Cool experimentation showing how simple things can be made in many styles. Rooting for you Tim. Hope the move works itself out and you get back into a shop soon.

I really like the simple ones, but the "squeeze the bottle to open" one is a really cool idea. I would love to see a short or something where you show how it works after some tweaks to get the correct amount of throw.

Can’t wait to see the new workshop in all its glory. Love seeing people fulfilling their passion thru the expertise of their craft. Keep pushing forward Tim!

Nice work, I love how you just use whatever old junk you can find.

It's good to see someone who is well established in the KZread blacksmith realm go back and showcase bottle openers. By the way I prefer both of the cable bottle openers.

The rebar knot just looks cool but the super simple cable one is my favorite.

The big ol donut was amazing. The bolt was my favorite though.

Bolt, Moon and Loop are my 3 favorites. Thanks for sharing 🇨🇦

Love it. The bolt is definitely my favourite!

I liked the papirclip opener and the last round one best, but found all to be very interesting

I'd keychain-carry the paper clip or the loop, I'd also like to see you add or see how these work on cans

That was cool. Didn’t know you could design so many. I like your favorite bottle opener as well 👍🙂

I liked the large round bar forged into a ring with the three dog ears in the center! I like how substantial it is and how it fits in your palm. It's interesting enough to sit out on the counter or workbench when not in use... Have you considered an opener that is shaped like an axe?! Or a blacksmith hammer?

I really like that short little cable one. Small and simple.

I liked the big round one with the three punch marks in it. Looked like it worked really well, too.

I know its a ``Filler Episode´´ but it was very entertaining! Keep it up Tim

Super fun video, love the rebar knot and the 3 dimple donut best!

I like the first cable one and the last one. The bolt is my 3rd favorite.

Forgive my ignorance, what is the stuff you are melting onto the pieces? I assume some kind of oil?

@TimothyDyck

Жыл бұрын

It’s just bees wax. When melted on hot it creates a protective covering to keep the steel from rusting!

I love how the "Moon" opener looks

Love the paperclip and the knot.

The grenade spoon with a little tweaking is a cool idea!

My favorite was the grenade spoon bottle opener.i think it'd worth more R&D

Love the simple bolt one!

Cool idea, and if up to me the moon opener gets my vote as the best.

The cable one is really cool!

I like the bottle opener disguised as a giant paperclip.

Any chance I could get a couple of the shank and a couple of the blacksmith but (dull) sharpen the opposite end of the opener so it could slide under the opener of a aluminum can beverage? Then the opener could open glass and aluminum cans as well!

My #1 priority in a bottle opener is that it leaves as little damage to the cap as possible. It's a big part of what I liked about your first design and why I bought a couple of them. The ones you've put up for sale now don't seem as likely to do this as well but it'd be nice if that was shown a bit. I just like collecting bottle caps I guess :)

@jameshaulenbeek5931

Жыл бұрын

There's one I recieved as a gift a number of years ago - it's a board with a nail in it! It's a piece of reclaimed hickory with a forged nail, not like the cheap pine 2×4 with a 16d nail one's. It works beautifully and doesn't damage the caps.

I dig “the loop” Good look to it and it looks easy to use

Nice job Tim 👍🏻 I like the grab the bottle one, just a little tweak out on the handle and I reckon it'll be gr8 🍻😎👍

Those are all cool bottle openers except for the solid around one 😜

I really want to see that grab the bottle one work, and I’d buy the paper clip one for certain

Came for the blacksmithing. Stayed for the socks

I like the bolt, bloody great design, gonna have to make one,👍

An awesome idea. That crescent one is probably my favorite across the set.

Love the simplicity of the old bolt. That one for me.

Nice video Tim! super cool to see you doing some chill hand forging, your talent as an artist and craftsman really shines! Love your work man, keep it up!

The moon and the paperclip are probably the contest looking. That shoehorn looking one is badass too with a little tweaking. But I'm gonna side with you. Classic is always preferred.

Great Video! Keep em coming!

The super chunky 3 part round palm fittin one, the chunky paperclip, and your fav were top 3 for me. All of them were clever ideas, some would no doubt work very well with very minor tweaking.

YES! He's back with more content. Appreciate your content and work brother.... so relaxing to watch. Always a joy to watch your vids.

Love watching it Tim!

Great to see all the designs. What was the brownish thing you rubbed on some of them?

My favorite is the one where you put it on the bottle and just grab the bottle to open it would be awesome if you can tweak it and make it work I'd buy it

Timothy, you are a mad bottle opener scientist! I love these! Great video man! Oh and my fav is the circle with the projections in the middle. That thing is great! But all of them, even the ones that didn't work are works of art to me!

Wauw, very cool challenge! I like the ring shaped, the lever/grab type and the last classic one from round bar. Well done!

Well done! Love making bottle openers!

I would definitely buy the paper clip and the bottle grabber ones.

