I love how you don’t have to remove the caliper for the front. That’s a great design for a pad slap. I wish cars were like that. Great video with great angles

@MathieuTechMoto

4 ай бұрын

Thank you ! I wish that the rear brakes we're that easy too

We all know how ridiculously expensive a brake job costs....THANK YOU...WELL DONE

@MathieuTechMoto

4 ай бұрын

Thank you for watching

Professional quality video!!! Extremely well done video and instructions. If someone can’t follow your video, they have no business performing brake work on their Spyder. 💯

@MathieuTechMoto

Жыл бұрын

Thank you for your kind words, i'll try to do more videos like this :)

Thank you for your very easy to understand video. I'm getting ready to do my first brake job on my wife's Spyder and I feel real comfortable with it after watching your video. 👍👍

@MathieuTechMoto

2 жыл бұрын

Yes first time was a little hard , and i could not find any short videos, so i decided to make one, cheers !

Superb video. Excellent angles and great lighting. Thank you for doing this.

@MathieuTechMoto

2 жыл бұрын

Thank you for the feedback :)

Great video with very helpful camera angles. Thanks for the upload

@MathieuTechMoto

3 жыл бұрын

Thank you Glad you enjoyed !

Thank you for the video, just did the fronts on my RT Ltd and it was as easy as you showed. 😊

@MathieuTechMoto

6 ай бұрын

You're welcome :)

Thanks! Shows me what I need to do without a lot of bad camera angles and dialogue. Well done sir!

@MathieuTechMoto

2 ай бұрын

Glad you liked it, thank you !

Just replaced my front pads they came with shims already on them, still a good idea to grease them up a little and the slide pin. Did not take long at all to replace, probably total time about 35 minutes. This guy in this videoprobably did it in less time than me on the fronts.

Awesome video, very detailed no questions on how after watching your video. Thank you Sir.

@MathieuTechMoto

Жыл бұрын

You're welcome :)

Dam what a great video! Great filming and you make it so easy!!!!!

@MathieuTechMoto

5 ай бұрын

Thank you

Great video bro, I have learned much from your video,keep up the video's

@MathieuTechMoto

3 жыл бұрын

Great to hear , thank you for watching and have a beautiful evening ! :)

Thank you! So easy to understand

@MathieuTechMoto

2 жыл бұрын

You're welcome :)

Très belle explications dans un film bien fait, merci

@MathieuTechMoto

2 жыл бұрын

Fait plaisir ;)

Awesome, thank you so much the best I have seen.

@MathieuTechMoto

9 ай бұрын

Glad you enjoyed, have a great day !

Clair, précis et rapide ...! Merci et bravo de France

@MathieuTechMoto

5 ай бұрын

Merci !

Excellent video

@MathieuTechMoto

2 жыл бұрын

Merci :)

I agree, great video. I will use this when the time comes to replace the brakes on my RT Limited. How many miles (or km) did you put on the original brakes?

@MathieuTechMoto

3 жыл бұрын

Thank you, dont know about lifespan that is my fathers Spyder :D

Thanks in advance, don't need pads yet but I always do my own maintenance.

@MathieuTechMoto

2 ай бұрын

Congrats, thanks for watching !

Awesome job

@MathieuTechMoto

2 жыл бұрын

Thank you :)

Thank you for a great vidoe!

@MathieuTechMoto

2 жыл бұрын

Yeah, thanks for watching :)

Well done,thank you !!!

@MathieuTechMoto

Жыл бұрын

Thank for watching :)

Hi I appreciate your fast response on my first comment, but now I have a question. I have a 2017 spyder rts and I followed your video step for step. After completing I pumped the brake pedal and all that. I took the bike out and performed a series of quick stops, but I am getting a clicking or rattling noise coming from the front brakes.The noise gets louder when I step on the brake pedal. Do you have any idea what it might be or what I might have done wrong? Thanks

@MathieuTechMoto

2 жыл бұрын

I would remove the wheels and fully inspect the front brakes, then turn the rotors while applying some brake with your hand to hear what is rattling

AWESOME VIDEO

@MathieuTechMoto

Жыл бұрын

Thank you !

Ty for this video.

@MathieuTechMoto

Жыл бұрын

You're welcome :)

Need to keep an eye on brake fluid when retracting the pistons. Also, the pads didn’t look worn out. Clean and grease the pin so the pads don’t stick.

@MathieuTechMoto

3 жыл бұрын

Thank you for sharing !

thats a great video, have brakes locked on which i suspect is the park brake but want to change the rear pads as well as think the park brakes been dragging for a while ... brakes look to be one of the few uncomplicated jobs on the spyder

@MathieuTechMoto

Ай бұрын

True, a lot of simple things are very time consuming on the spyder

@jeffpiper7430

4 күн бұрын

@@MathieuTechMoto according to the manual u have to disconnect a lot of things , your way is easier and less complicated

@MathieuTechMoto

3 күн бұрын

@@jeffpiper7430 Thank you !

