This fire pit is one of a few covered pits that is on the list kzread.infoUgkxAU9pOCSV9Y5JprooHvfxTpOrt4hx8uRM of approved products for Disney Fort Wilderness. The product served its purpose well and provided excellent fires throughout the evening. We were able to open the door and do s'mores, but I had to be careful because the handle was a bit hot on occasions. Additionally, I wish they had replaced some of the standard nuts with lock nuts in some places. We lost the door handle after just a couple of days of usage. Not a deal breaker, just a recommendation. I still give it 5 stars.

It's nice to see power generation videos on KZread that don't lie. Excellent experimentation.

@campingtogether

3 жыл бұрын

Thanks for watching😊

정말 캠핑투게더님의 아이디어는 어디까지인지 대단하십니다~

Man, it keeps getting better! Kudos!

오늘도 대단하게 호기심을 일으키는 동영상이네요 잘보고갑니다

Hay que seguir investigando y probando!!!, Bien por vos!!!

Nice mate, I like it. Ive built a similar thing for a kerosene lantern and an alcohol stove. I had to run the hot side at at least 130 degrees to really get power running. The kero lantern could do it, but I needed a heatsink on the hot side as well to really suck up the heat. Worked out very sweet, light, and a phone charger! One major bit of advice, you use tapped holes on both the heatsink and the mount. TEC’s, ive found, need to be clamped tight. Drill out the hot side, so your pulling the bolts down hard on the sinks. Full wrench hard. Crush them. I also didnt bolt directly to the heatsink, but a bar across it, with the heads out of the path of the heat. Dont want the bolts themselves to conduct heat from your hot to cold side. I also found I needed to ‘bootstrap’ the fans, like you do. I just put a 9v battery (PP3) clip on the fans, so I could clip on a 9V battery. Then another PP3 clip across the TEC’s and charger circuit. Light the lamp, warm it up, attach the battery to the fans. Once everything is up to temp, about 6v, swap the fans from the batterys clip to the TEC. You need a starter battery, but it really was the ‘eureka’ moment for the project. I’d also ditch the swanky LED display USB regulator. I used a very basic single cell LIPO charger with an 18650 holder. Super tolerant of wide input voltages, I tended to get between 4 and 6v, depending on ambient temp and load. And that charged 18650’s fine. Most of my load is geared to those cells, USB charger for my phone n tablet, torch, vape, tent lamps, all 18650’s. Keeps it efficient. To go from TEC voltage > 5v (with LEDs) > battery bank > 5v > usage , lots of loss. TEC voltage > 18650 > usage, really only the battery charging loss there. Unfortunately, I wasn't using high temp TEC’s. My project came from another that used 6 TEC’s as a chiller, and the best price I got was from a pack of 10. so I had 4 for free. What else can I do with these? The kero one still lives, but I killed the rest on an alcohol stove, finding how hard can I run these? About 8v, 6W out, running the fans from the TEC. Then there is that horrible ceramic plink sound, and everything goes to 0. the kero lamp gets about 4w useful power to the batteries. TL;DR Clamp your TEC's tight and isolated, and use direct battery charging. Your going to have a lantern or fire lit anyway, might as well use that heat!

@marioschutrumpf9463

2 жыл бұрын

TEG . No TEC . Por eso no funciona . Debe ser seebeck (TEG ) nunca peltier (TEC) error

멋진 아이디어와 프로젝트네요!! 저도 아이들과 우드스토브 만들기 프로젝트를 시작해봐야 겠습다^^

That was worth a subscription, thanks for sharing!

👍👍👍 Yesterday I made a video of a mini thermoelectric generator on TEP1-142-T300. Your design is very interesting, a little grammatical, Thanks for the good video! 👍👍👍

@mister-robo

4 жыл бұрын

I made a generator on 6 elements connected in series. I managed to reach 1000 mAh of 5 Volt with a load.

@campingtogether

4 жыл бұрын

Hi. Thanks for watching. Check out my latest video of thermoelectric generator.

The genius of the human mind. Shame more people arent as constructive as this! Bravo Sir. Thank you for sharing.

Great idea, the project gets better all the time😀

I like your video because there's zero talking involved. You just show the work & let it speak for itself. Too many annoying ppl on youtube just blabbing.

@campingtogether

4 жыл бұрын

Thanks for your support!

As always you are a great craftsman

실험정신 대단하십니다. ^^

SUPER IDEA . POZDRAWIAM . POLSKA .

you also need thermal grease on the hot side of the chip as well , for the same reason as the cold side of the chip

Love your channel. Great stuff. Great ideas thanks

Brilliant ... your skill is professional level ! thank you for sharing

Love your videos. Never give up trying.

