Wish this channel existed 20 years ago when I was a teenager just getting into car audio. Everything I learned I had to dig around on the forums and spend hours upon hours doing research.
@robbert5198
3 жыл бұрын
Literally thinking about not going to college and just do car audio
@DJDOUBLE0772 жыл бұрын
Mark is very thorough and detail oriented. You can find everything you need from his channel. It's nice to find it all in one place. When I was 18 it seemed like everything was shrouded in secrecy.
@vincentcisneros97375 жыл бұрын
Nice. Now I can tell my friends just go watch the video and quit asking me. Haha!
@soundman_caraudio5 жыл бұрын
👌👌👌👌 good stuff dude :)
@dalegribble7760
5 жыл бұрын
SoundmanCA When will the new box be done ??
@ricardogaribay1991
5 жыл бұрын
SoundmanCA 100%
@brianhollingsworth6091
5 жыл бұрын
Good info as always
@ruikazane5123
5 жыл бұрын
Straight from the kitchen fab HQ!
@chrisjoachim7040 Жыл бұрын
This is exactly what I was looking for. And They say the KZread search algorithm is broken. Props on the video. Perfect place I could have started my journey into custom audio.
@wesjacobson66755 жыл бұрын
Dude! You’re helping out the car audio world so much with your videos. I talk to people all the time that have no clue what I’m talking about so thank you
@FatNebraskaMom4 ай бұрын
I love this channel. Gods this just explained the whole thing. And explained why my new speakers sound like crap 🤣🤣🤣.
@audiohutch5 жыл бұрын
Ive always been inspired by you and I love your videos. Ive been trying to create some boxes myself and I do a bunch of LEDS for them. I really enjoy it!
@stevie-d31515 жыл бұрын
Very good info.Starting to get back into car audio. It's a lost art.
@cartruck10703 жыл бұрын
I like the way you did your teaching on this vid vs the box volume vid. Easier to understand. Thank you.
@NobleShenron5 жыл бұрын
Great video, terms you can also explain would be, ohms, bridging an amp, capacitors, clipping an amp, distortion from subs, airspace I know you hit that one but...
@JacobFrey
5 жыл бұрын
Ah, yes. Speaker ohm ratings are an extremely common spec that everybody in car audio should understand. It affects amplifier performance and speaker performance.
@Samsquamsh5 жыл бұрын
Could you make a part 2 going over what ohms mean (in laymans terms lol); monoblock, 2 channel and 4 channel differences; what each knob on a standard amp does; what parallel wiring is, etc. Thanks in advance!
@brentm88632 жыл бұрын
I'm trying to learn all about car audio for my work, so learning the basics. You did well on how you presented the infomation.
@pablodariobenitezdesvars7746 Жыл бұрын
Thank you, concepts are now super clear for me.
@babydyke4163 жыл бұрын
I have watched this almost a dozen times! Great info and I WILL GET THIS DOWN!! Thank you for all of your videos, they have been helping me to understand all of this before I actually start my build and choose what all I want for it! Best audio information KZreadr that I have found!!! You sir are amazing and awesome! Thank you for giving your time to help others like me learn and understand! 😊🤗💞💯
@user-bt9uz7iq6g
2 жыл бұрын
Ééé é ée êe éé é ré é e ce é
@kuruption19834 жыл бұрын
Honestly bro.... This was the best darn video... I learned everything I needed to know in 15 mins.... Perfection and preciseness.
@DrummerBoii14115 жыл бұрын
Bruh.. you just explained everything!! Literally everything an average guy at home needs to know. I know a little more but generally if someone watches this and went to a shop for installation they’d know enough to see if they’re getting ripped off or bad job done. Nice one buddy! I like this!
@Eric.Mercado Жыл бұрын
This video was extremely helpful. Thank you!
@alexandfelicity10 ай бұрын
This is such a helpful video 🔥🔥🔥💯💯💯 I've been needing to know what cross overs were in particular and this clears it up great
@kazzng20875 жыл бұрын
I already know a lot of this stuff but nothing wrong with a refresher now and again. Awesome vid 👍.