Man you are quick

@MathieuTechMoto

Жыл бұрын

Thanks to the magic of editing :D

Nice share 👍

@MathieuTechMoto

2 жыл бұрын

Thank you !

Hi, do you have any idea where the 2011 Can am Spyder RT mileage sensor is located?

@MathieuTechMoto

2 жыл бұрын

Nope, sorry !

Hi, this may be a dumb question, but will this video apply to a 2017 rt s se6 Thanks in advance

@MathieuTechMoto

2 жыл бұрын

I think the process is the same, did not try on newer spyder's

Mathieu what is the “thing” that you turned clockwise with the long nose for the rear break, is it the piston? Does it come back to its original position when you press on the break pedal? Merci .

@MathieuTechMoto

Жыл бұрын

J'ai utilisé la pince pour visser le piston de l'étrier afin de le rentrer pour accepter les nouvelles plaquettes de frein qui sont plus épaisse Oui il reviendra à sa position en pesant sur la pédale de frein

@albertifergan6506

Жыл бұрын

@@MathieuTechMoto super video, merci bcp pour ta réponse rapide. Je me suis inscrit. P.s. Je présume que le processus est le même pour la 2011?

@MathieuTechMoto

Жыл бұрын

@@albertifergan6506 Il y a de grande chances que oui, merci !

@albertifergan6506

Жыл бұрын

@@MathieuTechMoto okay, merci encore.

Wish you were located near Chicago! Need a good can am Spyder tech !!

@MathieuTechMoto

8 ай бұрын

Thank you for watching , From Québec !

Do I need to remove the cap off the brake fluid so lines don't burst?

@MathieuTechMoto

29 күн бұрын

@@JablonskiV No need for that, the fluid will return to the reservoir, thats why you don't want to full your reservoir when your brakes are worn

The clip that goes under the pin was going the opposite way you installed it. Does it matter?

@MathieuTechMoto

7 ай бұрын

At which time ?

Any idea if these are the same steps for the 2019 f3s as well

@MathieuTechMoto

2 жыл бұрын

Edit: Yes, they seems to be the same You can buy them here : amzn.to/3wgNvqG

@MathieuTechMoto

2 жыл бұрын

This is very likely to be the same steps

@DRex45

2 жыл бұрын

@@MathieuTechMoto appreciate that

Great video. Do you need to bleed the brakes? Thanks

@MathieuTechMoto

Жыл бұрын

Thank you, you dont need to bleed the brakes !

@albertifergan6506

Жыл бұрын

@@MathieuTechMoto merci bcp

Anybody know if the front caliper mounting bolts torq lbs

@MathieuTechMoto

Жыл бұрын

A quick google search : 34 lb/ft www.canamspyderforums.com/threads/here-are-some-touge-settings.21002/

Did this and now I got a brake failure message on the screen. Any way to further review and reset that night?

@JablonskiV

28 күн бұрын

NVM. Update. Pressed the brakes a bunch of times, turned the bike off for 30 minutes. Powered it back up and it’s gone! Thanks again!!!

@MathieuTechMoto

28 күн бұрын

@@JablonskiVThank you for the update, i think it will happen if you give throttle with the rear wheel in the air

@JablonskiV

28 күн бұрын

@@MathieuTechMotoI did start it when it was in the air to pump the brakes. Makes sense! Thanks again!

Thanks a lot for showing me where is the jacking point, but put some silicone grease on the backing plate of the brake pads will help to reduce the noise it might created by the vibration.😄

@MathieuTechMoto

Жыл бұрын

Thanks for the tip !

Can this same procedure be done on a 2020 model???

@MathieuTechMoto

Жыл бұрын

I don't know but probably very similar

Simple proces and w/o too much gabbering! Well Done.

@MathieuTechMoto

Жыл бұрын

Thank you !

EBC brakes only isn't recommended to reuse shims...

@MathieuTechMoto

3 жыл бұрын

Thank you for sharing !

What size torx screw is that anyone

@MathieuTechMoto

2 жыл бұрын

T30 if my memory is good

@rudybergen8975

2 жыл бұрын

Thanks

Does not look anything like front brakes on 2011 . There are two 5/8 bolts and tiny spring clips on back that are impossible to put back on

@MathieuTechMoto

2 жыл бұрын

Thanks for sharing !

@geneb5482

Жыл бұрын

Yes the 2011 is different. I was going to pull mine off but they weren't coming out easy so I got on KZread and here I am

0:44 accurate.

@MathieuTechMoto

Жыл бұрын

lol

Merci , je vais essayer sur mon rotax 990 2008 5 vitesse sûrement c’est dans le même genre

You should never reinstall brake pins without Sil-Glyde or something similar. That is a definite no-no.

@MathieuTechMoto

Жыл бұрын

Thanks for the tip !

I'm betting this tookmyou way more than 7 minutes....

@MathieuTechMoto

Ай бұрын

Always looks easy on video ;)

Not a 2021

@MathieuTechMoto

2 жыл бұрын

Definitely not ,read description