Wow I actually learned something Thanks man🙂

오늘 아침 화목난로를 받고 깜놀했습니다 너무 꼼꼼하게 보내주신데에 연통 보호하라고 에어캡도 새거 보내 주신것 같은데 정성스러움에 감동까지 받았습니다. 하나하나 완벽하게 받았습니다.서비스로 감동서비스 굿입니다. 감사하게 잘쓰겠습니다.. 유투브 100만 가길 진심 바라겠습니다.

@campingtogether

4 жыл бұрын

잘 받으셔서 다행입니다. 장난감이다 생각하시고 야외에서 재미나게 쓰시기 바랍니다. 다시 한 번 말씀드리지만 취침시 사용은 안됩니다. ^^ 감사합니다.

능력자이십니다!....나중에 더좋은 결과있가를 기원합니다.

@campingtogether

4 жыл бұрын

감사합니다. 좀 더 살펴보겠습니다.

Bin gespannt auf den nächsten Teil 👍

Looks like a awsome little wood stove.

Great work and like your continuous improvement

@campingtogether

4 жыл бұрын

Thanks!

THIS IS SO MUCH COOLER THAN I HAD IMAGINED!!!! Great work! if you have some twists in the pipe. like a snake, does that give you more surface area to get heat from before it exists tent?

Try wiring the fans to the input side of the 5v converter instead of the output. The fans will activate at less than 5v and will provide an ever increasing temprature differential for the peltier junctions. They will just work better and better untill they produce 6+v and the converter kicks in and charges your battery bank. Just an option.

@SeeTheWholeTruth

3 жыл бұрын

And Personal computer fans.. are far more efficient than the fan he used :) Even with a variable power switch built in.

@marioschutrumpf9463

2 жыл бұрын

Que no deben ser TEC (Term Electric Cooler) las que hay q instalar son TEG ( TERM ELECTRIC GENERATOR ) efecto seebeck . No peltier

@harrymills2770

Жыл бұрын

@@marioschutrumpf9463 I think it's all the same principle. You can power it to make a cooler or you can use a thermal gradient to generate a current. Whatever the case, I think you could optimize it by using the draft of the fire to draw cold air through or over the cold side of your TEG. You're mainly running that thing in the cold, and the outside air is an endless supply of cool/cold air. Too bad I'm not an engineer, or I would either build one, myself, or know it's a dumb idea. Wait. I can go on thinking what I want, if I don't do or test anything. I can hold on to that idea as long as I please, now! Cool!

you surprise us every time. that is what we need in these difficult times keep your distance and stay safe.👍

화목난로 변신은무제인가요 점점진화 되네요 ㅎㅎ기술좋으시네요 화이팅요

님은 다 계획이 계셨군요. 아름다운 마무리 기대하고 함께 하겠습니다

정말 재미나네요! 한달동안 같혀있는데 선생님 동영상보는게 낛

@campingtogether

4 жыл бұрын

선생님 현지 사정 어떻습니까? 지내시는데 많이 불편하시겠어요..

@cuttestpomeraniansimbafrie2600

4 жыл бұрын

@@campingtogether 여기는 3월 14일부터 전 도시가 Lockdown에 들어갔어요.. 그리고 저번주에 2주더 연장을 해서 4월 말까지.... 식량이나 기타는 문제가 없는데, 집에서 못나오게 하니 개는 오줌을 아무데나 싸고, 와이프는 찡얼 거리고.... 현지 직원들은 계속해서 돈 달라고 하고.... 차라리 별장에 가서 있었을 걸 합니다. 그 와중 아버지는 운동(저랑 100미터 거리에 사심) 운동하신다고 나가셨다가 파출소에 끌려가서...ㅎㅎㅎㅎ Bailout(벌금내고 출소)....... 한국은 그나마 나갈수 있지만 선택해서 나가지 않는 것과, 여기는 강지로 못나오게 하는게 다른 것 같아요. 오늘 자세히 Medical Journal을 보니 Ace 2 Enzyme Blocker 역활을 하는 것보면 걸랴서 진행이 되면 영구적으로 심장과 기타 장기에 손상이 가는 것 같아요... 하여간에 걸리면 안되요... 조심하시고...... 항상 즐겁게 보고 있습니다. 특히 열교환전력 발생기 최고였어요.... 시중에 팔던데 Wood Stove중에 USB차징해주는것.... 항상 건강하새요!

