I just realized that most chemistry videos are technically "reaction vids".

@benrex7775

3 жыл бұрын

XD

@nukeape3213

3 жыл бұрын

That joke made you officially a dad.

@elisabethbrecheisen7793

3 жыл бұрын

That’s awful!! Take my like

@hib7295

3 жыл бұрын

that's the biggest mind frick i ever had to deal with-

@FourScoreSevenYearsAgo

3 жыл бұрын

God damnit I actually laughed at a dad joke

Question: Where does one purchase a friend with a fully-equipped science lab in his back yard?

@kayciedonathan2297

3 жыл бұрын

Alabama

@sekritdokumint9326

2 жыл бұрын

Canada

@notinsane4165

2 жыл бұрын

Depends on how legal you want the "lab".

@cockmaster314

2 жыл бұрын

Andrew’s basement

@aliceplays5092

2 жыл бұрын

The dark web

“Opal comes in a few flavors.” Finally…. Someone else who has a taste for gemstones 😂

@RobertLee337CancelProof

Жыл бұрын

Sounds like synesthesia to me

@itsgonnabeanaurfromme

Жыл бұрын

@@RobertLee337CancelProof it was a joke.

@tropezando

Жыл бұрын

*crunching on chalk* eh?

@dontworry4945

Жыл бұрын

I said almost the exact same thing. Finally. A professional.

@One_Piece_Lover1111

Жыл бұрын

BrO.....sTaPh

I know this video is very old and someone else might have given you the secret. But to avoid that vertical banding in synthetic opals. When you dry it over months you want the container to tilt along the vertical axis by around 5-15 degrees over 4-7 days as it settles. You can also have it Roll around the axis slowly over the same time.

@erinkarp

Ай бұрын

That's a really clever idea!

"Opal comes in a few flavors" _F-flavors?_

@psi9899

3 жыл бұрын

Forbidden m&m

@munensuno8792

3 жыл бұрын

@@psi9899 please don't eat the shiny thing

@ryn3872

3 жыл бұрын

Feed

@bradynmcclintock6290

3 жыл бұрын

I was like ummm no one noticed that

@ElveeKaye

3 жыл бұрын

But really, they're all delicious.

Awww, I’m sad...I was really hoping I could do this at home with my KitchenAid mixer and my stove. 😞

@alexgarcia8365

3 жыл бұрын

You can grow Ruby’s

@onnie6431

3 жыл бұрын

@@alexgarcia8365 how

@arielle2745

3 жыл бұрын

@@alexgarcia8365 💖

@opdo8523

3 жыл бұрын

@@onnie6431 night hawking light has a video on it

@finkyfamboni4333

3 жыл бұрын

@@masonhunter2748 what are you even talking about?

Try stabilizing the opals by saturating them with Starbond Thin CA glue instead of epoxy resin. It's generally used with wood but it's water thin and will saturate the opal way better and will leave it with a high gloss finish just like resin. It's completely clear.

What about stabilizing resin? editing to add this info: Stabilizing resin is *designed* to seep into porous things such as wood. Put them into a pressure chamber to help reduce bubbles and hopefully reduce breakage. I believe Peter Brown (since you mentioned him) has used it a small handful of times on his channel.

@lebby1688

Жыл бұрын

I was gonna mention this as well. Especially the pressure pot as opposed to vacuum since it penetrates more.

Next episode: How I made tomato sized diamonds

@ansleylobo8042

3 жыл бұрын

Hey there 'inetza' what is your next project?

@PrinceAlhorian

3 жыл бұрын

Son of tesla getting ideas again. Waiting in suspense for your next vid Integza, stay awesome.

@evanmagill9114

3 жыл бұрын

You have a love-hate relationship with tomatoes, don't you.

@OutOfNamesToChoose

3 жыл бұрын

@@evanmagill9114 As a child, Santa gave him tomatoes if he misbehaved

@takase5037

3 жыл бұрын

time to 3D print your own opal

Thought Emporium, NileRed and Applied Science in a single vide?!?!?! Now this is epic

@volvok7749

3 жыл бұрын

All-star video

@Hailfire08

3 жыл бұрын

Three of my favourite channels in one video :)

@cornonjacob

3 жыл бұрын

Mentions of Peter Brown too! Not the same type of content at all, but still a great content creator

@m.sierra5258

3 жыл бұрын

And SmarterEveryDay

@dildoshwagins2222

3 жыл бұрын

No it’s fate

As a South Australian listening to you pronounce Coober Pedy is murdering my ears but thank you for mentioning us. It’s also pretty tragic that they’ve found fossils here that aren’t worth as much as their opal value so they get destroyed.

@radgamerrach

Жыл бұрын

Yes, Cooper Pedy is pronounced koo-buh pee-dee

@skitterly

7 ай бұрын

Not the fossils 😢

@FloopyNupers

6 ай бұрын

@Kitinelli I thought yall were tough down there. Didn't know words would hurt ya.

@soogynoodle

5 ай бұрын

@@FloopyNupers Brother, what if someone started pronouncing your name absolutely horrid. Pretty sure it would annoy ya a little

@FloopyNupers

5 ай бұрын

@@soogynoodle id laugh

Most the synthetic opals I've found (since I LOVE opal and have been looking this stuff up for years) are usually just held together with resin. You can even find companies that sort their products by % resin.

Me: “Oh I’m gonna try to grow some opals at home cool!” Thought Emporium 4 minutes through the video: “…and all we need is some silicon nano particles.”

@veramae4098

2 жыл бұрын

The prices on the s.n.particles vary wildly.

@jenniferduncan9598

2 жыл бұрын

Me too!

