once and I feel the difference . Do you think that repeating this technique more than omce can help even better? Thank you

@user-zq1or3ro8u

4 жыл бұрын

André Houdelot did your hat get damaged at all?

The foam product you mentioned seems to be only available in the US. I'm in the UK and I got some interfold hand towels and folded them up into a thin strip and stuffed it in the sweat band at the back of my cap. Seems to have done the job but just wanted your take on it from the expert.

@dreinthe616

2 жыл бұрын

If that works it should be fine, just not as durable... but there should still be some foam strip products available to you under a search for "hat sizing" materials. And if that fails, felt or foam weatherstrip from a hardware shop also works... see here - kzread.info/dash/bejne/aK5ow9Z_iZazaag.html - thanks!

@creativename1235

2 жыл бұрын

@@dreinthe616 Cheers, mate. Love your videos.

Do you think this would be enough to shrink 7 5/8 to 7 3/8?

@dreinthe616

5 жыл бұрын

No, that would be too much to expect - a full two sizes. This technique is only for subtle changes, but you should check my channel for “The other way to shrink your caps” which has some suggestions for inserts to get a better fit. That is still a ways to go, but good luck!

@ziggyanderson5477

5 жыл бұрын

@@dreinthe616 Alright thanks

Are you spraying jist the fabric above the band? Or should I spray the band too? It seems like thats where its too big. New Era and their inconsistency. Couldnt find the one i wanted in store so i couldnt try it on

@dreinthe616

3 жыл бұрын

Yes, definitely spray/wet the sweatband too - on the inside of the cap also. If that does not get enough shrink after a couple of rounds, you can check my video "the Other way to Shrink" which gives another way to improve the fit, thanks.

@noway1880

3 жыл бұрын

@@dreinthe616 thank you very mich for answering !

How much shrinkage can you achieve? Like how many sizes down can you get a hat with this method?

@dreinthe616

3 жыл бұрын

For this method, I would not count on more than 1/8 of a size. I've got another technique to down size a little more ( kzread.info/dash/bejne/q3tt1MV-Z7jbhqw.html ), in fact I posted another one a couple of weeks ago that combines both of these techniques, go to my channel to find that one, thanks.

What about acrylic hats?

@dreinthe616

5 жыл бұрын

I've never worked with a 100% Acrylic baseball cap, only blends. And of those, I've not had to shrink one... so unfortunately I don't have a good answer for that.

I bought today a 59fifity and yes it works thx

@daejahjackson5123

3 жыл бұрын

Did you have to do it more than once?

@emranhagi8504

3 жыл бұрын

@@daejahjackson5123 nah bro first attempt