Camping Lantern Light LED Solar Lamp - Repair - Modification
Ғылым және технология
Camping Lantern Emergency LED Lamp is cheap and looks OK. But the batteries supplied are it's weak point. So, I modified the circuit to improve it's performance.
my channel on astrology:
/ @jyotishyamu
3.7V 500mAh Lipo Rechargeable Battery
bm-es.com/prod...
LED Solar Emergency Light Bulb Camping Lantern
www.amazon.in/...
1W High Power LED Diodes 3.4V for Spot Flood Light (Pack of 10)
www.amazon.in/...
Electronicspices 1PCS TP4056 Micro USB Type C Mini Plug 5V 1A 18650 Lithium Battery Charging Protection Board
www.amazon.in/...
Electronicspices DC 260V 1.5 A Tactile Tact 2-Pin on-off Push Button Self Locking Switch - Pack of 10
www.amazon.in/...
1 ohm [1Ω 2W], 2 Watt Resistor (Pack of 5)
www.electronco...
Пікірлер: 15
It is so detailed information 👍 Appreciate it 🙏
@ykpstech
3 жыл бұрын
Thank you Mr Giri.
Nice video sir
@ykpstech
3 жыл бұрын
Thank you Abhishek
Yes you're right ! i buyed this one yesterday and yes ,batterie is not good ....3/4 hours of charge and after 15 minutes the light is so low...me also i have to change batterie .
@ykpstech
3 жыл бұрын
Thanks for the confirmation. Best of luck.
Nice video. Can I get or make 6 led panel because 1 smd led is glowing but the rest 5 leds are not glowing ? Tripura.
💖
@ykpstech
3 жыл бұрын
Thank you.
Hello dear prakash.i an in mysore.i have got this camp lantern but the battery is faulty and out of order.the switch is also faulty.can I send it to you by courier.will you service it.
I was hoping the solar is still useful
@ykpstech
2 жыл бұрын
Aha. Not much. Did not try to use it.
Mine encountering blown capacitor.
@ykpstech
3 жыл бұрын
The modification I suggested does not include a capacitor. Are you referring to the original circuit of the Lantern? If the 400V capacity polystyrene capacitor is blowing, it could be a short somewhere. If the electrolytic capacitor is blowing, may be the LEDs have become defective or the wires going to the LEDs are broken. You have to check the circuit - individually make sure all LEDs are OK, make sure there are no broken wires or shorts - etc.
Wast product bro