@AshesAshes44

2 жыл бұрын

Making them with polymer clay can be very pretty and takes little time and money. I too, wanted to make some like in this video, though 😕

@jesshasnofilter

2 жыл бұрын

You're a lifesaver

@vvskiitlesvv

Жыл бұрын

you can make fake ones with resin and a sheer iridescent powdered coloring

No way! I spent a long time looking into synthetic opal production some years ago and never was able to uncover the secretive process. I've got an opalized fossil collection myself. Man this is great. Thank you

@whssem4793

3 жыл бұрын

Looking forward to seeing your take on it.

@NickiRusin

3 жыл бұрын

you should do it, I'd love to see your video about it!

@sethswheelhouse

3 жыл бұрын

Now it's your job to figure out how to stop the tiger stripes. Can't be much harder than when you figured out starlight!!

@-NGC-6302-

3 жыл бұрын

Synthetic gems are always interesting

@sasjadevries

3 жыл бұрын

I've found a Russian patent about an inductrial production process for making opals. They let regular quartz grow in an autoclave, and then they heat-treat it to let it develop microcracks, and those microcracks have the same diffraction effects as real opal. So they make a big piece of ordinary quartz, then cut into small pieces. The pieces get covered in sand, and they get slowly heated up to 550°C. They mention 2 methods: 1) slowly heat it up with 10°/hour, keep it at 550° for 4 hours, and they let it cool at 10° per hour; in their testing this gave a failure rate (fractured gems) of 1%. 2) in their high volume runs they let it heat by 60°/hour, keep it at 550° for 15 hours, and let it cool at 60°/h; but that gives failure rates of up to 5%. All the heat-treated gemstones become opalescent+white (even the fractured ones). So *you could try this process yourself with store-bought quartz,* that should work out as far as I can tell... So they used quartz that was grown at 30-32MPa, 300°C in a solution of 7-10% NaCO3 and 0.5-1% NaOH. They say that this is the standard way for industrial quartz production. If you succeed: put the opal into your batman projector, i'm curious to see how that will look.

Have you tried running some soundwaves through the container as it sets its pattern? Maybe the 7.83 hz that is supposed to be the Earth's frequency. It'd be interesting to see if you could dial in different patterns or stacking of the particles.

@user-mb6zc8uj4z

2 жыл бұрын

Man that's interesting. I wonder what would happen.

@ppierson4126

2 жыл бұрын

It would probably mess up the opals shiny construct. Sound is vibration, vibration is constant movement. Like he said the samples sat still for months n the one time he tried motion it turned into a white chunk. So sound probably wouldnt be the way to go but its worth a shot. Maybe some sort of low range sounds possibly.

@ppierson4126

2 жыл бұрын

Also i just thought this, if you put sound directly around with the sample at the center, i can imagine the molecules being pushed away from the walls concentraded to a center, possibly creating an interesting piece of opal.

@shiser59

2 жыл бұрын

​@@ppierson4126Some sort of resonance frequency may well be the "trade secret" to avoiding the characteristic tiger striping...

@ppierson4126

2 жыл бұрын

Someone needs to try it and let me know. Cause the physics off applied heay and pressure arent nor have to be so extreme as most gems to grow. So besides heat n preassure, resonance is the only other idea i have. It may take some trial n error but i can say id deffiniely go for lower frequency. Lower frequency less vibration. High frequency and you got an earth quake turning the mix into that whitw not as pretty rock.

For resins, try Opticon. You actually soak the opal in part A for awhile, then add the hardener to the stone (not the part A). Look at Emerald treatment for hints, but you do cover some of it at the end. Pressure AND Vacuum are more ideal. Warmed part A make penetration better.

@mieruKai

Жыл бұрын

I appreciate this guy actually giving the answer!

"What color is Opal?" "Yes."

@El_bean.er777

3 жыл бұрын

It's considered iridescent

@josephdavison4189

3 жыл бұрын

@@El_bean.er777 r/wooosh

@no.9195

3 жыл бұрын

@@josephdavison4189 r/ihavereddit

@boobgoogler

3 жыл бұрын

Uh oh! Reddit moment!

@no.9195

3 жыл бұрын

@UDG r/ourreddit

I now want to make synthetic opal bathroom tiles.

@dicenia3881

3 жыл бұрын

probably easiest to stick to holographic tiles...

@seditt5146

3 жыл бұрын

Right I am over here thinking If I can modify this to coat ceramic Pottery with it.

@facelessdrone

3 жыл бұрын

I think it would really pretty if the opal was speckled in

@corwinweber693

3 жыл бұрын

I was thinking countertops.

@IncDoge

3 жыл бұрын

🤔 synthetic opal kitchen and bath company comming when?

opal might actually come in useful for data encryption. powdered opal, when shaken, moves around and glitters differently. if taken picture of and encoded into text, it might come in handy as an encryption key, which is the tool needed to encrypt and decrypt information.

@InfestedSlab

Жыл бұрын

I think lava lamps might be enough for now

@ALT0_768

Жыл бұрын

@@InfestedSlab its so random though, and im pretty sure a 10cm2 box of opal powder will do the trick

@AlexaFaie

5 ай бұрын

Just use nail polish in a bottle. Got a topcoat full of iridescent hexagons of different sizes which when you shake/move it changes drastically. Though that one (Wizard Lizard by Colores de Carol) is perhaps a little too heavily packed to get it to change as easily as a less packed one. The base is quite thick. But still, that's easier & cheaper than getting a box of opal powder.

@worksmarter6418

12 күн бұрын

No

You deserve so much praise and recognition for your literal MONTHS of effort and beautiful results. EXCELLENT video, you did a great job!!

"Can you grow opals" Me: Ferb I know what we're going to do today

@Cobalt985

3 жыл бұрын

I was very interested until he started talking about the 10,000 psi thing. I'm still interested, but I guess I won't be able to "just" wait 7 months to get results I want.

@theaccounter

3 жыл бұрын

@Bob Pearce dont keep doing this man, youll get a lot of hate for correcting people

@zerosight8976

3 жыл бұрын

@Bob Pearce Dude, even the guy in the video has said opals. It doesn't matter.