@kene90803 жыл бұрын
Hey man great job with info videos I am new to car audio world i have just finished install on my budget build 2 svc 4ohm 12s picked up for 50 each built box enclosed before I knew anything picked up amp from Wal-Mart 1000 wat 4 channel jensen and ran into few probs was so mad 😠 was bout to give up then started watching some your videos and realized I had factory head unit but was using rca low input when i needed high was blowing fuses nightmare all figured out now so im hooked gonna stay with this set up till I can do these big upgrades still alot to learn so keep them videos coming thanks man great job
@jar1450225 жыл бұрын
I may have missed it but oms it’s something everyone should know about also
@fredmartinez42484 жыл бұрын
Best explanation in the world thanks for your time and knowledge
@dwreed632 жыл бұрын
Awesome, GREAT info to help me choose system components
@jamessong5838 Жыл бұрын
This is really great information! Thank you!
@UnofficialAudio5 жыл бұрын
Good stuff! The car audio dictionary.
@CarAudioFabrication
5 жыл бұрын
Glad you enjoyed, I know a video like this would have helped me immensely when I got started, so figured I would try to help you guys out!
@davoupnya3202
4 жыл бұрын
@@CarAudioFabrication Your a good man Mark, and thank you for all you do for all of us !
@rex44rm5 жыл бұрын
Man I’m glad you exist! Lol I was finally able to explain to my lady on the terms of audio! She’s was always asking and I really just couldn’t explain into detail on what the terms were and into detail ! Thanks for helping me and possibly everyone else!
@vathnamean71555 жыл бұрын
Thanks very much Mark, for this great sharing. I just know and understand that DSP is a must component for audio system. From this video, I explore more about the DSP, and now I can tune my after market radio unit and amplifier to sound like the factory built in audio system :) Great thanks for this fruitful sharing :-)
@Titan-gs6cf3 жыл бұрын
Hertz was definitely the cutest term on this list
@genericdude6551 Жыл бұрын
Cool dog. Hertz is also a speaker brand. I'm a retired electronic technician so I understand all these terms but I do occasionally come across something I hadn't heard before. It's interesting some vendors don't recommend a crossover for component systems - probably because the tweeters come with an inline non-polarized electrolytic capacitor whose capacitive reactance increases as the audio frequency lowers. I wish I still had access to all that test equipment you have.
@michaelpedigo4475 жыл бұрын
Good info wish you would have explained clipping when you discussed the gain. Been watching a lot of your vids and am about to try fiberglass for the first time
@CarAudioFabrication
5 жыл бұрын
The video I linked goes into that, hopefully those looking for more info will follow to that. :)
@michdavelz5 жыл бұрын
You should build a wall sometime! It would be fun to see all these techniques you show us in each of your videos used to build something for SPL 😀
@garrisonhathcock48475 жыл бұрын
Maybe a video on the quality of speakers and what are good speakers for your application
@adrianhernandez38024 жыл бұрын
great video, thanks for spreading the knowledge, wish i would found this channel before i started my car audio upgrade, the professional car audio stores in my city were not the best resource for helping me come up with the best system for my application.
@Wisconsin4eyes3 жыл бұрын
Thanks for making this quick and informative.
@nicholasrogers80592 жыл бұрын
Amazing tutorial.
@gib9193 жыл бұрын
Great Video👍🏿 I know im late, it being 2 years old already. Im an amature installer, and when I go to the local sound shop and begin inquiring about these Particular products, I cant seem to get them to go into details like You. because Im wanting More control, planning on going with Focal 3way comps in my Caddy Srx(2014 Premium)for my front stage, Deleting the center stock speaker, and now, realising how the position should be angled, But my Rear stage is a pickle for me, Because of those 2 speakers in my rear decklid. Now, after listening to You, solidified my choice in for my rear doors & decklid & about investing into an A/C DSP. Most importantly, saving me some $ in my build. And intergrate my new Tesla style unit. Thanks!✌🏿
@joshgour88775 жыл бұрын
Got the opportunity to see this video early and much more when I became a part of the pateron team, great stuff mark
@thebionicpig5 жыл бұрын
Well somebody has been attending Dr. Evil's sign language classes.✌"LASER BEAM" ✌ By the way great video...👍
@CarAudioFabrication
5 жыл бұрын
Freaking laser beams!
@Klatch893 жыл бұрын
Awesome video thank you!!!
