A man after my own heart. I’ve owned 2 Unimogs, for beekeeping. Built lithium titanate battery banks and have only high school education. We are like brothers who have never met.

@brendontait6968

3 жыл бұрын

Whoa... 2 unimogs! Cheers.

@heartobefelt

3 жыл бұрын

@@brendontait6968 must have big feet and wide hips

Wow that Panasonic cell went from zero to spastic in no time. Never seen a reaction like that.

@notnotalwen4891

17 күн бұрын

Forbidden beyblade

You are not a drop out. You are a craftsman. What craftsmen have done for centuries.

@brendontait6968

3 жыл бұрын

I still dropped out, so technically am! It doesn't concern me in the slightest tho... am glad I did, and should have dropped out sooner! Cheers

"If you ARE stuck in the amp-hour mindset, change it..." 100% THANK YOU!

@graphenepixel8231

3 жыл бұрын

I agree with you.

@DANTHETUBEMAN

2 жыл бұрын

I would just design 25% over my needs and call it good with any battery

@chriskwakernaat2328

2 жыл бұрын

why? it's a good podcast..

As an electrician, I appreciate your engineering skills. I do have a couple of suggestions: Best to use copper bus bars. If not, use tin coated aluminium bus bars. Aluminium oxide, which forms very quickly on bare aluminium, is very resistant to electrical current. The star washers you used may save your bus bars from melting by piercing through the oxide coating and providing a decent (not optimal) connection to the un-oxodized aluminium. Tin coated bus bars are protected from oxidation by the tin. The last option would be to sand the connection areas and use a non-oxidizing electrically conductive grease on the aluminium. This grease can be purchased through most electrical supply houses and many hardware stores. I would also use lockwashers on the studs along with nylock nuts (and no thread-lock compound, but anti-seize compound). When aluminum under compression connections is heated, it will ooze out of the connection. Then when the connection cools, it will contract, leaving a small space between the connection that allows oxides to form. Aluminium wire must be re-tightened every 5 years to accommodate this issue. Copper holds a memory of its shape and will expand back to its original shape instead of oozing out of the connection. The lock-washer will provide compressive force to the connection that will expand to prevent loosening over time, a must on all battery connections. Or better than that, use a bellville washer. It is used to make electrical connections. It is very slightly cone shaped and made of spring steel, so it provides the best expansive connection to make up for thermal expansion and contraction. But they are very expensive. I looked at building a similar system for my home, but went with used Tesla batteries for now. I would assemble them like so: Battery cell---Anti seize compound on stud--Stainless steel nylock nut---Stainless steel flat washer---No Ox grease---copper bussbar---No Ox grease---Stainless steel flat washer--bellville or stainless steel lockwasher---anti-seize compound on stud---then finally, a stainless steel nylock nut. I would use the same system for aluminium bus bars. The nut on both sides of the bus bar is to prevent the stud from putting tension on the cell. All my best to you and your system. You are very correct to look at cost per cycle instead of just cost per kw hour capacity. You will pay more up front, but a lot less in the long run.

@brendontait6968

3 жыл бұрын

Thanks for your comprehensive advice. I didn't use copper because it would likely have cost close to as much as the cells and then have many points of dissimilar metal contact. I appreciate ali can be problematic with the oxide layer. Each point of contact was lightly sanded and had a light coating of grease (not conductive - but have previously found non conductive grease works fairly well). Am hoping the relatively low currents through each connection will mean low stress and a lack of issue (optimism at it's finest). If for eg I'm pulling 3kW, it will be pulling around 15A through each cell connection. Cheers, let me know how your tesla system works out for you.

