Good job

Great job! Thanks for the video. The trailer looks great.

1957 traveling trailer two 3500 pound axles under I’m making a trailer just like that got it for $100 tree fell on top of it and destroyed the top tore it down to make a car hauler out of it. Enjoy making it first time welding this is fun 👍 thank you.

@titanfabinc

2 жыл бұрын

It's definitely worth it! Keeps a guy busy 👍

Nice, thanks for saving me a bunch of research. I have a similar trailer frame that I used with my winches and comealongs to transport various stuff. I wanted to see how to reinforce it so I can add D rings, Etrack etc. Cherry picker makes it very versatile. :)

Turned out great,lots of useful info,thanks for sharing

Nice rebuild my friend. Looks nice and i love the LEDs and the light bar for the plates!

@titanfabinc

2 жыл бұрын

Thanks man! At night the light strip does look pretty cool!

Nobody is going to say anything about the grey skyline in the background?!?!?!

Awesome awesome awesome just bought a trailer just like your's thank you for your knowledge....

@8:19, love how you just welded the square tubing on the sides of the old steel, you not only widened it out but also given it an extra strength to load it up with heavy items such as cars. I'm planning on doing up a diy trailer myself came across your vids and appreciate it alot, thanx man for the vids, keep'em coming, take care👍😁

@titanfabinc

2 жыл бұрын

Thank you, best of luck with your build. This trailer has come in handy so many times already!

I like this so much, good job.

I'm going to be building an ATV trailer over the winter and wasn't really sure how I wanted the boards to sit but I like your idea of tucking it under angle iron up front but might do mine on three sides instead. Thanks for the detail!

@titanfabinc

Жыл бұрын

No worries! Yeah it works out nicely, keeps the boards nice and tight!

This video kicks ass. Thanks man

Nice job!

looks good!

This is great I got a tent trailer I wanna use as car hauler. To move my tiny echo behind motor home. I imagine increase the a frame strength.

I like the video I have an old car trailer, which is home built. I need to rebuild it, for my 240 coupe so I can go to drift events! Keep up the content!

@titanfabinc

2 жыл бұрын

That's why I built mine, easy to tow my 240. Thanks! Will post videos when I have something interesting to do 🤟

Nice job! Getting a property with 30’ wrecked camper on it and thinking about doing this after I demo camper..

I'm doing the same. Was given the camper. I have some trailer house axles that will have to be cut down. Got them when I cleaned up and old rotten trailer house. Found 8 lug hubs and the brake kit.

@titanfabinc

2 жыл бұрын

Hell yeah! Best of luck!

Really nice build!

@titanfabinc

2 жыл бұрын

Thanks! Been wanting to do this for awhile now haha

@titanfabinc

2 жыл бұрын

Thanks! Been wanting to do this for awhile now haha

Awesome job. I’m doing one also

I’ve heard that front bar called a headache rack!

It came out really good !!

@titanfabinc

2 жыл бұрын

Cheers! I'm happy with it so far

@ParadiseAtvTrail

2 жыл бұрын

@@titanfabinc I used one of these frames and reinforced it and maid it 8ft wide by 20ft long and put a tiny house on it! It’s 13ft 5” tall!!! I’m also building right now a car hauler out of a camper frame like yours except it’s 6” thick I beam steel and it’s going to be 93” wide with drive over fenders and I cut the frame to 18ft long and welded a 2 ft dovetail! It looks amazing I will try to make a post of it in the next week when it’s done. I think you will like it!!!

@titanfabinc

2 жыл бұрын

@@ParadiseAtvTrail That's awesome man! They are worth the extra effort, sounds like yours put in work with the tiny home!

Awesome, Thank You…

I'm picking up an old camper frame hopefully today, I love that little shop you got going on buddy. Nice video

@titanfabinc

2 жыл бұрын

Cheers man! Mine has worked well so far! Good starting point for the money

@gerardolopez5875

2 жыл бұрын

@@titanfabinc @ nice build 👍👍👍 what about registration??

@titanfabinc

2 жыл бұрын

@@gerardolopez5875 It was stamped already because it was a camper

@darryladams519

Жыл бұрын

@@titanfabinc How's the trailer holding up? I'm thinking about doing this.

@titanfabinc

Жыл бұрын

@@darryladams519 Been solid so far! My paint hadn't held up the best but other then that this unir works awesome!

Good job, most trailers have there axeles positioned 60/40. This is so the trailer won't wag the dawg

👍🏽🇺🇸👍🏽 nice build..

It’s a very light flatbed. Perfect for your needs. The rear bumper is very weak so be careful when loading and the cantilever effect.

Nice job. You could have sectioned rhe axles.and extended them for width as well.