@nelsonchen35933 жыл бұрын
Good stuff 👏🏻 thanks 🙏
@johnchristiansen6200 Жыл бұрын
On the back of the head unit there are many abbreviations on the connections go over them and explain their use
@31acruz Жыл бұрын
Good video !!! well done.
@breosk5 жыл бұрын
Very useful Video. Thanks for making these videos, I bet many will Serve. Greetings Mark from Mexico
@paulmendez83275 жыл бұрын
Great info, brotha.. thanks for taking the time to explain these terms.
@zandern94895 жыл бұрын
Thank u for taking time to do this👍 Maybe some specifics on speaker definitions? And maybe u already covered this in a speaker selection video, but Freq response, S/N ratio, or for bass box building Qts, Fs. Bet your sound stage is on point in that car🤘
@davelettman70275 жыл бұрын
Grrreat stuff dude!!!! That really helped, I have one question though in modern amplifiers what would be the dangers of hanging them upside down on the roof of an SUV?
@craigdennis87195 жыл бұрын
Just a thought. I’m sure some people would like to see a video about wiring subs. Going over the different ohm loads how it affects the amp and things like that. Thanks and keep the videos coming
@slimbuick5 жыл бұрын
Nicely done Mark!👍👍
@shelleygold4923 Жыл бұрын
I appreciate this info....I like to be prepared so I'm not ripped off. Audio places want to sell equipment more than fixing sound. I'm happy to pay for more labor! Levinson systems should NOT have aftermarket replacements, no?
@josea.garcia39945 жыл бұрын
Great great video Mark!!!! 👍👍👍 It was very helpful for people who are trying to learn about car audio!!! As far as when you talked about the difference between SPL, SQ, and SQL sound systems, for a person to achieve having a SQL sound system what kind of sub's, speakers for the mids and highs, and amplifiers would a person have to use to be able to have that kind of sound system!!! I have only seen people with either SPL or SQ sound systems!!! How would a person be able to distinguish between a SQ vs a SQL sound system when listening to both Mark??? Please explain!!! Once again great video!!! 👌👌👌
@SanchoSanto5 жыл бұрын
Great stuff! I finally understand crossover and hertz ranges. I haven't seen a video yet about cables. What makes a good cable and what should I avoid.
@clearme25 жыл бұрын
You’ve taught Doug B. Very well 👍🏻
@mtkreger5 жыл бұрын
Got some serious equipment in that trunk there! Nice
@PANTYEATR15 жыл бұрын
this was a classic video Mark, thanks
@12Messenger5 жыл бұрын
Very good
@tylerbrice58055 жыл бұрын
Great video, I definitely needed that!
@arjitjha93434 жыл бұрын
Can you make a video on explaining components,coaxial,subwoofers,crossover,bass tube etc and who should pick what and types of setup
@heavychevy3835 жыл бұрын
...a fellow dog lover... i knew he was a pretty cool dude, but that confirms it... a dog named hertz... VERY cool dude! ...thats awesome... & good job on the vid man... ive heard alot of these terms before, & even had a general grasp of the meaning, but i did not know alot of the technical aspecs behind these terms... thanx bro & god bless u & hertz
@joshuavallejo94395 жыл бұрын
Epic info as per usual!
@marcialinho1747 Жыл бұрын
Thanks 🙏
@waynepile50845 жыл бұрын
Like? No, love! Awesome video dude! Great info explained very well! Keep up the good work!
@cain2bad5 жыл бұрын
Nice job
@itzjust_elias40885 жыл бұрын
Should make a video about choosing the right head unit for the type of audio system people use.
@PulsaStart3 жыл бұрын
Do I need a crossover if I'm installing 3-way coaxial speakers?
@lsnow38923 жыл бұрын
I love the way you talk. I wish I talked like you with my voice. Haha
@JG_RepairandClean4 жыл бұрын
The rms to max always gets me
@andrewbakenhus79803 жыл бұрын
Love the video only suggestion is maybe in the description list each word in bulletin with or without definitions would be very helpful for a refresh without watching the whole video again.just starting to get into car audio running 2 sav2 12s with a sa3000d on stock doorspeakers and pioneer headunit. Thinking about putting 2 alternators in with capacitor. Any suggestions would be helpful! Looking to upgrade door speakers whenever i have more money and get tweeters with 3 components
@joeyturbo113 жыл бұрын
So, if I have 75 watt RMS speakers x4, would I need a ~75 watt RMS amp, or a ~300 watt RMS amp?
