Sounds awesome💓

Sounds SICK! Nice

@RaztechPowersports

4 жыл бұрын

Glenn Lee 🙏🏻🏁🇺🇸

This is awesome!

@RaztechPowersports

4 жыл бұрын

Xander Cage 🤙🏻🏁

That's just fantastic.

@RaztechPowersports

4 жыл бұрын

Colby Graves 🙏🏻🏁

Vette Sounds and looks awesome man😎👍🏾🔥💯.....I’m from Louisiana myself ......looking to add a c6GS next my c4 1987

@ttravreefsaquatics8354

4 жыл бұрын

New sub😎

Sound amazing wow

@RaztechPowersports

2 жыл бұрын

Thanks!

I’m from Louisiana too!

I love it.Mine is an 09 base and I am having kooks longtubes,x pipe,and borla s type axle backs installed in a few weeks.Im also debating with my auto to stage 1 or 2.Im not really trying to do a stall but my end game is an a&a supercharger and would like to have it tuned for 7psi and run 93 pump gas.I also have the same color as yours

@RaztechPowersports

Жыл бұрын

If you’re going to supercharge it I would get a cam that is best suited for boost. The Texas speed stage two cam was pretty aggressive for the stock converter but my tuner got it to work. Took a few tries though

@stevesippy8258

Жыл бұрын

Good info,I appreciate you sharing that info.I will probably just stick with the stage 1

Nasty af

@RaztechPowersports

Жыл бұрын

🏁🏁

Could you make a vid with a few flybys? Sounds siiiiiick 👌🏻

@RaztechPowersports

4 жыл бұрын

Actually just sold the car last week :( But let me tell you, it violent at WOT

Whats the total hp numbers

you shall be missed

@RaztechPowersports

4 жыл бұрын

operamatt indeed 🙏🏻🏁

😍

Did you really have to mash the breaks when at a dead stop since you had the stock stall? And was it jerky at all? I really don’t want to have to get a higher rated stall so was hoping you could give me some insight. I don’t mind the rocking but really just wanna know if the car jerks at low speeds or if a good tune makes it really drivable. I’m gonna get it tuned by Late Model Racecraft in Houston, just not sure if I should stick with a stage 1 for say screw it and get the stage 2

@bh5831

2 жыл бұрын

I talked to G-Force in Houston a few days ago. I’m looking to do a cam stage 2. If you have the automatic A6 (mine is a LS3 09) then stage 2 is the max you can do on stock converters. No stall required according to that shop. They are very reputable Chevrolet shop. I know of LMR as well but consider g force too :)

What part of LA are you in? I've got a similar setup - would be great to meet up sometime!

@RaztechPowersports

4 жыл бұрын

njedwardz actually just sold it a few weeks ago, but I’m sure you’ll see it at local car show in Baton Rouge or Hammond.

2013 GS just like mine, you can tell it’s a 13 by the steering wheel I believe? It looks so much nicer than the other C6 steering wheels

@RaztechPowersports

4 жыл бұрын

Daenerys Targaryen yes the 2012s and 13s got the updated seats and steering wheel, which is a big upgrade imo!

What other exhaust did you do, I want exhaust, but was planning on keeping my dual mode exhaust, thanks

@RaztechPowersports

3 жыл бұрын

That was the factory dual mode exhaust + header and cam

Where did you get that cut out opener? I just bought an 08 ls3 car and I'm loving it. I just pulled the fuse to keep them open. But I'd love the option to close them when I want. Your car sounds incredible. I've got the 6 speed auto and debating what cam to run myself. I love the way this sounds.

@RaztechPowersports

3 жыл бұрын

I’ll try to add a link for the remote today. Stage 2 was awesome but it did affect the daily driving ability (low vacuum for brakes, some surging at idle). I would start with a set of longtube headers and a tune first 🏁

@RaztechPowersports

3 жыл бұрын

I added a link to the Mild 2 Wild controller in the description. Its really nice to have the option between quite and loud.

@fonzdreamsbig

3 жыл бұрын

@@RaztechPowersports I ordered the mild 2 wild kit right away. Thank you! I think that's an awesome kit. I have a problem with doing one thing at a time. I've heard headers and a tune wake these things up a lot

@RaztechPowersports

3 жыл бұрын

@@fonzdreamsbig big time! About 50 more hp with Longtube headers and a tune

I have a 2013 grandsport and I just bought texas speed long tube catless headers and xpipe. What do you know about fitment issues on these headers?? A lot of people are telling me that they are difficult to install. Did you have any issues installing them???