@leoncryp8182

3 жыл бұрын

What if he used standard copper pluming pipes 15mm diameter 1mm thick? flatten them with hammer = 23mm wide, 2mm thick, is that good enough? they are affordable , seen many people on YT make DIY Battery Terminals out of them, would it work for his applications? in fact I think maybe he could just retro fit his existing busbar (if this current system allows for 24mm length expansion), he just needs to buy 3-4 pipes at 5m long cost around NZ40 (USD28) each on trademe.co.nz

@GoCoyote

3 жыл бұрын

@@leoncryp8182 While it will work, it is not ideal. Copper pipe often uses a slightly different formula than typical copper bar and sheet stock used for electrical in order to maintain stiffness. The process of hammering out the copper tubing can also cause the copper to crystallize. This is the same as if you bend a copper (or steel) wire back and forth enough, the metal will eventually break due to crystallization. This crystallization also creates a very high resistance in the copper. This is why one is required to use stranded copper wire for flexible connections or power cords. I have seen solid conductor building wire catch fire from being misused as extension cord material. Seems like a lot of work, when you could buy the sheet copper online for not much more. The dangers of getting a battery system wrong can be catastrophic.

@leoncryp8182

3 жыл бұрын

@@GoCoyote Thanks for the insight, buying proper copper sheets sounds like the way to go, what if you had a small project and and some pipe lying around, burn copper with a touch? kind of annealing it or something, would that relax and soften up the crystal structures? seen people do that to bend copper and aluminium, heat then bend slightly, heat again and keep bending, gets very nice smooth bends

@GoCoyote

3 жыл бұрын

@@leoncryp8182 I apologize, but that is beyond the basic knowledge that I have. I often tell people that I have a lot of (hopefully) informed opinions, and hopefully, some facts. One my apprenticeship instructors told us that there is no way that we can memorize all of the information we need to know, as knowledge changes all the time. The thing we need to be able to do is know enough to be able to know that you don't know something, and that there are resources to give us that information.

The details were very nice, right down to the preferred bolts. Much appreciated.

Outstanding video! Love that you dropped out of Hugh school and have still managed to educate yourself so well ;)

Never realized there where proper fireworks in my old laptops. Thanx!

@brendontait6968

3 жыл бұрын

No stress

@w0ttheh3ll

3 жыл бұрын

you're probably joking, but be aware that the fumes can be highly toxic and caustic to your lungs.

@ITpanda

3 жыл бұрын

@@w0ttheh3ll Would never intentionally overcharge or expose a battery. Hell, I turn in my prius bad cell for recycling after replacing the bad modules. Thank you for looking out for the less intelligent on the internet though.

@crpth1

2 жыл бұрын

My first and only, lithium battery explosion was some 8 or 10 years ago! On a homemade battery pack! It happened during charging! At that moment I had a cat in a transport box, not even a meter away! It came from the vet shortly before the episode. The transport box, literally saved the animal. Fortunately no physical injuries occur to the cat! But the poor thing was visibly shaken! By having several cells bursting/exploding into flames, in a rather spectacular way! Some parts of the cells hit the ceiling! :-o Also luckily when it happened I was quite close and could react very fast! Throwing the entire unit to the outer deck and into the snow! Which literally saved the house... In fact I had been most of the morning out. It would have been dramatic to say the least! Old wooden house (rented), with carpet floors and wallpaper! You get the picture! In spite of much washing and scrubbing, the wall always testimony the episode! ;-) NEVER underestimate the destruction power of a damaged battery! Cheers

@ITpanda

2 жыл бұрын

@@crpth1 Improper charging setup on cells without protection circuit?

You are doing great work. Thank you for uploading these videos, I am learning new things.. Cheers!

That was a great episode Brendon, thanks very much for sharing your research:D looking forward to more!

@brendontait6968

3 жыл бұрын

Thanks Vik, I enjoy doing things differently to how most people do. Not everything is going to work, but it's a good learning experience.

This was actually the very first of your videos that I've watched and I have to say your presentations are, without a doubt, the very best I've ever seen. For a high-school dropout, you seem to be rather well educated and articulate and master of an astonishing array of skills. By now, I've watched everything you've filmed and published on KZread and am eagerly looking forward to your next piece. Thank you.

@brendontait6968

3 жыл бұрын

Hey Bob... thanks so much for the comments and compliment.

I find coming back and watching the machining in this video to be therapeutic. Excited for your build!

@Levi_Allen

3 жыл бұрын

Have you decided to find a different battery load tester?