@CarAudioFabrication
3 жыл бұрын
75 watts per channel aka 300 watt amp
@aileenxxxx84705 жыл бұрын
wow!Very professional sharing!
@mattalones935 жыл бұрын
Fuck yeah, Mark! Very well presented. Wish your channel (and KZread) were around back in the day when I was learning all this stuff. You just saved so many people so much time!
@cleanrt46695 жыл бұрын
Any good batteries you would recommend
@fudanjx2 жыл бұрын
great stuff
@valerianpantsulia17304 жыл бұрын
Great information great videos ....thank you?
@seanchristopherdanieldiaz97913 жыл бұрын
Omg thank you so much
@TheStonerzombie4204 жыл бұрын
Sweet dog dude. Hi Hertz!
@philb7075 жыл бұрын
Another well done video...stuff like this is why KZread exists.
@amb3cog
5 жыл бұрын
No. KZread exists to make money.
@fishheadH2o
5 жыл бұрын
SO TRUE!
@philb707
5 жыл бұрын
@@amb3cog You so smart
@amb3cog
5 жыл бұрын
@@philb707 Lol Sorry. Couldn't resist. 🤣🤣🤣
@ilovetoyotatrucks5 жыл бұрын
Damn dude those fusion audio are dope brahhh!
@PaKoF9425 жыл бұрын
Hi Mark, can you make a video talking about different configurations of time alignment, thank you from Mexico
@Notion655 жыл бұрын
Please help me. I have an alpine 600 watt amplifier and two 10 inch kickers. Just the other day the amplifier was blinking red and now that I've regrounded the wire, it's back to normal. Except when I hook my subwoofer the subwoofer shoots up and stays in the up position. Everything is connected right. Any tips? Thank you
@davewood4293
5 жыл бұрын
Sounds like the amp is putting out a DC signal to the sub. That ain't good
@maartenyzer41215 жыл бұрын
Hertz is a nice friend..
@thegreatempire38825 жыл бұрын
If I’m using a 5.25” mid driver of a component set in a 6x9 opening and I want to get the most out of that speaker, what do I need to do? I was thinking of a 6x9 foam baffle filled with poly fill
@thegreatempire3882
5 жыл бұрын
I would like that, but that is not a choice. I hot a Herts Hi Energy HSK 130 and I cannot get a 6.5"
@frankie7x3 жыл бұрын
Halfway thru your video and I regret ever looking into wanting to put a sound system in my car
@CarAudioFabrication
3 жыл бұрын
You can just throw some speakers in but don't expect much performance. If you want the best be prepared to do research and design the system correctly.
@frankie7x
3 жыл бұрын
@@CarAudioFabrication it’s not that...I’m a complete beginner. I watched this video to get myself acquainted with industry terms, but just like a professional guitar player giving lessons to a newbie, you go off into these wildly specific and descriptive things when maybe I should watch more videos before looking at yours.
@louisstrappazon45885 жыл бұрын
Thanks now i know stuff about speakers😂
@steelresilience5 жыл бұрын
Could you explain some advanced stuff like "Depth" as you mentioned in this video? Maybe rear fill, subsonic filter, and bridged.
@CarAudioFabrication
5 жыл бұрын
These would be some other good terms to add. For VERY DETAILED ADVANCED info on crossovers watch this video: kzread.info/dash/bejne/dHh_rrusd9yohrg.html
@steelresilience
5 жыл бұрын
Summing too!
@kennethterry71753 жыл бұрын
Can you possibly explain what it means when people talk about negative db?
@ryanstewartbell
3 жыл бұрын
When you are recording or editing an audio file on the computer the units are opposite so it goes from negative infinity up to 0. If it gets too loud, it hits -6 or up to 0 then you get peaking and distortion which are the horrible sounds that clip the audio. So when you are recording you want to stay away from that area and have it around -12 and adjust the gain on your recorder so the audio levels don't reach too high
@karanvir19915 жыл бұрын
Hey.... Can you tell me what gauge wire is good for high level input from factory radio to amplifier for sending signal from radio to amplifier..
@SS-ug1qy3 жыл бұрын
I upgraded my old stock speakers with the new aftermarket speakers for better sound to my stock head-unit radio that has built-in GPS and XM and other apps that I use so don’t wanna change that however, my speakers sounding worse than before. Do u why is that?