Not too shabby, I probably would have overbuilt it. Adding more crossmembers, torque tube, etc. But the decking choice makes it good and stout I'm sure.

@titanfabinc

2 жыл бұрын

Yeah for sure, I did add some additional crossmember but not too crazy. Hauled 6000 lbs of scrap steel on it, probably pushed it a little haha. But all in all it's been great!

Found some free steel to do mine from old bed frames!!they all the time throwing them out at the dump!!

Good job on the rebuild. it kind of looks like the axles are too far forward. I know this is too late but might want to google some similar length trailers and look at the axle placement. With them centered it will be too easy to load it wrong and make it dangerous.

@titanfabinc

2 жыл бұрын

Could be the angle of the photo. I took a good 8-10" of the back, axles are favoring the back but yes they are still pretty centered. Got it plated and have towed 4000lbs of steel, a old sn95 mustang and 24' lengths of tube.

Just bought a camper the same size for $100 and it needs a lot of work so I figured why not make a car trailer out of it since I’m always renting

@titanfabinc

2 жыл бұрын

Exactly why I did this! It's come in handy so many times already!

The one thing I would have changed was putting that narrow set of boards down the center or ran a piece of steel down the center, a) to have center line, and b) not have weight on the narrow boards

@titanfabinc

Жыл бұрын

Yes I do agree that would have been a better option for sure

My son just acquired a 34' version for free, it's in decent shape no real rust just surface rust here n there most of the original white paint is relatively intact, I was thinking the same thing about a car hauler just not sure of the capacity of the axles, it would be nice to be able to at least haul my 92 c1500 it goes about 4000lbs, that may be pushing it but I don't know. I would do Some beefing up so the axles are the limiting factor. The car trailer at work is made from big beefie c channel like maybe 8"x2.5"? Ish Can't remember . But it would haul a diesel truck no problem I'd say...Probably should shorten it tho 34' is huge!

Bro you the best 💪🏻💪🏻💪🏻 i jusy bought one for $250!!!!!! 30ft same as yours. Im going to sand blasting , painted and do the same as yours men i have to say thank you !

@titanfabinc

2 жыл бұрын

Oh no worries! Good luck with build, they work out great with a little elbow grease!

@jesusjhernandez4911

2 жыл бұрын

@@titanfabinc haha yeah ! Hey how long is the trailer now?

@titanfabinc

2 жыл бұрын

@@jesusjhernandez4911 its an even 20'. It's was just about 21" before I modified it

@jesusjhernandez4911

2 жыл бұрын

@@titanfabinc mine is 26 and the tail is like soft im thinking to cut 2-3 ft or reinforced pretty well

Gucci skyline!!

I would say just one of those axles are worth at least $500 so I’d say you got a really good deal

All and all you can make a trailer out of one. It wont be as cheap as you hope it will. It will be narrower than a regular trailer. And it will have around a 5000 pound capacity. Trailer looks nice.

@caspercook7337

3 ай бұрын

they got 7,000 lbs capacity they got 3,500 pound axles lol

@aaronwood3540

3 ай бұрын

@@caspercook7337 wrong, 2 3500# axles equals 7k minus the weight of the trailer. Safe load capacity maximum would be 5k. You put 7k on it it would be overloaded.

nice .. picked mine up for $200 .. but its only 20 x 5 ... wish it was wider ....but will be later on in the future ;)

@titanfabinc

2 жыл бұрын

Hell yeah. Bang for buck there a good start!

👍👍

Well the angles were that way to hold the water and black water tanks... The safety chains are suppose to be welded with round bar cause it is illegal to weld the chain link of a safety chain now. You may want to redo the safety chains.

@titanfabinc Funny, I just built out my camper trailer, and the original trailer looks identical to yours. Curious who the manufacturer was. 20ft long and I made it the width of the "wings" about 91" wide.

Hey there I’m trying to perform a big move and have a trailer dual axle for 24 footer that I’m looking to convert . The cost of shipping/moving is INSANE at the moment soo imma watch the shit outta this and maybe jam you up for advice ?

Hello, nice video. What is the wall thickness of the 1 1/2 by 1 1/2 frame and final width you ended up with between the fenders? Thanks.

@titanfabinc

Жыл бұрын

If I recall it was 3/16" thick+

YOU COULD HAVE A 6X8 RUNAWAY CAMPER ON THE FRONT OF YOUR TRAILER..

Should have added Atleast one piece of metal down the length of the trailer to give it more strength. Two would have been best.

What are you doing for tie down points? Did I miss that part of the video?