@brendontait6968

3 жыл бұрын

Hey Levi... hope you guys are well. Yeah I find watching the machine hypnotic, maybe I'll put some more in my videos. Thanks... yeah I have a few update videos to catch up on, but have been away for a decent trip in the truck and absolutely love it!

@brendontait6968

3 жыл бұрын

Yeah, but it took two more purchases to find one that kinda worked!

@Levi_Allen

3 жыл бұрын

@@brendontait6968 - what did you end up with? I’ve been trying to decide one for testing 18660’s and other small cells

@brendontait6968

3 жыл бұрын

18650s? I use the Opus BT-C3100 for smaller cells. Works well, they can crap out with heavy use. (I've put around 1,000 cells through one) else I've linked the current larger one that I use on my cold testing video.

Your analysis is the most complete and logical I have come across. Thank you, well done!

@brendontait6968

3 жыл бұрын

Thanks!

Lots of good info, much appreciated. Especially the proper value of batteries as rated by power and cycle life.

@brendontait6968

3 жыл бұрын

Thanks - will deff try to get as much info into future videos as I can

Can't wait to see what you've got to show us! Thank you very much for making this content.! I'd really like the solar power solution content you've mentioned. It's a jungle out there. You are really good at explaining things, i understand it with my electronics education from highschool. Thanks please keep them coming!

@brendontait6968

3 жыл бұрын

Cheers lorenzo

Really glad you showed that battery test fire!!

@websterbrauzer8373

3 жыл бұрын

That was awesome ... I had no idea it had that energy

Was heading to bed, came upon this video and saw "yet another battery build" - can watch later. Then you mentioned LTO and I just had to watch it right away. Really impressive build on a chemistry which isn't very well covered. I was even more impressed as I watched on that you did the tests and they actually came out to be 40+. Wasn't expecting that. Good stuff!

@brendontait6968

3 жыл бұрын

Hey, thanks for staying up! Glad you enjoyed

Brendon, the type of guy that challenges the great Will Prowse and shows his calculations! Plus you add the structural components to make it a complete off-the-shelf package. Subbed!

@brendontait6968

3 жыл бұрын

Thanks Jim

@mjmnz

2 жыл бұрын

@@brendontait6968 Hi, great video, thanks for the clear explanation. I’m researching building a small, lightweight electric driven boat and these batteries look more attractive option than 18650’s for so many reasons. Way heavier than petrol of course but I’m sick of the fumes and noise. I live in Ōhope, BoP, NZ so I’m particularly interested in your supply and shipping costs and challenges. Following your link the shipping costs appear to be quite high. What was your experience? On the loctite front, I use the low strength version (222) for this type of application.

@brendontait6968

2 жыл бұрын

Thanks, yeah I was going to do 18650s for the truck, but after looking on some Facebook pages where I've never seen such a large collection of burned down houses in one place I decided to go a different route. Battery freight to NZ is an absolute punish. I still have some for sale if you want to buy from me, flick me a message on insta

@tvbela2023

2 ай бұрын

kzread.info/dash/bejne/m4N2tdp-obu7gcY.html

You read my mind; background and qualifications! Yes. Thank you.

Awesome LTO build, very informative with excellent mechanical considerations for battery cell, thanks for the info on RTE, I was a little concerned and hesitant after watching others!

@brendontait6968

3 жыл бұрын

Thanks David

Ha!! Starts video with, "yeah, no formal training, just muckin' about" - then builds the best engineered battery pack YT has seen, Then corrects misconceptions about LTO battery chemistry. Definitely subscribed, great video, thanks M8!!

@brendontait6968

3 жыл бұрын

haha, thanks Frank

@drcoolit

3 жыл бұрын

Just goes to show you that genius doesn't require a diploma.

@moonolyth

3 жыл бұрын

A Badge and Seals don't always comply with the best Tuna.. Nor Good taste. Sometimes you need to go to the dock where the stuff is pulled from the ocean kudos! Hah!!!

@jimviau327

3 жыл бұрын

Frank Brants , yes, the best argument showing how high school messes up your brain.

@JohnHoranzy

3 жыл бұрын

If he had a diploma he would be doing the same thing as everyone else!

Good job Brendon! Thanks for taking the effort to make this video, it was helpful. I am pondering a battery design for my boat to replace the generator. New Hampshire, USA.