@bobbyroberts57515 жыл бұрын
I understand you explained the point of crossovers, but do you really need a crossover for a sub woofer and all speakers? Never seen one so curious
@C1PH3R_og5 жыл бұрын
Hey man I love your videos especially your budget section. l just watched your T line video and i was thinking could your build a full SQ style car audio setup using things like parts express, dayton audio, maybe even cheap Walmart kickers? If so please explain your choice also probably skip the dsp cus most peoples budgets can't seem to afford one... so maybe a more affordable way to do time alignment. Any thanks for the awesome videos I would really like to hear your opinion one what I would call the High School Setup lol
@mushy199215 жыл бұрын
Could you do a video on ported sealed and free air as I'm planning on putting a sub on parcel shelf to replace stock sub. The qts really important?
@londondhal13015 жыл бұрын
what do you think about headrest speakers?
@Drfrodoskywalker5 жыл бұрын
He talked about a 3way, every mans dream.
@GewoonJelleYT5 жыл бұрын
That dog is so Cute 😍 +1Subscriber!
@lkjyuiop19875 жыл бұрын
I got to take a poop and going to watch this as I take a 💩
@JohnDoe-us1ek
5 жыл бұрын
lkjyuiop doing this right now 🤣
@adaboy4z5 жыл бұрын
Need some cheap but decent 6.5 speakers. My car has 2 sets and 2 flush mounted tweeters with 6x9 in back deck. Its a Harmon Kardon system. Suggestions?
@nebulousJames123454 жыл бұрын
Where is the balancing out the system video?
@johnrebello70593 жыл бұрын
I need help on a 4 channel amp.i have 6.5 front door component speakers and 6×9 3 ways speakers for rear.my 4 channel amp has a lpf or full range or hpf.which do I set for speakers?and how do I Set Hz for front and rear speakers.?
@cridr5 жыл бұрын
great quality info, good throughput of information when listening at 2x , I would give you multiple likes if I could.
@Bruh-px4tr5 жыл бұрын
So would an average 6.5 inch door speaker be the same as a mid range speaker?
Пікірлер: 190
Wish this channel existed 20 years ago when I was a teenager just getting into car audio. Everything I learned I had to dig around on the forums and spend hours upon hours doing research.
@robbert5198
3 жыл бұрын
Literally thinking about not going to college and just do car audio
Mark is very thorough and detail oriented. You can find everything you need from his channel. It's nice to find it all in one place. When I was 18 it seemed like everything was shrouded in secrecy.
Nice. Now I can tell my friends just go watch the video and quit asking me. Haha!
👌👌👌👌 good stuff dude :)
@dalegribble7760
5 жыл бұрын
SoundmanCA When will the new box be done ??
@ricardogaribay1991
5 жыл бұрын
SoundmanCA 100%
@brianhollingsworth6091
5 жыл бұрын
Good info as always
@ruikazane5123
5 жыл бұрын
Straight from the kitchen fab HQ!
This is exactly what I was looking for. And They say the KZread search algorithm is broken. Props on the video. Perfect place I could have started my journey into custom audio.
Dude! You’re helping out the car audio world so much with your videos. I talk to people all the time that have no clue what I’m talking about so thank you
I love this channel. Gods this just explained the whole thing. And explained why my new speakers sound like crap 🤣🤣🤣.
Ive always been inspired by you and I love your videos. Ive been trying to create some boxes myself and I do a bunch of LEDS for them. I really enjoy it!
Very good info.Starting to get back into car audio. It's a lost art.
I like the way you did your teaching on this vid vs the box volume vid. Easier to understand. Thank you.
Great video, terms you can also explain would be, ohms, bridging an amp, capacitors, clipping an amp, distortion from subs, airspace I know you hit that one but...
@JacobFrey
5 жыл бұрын
Ah, yes. Speaker ohm ratings are an extremely common spec that everybody in car audio should understand. It affects amplifier performance and speaker performance.
Could you make a part 2 going over what ohms mean (in laymans terms lol); monoblock, 2 channel and 4 channel differences; what each knob on a standard amp does; what parallel wiring is, etc. Thanks in advance!
I'm trying to learn all about car audio for my work, so learning the basics. You did well on how you presented the infomation.