@ollieb393

3 жыл бұрын

Yeees hahaha

@alphariusfuze8089

3 жыл бұрын

*F E R B*

Scientists making synthetic opal: “What are we doing again?” “I dunno but it looks cool.”

@Lizlodude

3 жыл бұрын

I imagine quite a few cool things came out of this process.

@jurieccilliers

3 жыл бұрын

I can see this happening.

@TheHardcoreArtist

3 жыл бұрын

*looks at opal particles* “I haven’t had dippin dots in forever”

@sluvvr

3 жыл бұрын

400

@prizmarvalschi1319

3 жыл бұрын

@Hellequin Maskharat gunpowder what supposed to be the elixir of life The irony of alchemy

You deserve huge credit for your patience in drying , sanding, and spinning. The results were terrific.

I'm gonna say this now. It's always amazing seeing people make synthetic versions of what nature makes naturally. It just goes to show you how much effort we have to put in to make things that are very close approximations of what we all consider "the real thing".

At the start of the video, "ya, I wanna make myself an opal." At the end, "nope not for me" XD

@myldreth14

3 жыл бұрын

same, at first I thought this was gonna be some easy DIY thing

@eveningstar777

3 жыл бұрын

One can hear the words are being spoken in English all the way through the video but after 3 mins my concentration went as if he was talking in tongues! But for those who can pay attention, its brilliant im sure! thumbs up.

@CinnaBomber

3 жыл бұрын

I'm soooo glad it wasn't just me. I thought this was gonna be an ingredient list from walmart kind of DIY, not a "i have an entire professional science lab at my disposal, no big deal" DIY xD

Synthetic opals are extremely popular in the high end glass market. Typically they're encased in a glass which magnifies the stone and makes them even more beautiful. They can also be crushed into dust and inlayed into the glass. It basically looks like the most incredible glitter you've ever seen.

@privatizitat815

3 жыл бұрын

Glitter²

@StallionFernando

2 жыл бұрын

And you can get a cool gold chain with diamond that looks amazing for $20 at walmart as well to go with it.

@laurenspinelli6898

2 жыл бұрын

I want to see this crushed opal in glass SO bad now. What could I google search to find pics of this? Searching 'crushed opal in glass' only leads me to finding Google image results of little baggies of the stuff. But I'm now INFINITELY curious to see this stuff in glasswear now 👀👀

@bring6not12

2 жыл бұрын

synthetic opal is encased in glass to simulste the hardness of real opal, which is akin to glass!

@ptaylor7782

2 жыл бұрын

@@laurenspinelli6898 try searching glassware with opal dust or glass pendant with opal dust :)

I feel like that non-tigerstripe pattern might have a mechanic solution, where during the setteling process the opal is disturbed ever so slightly to knock some of the structure and force it to stack in different ways. Just a theory, of course, but it does seem the most organic to me.

@ejynk

2 жыл бұрын

maybe allowing a thinner disk of opal to settle normally, manually breaking it into the right size grains, and putting it in another tube with the solution would work

@kaniyaru117

2 жыл бұрын

@@ejynk considering how delicate the pellet supposedly is, that might be a little hard to achieve... but possible, none the less

@mwater_moon2865

Жыл бұрын

@@ejynk Or maybe taking some other crystals, like the air dried bits and mixing them in as it settles?

@ejynk

Жыл бұрын

@@mwater_moon2865 yeah. I suppose that might allow it to crystallize but I am neither motivated nor smart enough to recreate this experiment

@agent57

Жыл бұрын

I was wondering about this, or possibly siphoning the solution off after a while and replacing it with another "color" of the solution. Alternately, maybe putting an uneven surface at the bottom of the settling chamber, so they have different planes to stack against?

Thanks for the explanation about muscle cells in meat! I've seen that iridescence many times but I assumed they were salt crystals.

I don’t know, “is a pretty rock” seems good enough for me.

Making gemstones is like modern day alchemy.

@theyoten1613

3 жыл бұрын

Chemistry is the direct descendant of alchemy. If you arrange sand in a particular way it can do math better than you (a chip). Don't tell me that ain't magic.

@arnaudmenard5114

3 жыл бұрын

Science is magic that works reliably.

@migarsormrapophis2755

3 жыл бұрын

What Yoten said. Chemistry is the modern day equivalent of alchemy broadly.

@arucane8635

3 жыл бұрын

@@arnaudmenard5114 I don’t remember who said it but someone sait that there are two types of magic. They are magic we use to describe why something happens(chemistry) and magic that we just believe bc why not(religion)

@topazxy5809

3 жыл бұрын

@@arucane8635 exurb1a

Fun fact: William Lawrence Bragg was born in Adelaide, South Australia. The main reason it's a "fun fact" is that South Australia supplies at least 80% of the world's supply (the rest of Australia supplies maybe 75% of the rest); it's nice to see the South Australian physicist (either him or his father) involved with explaining the gemstone so common to the state.

This is such an old video, but I actually have a piece of lab-grown opal without that pattern! It's wild knowing the process that went behind making it, and even crazier knowing that the process for mine is probably even more complicated.

"...as it can react in your lungs and coat them in silica" Well that sounds like a horrifying way to die.

@UberAlphaSirus

3 жыл бұрын

Your eyes too.

@LeonardGreenpaw

3 жыл бұрын

I will turn myself into living stone!

@marcowen1506

3 жыл бұрын

worse, you don't die you just raise your cancer risk and spend a week coughing up some nasty stuff. I worked with nano silica and you cough bricks if you aren't really careful handling it.

@UwOtt

3 жыл бұрын

@@LeonardGreenpaw Flint Marco.

@Alorand

3 жыл бұрын

But it will look so pretty during the autopsy, so… ...it might be worth it?

