Cafe Racer Build ★ Hump Build, Fibreglass Mould, PART 2, Honda CB750 Cafe Bike Ep 26
Автокөліктер мен көлік құралдары
PART 2 of Cafe Racer Hump Build, Fiberglass (Fiberglass) Mould, Honda CB750 Cafe Bike Episode 26. I finishing off the foam shaping, make a fiberglass mould, and make a hump cowl from the new mold as well as a seat pan.
#HumpBuildFibreglassMould #CafeRacerBuild #CafeRacerGarage
Parts and tools I use:
www.amazon.com/shop/caferacer...
💥💥Music I use, TRY IT FOR FREE bit.ly/2OR9jRq - AMAZING for KZreadrs💥💥
In Cafe Racer Build PART 3 it all comes together.
Leave any questions and comments and Smash that Like Button If You like this video!
I've put together a small kit of items you will need to start your own Hump build including the foam for shaping, (Be careful not to use any other foam or the resin will eat into it)
TOOLS I USE OR RECOMMEND.
Hitachi 5-Inch Angle Grinder amzn.to/2HaDsXq
Hitachi Cordless Drill 18V amzn.to/2FjsrTc
Triton SuperJaws (Foot Clamp) amzn.to/2FfyoV6
Sheetmetal Folding Machine www.redfoxmachinery.com.au/?ref=1
Welder-Lincoln Electric Easy MIG amzn.to/2oMAsd4
Welding Helmet (Auto) amzn.to/2D4YJix
Rivet Nut Kit Set amzn.to/2tj2JN7
Center Punch (Spring Loaded) amzn.to/2D2nhJe
SEAT HUMP BUILD KIT
Foam For Shaping amzn.to/2qPaJAE (Safe For Resin)
Fibreglass Resin amzn.to/2tmlA9P (Video)
Fibreglass Mat amzn.to/2tpNr9o
GelCoat (White) amzn.to/2rEkeDt
FlowCoat- (Gelcoat with wax for easy sanding) amzn.to/2IcMfgg
Fiberglass Roller amzn.to/2HbJ97o
Rasp amzn.to/2HORZcM
Hot Glue Gun amzn.to/2K6W9xy (Not Mini)
Contact Cement (Foam Glue) amzn.to/2GaSehq
Foil Duct tape amzn.to/2FZfj6z
Mould Release Wax amzn.to/2G3LEJK
=====================================================
For all commercial enquiries (Product Testing and Reviews): Please contact me at caferacergarage07@gmail.com
=====================================================
Want to help me create more content for you each week? You can now make a donation through Patreon! Even the smallest amount goes a long way and will be very much appreciated.
/ caferacergarage
=====================================================
★ DON'T FORGET TO WATCH
=====================================================
★ 01. Cafe Racer ★ Tyres, Wheels and Fitting Wheel Bearings The Easy Way Ep 25
• Cafe Racer ★ Tyres, Wh...
★ 02. Cafe Racer, Hump Shaping the Fibreglass Mould, PART 1, Honda CB750 Cafe Bike Ep 24
• Cafe Racer ★ Hump Shap...
★ 03. 3 Channels Building ★Cafe Racers that I follow - Ep 23 - MotoVlog
• 3 Channels Building ★C...
★ 04. Removing Wheel Bearings, Powder Coating Prep, Cafe Racer Garage Tools - CB750 Cafe Racer Build Ep 22
• Removing Wheel Bearing...
★ 05. DIY Cafe Racer Build ★ Ep.21, Clutch Lever Fix, Mail Time & installing a Vinyl Backdrop
• Clutch Lever Fix - DIY...
★ 06. Cafe Racer Build ★, Custom Rear-Sets, Seat Build and Removing Wheels for Powder Coating Ep.20
• Cafe Racer Build ★, Cu...
=====================================================
★ Goal - 1 Million SUBSCRIBERS
=====================================================
★ LIKE | COMMENT | SHARE | SUBSCRIBE
=====================================================
★ Please Subscribe Cafe Racer Garage Here:
/ caferacergarage
goo.gl/cjRKUC
=====================================================
★ CONNECT WITH ME ON SOCIAL MEDIA
=====================================================
★ Instagram: / cafe.racer.garage.07
=====================================================
★ Facebook: / caferacergarageau
=====================================================
★ ABOUT MY CHANNEL
=====================================================
Hi Folks,
This is Dan, let me show you step by step on how I build stuff, including my CB750f2 Cafe Racer, SUBSCRIBE to follow my future builds, I'm based in Australia but I do travel a lot so check out my other channel with my amazing travel videos.
=====================================================
Пікірлер: 245
ALL Parts - www.amazon.com/shop/caferacergarage
@natec7398
4 жыл бұрын
Awesome, thanks for putting this together for us noobs 😀. After it's all said and done for you, any other suggestions in regards to the hump or seat? Great channel btw. Greetings from SoCal 🤙
love the idea of that challenge "1200 dollar budget cafe racer"
@CafeRacerGarage
6 жыл бұрын
Thank you for your comment and yes I'm looking forward to It, the response to do this build is overwhelming :)
Low budget Scrambler would be awesome!
@CafeRacerGarage
6 жыл бұрын
Wow dude, I can't believe the number of comments I have had On this video about the scrambler build, Thank you for your vote and comment :)
@salskars6637
6 жыл бұрын
+1 on the Scrambler build and congrats on the fiberglass work. Subcribed. Awesome!!!
YES! Do the CX 500 build. Please!
@CafeRacerGarage
6 жыл бұрын
Its looking positive thus far :) Thank you for your comment :)
A challenge video would be awesome !
@CafeRacerGarage
6 жыл бұрын
Thank you Brody, I think you are right :) I'm hoping it does get a lot of interest so I get to build it :)
Great work. Love how you made that poly saddlepan!