@campingtogether

4 жыл бұрын

Cuttest Pomeranian Simba Friends 많이 불편하시겠지만 어쩔 수 없는 조치이니 만큼 잘 이겨내셔야겠네요. 항상 응원해주셔서 감사합니다. 조만간 영상에서 또 뵙겠습니다. 건강하십시오.

Habe mir das gleich für mein Raketenofen gebaut , bloß mit mehr Elementen. Viel Erfolg noch 😁👌

@davidvolksmund3903

3 жыл бұрын

Hallo Benno, wieviel Ampere lassen sich bei deiner Bauweise mit mehreren Elementen rausholen?

IMHO this CPU coolers using heat pipes should stand upright for best performance. Cool video. Thanks!

정말 대단하십니다-~ 좋아요~

@campingtogether

4 жыл бұрын

감사합니다. ^^

Я тоже тестровал эти Пельте. Эфективность низкая. И ты используешь электричество для вентиляторов чтобы их охладить больше чем они дадут электричества ))) А идея отличная !!

RAWR!!!! I thought you had it!!!!! Keep going, I am sure you can make it work!!

@Al-L.

3 жыл бұрын

Yeah, keep going!

Great work! Keep it up! Now for those module you will want to use a boost converter or a sepic converter. They don't produce as high of a voltage then what they are rated for and also you can buy high temperature one that are rated for more power and 300c but they are expensive one. I made 2 of these as well using repurposed old one. They work to light up an LED but nothing fancy for charging they need a lot of heat. Cheers!

@campingtogether

4 жыл бұрын

Thanks! I will try different way maybe one or two more shots.:D

@bakupcpu

4 жыл бұрын

@@campingtogether if you need help let me know!

I adore your notification m8

Non ti arrendere, sei molto preciso e certamente riuscirai👍👍👍👍👍

@campingtogether

3 жыл бұрын

Guarda il video del prodotto di miglioramento che utilizza il metodo di raffreddamento ad acqua. Grazie.

Amazing video 👍 Thank you ❤️ God bless you and your family ❣️🙏 I'm a new sub 😁

Good video production.

참! 멋지게 사신다.

So what you need to do is stack them. Hot to cold side and run them in parallel. So long as you still have a hot and a cold side they will balance the heat out

ㅋㅋㅋㅋㅋㅋ 좀있음 충전하겠다고 남편이 아주 재밌게 보더라구요 “ 오~ 오~ 오~ 재밌다~~ 오~ 오~ “ 하면서 ㅋㅋㅋㅋ 저는 봐두 모르지만요 😎 화이팅 입니다!!!

@campingtogether

4 жыл бұрын

댓글로 남편분의 리액션이 그대로 전해지는 것 같네요..ㅎㅎ 이게 충전이 딱 됐어야 그림이 완성되는데 너무 아쉽네요..^^ ㅋㅋㅋ 한 두 번 더 시도 해보고 안되면 놓아줘야겠어요.. ㅎㅎ

@yegongday

4 жыл бұрын

캠핑투게더 ㅋㅋㅋㅋㅋㅋㅋㅋ 그림완성은 아쉽지만 화이팅!!!!! 너무너무 재밌다고 합니다 👏👏👏 ㅋㅋㅋㅋㅋ 저는 보면서 대체 모가 재밌는지 ㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋ🙄 존경합니다 ㅋㅋ

Good Upload 👌

I love it bro. I would love a community like that .hunters and gathering mad max sh## .you rock bro..can't wait to bug out .woooooooo

Good stuff.

Great video and that is a very interesting idea. Keep experimenting, we love your projects. Thanks and stay safe.

В СССР выпускали термоэлементы ещё до Великой Отечественной,они тянули ламповый переносной приёмник

Woo thats is expensive project. May it great when winter

Having power is like the cherry on to. I'd be happy with it just being warm. 👍👌👍

겨울철에 쓰면 좋을것 같네요. 눈 뭉쳐다가 냉열판에 넣어두면 펜 돌릴 필요도 없겠어요.

도전정신 만은 인정합니다~~^^

@campingtogether

3 жыл бұрын

고맙습니다😊

오호 발전기였다니 제 상상 그 이상을 생각하시는군요 생각하시는 이상의 성공이 계실거 같습니다. 곳 엄청 멋진 물건이 만들어 지겠네요

@campingtogether

4 жыл бұрын

한 번 만들어 보고 싶었는데 쉽지는 않네요 ^^, 외국분들이 댓글로 링크를 주셨는데요, 이걸 실용화한 제품도 있네요. 앗 ㅎㅎㅎ 일단 충전 되도록 뭔가 더 해봐야겠습니다.