"Opal comes in a few flavors" Me: I- My brain: Don't.

@renatoimperatori5289

3 жыл бұрын

do not do it it hurts in the way out talking from personal experience

@tuesdaywithanh

3 жыл бұрын

Put the shiny smooth rocks in your mouth, _right now! Do it!_

@billbrown1335

3 жыл бұрын

🤣😂

@etheridescence

3 жыл бұрын

Oh my God, dude.

@nickdaniels4385

3 жыл бұрын

Please write screenplays. Thank You!

In where I live, opals are called “澳宝”, literally means "gems of Australia".

I recall reading about a process that imitated the natural formation, filtering a silica solution through soil and passing a strong electrical current through it. As I recall, it took several months, so patience was required. Would be fun to experiment with different solutions and processes.

@DrDIYhax

2 жыл бұрын

You got a link or more info ?

"as the inversed opal has way more uses than just; is a pretty rock. Like energy storage, electrodes, etc." He said bored...

scientists: make gemstones for little money the entire jewelry industry: im gonna pretend i didn't see that

@Guru_1092

3 жыл бұрын

@sadi muntakim Yay! Artificial scarcity and inhumane mining practices!

@wesleymays1931

3 жыл бұрын

The thing is, many gemstones (especially diamond) are a lot cheaper to get out of the earth than you end up paying for them. Because clearly "high quality" means it came from a f**king hole in the ground!

@wesleymays1931

3 жыл бұрын

@sadi muntakim Exactly. I was being sarcastic earlier, mentioning "higher quality" since people (unfortunately) can't seem to escape this "natural is better" mentality. The funny part is, I've seen a few ads for various diamond retailers, and the thing they're *mocking* with lab-grown diamonds is their size. The fact that people supposedly wouldn't accept this precious gemstone, just because they can't brag about "their amazing boyfriend" or some nonsense like that by simply wearing it near other people, really says a lot about advertising, and about people in general. That they only consider themselves valued or important when they have something that they *clearly* didn't actually get themselves, the product of a relationship which will most likely violently implode within a few years.

@cosmicjenny4508

3 жыл бұрын

@sadi muntakim Gotta throw out the whole system that allows that to happen.

@y8fpe

3 жыл бұрын

@sadi muntakim yep, and diamond sellers have huge reserves of diamonds that they bleed into the market very slowly in order to not affect the price.

perhaps the best stabilizer may be a heat activated wood stabilizer. These are made for penetration and are low viscosity. However, the principle of vacuum stabilization presupposes that there are air pockets in the material which will be evacuated by inducing a vacuum. When the vacuum is released the stabilization fluid penetrates into these voids which previously held air. I suspect there will be minimal penetration into an opal pellet which holds no fractures or voids (aka centrifuge sample). Other ways of stabilization may involve the introduction of trace amounts of aluminum after the microspheres have formed and just before centrifugation. A kaolite clay solution could be centrifuged beforehand with the wet-but-decanted pellet left in place and the opal microsphere solution carefully layered on top before it is centrifuged. This may provide trace aluminum and magnesium as well as yield a flat pellet rather than a pointed one because the nose of the tube was prefilled. Final suggestion? Place the pellet in the center of a ball of clay, wrap that in a layer of cotton and place the whole of it in a ziplock bag and forget about it for a year. This will allow for very, very slow migration of water out of the opal as the ball loses water through the plastic. This is an old trick for high water content opal that crazes after being taken from the ground.

opals are my favorite stones, and I miss wearing opal jewelry so much. I 've always wanted to try making my own opals and bismuth, but I don't have the room to make a proper setup for either. This is awesome!!!!

"Cactus Juice" resin should solve your problem. Its a low viscosity, thermally set, resin which is generally used for stabilising wood. Lots of tutorials on how to use it online. I've used it before and it works fantastically.

@Katgirldiamond

3 жыл бұрын

Ooo i hope he sees this! Resin is such a odd beast

@minivanracer

3 жыл бұрын

I was coming into the comments to suggest the same

@stamasd8500

3 жыл бұрын

I second the Cactus Juice suggestion.

@Kuumin

3 жыл бұрын

It's the juiciest

@senbebe3320

3 жыл бұрын

Bahaha avatar reference?

Opals: *"I'm NOT liKe thE oTher GemS."*

@josephdavison4189

3 жыл бұрын

I can’t tell if this is a Steven universe reference or not, probably because I avoid the show

@kitkatty52211

3 жыл бұрын

@@josephdavison4189 you know the "not like other girls" memes? Yeah.

@reikatheglaceon4426

3 жыл бұрын

I have ***Snake Arms***

@opalyon

3 жыл бұрын

yes

@dacianbuzlea

3 жыл бұрын

@Sturza Vadim Except it's not a lie 🤫😃

OMG! THANK YOU! You have just answered a lifelong question I’ve wondered about since I was little. The iridescence of turkey lunch meat. I just figured they were adding a hint of gasoline or some other sketchy chemicals. What a relief.

One thing you want to try is stabilizing resin. Peter brown used it a few times to stabilize bread. It's a very thin resin that is heat set, so you place the porous object you want to make hard into the stabilizing resin, and then draw a vacuum to extract as much air as possible. Then under atmospheric pressure the resin is forced into the voids of the product, which is baked to cure the resin. It may be possible to place the uncured object into a pressure chamber which is then heated, to further drive penetration of the resin before curing.

Man, between the synthetic rubies and this, I *so* want to start making gemstone dice. They'd look so cool and would probably sell for a lot

@chauniqueogarro

3 жыл бұрын

I would also like to see them, if you ever make them.