Thank you, concepts are now super clear for me.
I have watched this almost a dozen times! Great info and I WILL GET THIS DOWN!! Thank you for all of your videos, they have been helping me to understand all of this before I actually start my build and choose what all I want for it! Best audio information KZreadr that I have found!!! You sir are amazing and awesome! Thank you for giving your time to help others like me learn and understand! 😊🤗💞💯
@user-bt9uz7iq6g
2 жыл бұрын
Ééé é ée êe éé é ré é e ce é
Honestly bro.... This was the best darn video... I learned everything I needed to know in 15 mins.... Perfection and preciseness.
Bruh.. you just explained everything!! Literally everything an average guy at home needs to know. I know a little more but generally if someone watches this and went to a shop for installation they’d know enough to see if they’re getting ripped off or bad job done. Nice one buddy! I like this!
This video was extremely helpful. Thank you!
This is such a helpful video 🔥🔥🔥💯💯💯 I've been needing to know what cross overs were in particular and this clears it up great
I already know a lot of this stuff but nothing wrong with a refresher now and again. Awesome vid 👍.
Hey man great job with info videos I am new to car audio world i have just finished install on my budget build 2 svc 4ohm 12s picked up for 50 each built box enclosed before I knew anything picked up amp from Wal-Mart 1000 wat 4 channel jensen and ran into few probs was so mad 😠 was bout to give up then started watching some your videos and realized I had factory head unit but was using rca low input when i needed high was blowing fuses nightmare all figured out now so im hooked gonna stay with this set up till I can do these big upgrades still alot to learn so keep them videos coming thanks man great job
I may have missed it but oms it’s something everyone should know about also
Best explanation in the world thanks for your time and knowledge
Awesome, GREAT info to help me choose system components
This is really great information! Thank you!
Good stuff! The car audio dictionary.
@CarAudioFabrication
5 жыл бұрын
Glad you enjoyed, I know a video like this would have helped me immensely when I got started, so figured I would try to help you guys out!
@davoupnya3202
4 жыл бұрын
@@CarAudioFabrication Your a good man Mark, and thank you for all you do for all of us !
Man I’m glad you exist! Lol I was finally able to explain to my lady on the terms of audio! She’s was always asking and I really just couldn’t explain into detail on what the terms were and into detail ! Thanks for helping me and possibly everyone else!
Thanks very much Mark, for this great sharing. I just know and understand that DSP is a must component for audio system. From this video, I explore more about the DSP, and now I can tune my after market radio unit and amplifier to sound like the factory built in audio system :) Great thanks for this fruitful sharing :-)
Hertz was definitely the cutest term on this list
Cool dog. Hertz is also a speaker brand. I'm a retired electronic technician so I understand all these terms but I do occasionally come across something I hadn't heard before. It's interesting some vendors don't recommend a crossover for component systems - probably because the tweeters come with an inline non-polarized electrolytic capacitor whose capacitive reactance increases as the audio frequency lowers. I wish I still had access to all that test equipment you have.
Good info wish you would have explained clipping when you discussed the gain. Been watching a lot of your vids and am about to try fiberglass for the first time
@CarAudioFabrication
5 жыл бұрын
The video I linked goes into that, hopefully those looking for more info will follow to that. :)
You should build a wall sometime! It would be fun to see all these techniques you show us in each of your videos used to build something for SPL 😀
Maybe a video on the quality of speakers and what are good speakers for your application
great video, thanks for spreading the knowledge, wish i would found this channel before i started my car audio upgrade, the professional car audio stores in my city were not the best resource for helping me come up with the best system for my application.
Thanks for making this quick and informative.
Amazing tutorial.
Great Video👍🏿 I know im late, it being 2 years old already. Im an amature installer, and when I go to the local sound shop and begin inquiring about these Particular products, I cant seem to get them to go into details like You. because Im wanting More control, planning on going with Focal 3way comps in my Caddy Srx(2014 Premium)for my front stage, Deleting the center stock speaker, and now, realising how the position should be angled, But my Rear stage is a pickle for me, Because of those 2 speakers in my rear decklid. Now, after listening to You, solidified my choice in for my rear doors & decklid & about investing into an A/C DSP. Most importantly, saving me some $ in my build. And intergrate my new Tesla style unit. Thanks!✌🏿
Got the opportunity to see this video early and much more when I became a part of the pateron team, great stuff mark
Well somebody has been attending Dr. Evil's sign language classes.✌"LASER BEAM" ✌ By the way great video...👍
@CarAudioFabrication
5 жыл бұрын
Freaking laser beams!
