Download my free guide, 6 Secrets to Instantly Stunning Sunsets Shots. Great if you are looking to take some spectacular sunset photos. www.photographyin123.com/6-secrets-to-sunsets-1/

@holdercomm

5 жыл бұрын

i have the same camera but in M mode get ISO and Aperture rather than shutter speed ...

@user-zt2sg8kd3w

Жыл бұрын

HI, THIS WEBSITE LINK IS OBSOLETE, DO YOU HAVE THE SUNSET GUIDE ELSEWHERE?

@user-zt2sg8kd3w

Жыл бұрын

Sorry about caps

You answered my question with your first remark, now that's service. Thank you!

Thank you for this. I am in a class and have to understand these settings. You've made it much clearer. Thank you.

You are a blessing. 5d mark I came today and i couldn’t change the aperture in Manual, only because I didn’t know that the 3rd option on the on/off switch controlled that. Thank you!

@PhotographyIn123

6 жыл бұрын

Your comment is the main reason I started making these videos. So glad it helped!! Let me know what other things you want to learn about. Terrance

@diladmazmi4921

5 жыл бұрын

i still cant change it in 3rd on mode, what should i do

Just got an mkii. I grew up using canon then switched to an analog contax to then a Sony a7 series. To now owning my first 5d mkii after about 10 years of not using canon. Your video helped me figure out the “on - on” switch. Thank you!

I just bought the original 5d on an Ebay auction, and couldn't figure out how to adjust the aperture and shutter speed together. You explained everything perfectly, thank you!

This is very helpful! Thank you! This is a really really good explanation!

Thanks so much for this tutorial! Really cleared up a whole lot of confusion for me. Greatly appreciated!🙏🏽✨

Great video. Very useful information throughout. Thank you.

I'm trying to switch over from an SLR to digital and was so confused when I picked up my rental this morning. This helped clear up the basics a ton, thanks! Very clear and I like that it was short. The manuals are so dense and hard to pinpoint exactly what you need.

its really help me thanks for this video

You are the only person that explained this video very well :) thank you!!

Great tutorial, you helped me a lot!

This video was so helpful, thank you so much

Very Helpful thank you very much I am taking a $1,000 photography course and youve broke it down very simply this is going to help me with my course thank you very much.

Thank you very much, Terence. Good informative tips. Please, could you do one for Canon 5D MK III? Thank you.

Thank you! It really helped me

You mention using the OFF setting on the lock/on/off lever (switch on the Mark iv) under the lower right back wheel, but I think it should be stressed that with it set to "LOCK," it's impossible to control the f/stop & shutter speed settings with the front and top wheels. But you can do so with the "Quick" (Q) menu.

Thank you! How easy! I just upgraded with no manual on my new one and I keep saying it’s like giving an Amish a Lamborghini and saying here have fun! I must have not been wording my searches right, because I have not been able to find a video to help me find what I was looking for until yours. Thank you!

@PhotographyIn123

4 жыл бұрын

Glad it helped!

This was so helpful, thank you!

thanks! this video was great helped a lot!!

very useful, thank you !

here in 2020.... thanks for the great video!!

@hrbrothers0210

4 жыл бұрын

Hello plz support my Chanal

Helped me to understanding more. Thank you.

Awesome mate! Thanks for the help!

To answer Ale Terro's questions, he is correct. On all the DSLR camera systems I've used, the aperture is controlled from the software on the camera itself, NOT on the lens like many older film cameras.

So helpful! Thank you!

Thanks that was very useful. Just being picky : I think it would have been good to also show the effect of depressing the shutter release half way, so that the display will then show the related speed when in you are in aperture priority mode etc.

Simple and nice explanation

thank you!! I watched 2 seconds of this and realized I did not have the camera all the way on and that was why it would not let me adjust my f stop. I thought I broke it. .thank you so much!!!

Thank you so much very useful

Thank U Sir Very informative Very detailed.

Thanks Dear! Was helpful!

Thank you for this

It was very helpful. Thank you

@PhotographyIn123

5 жыл бұрын

So glad it helped!! Terrance

Thanks Marie-Clare. I'm glad it was of use to you. :)

thank you, great help.

You camera is a user friendly for those who always use manual mode. There is easy access to adjust the settings

Good tutorial. ..thanks

Thank you, very informative. :)

Hello, I just bought a used one. I come from using a Canon rt3. Question when I look though the eye view finder, I see my red points but I don't see all around it. It's like a clear circle I can see my subject with my dots. Am I missing something? Any help would be greatly appreciated.

excellent, iv just got a 6d mkii and was wondering how to change my aperture.

@PhotographyIn123

6 жыл бұрын

Glad I was able to help. Thanks for your feedback!