@melimel9265

3 жыл бұрын

Use resin. It can look so real. Commented in beginning of vid. Oops I think he's about to use resin. Lol

@Happypheat

3 жыл бұрын

they do lol. unless getting fancy schmansy, most people spend 15-20 bucks on a set of dice. well done stone die are about that price for a single 18mm D20

@AJ-sp7xd

3 жыл бұрын

First thing is dont post that for ppl to steal your idea

@vladamirkalashnikov3704

3 жыл бұрын

Add me to the mailing list, please

I love it when all the science guys help each other, it's just so wholesome and amazing!

@LoloThomas

2 жыл бұрын

sounds like "random science avengers" to me

@limitlessenergy3692

Жыл бұрын

it only takes not listening to the 'finance guy' and the 'politician'. coming from a real science guy lol

@alwaysathome

Жыл бұрын

@@LoloThomas science avengers, that was genius.

@RobertLee337CancelProof

Жыл бұрын

Agreed, wouldn't the world be so much better if everybody collaborated for a better shared understanding instead of competed for worthless paper rectangles and all of the unpleasant shared side effects that comes from that? How can we bring about the conditions that lead to the Handover of societal Norms to the scientists instead of the parasitical politicians money Junkies power mongers and megalimaniacomaniacs with aspirations of world domination without having to go full out 12 Monkeys?

I hope you revisit this one day. I'd love to see you make more opals and other gems.

This is such a good and well done video. I watched this ages ago, yet I'm here watching it again today. Fascinating stuff for sure.

20:20 Hey! Resin artist here hope I'm not too late! So to stabilize a piece of opal in resin you may want to invest in a pressure pot to force the resin into the pours of the stone. If it can take the pressure this process with two part epoxy may be your best bet! Or for the UV resin you have- if the atone can't withstand the pressure pot; try soaking the opal overnight in UV resin in a dark black room then cure the next day. That way the thicker resin has time to become a puzzle piece. *** Third option is catalyst epoxy. It creates its own heat while curing so I'm not sure how it will work for you. It's a very thin resin and has a quick curing time. But it could be a good experiment! Loved the video and hope this helps ✌

@samb5963

2 жыл бұрын

Amazing, thanks for sharing!

@capatainnemo

2 жыл бұрын

that would crack the opal

@seanwarren9357

Жыл бұрын

😎👍

@joshuawargo6446

Жыл бұрын

love it .....also always caeful with catalyst epoxys...not a resin artist but construction worker...andyou have to know material tolerances and how it will react TO the reaction taking place on it....either way great tips....gonna save these for later 👍

@donna8168

Жыл бұрын

I am a resin artist also, and I use Liquids Diamonds, it's so thin. It's by The Epoxy Resin Store (don't forget the word "The" or you end up someplace different), I've never seen a resin so thin before and because of that so few bubbles in the end. But I have to wait for it to thicken for my wall art pieces.

I’ve gone opal mining at Lightning Ridge and pulling these beauties out of the ground and into the sunlight is unparalleled!

@outnode366

3 жыл бұрын

Best in the world from there.

I know it's a little late but if you do more with this look up how turquoise is sealed. What is used for turquoise would probably work. Also there are many types of resin and epoxys available in woodworking and the boat stuff to look at. I think the turquoise sealer is the best option.

Stabilizing resin could work. It doesn’t cure until you heat it. It’s very thin and can soak into wood to stabilize it. A brand I see often is cactus juice. Peter brown has used it before lol

How To Make Cheath Opals: First you need 200k equitment and 5k materials and PhD in chemistry and geology Then you can make very cheap opal gems at home, YAY!!

@roberttyrrell2250

3 жыл бұрын

Not true. You'd be amazed at what a cpl guys in back room of a straw hut in India or Thailand can do. They rip off unsuspectingvtourists for $100s/$1000 for pennies. A little cathode tube ( green TV picture tube) a cpl 7 up bottles add handful of graphite pull the glass as it cools= bam ! Fake emeralds w nat looking inclusions & striations. Add a touch of beryllium to quartz in standard pressure cooker, fake morganite/ orange sapphire.

@AB-vc7ox

2 жыл бұрын

Or look up the patents and figure it out from that...

@roberttyrrell2250

2 жыл бұрын

@Beauty Queen by making a gem you mean cutting a genuine stone? I'm studying gemology to become a gemologist. I'm doing the colored stone course. Not just diamonds. Its tough. We did a lab on treatments synthetics & simulants. Theres so many minerals. This ended up on my feed sparked my intrest. There's more efficient ways than chem composite. IE Flame fusion, diffusion, hydrothermal, etc. I was a nerdy kid.🤓

@Noelciaaa

2 жыл бұрын

You don't need PhD. This stuff has p much all been covered in my bachelor nanotechnology course

@roberttyrrell2250

2 жыл бұрын

@@Noelciaaa Don't even need that. You'd be amazed what 2 guys, propane tank, NO EDU in grass hut can do. Ebay is full of them. Never confuse formal EDU for intelligence.

Now I want to make miniatures out of Opal through an injection mold

@dicenia3881

3 жыл бұрын

you could make some with resin and holographic powder...

@Rotem_S

3 жыл бұрын

Injection molding won't help, you can just use some molds and put in the opalescent water inside them (with a long vertical tube so that there would be enough particles for the whole nold)

this gave me a new appreciation of opal. ive never know it had the colorful properties, and being an October baby i was kind of disappointed as a kid when it looked like milk in rock form, turns out id just never seen it from the right angle

This is so amazing,Nile is such an amazing chemist too

_"Opal comes in a few flavours"_ Be me: *hungry* 👁️👄👁️

@gabriellls1145

3 жыл бұрын

Ngl I think they'd taste really good

@danidarkoxo

3 жыл бұрын

Me not being able to eat bc of strep ;-;

@ruth540

3 жыл бұрын

@@danidarkoxo same here!! I've gotten past the worst part thanks to antibiotics :3 Hope you get better soon

@mango4723

3 жыл бұрын

They look so good...

@MsRizz100

3 жыл бұрын

Fr same it looms delicous

i got super excited but then realized i need to know chemistry....

