Carbide Circular Saw. Horizontal Machining Center & CNC Machine In Working. Ion Nitriding process
Ғылым және технология
Carbide Circular Saw. Horizontal Machining Center & CNC Machine In Working. Ion Nitriding Process
Chapter:
0:09. LINSINGER Carbide Circular Saw KSS 800
2:03. Automatic Circular Saw Machine
3:56. Small insert widths to save material
4:58. Interrupted turning
6:00. Horizontal Machining Center
6:51. Ingersoll Germany - Coolant housing
10:07. Ion (Plasma) Nitriding process
-------------------------
Credit:
Linsinger Maschinenbau GmbH
www.linsinger.com/
Shanghai Loginfly Sawing Technology Co., Ltd.
www.loginflygroup.com/
Hwacheon Asia Pacific Pte Ltd
hwacheonasia.com/
Sandvik Coromant
www.sandvik.coromant.com
Ingersoll Cutting Tools
www.ingersoll-imc.de
Ionitech Ltd.
www.ionitech.com/
-------------------------------------
X-Machines Channel
Website: www.xmachines-co.com/
Fanpage: / x-machines-10949018502...
SUBSCRIBE: bit.ly/3e8Hz7t
We would like to support all companies or people to promote their products, service, or company. If you need our support, don't hesitate to contact us via email wowtv2050@gmail.com.
If you are a copyright video owner and don't want us to use it in this video, please contact us via email wowtv2050@gmail.com. We make sure to remove your video immediately.
Thanks for your co-operation.
-------------------------------------
Disclaimer: X-Machines is not affiliated with the businesses whose products are shown in this review. Any trademarks depicted are the property of their respective owners.
---------------------------------
⚠️ Copyright Disclaimers
• We use images and content by the KZread Fair Use copyright guidelines
• Section 107 of the U.S. Copyright Act states: “Notwithstanding the provisions of sections 106 and 106A, the fair use of a copyrighted work, including such use by reproduction in copies or phonorecords or by any other means specified by that section, for purposes such as criticism, comment, news reporting, teaching (including multiple copies for classroom use), scholarship, or research, is not an infringement of copyright.”
• This video could contain certain copyrighted video clips, pictures, or photographs that were not specifically authorized to be used by the copyright holder(s), but which we believe in good faith are protected by federal law and the fair use doctrine for one or more of the reasons noted above.
Пікірлер: 43
To people that have never been in a machine shop let me tell you something. High school I was learning to be a machinist. Graduated 1980 and went to work for a once large manufacturing company. All manual machines and broken up so each type of machining was together. Building in Beverly Massachusetts was a mile long and at one time all 3 bays 3 stories high were occupied in its heyday. Company finally closed up and I went to work in a modern cnc machine shop. 82 I started and learned every thing I could. 83 went to work for GE and my final job was an Ingersoll upgraded to 7 axis CNC horz boring mill. The machining in this video in old days would of been done by multiple machines and a couple of days to final piece. 1987 I left GE and the machining trade because there was no future and manufacturing the old way would disappear. Most American manufacturing left the country and the ones that stayed were modern. It is amazing to see CNC machining and also they can inspect the work. My 7 axis were 1axis. x 40 useing floor as table +2nd axis. 15 foot rotating table beside floor that also 3rd axis. moved in and out. 4th axis. Y axis 15 ft. 5th. . Z was 12in ram with. 6th axis. 6 inch spindle and 7th axis was attachments that went on ram . This was over 40yrs ago and i forgot letter designation on some axis and my measurements are not exact but it was largest 7axis in U.S. at that time
@Skinflaps_Meatslapper
Жыл бұрын
Thanks for telling me something. Not sure what I was I supposed to get out of it, but let me tell you something in return. That torture test with the square stock was nothing compared to what I could do to it. I'd make that little cutting tool cry for its mommy in a screeching and chattering white hot sparking mess, because I'd have no clue what on earth I was doing other than fiddling around with knobs and buttons to see what happens.