I think thermoelectric elements work better at higher temperature variables. Maybe you can ice the cold side to see if camping in the snow and moving the radiators outside with ice water being pumped into the tent through insulated tubing to a copper heat exchanger on top of the thermoelectric elements would be an improvement. But what would circulate the water? Another need for energy? What about thermally inducing the flow? I see a lot of people doing that to make hot water. No pump, just temperature variables moving the water. One other thing I was thinking, maybe the radiator you're using can be better. The ones you're using are for taking the high temp off processors, supper HOT! I think if you got your temp colder you're going to find better results. I really like the way you think! And you're mechanically inclined enough to do some really nice work!

@vencdee

6 ай бұрын

Using water pipes heatsink away from the stove would be rather better, no noise, no power output problems.

Double les modules Peltier en série et tu doubleras ton voltage . Très intéressant. Si tu développe un modèle 12v ou 24v performant tu vas trouver des clients !! 👍🏻

legal , se aumentar a quantidade de elementos (peltier) gerara mais voltagem ?

겨울에 귤에 많이 나오니 구리판 꼽아서 귤한 500개 연결하는게 더 나을거같아요 까먹으면서 새벽에 이런 놀이는 너무 재미있습니다

Great! 😮 👍

Лайк и Удачи тебе...

the peltier cell, what have you put it towards the heatsink of the cpu? the side that is hot or cold?

Fantastic

I was wondering about using these since taking apart a thermo electric cooler. If you put the unit outside the tent on the pipe and insulated the inside pipe (so more heat was up at top) would the outside air be good enough to not need fans?

@campingtogether

4 жыл бұрын

Great suggestion. I will try various ways. Thanks!

Way cool, nobody else thought of it ...great job!

@campingtogether

4 жыл бұрын

Thanks Scott!

good idea maybe improved with a duct insulated from the outside of the tent. greetings from Argentina

Thank you, sir, for posting your video. I hope you were able to solve the problem to getting the voltage to the target strength, and will be looking through your channel with great interest to find out about it.

Hi I had conducted a similar experiment many years ago with the first cells of Peltier and had had the same problem, in that case I used to cool a refrigerator but the physical principle is the same. Along the two sides ceramic you don't have to create thermal bridges that can heat the "cold" side. The system can be improved using a pressure cooker with a 1 cm thick bottom to work as a cold tank, you can use the steam output tube to pump cold water in the pot and with an additional tube withdraw hot water considering that hot water goes Always upwards the cold tube must send water directly to the bottom where you put the cells. I would put 4, 2 in series, 2 in parallel. An alternative can instead be to position the cells on a thicker floor not connected to the exhaust fumes but on the rear panel of the stove so as to keep the heat away and use a steel heat exchanger, of those that are installed On normal gas boilers. Given the efficiency of Peltier cells in their traditional operation I would use a Stirling generator for this application.

Those are some serious heatsinks.

공냉이 아니라 수냉식으로 바꾸셔서 보일러와 충전기를 함께 사용하시면 좋을것 같슴다ㅎㅎ 짐이 물론....

From a retired Navy electrician that is interesting. A 12 volt 5 amp output would be nice for what I have in mind.

좋은 아이디어네요~~^^

@campingtogether

4 жыл бұрын

생각보다 쉽지는 않네요. ^^

Vera e pura opera ingegneristicha bravo👍👍

@campingtogether

3 жыл бұрын

Grazie! Questo è molto divertente.

Tankou desde Brasil💪💯✔✔🔌

Ciao! 🇮🇪 Beh.. Son passati circa 40 anni quando giocavo con le Peltier. Cmq potevi fare un raffreddamento ad acqua. Sicuramente il risultato era migliore ottenendo il vero potenziale reale a causa dello scambio termico rivelato dal sandwich dei semiconduttori interni alla Peltier. Infatti, più raffreddi il lato freddo in questo caso meglio sarà la risoluzione nella potenza. E questo vale anche per il lato caldo, Se la cella la usi per un eventuale frigo. Nel frigo più raffreddi il lato caldo più precipita la temperatura oltre i 25° sotto zero il lato freddo. Quindi il raffreddamento è estremamente importante per una buona efficienza anche in volt. E dovresti sapere che le celle di Peltier se superano una certa temperatura nel lato caldo, si danneggiano irrimediabilmente. Scusa se mi son permesso qualche suggerimento. Ciao :)