@meganhoward8820

3 жыл бұрын

Same.... Same...

You are the most entertaining and motivational science teacher I have ever seen. Keep up the astonishing work.

Hey mate would love an update on this, if you still have any samples that have dried out at this point. Also have a suggestion that regarding the drying/resin impregnation. I've been making transparent wood using the peroxide method, bleaching with h2o2, curing under UV lamp to degrade the cromaphores, soaking in toluene to displace water/h2o2 and then vacuum impregnation of thermoset resin. I'm not aware of how fragile the silica structure is in comparison to the balsa wood we used (~1mm thickness) but could you displace the water with toluene or other solvent, then put in a resin bath in a vacuum? even with a relatively thick resin it should impregnate the porus structure.

I thought this said “How to grow an orphan”, got mad at the creator, then laughed at my stupidity...

@mikuenjoyerXD

3 жыл бұрын

Lmao

@gapetheapegod7976

3 жыл бұрын

It isn't difficult to do

@bruhmania7359

3 жыл бұрын

why mad?

@sluvvr

3 жыл бұрын

Lol

@kocknhaah1367

3 жыл бұрын

Your "stupidity" made me giggle out loud, for way too long, in front of many up tight, stressed out, last minute Christmas shoppers... You 'rock'! Thanks!

He spends a day at Nile, and starts to talk like him: sand in lungs: "Which isn't particularly healthy". No hyperboles. Just like Nile.

I love your channel! I would really like it if you made another opal video! I need more opal content!

Checking in, hoping you’ll look more into this again and share more results! I particularly loved this video

2:34 "Jesus Christ, Marie! They're minerals!"

@Zi7ar21

3 жыл бұрын

mistr whit shutnup n jesser

I love how you just casually mentioned you probably made diamond

AND You're Canadian!!! Well, that's a fantastic bonus to an absolutely brilliant video!! Thanks for doing this...it was very interesting!

Thank you, this was a really useful & insightful video. Well made too & a wreath of great advice & help for anyone starting out or interested in the process of synthetic Opal & Opal simulants

@DrDIYhax

Жыл бұрын

hey no way nice to see you here bro :)

If you do end up getting a drying chamber like that I recommend renting some industrial space outside the city and maybe getting an engineer consultant to double check your numbers.

@shadowphyre4746

3 жыл бұрын

Just in case you create a bomb...

@zuthalsoraniz6764

3 жыл бұрын

It might even be worth the money (though tbh I am not sure how expensive that would be, compared to homebuilding it) to pay to have it professionally manufactured. I dunno about you, but for me "not accidentally blowing myself up" has a pretty high value

@edwarddoernberg3428

3 жыл бұрын

@@zuthalsoraniz6764 its not actually hard to make these things reliably safe. a professional engineer and manufacturer could build you a large pressure chamber that is no heavier than it needed to be. has the most convenient access system that is safe and doesn't waste materials or manufacturing time. but it will be expensive and hard to mod a skilled amateur will build a smaller chamber, with thicker walls, just to be on the safe side, getting samples in and out will probably be harder but being so familiar with it it will be easier to modify for other projects.

@RobertSzasz

3 жыл бұрын

Putting it in a hole in the ground is always a good choice.

I've looked at some Russian research, and I've found a simpler method to make Opals. The trick is to grow quartz in an autoclave, and then heat-treat it to let it develop microcracks. Here's a more detailed explanation: The idea is let the quartz grow at 298°C at 30.5MPa in a solution of 1%NaOH and 10%Na2CO3, and it will grow with a speed of 0.4mm per 24 hours. However during a prototype run with smaller quantities, they grew quartz at 326° 32.3MPa, 0.5%NaOH and 7%Na2CO3, with slightly faster growing rates. The big chuck of quartz is then cut into small pieces. The pieces get covered in sand, and they get slowly heated up to 550°C. In the testrun they let it heat up 10° every hour, they kept it at 550° for 4 hours, and they let it cool at 10° per hour; with this process

@p.f.3014

3 жыл бұрын

you can possibly do that with a fairly normal pottery kiln

@sasjadevries

3 жыл бұрын

@@p.f.3014 Yeah! Well, the 2nd part is fairly simple: just bury it in sand and slowly heat up while controlling the temp. We're talking about any sand, and atmospheric pressure. But the process of growing quartz at 30Mpa is a bit trickier, that's 300 times our atmospheric pressure... You're probably better off getting commercially made synthetic quartz, which is not that expensive. But the quartz that you buy, should be made under the conditions that I mentioned.

@michaelnazar9358

10 ай бұрын

.

Ayooooo no way brobi watch him all the time. Im definitely supporting your channel as well. You both need to do a extreme experiment with the knowledge you both know. That would amazing

"Giant woman plays in the backround.."

I love opal, it's so pretty. And I NEVER EVER knew that opal could combine with wood naturally. It's so pretty! 😍

@ingridgilbert4917

2 жыл бұрын

You should check out opalized Yowah nut, the structure is gorgeous.

Oh wow, I got hella confused when I saw NileRed's flasks. Nice to see collaboration. NileRed is one of my favorite chemistry channels.

