Unbelievable craftsmanship and excellent video & explanation! Can't wait for more!

@elams1894

8 жыл бұрын

+WeBDaEMoN33 Thanks webdaemon, much appreciated!!

You are the master of patience! your workmanship is a state of the art :)

@elams1894

8 жыл бұрын

+Sinlo Kemp Thanks so much Sinlo, really appreciate it!

The most beautiful gimbal that I have ever seen! Good job!

@elams1894

8 жыл бұрын

+Laurynas Valčaskas Really appreciate that Laurynas!!

Incredible stuff, the threads from the waxed bolts is pure genius! Will steal that idea. Keep up the good work, your gimbal looks better than a lot of commercial stuff.

@elams1894

8 жыл бұрын

+jackosmeister Thanks Jacko! ! Glad you enjoyed the vids, it's been slow progress but should have next video installment pretty soon, have a great day!!

Spectacular work mate. Unparalleled attention to detail.

@elams1894

8 жыл бұрын

+Jess Neal Thanks so much Jess!

Why aren't you my next door neighbour??? So fun to watch!! So much talent... so genius... I can't wait to see it all come together:-)

@elams1894

8 жыл бұрын

+Woodeso's Guitar Mods Thanks again Woodeso!! We would indeed make some cool stuff!!!!

priceless collectable piece

I really love this build! This is looking profesional! You got a new subscriber!

@elams1894

8 жыл бұрын

+Tim van Gool Thank you Tim! So glad you enjoyed the vid, its been a bit sow progress but should have the next vid up soon. Have a great day!

Great job, slowly slowly catchy gimbal. Thanks.

@elams1894

8 жыл бұрын

+Wheel333 Thanks wheel!!

Still enjoying this series! You got pretty crafty on this one.

@elams1894

8 жыл бұрын

Thanks Greg! Hope you are doing well!! Have a great day!

Your attention to detail is impressive. I humbly want to help you with your "hole drill thingy" or what you said and geek out with you. The hole tool is called a Hole Saw and the blade is exactly manufactured like a jig saw blade, a reciprocating blade in that it requires a hard metal for the teeth, but a spring elastic metal for the base for flexibility. It is produced from laser welded (today, not sure how they did it for your older version) HSS weld to spring steel to provide optimal wear resistance to the saw teeth and a flexible body for fatigue resistance. Whew...

Nothing wrong with attention to detail mate !! Its coming along nicely. Your a wiz with the carbon fiber

@elams1894

8 жыл бұрын

Thanks fletch!! Hope you are doing good! This project is turning into a bit of a monster, but I'm liking it alot, the problem solving is oddly quite enjoyable. Have a great day!!

wowwwwwwww hell watched the first one and then i wanting leaving until i had seen the rest man I'm lost for words just love it such talent I'm subscribing

@elams1894

8 жыл бұрын

+Mike Keen Thanks so much Mike!! So glad you enjoyed the vids, have a great day!!!

100% pure hand made ! ! !

its great bro

Nice idea for the bolt holes on the CF discs! I've been wondering how I could do something along those lines (although not for photography...) Thank you for the great video series!

Wow... What museum are you going to put it in when you are done? Amazing work. I feel I should give you a ton a credit on your video work as well. It is fantastic. To juggle such a 'tedious' project, with all of the attention to detail, while maintaining superb camera angles and capturing the build in such detail is just great to see! And great editing on top of it all! You, sir get an A+. Subscribed and sharing! -Kenny

@elams1894

8 жыл бұрын

+Kenny Tilney Thanks so much Kenny!! So glad to hear your kind words on the film work. It does take a large amount of time indeed and esp tricky when resin is everywhere, but I find it a lot of fun. Just waiting for my decent mic to arrive so the audio will be greatly improved. Sorry for the delays in the getting the next video up, I just started a new job and time has gone out the window, but I'll get there. thanks again Kenny!!!

Wow it's looking good so far, haha I laughed when you said looks like a dogs breakfast thanks for the video

@elams1894

8 жыл бұрын

+matt Hajas Thanks Matt!!!

simply too good

@elams1894

8 жыл бұрын

+Ed Dubnitsky Thanks so Ed!!!!

Love your work very much 👍.I have a question about a motor, where can I get a motor like that, or can I use another motor ? I'm too lost!😞

plz tell me where can i get that carbon fiber wires ?

Nice as always. Balsa/carbon fiber guitar next?

@elams1894

8 жыл бұрын

+Fluburtur Now theres a thought!! Thanks dude!!

I would really like to see the mixing of the resin and getting it in the "strings" of carbon!

@elams1894

8 жыл бұрын

After mixing the epoxy I dip my finger in the resin and slide the strand through it a few times. There is footage of this process in build vid 1. Thanks!!

Kick ass build bro. Can't wait too see it in action! Are you going to use the simple BGC board, or something else..... rasberry pi?? I was also trying to work out where bouts you are in NZ. Ohope??

@elams1894

8 жыл бұрын

+Hilton Goldsmith Thanks Hilton! Yes I have the simple BGC board (Alexmos original from Latvia), just trying to get my head around the layout but Iv soughted it out now I think. I do alot of my vid work in Onemana Coromadel, thats where the beach is. A lovely place where I would love to be all the time but alas work is in Auckland. Thanks again!!

Immense work and the final piece turned out brilliantly. You're doing John Britten proud! Can I ask what method you use for soaking the carbon tow without over saturating it?

@elams1894

8 жыл бұрын

+Paul Whelan Thanks for the kind words. I squeeze the resi through the tow between my thumb and forefinger that has a bit of resin on it. Both forces the resin around the fibers and gets rid of any excess. Cheers!

@nguyenbanmai3940

7 жыл бұрын

elams1894 r5

Hey, what motors did you use?

@elams1894

8 жыл бұрын

+Power Supply I used 2x iflight 5208-200T for the PITCH and ROLL axis (I actually ordered 180T's but they sent 200T's, but I don't think it matters too much) + 1x iflight 8017-120T for the YAW. Cheers.

I'm pretty sure that thingy is called a hole-saw

You need to make a big multirotor to get that rig airborne.....

@elams1894

8 жыл бұрын

+PlaneCrazy so true, it might have to be done indeed

@elams1894

8 жыл бұрын

+PlaneCrazy so true, it might have to be done indeed

wow

@elams1894

8 жыл бұрын

+Hasan Redzic Thanks Hasan!

Really nice work dude! You would love the prototyping videos on Dan Gelbart's KZread channel I reckon, a really unique take on precision and efficiency. I watched them all before googling the guy and finding out he's a frickin' billionaire.

@elams1894

8 жыл бұрын

Thanks for the heads up and kind words. Dan is an interesting dude, cool video series, I checked a couple of vids, very interesting, thanks again!

stop doing things like this. Im getting caught up in all the excellency and not doing my job.. this really amazing. How many hours did you use to make the damn thing ? and man, it would cost a million dollars to buy

@elams1894

7 жыл бұрын

Ha ha thanks Thomas!! Thanks for kind words. This, without doubt, was the hardest thing I've built, my brain just kept hurting. Waaaay too many hours were spent that I have lost count. In addition, I knew that when I finished that I would find a better way to build a part and so it can be never ending. But I'm super pleased that this is built and actually functioning better than I hoped, very pleased. Thanks so much once again for your kind words and have a great day!!

kind of reminds me of john britten bro haha

@elams1894

8 жыл бұрын

Thanks heaps jono!! Really glad you enjoyed the vid, cheers

too much...

@elams1894

8 жыл бұрын

Thanks dj!!

get a 3d Printer! then get a life :)