@titanfabinc

2 ай бұрын

They are actually underneath the trailer, I used angle iron. I did briefly touch on this in the video, being the trailer is so narrow I am able to run the straps around the deck to tie downs underneath the trailer when securing a car. Otherwise there is smaller bolted anchor points for small loads

Is the skyline for sale

How wide was the original frame without the outrigger bars sticking out? As in the frame where it fits between the tires

@titanfabinc

5 ай бұрын

I honestly can't recall.. Id like to say approximately 6'? Id have to measure it for you

Sweet job on the trailer...also...was that a skyline I saw there in the back?

@titanfabinc

10 ай бұрын

Yes sir that is a skyline!

Just finished mine 7x16 made out of a camper frame have $500 in mine

Noticed you’re in Alberta (At least your trailer plate said so haha). I was hoping you could tell me whether or not this had a vin or you had an assigned vin. If you had the vin assigned were they at all concerned that it used to be another trailer/where you acquired the trailer? I’ve built my own from scratch so it wasn’t in question when they assigned it a vin. However I’m looking to do a deck over starting with a used travel trailer.

@titanfabinc

Жыл бұрын

It was already stamped as a travel trailer. All I said was that it's been painted black! No questions asked. For those that are curious this trailer is still going strong. I had replaced the tires with 4 new ones after I had a blow out. Also the plastic leds tail lights aren't very durable at all and have cracked pretty bad from little bumps and scrapes

@danburch9989

Жыл бұрын

The original VIN would have identified it as a travel trailer. Where I live, it would have to be assigned a new VIN as a home-built utility trailer.

Do you not need a battery to run trailer brakes / breakaway switch?

@titanfabinc

11 ай бұрын

No definitely need to! I have since added the breakaway switch and battery. The trailer brakes have worked all along

Where in canada buddy? You look really familiar im from Alberta but moved to bc a while back

@titanfabinc

Жыл бұрын

Calgary Alberta!

Is that an R32 in the background

What size square tubing did you use

@titanfabinc

3 ай бұрын

If I recall it was 2x2x3/16" or 1/4"

Is you skyline for sale buddy

I found a frame I was going to build one but it isn’t titled so it would be pretty much worthless

WOULD YOU HAVE ENOUGH ROOM IN FRONT FOR A CAMPER ?

@titanfabinc

2 жыл бұрын

I'm sure you could depending on the model!

♥️😍👍🙏💰

how much of a headache is it to get a vin on one of these camper/flat deck builds or did you not do that and just use it incognito? I've heard it's around $500 for the inspection/vin but I'd assume they'd instantly know it was a trailer frame and not as strong as a proper car hauler frame and it wouldn't be rated for a full 5000lbs (assuming 3500 axles)? Just wondering cause I've seen a bunch of these $600 camper frames on marketplace, is it worth building into a car hauler if it may never pass the vin inspection?

@titanfabinc

3 ай бұрын

Well this already had a vin, and was easy enough to get a plate for. They never asked questions for me, yeah 2×3500lbs axles. Id be happy to put 5000lbs on this without a worry. Ive done multiple trips of steel, long hauls with race car + gear, s197 mustang. Never an issue

@hurtinalbertan3844

3 ай бұрын

@@titanfabinc I actually somewhat answered my own question today lol I found a forum for 2007 which said there isn't a VIN inspection, it's just literally you pay for a guy to come out and give it a vin. Which is terrifying to think of the sketchy trailers that are on the road. On your registration does it say "travel trailer" with the old VIN that's in the system or does it say homemade? Or could someone tell the registry anything like "car hauler" and in the eyes of the law that is now what it is? lol

@titanfabinc

3 ай бұрын

@hurtinalbertan3844 All I said to them was that it is a now painted black and that it is used as a utility trailer. I do agree there is some sketchy home built trailers out there, this did save me some messing about being that it all ready had a vin stamped in it and had been registered before. I did strengthen the frame, as well as widen it. But the way it was built as far as axles, brakes etc is still the same. I am a journeyman welder in Alberta, im more then confident that the modifications done are adequate if not better then what is was prior to me. The cross braces literally had 2 welds per tube and were very easily wacked off with a hammer and some grinding. Ive had a few people comment with how stupid this is, but again 2×3500lb axles. It was rated to carry a load, whether the load was "self-supported" or not the frame underneath is the real steel part of a camper. With some additional cross braces, and the additional width (2x2x3/16" HSS) around the entire upper perimeter I would believe this is a perfect candidate for a budget flat deck. Its still going strong, my paint didnt hold up so well. But the trailer it self is solid with new tires and axle bearings

@hurtinalbertan3844

3 ай бұрын

​@@titanfabinc All good, yours definitely looks well done and you know what you're doing. Definitely some of the camper frames are pretty cheaply welded together and need to be strengthened. I'm pretty sure a lot of the actual frames are only 1/8 wall tubing which might not be so good for a full 5000lbs over the length, 3000-4000ish sure. You added the 2" square tubing so that probably helps with stiffness. Most people probably strip the camper, slap some ply wood on it then go towing their 1 ton on the "legal trailer" lol

So If it’s titled as a camper can you just use it as a trailer with that title still?