Completely unrelated but your voice is very calming and helped me fall asleep,, (i have rsv rn and was struggling to fall asleep causee of the meds they have me on)

Some like Ethiopian opal are very interesting; they can exhibit much stronger attraction to water(hydrophane opal) and turn transparent! Some when cleaned and tumbled can even change base colors once clean! Some of my rough opal that was a dirty grayish white ended up a nice goldish orange when cleaned up. Australian opal have a unique green phosphorescence that’s also just AMAZING. The blue fluorescence results in a bright green phosphorescence that can last for several seconds up to a minute or two. It’s interesting to see the process of making a synthetic one, can’t wait to see what gem you make next💎 0:09 perfect examples of rough Ethiopian opal! They could look amazing polished but like you I saved several specimens to keep rough as one even has a plant root fossil! The way to check is to submerge them in water until they become completely transparent, which will reveal the other side of any host rock that the opal formed over. They’ll go back to the translucent/opaque state when allowed to dry in a dark area(not in direct sunlight though! That can cause cracks.) so it’s something to keep in mind as it was such an exciting discovery when I found the fossil in my largest specimen! And yes if it’s not already “crystal” clear I absolutely love opals😂

One idea instead of using a vacuum chamber to pull the air out of the opals (as the opal may be hanging onto the air inside too well for the vacuum to be strong enough to pull it out through the resin) may be to use a pressure pot instead to compress the air inside so the resin can fill in the empty voids. It will still leave you with air in the opal, but it will be crushed down to the point where it probably will be unnoticeable. Another idea which I just got while writing this was to pull the vacuum on the opal first, to pull the air out of it, then add the resin on top of the opal while under vacuum. This may require a device to hold a cup of resin in the chamber and tip it into the cup with the opal remotely. Once you open the chamber with the opal submerged still in liquid resin the resin should be pulled into the opal due to the pressure differential inside the opal compared to the atmosphere. There are definitely thinner resins on the market that will help you in this task as well.

@MGgoose1

3 жыл бұрын

Your first idea with the pressure pot is on a good path. Using a thin resin and the pressure pot may be useful. The second won't work very well. When you are pulling a vacuum on the resin, it doesn't release air trapped inside it. Instead, it is essentially boiling off the VOC's that are in the resin before any of the air can escape. At a later point you may finally be pulling any air within the opal out, which if you are letting the opal/resin cure under vacuum, the resin will have no force pushing/pulling it into the opal. Degassing then re-pressurizing as seen in the video just won't work due to the forces needed to move the resin. He could try stabilizing with cactus juice stabilizer which is much thinner and is used under vacuum, but needs to be baked to cure it.

@tedtrower9260

3 жыл бұрын

Until you release the external pressure and you stone explodes.

@SwitchAndLever

3 жыл бұрын

​@@MGgoose1 I never said you should let it cure under vacuum, that's not a good idea. You should dunk the opal in resin under vacuum but release the vacuum while the resin is still liquid to be pulled into the opal from the pressure differential when releasing the vacuum. As I already pointed out.

@SwitchAndLever

3 жыл бұрын

@@tedtrower9260 No, that's not how that works. Curing resin under pressure to squash air bubbles infinitesimally small does not lead to the resin, or whatever matrix is embedded in the resin, to explode.

@AlexVangelion

3 жыл бұрын

@Switch & Lever: This agrees with my understanding as well. Cure under pressure in order to minimize bubbles and drive (thin) resin into the part. A quick vacuum before curing under pressure may help get rid of large bubbles adhering the surface of the part. @MGoose1: VOCs shouldn't be much of an issue with epoxy resin. Polyester resin has high VOCs.

13:00 holy shit, I was a butcher for a few years and always wondered why the beef knuckles always shined like that. thank you so much.

@benmcreynolds8581

2 жыл бұрын

I've always wondered about it too, looking at roast beef slices. Crazy.

@randominternetperson8464

2 жыл бұрын

@@benmcreynolds8581 ah yes, *R A I N B O W M E A T*

@mercurywiser5214

2 жыл бұрын

Every time I see that pattern of beef I get grossed out 😅

I never understood chemistry in school, so I gave up on it despite having a love for it. But now I'm thinking I might actually be able to understand it with finding this channel! I haven't been happier in a while

@itsgonnabeanaurfromme

Жыл бұрын

So did you end up actually understanding anything or (like most people on these channels) did you just see entertaining videos by actual scientists and think "yes.. science"

So for a video idea, leys make an inverse opal! This is beautiful my friend. I love your videos.

Blue, grey and green eyes are also an example of structural color. Great vid.

@thomastruant8837

3 жыл бұрын

That's cooI didn't know that

@misterbreakit2006

3 жыл бұрын

@@thomastruant8837 www.nature.com/articles/jhg2010126#:~:text=Abstract,the%20classical%20paths%20of%20inheritance.&text=Therefore%2C%20single-nucleotide%20polymorphisms%20in,eye%20color%20of%20an%20individual.

I've always wondered why my ham looks a little gay sometimes.

@charlotterobey1299

3 жыл бұрын

😂😂😂

@chrisakaschulbus4903

3 жыл бұрын

"I've always wondered why my ham looks a little gay sometimes." that correlation explains why i sometimes look like ham

This is so well explained. Thank you!

You need to a type of resin called “cactus juice”. I use it to stabilise wood by putting the wood under the cactus juice and vacuuming all of the air out and releasing the vacuum and all that air is replaced with resin inside the wood stabilising it. It’s super thin and is a heat curing resin so it will easily work for your needs. Just cook it at 93°C for an hour or so and that will work.

I am a certified high pressure vessel welder. I volunteer my time and skills

@BurninGems

3 жыл бұрын

A wessel?

@grendal113

3 жыл бұрын

@@BurninGems an autoclave. Vessel hollow container, especially one used to hold liquid, such as a bowl or cask. A pressure vessel is typically inches thick steel that can contain or resist great atmospheric pressure or hydraulic pressure.

@daraa9553

3 жыл бұрын

You should sell it for sure

@StanHowse

3 жыл бұрын

@@grendal113 He was trolling.. Star-Trek Russian kid "Wessel".

Up until my fiance bought be an opal flower ring, I never gave much thought about their beauty. What is so beautiful about them is that something in nature is this beautiful and captivating and is naturally made by the Earth. It is so cool that it isn't one set color. And it matches absolutely everything you wear because it seems to reflect certain colors more when it is near any color. It really is a captivating stone.