퀄리티가 대단한데요~ 아래 난로 본체에서 올라오는 열기가 방열판에 닿아 효율이 좀 떨어질 수 있으니 기기의 아랫부분에 열차단판을 달아서 올라오는 열기를 막아주면 온도차를 좀 더 멀어지게 할 수 있을 듯 하여 효율이 좀 더 좋아지지 않을까 하는 생각이 듭니다. 만시는 것들이 다 멋집니다~ ㅎㅎㅎ

펠티에소자를 늘리거나 승압을 해주거나 선풍기를 이용해 온도차를 만드는건 배보다 배꼽인 상황이죠

If 2 TEM (Peltier) in series = 3.5 vDC, then 4 of them would be 7 vDC. Looks like 5 TEM in series is what you need. Also, the rising heat from the stove shouldn't be entering into cooling unit/radiator. Interesting experiment. It was fun to watch.

@campingtogether

4 жыл бұрын

Thanks for your idea! I will try do more on this. Stay safe!

Элементы Пеллетье надо напрямую на трубу устанавливать. Мне кажется слишком много тепловых переходов в твоей конструкции, друг. И ещё - я бы добавил экран между горячей и холодной сторонами устройства. Кулеры нагреваются восходящим горячим воздухом от печи. Удачи тебе в экспериментах!

Would you be able to increase performance by having a second set of heatsinks on the inside of the pipe to better capture heat from the stove exhaust?

superb

펠티어소자라는거죠 pc튜닝에 한때 쓰곤했죠 요즘도 팔걸요

Я буду пробовать собирать такой же генератор, но только уже на жидком азоте, отбирая тепло у внешнего пространства.

Why did you remove the coolers fans.?

Is it possible to have a much wider module peltier ?

나도 옜날 해본 일.. 저거 사실상 거의 안된다고 보는게 좋은.. 냉각을 위해 쓰는 전기보다, 충전 전력이 더 안나오는..

드뎌~쏠깃쏠깃한 아이템이 왔군요^^눈호강 했습니다~♬

@campingtogether

4 жыл бұрын

아쉽지만 작동은 하더라구요... 재밌게 보셨다니 감사합니다.

당신은 안드로메다에서 오셨나요? 외계인닷. 대단하십니다.

Buena explicación, había cosas que no sabía,ñ.

have you considered to insulate the heat spreader ? currently it emits radiation to the cooler, so the cooler gets warm, and you have less temperature difference. Can you use the generated power somehow ? i had only 1 thermoelectric element, and judged that i need a looot more to get to higher voltage to use the energy with a step up converter. Mine needs minimum 4.5 v to operate.

역시 혹시 에디슨?? ^^ 대박이세요^^

@campingtogether

4 жыл бұрын

에디슨은 책에서만 봤네요 😊 하고싶었던거 다 해보려구요. 감사합니다

Severel years ago I've did similair progect ,while electricity was off. It was interesting to see , how the 1W LED become more bright , while snow added to the cooling water. Also I can say , that Indigirka stove produce 60 W of electric power .

Awesome 😎

@campingtogether

3 жыл бұрын

Thank you! 감사합니다. ^^

Gut 👍

Сначала снял крепление, а потом такой, блин, надо же башни как то закрепить 😆👍🔥

Great job. but how many amps?

nice video

열전소자는 효율이 낮아서 직렬로 많이 연결해야 그나마 전압이 나옵니다. 난로로 물을 끓여서 그 압력으로 팬이나 발전기를 돌리는게 더 나을겁니다.

뭔지모르겠지만 신기하네요ㅋㅋ 테이프 자를때 칼질 너무 팍팍해서 무섭네요 조심하세요ㅋㅋ 얼마전에 손다친 1인

@campingtogether

4 жыл бұрын

질기더라구요. 잘 안잘려서 팍팍 잘랐네요. 조심하겠습니다.^^

다양한 시도가 보기에 좋네요. 5년전에 열전소자를 팰릿 자동 공급용 전원으로 시도해봤는데 700도 이상 발열하는 본체로도 5V조차 안정적으로 유지하기 어려워 포기한 적이 있습니다. 열전소자의 내열 내구성도 신뢰하기 어려웠는데 그 사이 더 개선된 고온용 소재가 나오지 않았다면 쉽지 않을듯 합니다.

@campingtogether

4 жыл бұрын

감사합니다. 최대 300도용 고온소자를 사용했는데 생각보다 전압이 너무 낮네요.. 개선된 소재가 있는데 좀 더 찾아봐야겠습니다.