@RaztechPowersports

2 жыл бұрын

I have to do a little bit of trimming before the collector on the header. Also the fitment was tight around the rear subframe. Just takes time and patience.

when you plan to leather wrap the dash and doors with red stitch and , suede factory 427 wheel $300 GM ?

@aphil4581

3 жыл бұрын

I got a stitched and padded black leather console door lid with cross flags(super comfortable) with an excellent leather wrapped wheel on my Black 08 convertible when I bought it. I test drove a Z06 a while ago and just the stock console lid made me want to through it out the window.

That cams lope....

Did you have any issue with the headers hanging too low? seems like this is a common issue with TSP headers and is a reason im hesitant to buy them.

@RaztechPowersports

4 жыл бұрын

123SandW man they do hang kind of low. Just one pipe actually. My car was lowered slightly and it did kiss a few speed bumps. Besides tall speed bumps, no problems.

@backyardboosters9128

3 жыл бұрын

I have them on my 09 the driver side definitely hangs too low.

How is the driving with stock converter?

@RaztechPowersports

2 ай бұрын

It really wasn’t that bad. Did have to stand on the break a little harder because of the lesser vacuum.

What are the specs on this cam if possible

@RaztechPowersports

2 жыл бұрын

Tsp stage 2

Was the engine an LS3?

@RaztechPowersports

3 жыл бұрын

Yes

You think this cam is good on stock lifters? The chop is beautiful

@RaztechPowersports

2 жыл бұрын

I believe so and yes this cam sounded killer 🏁

Surprised you were able to run stock stall with stage 2… that’s 12 degrees of overlap. What length pushrod did you go with?

@RaztechPowersports

2 жыл бұрын

This cam works with the factory pushrods and rockers. I did put solid bushings in the rockers. The only problem was a lack of vacuum at idle but it was doable

@peterantonopoulos3373

2 жыл бұрын

@@RaztechPowersports you had enough lifter preload with 7.4 length? Yeah I’m gonna go stage 1 for better drivability since I drive it everyday

@RaztechPowersports

2 жыл бұрын

@@peterantonopoulos3373 yeah for daily driving, stage 1 for sure

@peterantonopoulos3373

2 жыл бұрын

@@RaztechPowersports you think with 2.5 degrees of overlap I’ll be ok with vaccum for brakes? My car is an auto as well

@RaztechPowersports

2 жыл бұрын

@@peterantonopoulos3373 yes the stage 1 cam will be better. That heavy chop doesn’t make for good vacuum lol

Nice wheels. What kind are they?

@RaztechPowersports

4 жыл бұрын

baby shark thanks, OEM C7 Zo6 wheels and tires.

@bmann792

4 жыл бұрын

Brad Raziano they are amazing looking wheels! I have black on my c6 and it was a huge enhancement

@RaztechPowersports

4 жыл бұрын

B Mann my friend has them in black on a ruby red Grand Sport and it’s sexy... 🏁

Was this a manual car? If auto what stall?

@RaztechPowersports

4 жыл бұрын

2ss _rs automatic and with a good tuner, the stock stall is fine. Little choppy it traffic but totally doable.

@Gmz_JP

4 жыл бұрын

Raztech Powersports thats good power through an auto i was thinking i was going have to put a stage 4 cam and big stall to make that power i really dnt want to have to drop the rear end/trans to install a converter 😂

@RaztechPowersports

4 жыл бұрын

2ss _rs unless your drag racing only, don’t do anymore than a stage 2 imo. Especially if you don’t want to swap the converter. Big job on a vette unfortunately.

You can run this cam on a stock stall ?

@RaztechPowersports

3 жыл бұрын

Yes but the stage 2 was slightly pushing it

@mikeycairo78

3 жыл бұрын

Ya currently running the Tick Performance stock stall cam on my Auto GS but I wanna go bigger so I can do some heads with it and I heard the TSP stage 2 is the biggest you can go on the stock stall but haven’t been able to get much info on how it drives with a stock stall

@RaztechPowersports

3 жыл бұрын

@@mikeycairo78 He drive completely fine if you have a good tuner. A little bit of surging but it was mostly the lack of vacuum (brakes) at idle that bothered me slightly

@mikeycairo78

3 жыл бұрын

Ya that’s what my main concern is the lack of vacuum and I end up getting a 2 second delay when I hit the brakes

@RaztechPowersports

3 жыл бұрын

@@mikeycairo78 yeah it happens too.. I was kicking around the idea of adding a 12v vacuum pump

What you get to replace the c6?