Awesome video thank you!!!
Good stuff 👏🏻 thanks 🙏
On the back of the head unit there are many abbreviations on the connections go over them and explain their use
Good video !!! well done.
Very useful Video. Thanks for making these videos, I bet many will Serve. Greetings Mark from Mexico
Great info, brotha.. thanks for taking the time to explain these terms.
Thank u for taking time to do this👍 Maybe some specifics on speaker definitions? And maybe u already covered this in a speaker selection video, but Freq response, S/N ratio, or for bass box building Qts, Fs. Bet your sound stage is on point in that car🤘
Grrreat stuff dude!!!! That really helped, I have one question though in modern amplifiers what would be the dangers of hanging them upside down on the roof of an SUV?
Just a thought. I’m sure some people would like to see a video about wiring subs. Going over the different ohm loads how it affects the amp and things like that. Thanks and keep the videos coming
Nicely done Mark!👍👍
I appreciate this info....I like to be prepared so I'm not ripped off. Audio places want to sell equipment more than fixing sound. I'm happy to pay for more labor! Levinson systems should NOT have aftermarket replacements, no?
Great great video Mark!!!! 👍👍👍 It was very helpful for people who are trying to learn about car audio!!! As far as when you talked about the difference between SPL, SQ, and SQL sound systems, for a person to achieve having a SQL sound system what kind of sub's, speakers for the mids and highs, and amplifiers would a person have to use to be able to have that kind of sound system!!! I have only seen people with either SPL or SQ sound systems!!! How would a person be able to distinguish between a SQ vs a SQL sound system when listening to both Mark??? Please explain!!! Once again great video!!! 👌👌👌
Great stuff! I finally understand crossover and hertz ranges. I haven't seen a video yet about cables. What makes a good cable and what should I avoid.
You’ve taught Doug B. Very well 👍🏻
Got some serious equipment in that trunk there! Nice
this was a classic video Mark, thanks
Very good
Great video, I definitely needed that!
Can you make a video on explaining components,coaxial,subwoofers,crossover,bass tube etc and who should pick what and types of setup
...a fellow dog lover... i knew he was a pretty cool dude, but that confirms it... a dog named hertz... VERY cool dude! ...thats awesome... & good job on the vid man... ive heard alot of these terms before, & even had a general grasp of the meaning, but i did not know alot of the technical aspecs behind these terms... thanx bro & god bless u & hertz
Epic info as per usual!
Thanks 🙏
Like? No, love! Awesome video dude! Great info explained very well! Keep up the good work!
Nice job
Should make a video about choosing the right head unit for the type of audio system people use.
Do I need a crossover if I'm installing 3-way coaxial speakers?
I love the way you talk. I wish I talked like you with my voice. Haha
The rms to max always gets me
Love the video only suggestion is maybe in the description list each word in bulletin with or without definitions would be very helpful for a refresh without watching the whole video again.just starting to get into car audio running 2 sav2 12s with a sa3000d on stock doorspeakers and pioneer headunit. Thinking about putting 2 alternators in with capacitor. Any suggestions would be helpful! Looking to upgrade door speakers whenever i have more money and get tweeters with 3 components
So, if I have 75 watt RMS speakers x4, would I need a ~75 watt RMS amp, or a ~300 watt RMS amp?
@CarAudioFabrication
3 жыл бұрын
75 watts per channel aka 300 watt amp
wow!Very professional sharing!
Fuck yeah, Mark! Very well presented. Wish your channel (and KZread) were around back in the day when I was learning all this stuff. You just saved so many people so much time!
Any good batteries you would recommend
great stuff
Great information great videos ....thank you?
Omg thank you so much
Sweet dog dude. Hi Hertz!
Another well done video...stuff like this is why KZread exists.
@amb3cog
5 жыл бұрын
No. KZread exists to make money.
@fishheadH2o
5 жыл бұрын
SO TRUE!