@brendontait6968

3 жыл бұрын

Glad it was helpful!

Awesome video Brendon. Well presented.

I've been looking at incorporating this into my home backup instead of 12v lead acid. Cool use!

Thank you for explaining the importance of using watts vs amps for your power bank/ draw etc. It amazes me how many people are stuck on amps when there are many different power systems.

@brendontait6968

3 жыл бұрын

Hey, no problem, yeah I'm amazed too!

Awesome video! I'm still years away from my LMTV build and this is great information!

@brendontait6968

3 жыл бұрын

Make a start - I'm just piecing it together bit at a time. Have no idea what will work and what won't yet

Holy crap, this guy is amazing! Workmanship and skills are out of this world. Much respect to you, Mr. Tait. Subscribed.

@brendontait6968

2 жыл бұрын

Thanks so much Amo

This is one of the best and well-thought battery packs I have seen.

@brendontait6968

3 жыл бұрын

Thanks for that!

wow, very cool. I'm subscribing to keep up with the results of this.

Woah!! well now I have to go find batteries to puncture! That was amazing LOL

@Krzeszny95

3 жыл бұрын

you might as well stand next to a huge firecracker but you shouldn't

Well done brother and a brilliant build I'm super intrigued with this lithium chemistry and the way you went into detail on the cost, durability, life expectancy was well explained thank you I'm still learning and plan on building my own battery I also have a bus conversion with a 24 volt charging system and have also gone back and forth about 24 volt over 48 volt and with all said it is more cost effective to go with 48 volt because I've heard nothing bad about 48 volt systems and tons of DYI builders say I wish I would have gone with 48 volts that's good enough for me. Anyway thank you for a great video and look forward to more on your builds.

Your home insurance company watching this video like 👀.

I have no idea why your channel popped up, but I'm so glad it did, one of the beat videos I've seen regarding this kind of stuff. Was such a wonderful video to watch.

@brendontait6968

3 жыл бұрын

Hey Kenneth, I'm glad it popped up too! Appreciate it!

Mate, there is a reason you have 'no formal training', you are simply self taught better than any university could do. Thankyou for the education you provide.

@brendontait6968

3 жыл бұрын

Cheers mate

@CD-vb9fi

3 жыл бұрын

bingo... same here... high school dropout, zero college, six figure salary. According to all the debt laden diploma's I should be flipping burgers if I am lucky. If a person wants to learn very little is going to prevent them. I have found my standards for education exceed that or formal education by a significant degree. I am never sending my children to those clowns!

That was a great explanation regarding the LTO battery chemistry. Very informative and fun to watch. I’ve been thinking of ways of making a similar battery pack (48V 22S) but using the LiShen LTO batteries. Your design was so simple, compact, symmetrical and used minimal parts. Excellent work!!

@brendontait6968

2 жыл бұрын

Thanks for that Jamaree

Wow, I really love that build.

Excellent rundown, and great project. Thank you for letting us in on the process

@brendontait6968

3 жыл бұрын

No worries!

Very interesting video, I like that you considered things like expansion etc. I'll be watching for more information especially on charging regimes and bms system.

@brendontait6968

3 жыл бұрын

Thanks, coming soon!

Dude, what a pack, awsome, and one of the best, informative, educational and presented videos ever!! Very many thanks.... hitting the "all" bell was a no brainer...

@brendontait6968

3 жыл бұрын

Thanks Nick

I loved the CNC machining, one of the best youtube videos I have watched, very well done, thanks

@brendontait6968

3 жыл бұрын

Glad you enjoyed it

Perfect length very good watch lots of reasonable information. Thank you for the great insight!

@brendontait6968

3 жыл бұрын

Thanks

Great video thank you, every day is a school day 🤙🏼

Keep up the killer work man this video was amazing! Thank you!

@brendontait6968

3 жыл бұрын

Cheers Brandon

That was incredibly detailed and I am very appreciative thank you very much

I thought I knew something about campervan batteries ... Until I watched this video. Brendon you set the bar high. Thanks for sharing this knowledge

@brendontait6968

3 жыл бұрын

Just scratching the surface, I'll go into more detail on diff batteries in future vids. Glad you took something from the vid =)

what a powerhouse !