The loop was my favoritt design 😊

The moon one could be a hit. Lots of crescent moon stuff

love the video as always. I like the paper clip and the knot!

I want the bottle squeezer one that one is my favorite although it does need to have slightly less angle in order to work properly but I love thatone

you should make more of these and sell them for some extra money. cus i know i would buy one and im sure other people would too

I would like to see the shoehorn style after its tweaked. Great job on all of them!

Sounds like a blacksmith challenge!?!? Set some parameters and let the fun begin

Great work as usuall Timmy

I liked the forge welded ring with three notches

Rework the grenade lever bottle opener. I like that one in cable instead of rebar.

The paperclip is soo cool

I like the bolt bottle opener

That was a great experiment. I was skeptical about a few. I love when you can tell what the original item or metal was like the cable ones and the rebar one that needed tweaking. Army SE Oregon

Wonder if you can make a tachical whip bottle opener.

⭐🙂👍 Way to go, Tim! I think the disk needs more of a hook on the bottom. How's the move going Eh?

tim its been a few years now , hows the titanium hammer holding up and whats the damage on it .

I admit, I have some inside information, but... coming in the future there might be some really cool layered stuff coming. If the stars align!

Very cool video, I enjoyed it very mucho !

I loved the paper clip it was one I thought that I would like to make

I like paperclip bottle opener ) 👍👍

Lots of ideas 😃

Stopped at 8:56 befor you tried the different openers - if I've counted correctly, you've used nine different (perfectly fine) bottle openers to make some more ;-) (counting rebar and cable only once) and your openers are much more sophisticated and nicer to watch and use than the original ones great work, I couldn't do it - I would have used the base materials ;-)

bro make a black smithing app for sleep sounds it's very relaxing hearing scorching hot metal vs almost cooled down metal, different strength metals different cook times

@t-botriesit5014

Жыл бұрын

BTW the loop was my favorite

We haven't had a "SMASH that subscribe button!" in a while! I love these designs! They're all really cool! I like the paperclip I think it's kinda funny to have this extra large thing to hold sheets of steel or something together 😄 I love the circle with the Y thing. A lot of these pieces are just so beautiful even just as an art piece! The crescent one too! I honestly laughed at how effective the "grab your beer and it opens for you" piece was 😂 I honestly thought you were making a shoehorn at first! Don't give up on that one! It just needs some adjusting on the spacing for the hook. I love to see that you're still into your craft and you haven't given up! Even if you're not cranking out tons of axes you're still making beautiful works of art and awesome content! Keep it up!

6:00 impressive 👌 chef kisses

What's that brownish thing you seem to be melting on some pieces?

Id buy the knot one or the bolt one tim

Cool Stuff, but as a Male German: Everything with a stable and rigged edge is a bottle opener, even another bottle can be an opener.

Try the 1st one that didnt work but use it the other way

I like the one designed as a bolt the best, where can I buy it?

I always use the edge of a table

Who drank all those in one sitting? Did they float afterwards?

Man I was hoping to get the bolt but I bought “your favorite” before you said it was your favorite lol.

The moon knight one is the best

Uh, Tim I just finished the video, please just make the bolt bottle opener, it might not be as cool as some of the other ones but it's still pretty dang cool. (lil sad to see you in the sun, I know how much harder that must be)

Hey Tim Amazing resourcefulness, just worried that the move has caused you drink 12 bottles at the same time! I think I like your second favourite the best.

Nice viedo and i have a question. When do the hammer come back in the shop? Im loking forward to buy 1

@TimothyDyck

Жыл бұрын

Glad to hear it. Another batch hopefully coming this fall!

Very nice video 😊

Yes, of course you can.

Smashed the 👍👍👍

I've been trying to watch this video for a couple of days now, and for some reason, it just won't load. Cleared cache and everything. It's the only video I've clicked on in my subscriptions and from the main page that doesn't load for some reason. Just thought I'd let you know something may be up? but I don't know for sure.

@TimothyDyck

Жыл бұрын

Really! Thats not good! I am so sorry, not sure what I can do to help. :(

keep forge lit.Forge On. god bless.

What are you doing outside?????

Forging in shorts Timothy?!

Uh, miss Martin much ? You needed a video right? Lol. Pretty cool. I like the bolt, it's simple

What is he smiring on the hot metal?

Is this at the new homestead?

@TimothyDyck

Жыл бұрын

👍

@Hooligan__-qy7ru

Жыл бұрын

When do we get to find out where in the country you moved to?

@TimothyDyck

Жыл бұрын

@@Hooligan__-qy7ru This week! :D

I was wondering , did you drink all 12 bottles you opened . 🤣 How is the move going mate hope to see you in the new shop soon . Cheers . 🤠

Sign me up for a paper clip or the loop that was around the same size and shape of the paper clip

Yeee

I see trusses in the background

@MadebyKourmoulis

Жыл бұрын

I spoke to soon. more than trusses back there ha ha.