@SUPERTRASH_

2 жыл бұрын

Right?! Nature has so many beautiful Things and probably even Mode we don't even know of. So inspiring

@deandeann1541

2 жыл бұрын

Christa - opal was my favourite stone at one point. Now it is one among many favourites. Watermelon tourmaline, adventurine, mother of pearl, pearl, there are many fascinating optical effects in various minerals - chatoyancy, tiger eye effects, tha many stones that show various forms of asterism, the stones that are different colors in different light, stones that are a different color with reflected vs transmitted light, ctones like Labradorite, pleichroism, etc. - lots of fun, attractice stuff. Opals are one of the most delicate stones, in ancient jewelry that had opals the stone hasusually dried out and crumbled. Pearl is also somewhat delicate but not nearly as delicate as opal. There is a mine out west that is open to the public that is loaded with large, beautiful opals, but they are useless as jewelry as the stones immediately deteriorate if not kept wet - they are mined just for the fun of it.

@Jason-eo5bv

2 жыл бұрын

Check out bismuth crystals

@DaisyDoom

2 жыл бұрын

Thing I like best about mine is even a few years later i still see new things,when I heard you always see something new I was sceptical but 100% the most beautiful natural stone/gemstone I highly recommend to anyone who is interested in minerals or stones you won't regret it even with the price tag lol

@mwater_moon2865

Жыл бұрын

@@deandeann1541 I love how Alexandrite flashes purple or green depending on the lighting you're in. My mom told me when I got an opal ring that I needed to rub it on my face to oil it to keep it from drying out, and I did faithfully, until I found out that most opals (even natural ones) are sealed for use in jewelry these days... But both chemically and physically speaking, pearls are WAY more sensitive, not only will the oils of your skin naturally change their color, but even MAKE UP can damage their luster (by scratching them) But don't take my word for it, just see how an opal vs a pearl react to red wine spilled on them and blotted off right away....

I absolutely love the video, I hope that you keep attempting to Improve the process. My guess for the synthetics would be a matter of pressure, temperature, and possibley vacuum chambering at some point during the process. The last opals you linked without the striations looked very much like a cured resin pucks So there is either an Atmosphere or chemical difference that would cause the opal to creep up on the sides like that

it would be so cool if you offered workshops for this! It would be the perfect gift!

Beginning of the video: Oh it's easy?? I'm gonna try this! End of the video: Screw that, I'll just buy one

bro, this is blowing my mind. I've always wondered why roast beef can be sheen-y.

@serelylyhikari9771

3 жыл бұрын

I thought I was crazy in seeing a rainbow in my meat. XD

@crashburndicoot6940

3 жыл бұрын

I thought I was the only fucking one who actually cared😅

@angeladoll9785

3 жыл бұрын

I'm already bored cuz this is all so over my head but if the answer to the roast beef mystery is solved, I'm gonna hang in there! Always wondered about that😎

@sylvia106

3 жыл бұрын

Yes, roast beef northern lights!

I had some success using opal powder, mixing this with small amounts of art-resin, injecting this mixture via syringe in to a ball of Art-resin ( I used plasticine to make various mold shapes), allowing everything to set, ground glob in to various gem patterns, then sanded from 200 to 10,000 grit to polish. I experimented with various injection styles--lines, swirls, blobs, etc. Shaping of the exterior finish I found was critical in focusing ambient light to blast through the suspended opal concentration to really make the finished product blaze.

Great video! One correction, sintering does not involve melting, although there can be some melting of material during a sintering process, but not with silica, as silica melts around 1700 C (over 3000 F). I also love synthetic gems as they are the true gem material, not an artificial substitute.

I suppose in Canada Nile red is now a kind of a chemical Don Carlione.

@fletcherspillers9904

3 жыл бұрын

Corleone*

@user-cp1pm2nv1p

3 жыл бұрын

@@fletcherspillers9904 yeah, sure

@jamessheppard4372

3 жыл бұрын

its Corleone

@Blewlongmun

3 жыл бұрын

@Alexander Chohan Nile is easily one of the biggest chemistry channels I have no idea what you're talking about

Nilered and you? Holy shit this is my dream.

@uxleumas

3 жыл бұрын

wait there's a super new nile red one?

@TheZenytram

3 жыл бұрын

and applied science.

@EdgarQS

3 жыл бұрын

And even Peter Brown!

glass sticks extremely well to... Silicone... Silicone is used for aquariums, car windows and so forth. So, if you want to glue your dried crystal using not-resin, you can try silicone componds. The cool thing about silicone is that you can dissolve it in acid to thin it out, like bathroom silicone. Perhaps it's not the right idea, although it's a highly controllable viscosity glue.

For a thin resin or adhesive try Starbond Thin consistency- it’s often what lapidary artists use for stabilizing soft stones like turquoise 👍🏻 Thanks for the great video!

me getting stupidly excited over seeing nilered, my favorite chemistry nerd

@clairebertha8102

3 жыл бұрын

Same😅

@hanaaulia.x

3 жыл бұрын

hsghdgsgshhs same lol

@josephdavison4189

3 жыл бұрын

@@hanaaulia.x me too

@WickedPhase

3 жыл бұрын

The greatest crossover of all time

@nsl_black8053

2 жыл бұрын

Relatable

I learned more in this video than an actual chemistry class. You’re an amazing teacher!

@castlehill6717

2 жыл бұрын

So basically what you are saying is that you didn't pay attention in chemistry class.

Fascinating! I've thought about making synthetic gemstones. I had thought opal would be horrendously complex, had thought about building a verneuil furnace for saphire. For pattern You might try making say red, dry it, break it into say 3mm pieces avoiding mixture of sizes so it has low packing density. Then make another color - say green. Before letting the green settle drop in the red pieces. The green should fill in the spaces between red pieces.

I would love to make art with synthetic opals 🥺😍 thank you for not gatekeeping this info 🤍🌈