Both your practical and technical knowledge are impressive and more importantly to us all, Appreciated! Lost my Bro this year (60 years old), who was accepted to college at 15 and electrical and mechanical wiz. He was my go to for all things related (and truly would appreciated your knowledge and approach), we walked through more of this the past years plus, and appreciate those who (like you) post such information and support such a personal loss of go to knowledge. Thanks! Subscribing.

@brendontait6968

3 жыл бұрын

Cheers David. Sorry to hear about your bro 😞

Amazing video and I love your theory/test/check approach. Those batteries sound great too!

@brendontait6968

Жыл бұрын

Thx

That was great! It reminded me of a 4th of July "Ground Bloom Flower."

@gurgelplus

2 жыл бұрын

Exactly

@cosmicraysshotsintothelight

2 жыл бұрын

Sounded like one too. And it was constructed like one with how the hole made was just off center to the tube shape of the thing. Guaranteed that there was a lot more energy in that spray than there is in one of those cauliflower things. I did not know that they got that angry.

Love your channel and presentation (and the warnings during 'testing' phase) ;-) Not difficult to see you are above average intellect and not afraid to go after what you believe in. Thanks for sharing!

@brendontait6968

3 жыл бұрын

Thanks Sam

@saolelejrsaolele7271

Жыл бұрын

@@brendontait6968 bro are u still in new Zealand?

@brendontait6968

Жыл бұрын

Yup yup

Very informative Brendon thank you. Trying to work out what to use in an offgrid battery for a house in the UK. Never really come across LTO before as most people I talk to are trying to sell me something and LiFePO4 is an easier sell/profit for them selling to people who aren't curious as to choices availible and long term efficeincy and cost.. If possible I prefer to either build whatever I can or at least fully understand how it works, so your video is just perfect. Simple explaination, easy to check up on what you are saying, so thank you. Education is what I do and I enjoyed being educated by your video.. Cheers

I love how after punching the hole in that battery, he didnt talk about nearly shitting his pants.

Holy shit. You're frigging awesome. I'm in WLG, was just about to hit the buy now on Trademe for a 200AH Lithium. Problem for me is the safety, I've had experience of LiPo's catching fire in RC car builds... I'll email tonight.

@mazda2284

3 жыл бұрын

these are insanely safe !

Thanks for being straight forward and to the point and adding no fluff.

@brendontait6968

2 жыл бұрын

Cheers Scott

Good job Brendon ! Congratulations!

The information in this channel is giving me an addiction. #invaluable.

@brendontait6968

3 жыл бұрын

So glad to hear this... thanks!

I have only watched to 6:35 so far but I love how You have allready told me You have no prior qualifications and also demonstrated how your design is based on in depth understanding of physical and chemical properties of the subject matter. I feel like the World missed out when it did not give you a engineering grade and a research job! Wełl done M8.

@brendontait6968

3 жыл бұрын

Thanks... don't forget to watch the rest

Cheers, Brendon. Really enjoyed that. Contemplating my sailboat repower and your informative, well-presented vid has helped me in that journey. Thank you!

@brendontait6968

2 жыл бұрын

Cheers, no problem

Awesome construction. No BS just telling it as it is. Your honesty is so refreshing. Naturally I'm subscribing. Well done.

@brendontait6968

2 жыл бұрын

I appreciate that!

that puncture test was impresssive!!

@brendontait6968

3 жыл бұрын

Right?!

Got 1 minute in and knew I liked this guy... haven’t watched the whole Video yet but something tells me I’m gonna taking this advice. Some people, just have a flair for cutting through the bs. Hard to find these days! Cheers dude

@brendontait6968

3 жыл бұрын

Thanks Jacob... but this battery is kinda new to me so don't trust everything I say!

How did I miss this video! Thanks for the information.

@brendontait6968

2 жыл бұрын

Cheers Paul

Thanks for your hard work to build,test and prove use of this battery is possible. I will seriously consider making up a system for my home as the cost is far less than a Tesla unit and longer life. Kudos to you.