Great video helped me out a lot

For night time wedding with Auto flash what do you recommend

Hi Terrance - is there a reason you didn't touch the ISO in this tutorial? I noticed it was just sitting at 100 the whole time. Thanks :)

Hi! Mine suddenly is not going less than 30 it doesn’t go to the seconds do you know what’s happening?

thank u very much

THANK YOU!!!!

Hi there. My Aperture doesn’t seem to go below 30. In that priority mode. Any advice?

very helpful

how to put 100iso in all settings i got only 200 and after A ,and can not find where to change it

please do a full tutorial of every useful option. very helpful. thank you

@PhotographyIn123

6 жыл бұрын

Great feedback like yours is motivating me to make more time for this. I'm glad to share my knowledge, and thank you.

@sbn415xoxo

6 жыл бұрын

Aleena Iqbal agree

U the best sir thank you for the help

@PhotographyIn123

5 жыл бұрын

Glad I can help!

Post your camera questions and I will try to leave a video response.

@akbaromar2209

5 жыл бұрын

Terrance Roman how set shutter speed to 1/5 1/25 1/250 in Nikon D90

great

Thanks for the tricks i was searching for the aperture and speed but you give me both !! if you can make more for 5D Mark ii i'm takin' ! i subscribed

Very helpful. thanks for not talking to fast.

Good

thx alot sir!!!

@PhotographyIn123

6 жыл бұрын

Glad it helped you!

Very useful content

@PhotographyIn123

6 жыл бұрын

Thanks I appreciate the feedback. More coming once I get my iMac back up and running (video card died).

Thanks dude

@PhotographyIn123

6 жыл бұрын

Glad I could help.

i just bought 5d mark1 and i cant change the f Stops on manual mode only i tried everything what might be the problem?

@PhotographyIn123

5 жыл бұрын

Hi there This could be a simple issue (if it is like my 5DMKII). You probably did not enable the Quick Control Dial. The Quick Control Dial in the large round disc/dial on the back of your camera just above the on/off switch. When in Manual mode, it is used to control the f stops. However, that needs to be enabled to do that. The most common error (of not enabling it) is simple. From the "OFF" position, if you click it to "ON" and only hear one CLICK, it is only ON and not in Quick Control Dial mode. You need to turn the ON button 2 clicks to enable the Quick Control Mode. That would mean moving the ON button setting to align with the little white line that leads up to the dial itself. Very simple, right?! :) Let me know if that was the issue. Terrance

@diladmazmi4921

5 жыл бұрын

@@PhotographyIn123 did that, like in the video, still the same thoe..

@PhotographyIn123

5 жыл бұрын

Hi @@diladmazmi4921 Here is option #2. You may have a Custom Function set that is impacting this. The one I know will do this AF Point Selection method. Here is how I set it on my MkII. Not sure if it is the same on the MkI, but should be similar: - go to menu - scroll over to Custom Functions (should be a Camera icon on the top right side) - select C. Fn III: AutoFocus Drive - Move over to the 3rd setting (or the one called AF Point Selection Method) - enter that and ensure it is get to 0 or Normal It if was set to Quick Control Dial direct, that will disable you Quick Control dial I assume you got the MkI used, so there may be various functions set you may not want. You can also clear all of those. - go to menu - scroll over to Custom Functions (should be a Camera icon on the top right side) - select the last item - Clear all Custom Func. (C. Fn) This will restore all default settings from the factory. Let me know how that worked. Terrance

thanks buddy

@PhotographyIn123

6 жыл бұрын

I’m glad it helped. Thanks for letting me know.

Uploaded: 6 years ago Camera used for the video according to the description: iphone x IPhone X released in: 2017 How?

Am I the only one who thinks Nikon's implementation of this is far superior??

At 1:34 the battery is 3 out of 4, at 5:04 the battery is 2 out of 4. gotta buy a backup battery.

@terryrl

8 жыл бұрын

Backup batteries are a must and I always ensure I have one for my cameras. Good suggestion.

Ma 5D Mark2 fait des photos flou

how to get clear video at 360p on youtube

@PhotographyIn123

6 жыл бұрын

1 year late, but here we go... Don't shot 360p video for KZread. It won't be clear. The current minimum standard (to keep audience retention) is HD quality (so 1080p). However, I suspect that in a few years 4k will be the norm.

Yamvaa yabsibataba bagabithibaaaaaaaaaaaaaa Simba is king

Trasmettete una visione più facile e specifica questo sig non utilizza nemmeno lcd

Nikon is pronounced "nickon" - it is a Japanese word. Otherwise, thanks! :)

@PhotographyIn123

8 жыл бұрын

+Sunnycoast Klips Thanks for the clarification. I was using the common pronunciation in North America.

@moonflow5133

6 жыл бұрын

The common pronunciation in North America is wrong, then.