@vintageludwig
Жыл бұрын
What's your point?
@skipd9164
Жыл бұрын
@@vintageludwig if your asking me. Very few machinist have the opportunity to operate large machines. I believe operating a machine and doing it for RD project. The high speed reduction gearing is now in operation in the destroyers. Many machinist never see machines that need overhead cranes to load big parts. That's all my comment was about.
@skipd9164
Жыл бұрын
@@Skinflaps_Meatslapper your mom let you out of the basement
@bryantburns3664
Жыл бұрын
Shut up
有先进的设备，刀具，有先进技术人员才能生产先进的工件和设备👍
1:32 That's a really good saw, makes a beautiful clean cut. More like a milling cutter than a saw. It cuts that steel like it's aluminum.
Фантастика !!!
Stahl wie Butter bearbeitet
Plasma nitriding??? That sounds awesome!! I wonder what would be the difference with the parts with PN compared to basic heat treating.
isso que é perfeição.maravilhoso.lindo demais.fantástico.parabens.sucésso.blz? valeu i abraços..
11:56 Menu in Russian.
Cutting gear blanks? Like to mike some of those to check parallel. God these machines today.
11:53 Console captions in Russian, amazing :)
Krank Wie Schnell die Säge ist
6:49 what’s inconnel?
TOP!
@benjaminsisko5977
Жыл бұрын
VERY IMPRESSIVE...
Muito bom.
6;14 herringbone gear? Wow
No coolant was harmed during the making of this film 😂
@owen368
Жыл бұрын
If they had used coolant we would be able to see nothing but coolant.
12.57 looks like some Star Wars shit
I want one!
😎😎😎😎😎👍👍👍👍👍👍👍
"LINSINGER Carbide Circular Saw KSS 800" - a textbook example of "How NOT to design an operational cycle of a machine".
10:40 Gloves?
🧐👍👍👍💪💥💥💥
Это где? Всё на русском написано
@user-nj7re8cc4l
Жыл бұрын
компания "ionitech" болгарская. Выпускает оборудование в основном для российских потребителей.ООО «Уралмаш НГО Холдинг», ПАО «Калужский турбинный завод», ПАО «ГАЗ», АО «ОДК» Единственный официальный представитель в России - ООО «ИОННЫЕ ТЕХНОЛОГИИ». Потому и на русском всё меню.
لمًا لبثوا في العذاب المهين) زز😂ووالله اعلم بمن هو امن به
Это станки русские, или производство в России?
@slondominik
Жыл бұрын
Ты, Zек, а ты чё? Какие станки в России? У вас сейчас никаких своих станков, всё импортные! Станки? Мечта поета, у вас даже никто подшипников не делают! И будет только хуже, благадаря вашему бункерному Фуреру. "Дурак богатеет думкой", скажем тaк... ;-)
@user-nj7re8cc4l
Жыл бұрын
компания "ionitech" болгарская. Выпускает оборудование в основном для российских потребителей.ООО «Уралмаш НГО Холдинг», ПАО «Калужский турбинный завод», ПАО «ГАЗ», АО «ОДК» Единственный официальный представитель в России - ООО «ИОННЫЕ ТЕХНОЛОГИИ». Потому и на русском всё меню.
@maestrogolitsin4150
Жыл бұрын
В России даже молотки китайские, откуда станки? 😂
Dear editing team if you put white text pls don’t put white text over the also white name of the company because you can’t read it that way. Thanks for reading. Nobody
@Crsf84
Жыл бұрын
Hi Richard, I hope the now look at your vids for reference . Thanks
5:00 いやすごいけど意味ねえ笑 丸棒使ってくれ！
Advertising. I despise advertising. These are now pasting ads all in their videos, and I'm not shopping for this junk. NO THANKS.
Pruduct of germany
@uraltermosvar
Жыл бұрын
@@Ggyyddkkffn8171 But the system is completely in Russian😉
🤓❤❤❤👍