@brendontait6968

3 жыл бұрын

Thanks Kim, It was a big risk as I had previously not had experience with these cells. Am happy with how it is working

Thanks for covering this. It would be interesting to build a 48 volt pack

@brendontait6968

3 жыл бұрын

Might just do that

very informative, Thank you!

@brendontait6968

3 жыл бұрын

thanks for the comment

thanks for that excellent video bro....you're THE MAN when it comes to self built battery packs

@brendontait6968

3 жыл бұрын

Thanks Donald!

0:38 The puncture test totally warrants its own video!

@brendontait6968

Жыл бұрын

Yeah I've deff thought about snipping that out and giving it the attention it deserves!

I really like how you ended the presentation, telling us what you would have done differently. When I saw the RED thread lock, I cringed because of my own experience with the stuff. I have bolts break before it releases. I was thinking to protect from loosening due to vibration, Blue thread lock would do fine. Another issue is the use of aluminum because it does form an insulating oxide layer, but this can be avoided with the use of dielectric grease to minimize the available oxygen.

Great build. I have few of these cells and wondered about how I can package them together and you gave me some few great tips! In general in automotive application, LTOs are not so popular in most builds since kWh per Kg in power density is where these are far behind compared to other Lithium chemistries. I worked with these in City Buses where they may have a short range like 50-80km but have dual charging port to pump in as much amperage (8-10c) in for 5-10 minutes and go another 50-80km - it was pretty sweet to see them work. LTO (Altairnano/Yinlong) is an odd duck that has some interesting applications. They do degrade about 1% a year and also wants to be charged with high amps if you want to them to perform well. Share more about your experience with BMS and other related things. Thanks for sharing. Subscribed!

@brendontait6968

3 жыл бұрын

thanks!

@joyhe-HAKADI

10 ай бұрын

we can provide yinlong lto battery for you if you need

Great video, thanks for sharing

Thank you for sharing some great content! Very informative..you sir, have the mind of an engineer! Wishing you peace and prosperity from Boston...

As someone who studied engineering in university, I am genuinely impressed with your knowledge of engineering principles (expansion/contraction, bending moments, and so on).

@jasongrinnell1986

3 жыл бұрын

Cause he just dropped out of school, not stupid. Society is so misleading.

@waiqiao6875

3 жыл бұрын

@@jasongrinnell1986 Most people who drop out don't have the time or energy to educate themselves to this degree, so it's still pretty surprising and interesting. Worth praising Mr. Tait for.

@ericparent7794

3 жыл бұрын

@@jasongrinnell1986 if my comment made it seem that I am of the opinion that drop outs are stupid, nothing is further from the truth. I dropped out of high school myself, because I was bored with high school classes and frustrated at the slow pace. I simply studied the prerequisites for structural engineering independently and wrote the entrance exam for mature student status. Also, intelligence is, in part, irrelevant in this case as one would still need to spend the time and energy to gain a reasonable comprehension of the aforementioned engineering principles.

@goinginsane37098

3 жыл бұрын

@@waiqiao6875 always depends on that persons passion

@brendontait6968

3 жыл бұрын

Thanks Eric

Holy Sh^T Someone is finally doing it! People have been waiting for this for a lonnnng time!

@brendontait6968

3 жыл бұрын

thanks! am into unique builds, learn so much more than just copying what everyone else does

@Wookey.

3 жыл бұрын

@@brendontait6968 A commendable attitude. Although sometimes other people have just worked out good solutions worth copying.

This is one of the best videos on this subject that I've seen, good information, elegant design... I also recommend reading the description, which contains some complementary information and file links.

@brendontait6968

2 жыл бұрын

Thanks other brother. I need to get off my butt and make more!