@philb707
5 жыл бұрын
@@amb3cog You so smart
@amb3cog
5 жыл бұрын
@@philb707 Lol Sorry. Couldn't resist. 🤣🤣🤣
Damn dude those fusion audio are dope brahhh!
Hi Mark, can you make a video talking about different configurations of time alignment, thank you from Mexico
Please help me. I have an alpine 600 watt amplifier and two 10 inch kickers. Just the other day the amplifier was blinking red and now that I've regrounded the wire, it's back to normal. Except when I hook my subwoofer the subwoofer shoots up and stays in the up position. Everything is connected right. Any tips? Thank you
@davewood4293
5 жыл бұрын
Sounds like the amp is putting out a DC signal to the sub. That ain't good
Hertz is a nice friend..
If I’m using a 5.25” mid driver of a component set in a 6x9 opening and I want to get the most out of that speaker, what do I need to do? I was thinking of a 6x9 foam baffle filled with poly fill
@thegreatempire3882
5 жыл бұрын
I would like that, but that is not a choice. I hot a Herts Hi Energy HSK 130 and I cannot get a 6.5"
Halfway thru your video and I regret ever looking into wanting to put a sound system in my car
@CarAudioFabrication
3 жыл бұрын
You can just throw some speakers in but don't expect much performance. If you want the best be prepared to do research and design the system correctly.
@frankie7x
3 жыл бұрын
@@CarAudioFabrication it’s not that...I’m a complete beginner. I watched this video to get myself acquainted with industry terms, but just like a professional guitar player giving lessons to a newbie, you go off into these wildly specific and descriptive things when maybe I should watch more videos before looking at yours.
Thanks now i know stuff about speakers😂
Could you explain some advanced stuff like "Depth" as you mentioned in this video? Maybe rear fill, subsonic filter, and bridged.
@CarAudioFabrication
5 жыл бұрын
These would be some other good terms to add. For VERY DETAILED ADVANCED info on crossovers watch this video: kzread.info/dash/bejne/dHh_rrusd9yohrg.html
@steelresilience
5 жыл бұрын
Summing too!
Can you possibly explain what it means when people talk about negative db?
@ryanstewartbell
3 жыл бұрын
When you are recording or editing an audio file on the computer the units are opposite so it goes from negative infinity up to 0. If it gets too loud, it hits -6 or up to 0 then you get peaking and distortion which are the horrible sounds that clip the audio. So when you are recording you want to stay away from that area and have it around -12 and adjust the gain on your recorder so the audio levels don't reach too high
Hey.... Can you tell me what gauge wire is good for high level input from factory radio to amplifier for sending signal from radio to amplifier..
I upgraded my old stock speakers with the new aftermarket speakers for better sound to my stock head-unit radio that has built-in GPS and XM and other apps that I use so don’t wanna change that however, my speakers sounding worse than before. Do u why is that?
I understand you explained the point of crossovers, but do you really need a crossover for a sub woofer and all speakers? Never seen one so curious
Hey man I love your videos especially your budget section. l just watched your T line video and i was thinking could your build a full SQ style car audio setup using things like parts express, dayton audio, maybe even cheap Walmart kickers? If so please explain your choice also probably skip the dsp cus most peoples budgets can't seem to afford one... so maybe a more affordable way to do time alignment. Any thanks for the awesome videos I would really like to hear your opinion one what I would call the High School Setup lol
Could you do a video on ported sealed and free air as I'm planning on putting a sub on parcel shelf to replace stock sub. The qts really important?
what do you think about headrest speakers?
He talked about a 3way, every mans dream.
That dog is so Cute 😍 +1Subscriber!
I got to take a poop and going to watch this as I take a 💩
@JohnDoe-us1ek
5 жыл бұрын
lkjyuiop doing this right now 🤣
Need some cheap but decent 6.5 speakers. My car has 2 sets and 2 flush mounted tweeters with 6x9 in back deck. Its a Harmon Kardon system. Suggestions?
Where is the balancing out the system video?
I need help on a 4 channel amp.i have 6.5 front door component speakers and 6×9 3 ways speakers for rear.my 4 channel amp has a lpf or full range or hpf.which do I set for speakers?and how do I Set Hz for front and rear speakers.?
great quality info, good throughput of information when listening at 2x , I would give you multiple likes if I could.
So would an average 6.5 inch door speaker be the same as a mid range speaker?