@tomahawksteak6672

Жыл бұрын

In my state I took my camper title and a weight slip to my dmv. They took that and retitled my trailer as a utility trailer. I registered it for 7000 pounds which is plenty for a sxs hauler

what was the overall weight of the trailer?

@titanfabinc

Жыл бұрын

Honestly im not entirely sure the total weight!

The amber lights are suppose to go on the front corners on the side. Better check your regulations. Cause there is a couple of things illegal about this trailer build.

@titanfabinc

2 жыл бұрын

Thanks for your input I'll look into that. I live in Alberta, our trailer rules are pretty leanent. It's been plated and used quite a bit since it's been built

Where are your tie down hooks

@titanfabinc

Жыл бұрын

They are located underneath, the straps wrap around the deck. I did add additional d hooks on the bed itself after this video was made.

Crazy to do this with a camper frame not heavy enough for car hauler they are to light weight not the way to do this is a bad idea

@MrSprintcat

8 ай бұрын

It's been done thousands of times.

You don't think this could be done with a boat trailer ?

@titanfabinc

Жыл бұрын

I believe the use of the frame/axles would be a good starting point. But boat trailers from my experience have a pretty designated design which could get tricky making a "flat deck"

You said how long your trailer was but you never gave the width of the trailer .

@titanfabinc

11 ай бұрын

She isnt very wide if im honest. If I recall its just about 7' wide

@kwametwumasi8543

11 ай бұрын

Ok thank you

To be legal, you're gonna have to nix that blue license plate light setup and replace it with the cluster of three ID lights in the middle for trailers over 80" wide and light your plate from the side. Aren't their angle iron cross members way to light duty? You know what works great for treating wood like your trailer deck is just used motor oil.

The geometry isn’t correct. Should cut some off the back.

@titanfabinc

2 жыл бұрын

So it's had bad geometry since it was manufactured? It's a 1991 camper and was used before I got it. Seems to be fine for me, have used it a good 2 dozen times since it's been finished. Do appreciate the input 👌

@collinlee1192

2 жыл бұрын

I just bought a 23.5 foot camper frame similar to this, ended up cutting it down to 18.5, with a 3/4 ton pickup i wont worry about tongue weight.

@rsoldscape

Жыл бұрын

@@titanfabinc you seem a little butthurt when someone gives criticism.... he's right. And no, it wasn't wrong when it was manufactured. The manufacturer wasn't putting cars on it..? You dumb

I have done several of these. I will assure anyone you cannot convert one of these for 600 bucks even it is free. If its done right, buy the time its over you can buy a proper built trailer in good condition. But!! Wheres the fun in that? You can make these 8 ft wide with drive over fenders and they definitely need beefed up after the camper is removed. Also the axles need moved back for proper load position and reduce tail whip. Im about to start on another one thats a fifth wheel. It will be a tongue pull when im done. You will never know it was ever a camper when im done. It will be a 20 ft deck over.

@titanfabinc

2 жыл бұрын

Yeah I've used it quite a bit since it's been finished. If I did it again I'd make it wider for sure. But other the the width I've moved 4k lbs in steel, moved my mother in law, moved client cars and not to mention my own car. When I put my own car on the trailer the wheels almost touch the wheel wells going on. But still happy either way!

A camper frame not strong anuff for a car hauler

@titanfabinc

2 жыл бұрын

That's your opinion!

@jasonhoke3998

2 жыл бұрын

@@titanfabinc No its common fucking since which people have none of these days

@titanfabinc

2 жыл бұрын

@@jasonhoke3998 I'll have to listen to you "since" you seem very intelligent! Thanks for your input 👍

@kaneb221

2 жыл бұрын

Ur inglish not strong anuff for talk common since

@danielbuckner2167

Жыл бұрын

@@titanfabinc That and the "opinion" of engineers but what would somebody with knowledge or torsional forces, material strengths and dynamic loads know anyway.

People need to stop doing this nonsense. Those frames are not strong enough for their intended purpose which is a self supporting load

Stop talking and start filming so we can see the work

Hey, can you talk less and show more of you working? I’m more interested in seeing rather than listening

@derrickpretzer5465

Жыл бұрын

Rude!

@jregamey

Жыл бұрын

@@derrickpretzer5465 was he talking about you? Wondering why your offended lol.

@rickbusch7911

4 ай бұрын

Turn the fucking volume down if it bothers you that much. Or move on, rather doubt you're being forced to watch.