Great documentary looking forward to your new build

@brendontait6968

3 жыл бұрын

Thanks 👍

I feel to measure the power then compliance voltage plays a massive part on the measurement accuracy, that's why some measurements at low voltage with say a current shunt & moving iron ammeter in the same circuit might give different readings due to compliance voltage & connection lead resistance, chart recorder to measure terminal voltage & current across a dc shunt with a fancy constant current load would be the answer there are proper units out there but expensive ! Compliance voltage is very important when trying to measure power or one can make mistakes say from a CT transformer using thin long leads to a moving iron meter, Yes very impressive metalwork, cost a massive amount of £$, I would have that sort of power in a brick shed, not in the bedroom for sure, always worried about fire risk, I rather have a purpose built brick shed or metal container, Those batteries are really like a super capacitor. Really nice engineering 👌

That looked awesome the battery dieing

Great job. I had just finished watching Will’s video and then watched yours. Thanks

@brendontait6968

2 жыл бұрын

Thanks Deb, always good to see two perspectives right

Great write up!

Cheers mate ! 🇳🇵

For a highschool drop out you are doing some kick ass engineering!

@brendontait6968

3 жыл бұрын

Thanks - a lot more to come!

@markfisher8943

3 жыл бұрын

Schooling has zero to do with intelligence.

@shadesworks5369

3 жыл бұрын

@@markfisher8943 considering Einstein's third gr teacher said he was too slow to be in her class. His mum kept that stupid letter from him and taught him herself.✌️

I agree with you. Nice build and explanation. Keep it up.

Awesome, lots of good information. Keep up the good work.

wow, I didn't expect that to happen.

I was expecting a DIY build, but wow! You have ALL the best equipment and the brains to make it work. Can I just bring my project to you and write a check? :)

@brendontait6968

2 жыл бұрын

Thanks Michael, I didn't use red locktite - I used an equiv to blue, but am still unsure. Have updated link. Thanks

@Erin-Thor

2 жыл бұрын

@@brendontait6968 - Michael? I think you responded to the wrong comment. 😎

@brendontait6968

2 жыл бұрын

Sorry Erin... I noticed something on my computer getting messed up after I commented on a few comments. I should have refreshed the page before I replied. Thanks for the comment btw. Unfortunately I'm quite time poor at the moment!

@Erin-Thor

2 жыл бұрын

@@brendontait6968 absolutely not a problem, it’s all good!

You built a gorgeous pack there. Very nice; a work of art. :)

@brendontait6968

3 жыл бұрын

Thanks 👍

Excellent! Thank you so much!

Haha first I was amazed by the engineering that went in to your bank so clever, then I was thinking ooh camper van on the beach this guy is brave, then I saw it was a Unimog and hit Subscribe!!!

@brendontait6968

3 жыл бұрын

Haha, thanks! Unimogs deff have their appeal. To coin a phrase tho... owning a Unimog is a bit like having an erection and a migraine at the same time!

@lmp2208

3 жыл бұрын

@@brendontait6968 Don't know where to put your hand ? Hold your forehead or ... ?

@farmerjoe2103

3 жыл бұрын

.....your hard-on ???

@diycampervanman1633

3 жыл бұрын

@@brendontait6968 well that phrase can be wrapped up into one word, viagra!

@PatrickKQ4HBD

3 жыл бұрын

@@brendontait6968 Okay, I'm going to write that one down!

First build I've seen where dude goes all in on yin cells

@marcelbron6128

3 жыл бұрын

must have won the lottery before starting this project ;-)

@PatrickKQ4HBD

3 жыл бұрын

@@marcelbron6128 He said $55 each x 99 = $5,445. That's high, but not unreasonable for a large RV battery pack.

Now THAT was worth the price of admission. Thanks very much for sharing your knowledge!!

@brendontait6968

3 жыл бұрын

Cheers Owen

Brilliant video man! Totally enjoyed your thorough run throughs.

@brendontait6968

2 жыл бұрын

Cheers

Thank your for this interesting video. I’ve got a question, I totally understand the safety matters,but what about weights? your build seems amazing but quite heavyweight, I’m wondering if it is good solution for my max 3.5T van built...

@brendontait6968

3 жыл бұрын

Hey, no problem.. weight doesn't matter that much for me since my truck is 12T. I guess my build is likely around 130kg. My build is based around longevity, reliability, safety and ruggedness. In your situation with weight as one of your primary restrictions I'd personally look at another chemistry. Keep an eye out, will be doing other battery builds that might better suit you.

