CANNON DOWNRIGGER INSTALL | SEA FOX 228 COMMANDER
Тәжірибелік нұсқаулар және стиль
This video shows how I installed the Cannon uni-troll 10 stx-ts on my Sea Fox 228 Commander. This turned out to be a bigger project than I anticipated, but well worth it because it put me on my biggest Mahi so far!
Thanks for watching! Don't forget to like, subscribe and hit the bell to be notified when new videos post!
CANNON DOWN-RIGGER SET-UP | UNI-TROLL 10 STX-TS:
⇨ • CANNON DOWN-RIGGER SET...
CATCHING MAHI USING THIS DOWN-RIGGER:
⇨ • PERSONAL BEST MAHI | F...
⇩ Purchase the same gear I use in this video here ⇩
New Uni-Troll 10 STX-ts Tournament Series Manual Downrigger Cannon Downriggers 1901140 Uni-Troll 10 STX-TS w/ 24"-53" Adj. SS Boom & Swivel Mt. ⇨ amzn.to/3CnhXRY
Seachoice Mounted Boat Plate Cover, Arctic White Finish, Up to 4 in. ⇨ amzn.to/3wA30sL
Permatex 77134 Nickel Anti-Seize Lubricant, 0.5 oz Tube
⇨ amzn.to/3Jo5sdu
Amazon affiliate links don't cost you anything extra and help to support the channel. Thank you!
Follow me here:
Instagram: / reel_life_fisherman
Twitter: / reellifefishin
Facebook: / reel-life-fisherman-20...
Filmed and edited by Noctem Productions www.noctemproductions.com/
Пікірлер: 19
Nice to see you back. Your videos are very helpful.
@ReelLifeFisherman
Жыл бұрын
Thanks i really do appreciate that! Glad to be back and I’ll be putting up a lot more videos soon! Thanks for watching the channel!
great how to and nice install! good to see you back on YT!
@ReelLifeFisherman
Жыл бұрын
Thanks I appreciate it! Glad to be posting videos again! A lot has happened in this last year! We have a bunch of content to put out real soon ! Thanks for watching the channel!
Great video!
@ReelLifeFisherman
Жыл бұрын
Thanks I appreciate you watching and commenting!
I do two things different the times i haved mounted Cannons on my boats. If you turn the baseplase 90 degrees the litle handle for rotateting the dowrigger, dosnt stick inside the boat. And i cut of about 10 inches of each section of the boom, because i have never had the use for the long booms. Its nicer for me to get the weight a litle closer to the boat.
@ReelLifeFisherman
Жыл бұрын
I have seen guys turn the handle.. but it’s never bothered me having it facing in the boat. I never extended the boom either.. only used to do it a little for Kokanee or trout trolling on my old boat.. but I’m sure I won’t ever extend it here in Florida. I am about to make a video of swapping out the cable for braid.. mine is manual so no need to worry about the auto up feature.. the cable is already messed up! Thanks for watching and commenting! Always appreciated!
@csranch2000
Жыл бұрын
@@ReelLifeFisherman I will be waiting for that video as I want to change my wire to braid on my sporttroll downriggers by cannon
I was waiting till end to see if you were going to tug on it and say "that ain't going anywhere" 🤣 I think my 10 year old son could barefoot ski on it though. 🤣
@ReelLifeFisherman
Жыл бұрын
🤣 You have to give it the old tug test every time! Seriously someone smaller could barefoot ski off it! 🤣 thanks for watching and commenting! Always appreciated!
now you can put a speaker in the back 😂😂
@ReelLifeFisherman
Жыл бұрын
🤣 I thought that too! Maybe I will! The stereo is getting a big upgrade soon! I have 2 amps and a sub going in! For those long runs and sandbar party days! Thanks for watching and commenting! Always appreciated!
Great job! What about the wiring? I have a Tidewater. Mechanical installation would be much like this. I wonder how I get wiring from center console batteries to the gunnal. I could not see your wires. Thank you.
Can you do a video on the best way to mount a downrigger on a sun tracker fishing barge.
@ReelLifeFisherman
Жыл бұрын
So the best way I’ve seen is kinda hard to describe but I’ll try my best! You will need to have someone who can weld aluminum.. use either round or square stock aluminum and you will need flat aluminum as well. You will make a flat mount plate and bolt it though the floor. The the round or square stock up to the top of the railing. Then another flat plate welded to the stock and also bolted through the railing but on that pice on top is where you mount the base for the down rigger . I hope that makes sense .. I wish I could draw it out for you it would make more sense ..
big upgrade from Lodi to Florida...
@ReelLifeFisherman
Жыл бұрын
I was in the Sacramento area before but yes! Its a big upgrade I’d say! Very different lifestyle out here! Still getting used to it! I do miss my family and friends and our fishing back in Northern California but I’m learning more about the fisheries out here every time I go out! Thanks for watching the channel I really appreciate it!
How’s the down rigger holding up?