@RaztechPowersports

4 жыл бұрын

Hemi Lyfestyle used lexus rcf or zl1 🤷🏻‍♂️ need something with a backseat.

@HemiLyfestyle

4 жыл бұрын

@@RaztechPowersports I have 3 kids that's why I have a built Chrysler 300c 😂 I know what you mean

@RaztechPowersports

4 жыл бұрын

Hemi Lyfestyle Yep you know the struggle.. I have a 2.5 year old and about to have a newborn. Both boys so I’m think I’ll get something next year 🏁

@HemiLyfestyle

4 жыл бұрын

@@RaztechPowersports yeah I literally just had my newborn a week ago. I'm doing good so far. I bought a house last year so wife told me if I'm able to. I can buy a c6 next year. Hopefully everything goes good

@RaztechPowersports

4 жыл бұрын

Hemi Lyfestyle congrats and hell yeah man! The vette is a completely different experience, full racecar feeling when your driving.. just not very practical. My little boy would come sprinting out the house every time i started it and would cry when I left without him.. not a great feeling 🙃

What RPM does it idle at once it's warm?

@RaztechPowersports

4 жыл бұрын

James Golen around 700-750 when warm.

@androiduberalles

4 жыл бұрын

Sweet, sounds great. I'm looking at throwing one of these in mine soon.

@RaztechPowersports

4 жыл бұрын

James Golen thanks! Yeah man I was happy how the cam performed too. Still had plenty of low end torque but absolutely ripped above 3500 RPMs!

How much hp did you gain?

@RaztechPowersports

2 жыл бұрын

100 RWHP 👍🏻

@nick__cars

2 жыл бұрын

@@RaztechPowersports so when you say RWHP, is the the power to the wheels? What will the crank be?

@RaztechPowersports

2 жыл бұрын

@@nick__cars yes on the dyno with an automatic. At the crank, maybe 130 hp ish

@nick__cars

2 жыл бұрын

@@RaztechPowersports if you don’t mind me asking, how much on estimate with a cam/ headers be with a tune and Dino. I may have some help with the install.

@RaztechPowersports

2 жыл бұрын

@@nick__cars about 2500-3500 when it was all done. Well worth it

What did this have for whp before you sold it.

@RaztechPowersports

3 жыл бұрын

476 RWHP 100 degree day and humid Louisiana 👀

@champion1389

3 жыл бұрын

@@RaztechPowersports was it a mustang dyno? Or a different kind of dyno?

@RaztechPowersports

3 жыл бұрын

@@champion1389 ahh I can’t remember 🙃

@champion1389

3 жыл бұрын

@@RaztechPowersports all good man lol

What did the car end up making at what rpms?

@RaztechPowersports

4 жыл бұрын

Bryan Massey 477 RWHP. Can’t remember at what rpm. Cam had a nice torque curve. 100 degree day and mild tune

@pushrod9390

4 жыл бұрын

@@RaztechPowersports nice! Have a 2010 GS M6. Same cam, no underdrive. Went with 2" Kooks catless, waiting for them to get back from coating so they can be installed and car tuned.

@pushrod9390

4 жыл бұрын

Also went with the Halltech 108.

@RaztechPowersports

4 жыл бұрын

Bryan Massey yeah just being a manual, you’ll make more rear wheel horsepower. When you get it together it will be a ball 🏁

@pushrod9390

4 жыл бұрын

I can't wait! 490 would be great, 500 would be ecstatic. Was your remote setup the Grand Sport Registry? That came in the mail yesterday.

Man I’m just going to say it those valves should never be closed on that car EVER

@RaztechPowersports

Жыл бұрын

Agreed 😂

@LT4_Gio28

Жыл бұрын

@@RaztechPowersports I just got bald eagle cam with TSP 3inch headers and stock exhaust and my god it’s BEAUTIFUL

Give me a shout if you ever want to sell it!! Cash in hand.

@RaztechPowersports

Жыл бұрын

She’s already gone 🥲

@garymeinen3663

Жыл бұрын

@@RaztechPowersports , I've been looking for this exact color combo and setup for months with no luck. Oh well.

@RaztechPowersports

Жыл бұрын

@@garymeinen3663 ahh I know that feeling. Goodluck with the hunt!

Exhaust valves at this point is literally useless....

@RaztechPowersports

4 жыл бұрын

gavin P They made a huge difference in person