@aurelienf284

3 жыл бұрын

Thank you very much for your answer. I'll looking forward your next videos then (you just won a subscriber / notification bell) :)

You can heat locative up with a soldering iron or some other heat source to make it pliable sos not to do damage to your batteries, neutral cure silicon is a good soft threadlocker , great post cheers for the info and your time :).

Cool camper! Been watching you/LTO tech almost 2 years!

wow just learning. great job. maybe i can catch on. ty

A very nice video! What kind of BMS are you using with these cells?

@brendontait6968

3 жыл бұрын

I'm just using a shitty chinese BMS in a couple of weeks I'll do a video of BMS wiring and will cover it there. Thanks

@ripsta2009

3 жыл бұрын

@@brendontait6968 look into the 6s qnbbms coupled with an isdt battgo for voltage monitoring. The 2 work great together.

10:10 Im with you on that burner phone for the chinese software, got some for a BMS for my electric bike and it wanted access to make phone calls and if you denied it access it wouldnt run so stuck on an old phone.

@GoZipper

3 жыл бұрын

Super important post IMO, due to the CCP. The chinese people are good people but the chinese communist party is evil.

@dougfraser2131

3 жыл бұрын

@@GoZipper You worded that perfectly. The Chinese people are good people, but in China, they are burdened by the yoke of the CCP. It is sad.

Thanks, I especially liked the cost analysis.

@brendontait6968

2 жыл бұрын

Glad you liked it!

Awesome work.

Re: your cost calculations, those aren’t “per kWh”, they’re “per kWhcycle”. Which is a totally valid comparison once you venture outside a particular battery type! But it isn’t *that* new an idea.

@brendontait6968

3 жыл бұрын

My unit was intended to show cost per kWh of power delivered and not storage capacity. So for example... where I live, power costs around 13c/kWh (usd). People think that if they have solar charging batteries, their power is free. I was trying to show the actual cost of power delivery from different battery chemistries. So for eg if you had bought those AGM batteries, (and you'd been given the rest of the solar setup for free) each kWh of electricity that you used would cost you 48c

@lmp2208

3 жыл бұрын

@@brendontait6968 You nailed it. Definitely the most relevant way to compare kWh costs to a normal on-grid set-up. The cost per kWh for the life of the batteries. The nerdy mathematicians might be right - the units are cost/kWh/cycle, but they miss the point - how to amortise the cost of the batteries in delivering each kWh, which have a limited life. And then there is the cost of all the other components. Some may need to be replaced in the next 10 years and "life-long" components still need to have some depreciation cost apportioned to them, even if it is only what that money could be doing for you elsewhere (5% per annum ?).

@Slebonson

3 жыл бұрын

and he is right that is the true cost of the batteries.

@markknotten1210

3 жыл бұрын

@@Slebonson consider the cost of electricity for all of the people that are buying replacement batteries at about $2,000 a kilowatt hour and they have to be replaced about every 500 Cycles. Companies like specialized. Bosch. And when you get into their lightweight much smaller batteries that the main selling point is you can bring on an airplane the cost per kilowatt-hour that the cost of electricity constitutes is insignificant. All of the cost is in the wear and tear of the batteries. Electric bicycle Market has two different types of customers. Those who spend tens of thousands of dollars on a toy they're going to use once or twice or maybe a couple times a year and then upgrade to keep up with the other one percenters and then the market place in places like India or even Singapore which although vastly different socioeconomically all recognize the bargain of a vehicle got the passenger can carry not just the vice versa. Gouging cheap chemistry's that costs much much more than Peyton 8 which you could after all permanently installed in a carbon fiber frame without any ethical compulsion to disclose to an airline that is actually an electric bike that's the way you get market share not past market share nobody cares about pasta market share when it comes to micro Mobility. It will never matter. When matter is is getting the cars off the road. Cars don't belong in public. They are toys and need to be kept at home or on private player grounds. The unicycle is what replaces the horse. It doesn't shit nor drop dead. That is if the hey you put in the frame has been properly fed with titanium.

@paulnoorbergen3514

3 жыл бұрын

@@markknotten1210 500 cycles ? Not even 2 years