@CafeRacerGarage
6 жыл бұрын
Thank you my bike building brother :)
I have a fiberglass shop and I got a few tips from your video. It is always good to see how others go about the process.
@CafeRacerGarage
6 жыл бұрын
Id love and tips brother, I'm always learning and I will never stop :) Im all ears :)
my favorite video so far. really good work! would love to see a series of the cx build
This is an amazing video I’m using this to make a carbon fiber cowl for my XSR900 anniversary. I have a second subframe so I think I’ll make a chipped down cafe tail for it as well!
great idea with finding the equivalent items so folks can do this job with a quick shopping trip.
YES!!!!! To the tracker build! 😀😀😀
Yes please. Great idea. Looking forward to view your build before I start mine.. 78 CX500, bought with rear frame chopped by previous owner.
@CafeRacerGarage
6 жыл бұрын
Kevin Martin thanks Kevin I have a stock 78 CX500 as well, it’s going to get the Cafe Racer Chop :) you will see it in tomorrow’s video :)
The best episode so far! can't wait to see the final product of the hump! Cheers mate!
@CafeRacerGarage
6 жыл бұрын
thank you so much, ma man that means a lot to me :)
Low budget challenge is a GREAT idea!
Love your work, and it would be great to see the CX build!
Do the scrambler build. That would be some great content.
@CafeRacerGarage
6 жыл бұрын
Ok Calvin its looking like a positive so far :)
yeay for your the budget scrambler.
@CafeRacerGarage
6 жыл бұрын
Marshall Marque it’s starting very soon :) thank you for your comment
Really great video! I wonder how difficult would it be to shape a front fairing using the same method... Also hell yeah everyone would be interested in another build! Especially if it's a low budget build that makes you think more outside of the box.
@CafeRacerGarage
6 жыл бұрын
Thank you Allcartuner I think any shape is posable with fibreglass, I think is going to be a positive on the scrambler tracker build so far :)
very informative as always. KNOWLEDGES GAIN!!!
@CafeRacerGarage
6 жыл бұрын
Thank you T Phas, You always say such nice comments :)
Nice job.
Yay to the scrambler
Yes. Go cx. Also, nice job with the fiberglass.
ya it sounds cool
Great video as per usual. I would love to see a scrambler build, you’ve definitely got the skills to do so and if you do I’d recommend adding the price up each episode. Keep up the good work👍🏽
@CafeRacerGarage
6 жыл бұрын
Charlie Power great idea and thank you 😊 for the comment Charlie.
Yes to the challenge. Sounds good.
@CafeRacerGarage
6 жыл бұрын
Ok thank you for the vote, It's looking like a positive thus far :)
Im probably going to follow this process when i build my seat hump
@CafeRacerGarage
6 жыл бұрын
gianluca spinosa any questions just ask :)
Fantastic job. Looks great
A Scrambler would be sick! These videos are awesome. You and Combustion Junction have inspired me to play around with my GS 1100 once it is registered. Keep up the good work. Mick, Port Macquarie
The cx should easily be able to make tracker or scrambler out of. the real deciding factor is where you buy parts, what brand you buy and how much work you do yourself vs. buying bits. I would really like to see this type of video since I am currently building a mild tracker/brat 1982 CX500 C.
Love to see the CX project, mostly just because they've been done to death as a cafe racer and I'm itching to see something different. A tracker would be an awesome project.
@CafeRacerGarage
6 жыл бұрын
Matthew Wright thank you Matthew :)
Yes I want to see that
Looks great! You have a talent for thinking outside the box. +1 for the CX
@CafeRacerGarage
6 жыл бұрын
Vote excepted and thank you so much. Its amazing to get comments like this.
Do IT ! Low budget Scrambler !
Just build the cx mate! Loving the build everyday! Your doing better that a lot of pros! Hats off 👏 👏 👏 👌
@CafeRacerGarage
6 жыл бұрын
Nuno Cox thank you so much mate ;) I’m just doing my thing and sharing it. Love the comments :)
Looking great mate. Can’t wait for part 3 👍
@CafeRacerGarage
6 жыл бұрын
Josh Panton thank you Josh ;)
Love the videos, keep them coming. Interested in more builds in the future too
@CafeRacerGarage
6 жыл бұрын
Hi Travis I have plenty to come and I aim to improve my video quality as much as posable, so stay tuned and thank you for the amazing comments :) its the comments that really keep me going :)
Yes I'd be keen to see you change your CX500 into a Tracker / scrambler for sure!
@CafeRacerGarage
6 жыл бұрын
Ian Anderson thank you Ian it’s looking good thus far and loads of interest in this build:)
Build it!
@CafeRacerGarage
6 жыл бұрын
Thank you Bryan :)
Do the CX! The CX650C is my favorite model. I have four, one being a parts bike. The first one I did as a solo seat tail dragger done in OD green with red wheels and white wall tires. Basically, a WWI bi-plane color scheme...complete with bullet hole decals. Get compliments on it all the time. They are just great bikes. I'm doing a CX500 right now, but it's being built for a friend. I would really enjoy seeing how you would redo the CX500!
Definitely on the cx challenge.
@CafeRacerGarage
6 жыл бұрын
Brice Loyd thank you Brice, it’s looking good so far, I’m so overwhelmed by the amount of positive comments on doing this cx build 😊
Awesome work once again Dan. I think the scrambler tracker project would be great 👍👍👍 keep making the videos mate and I will keep watching
@CafeRacerGarage
6 жыл бұрын
Thank you Colin I plan on making better videos over time so not only will I build bikes but I plan on being the best at what I do :) Tracker Scrambler looks like it maybe a yes.
You've got loads of talent mate well done on your build so far, A CX scrambler build would be amazing 👍
@CafeRacerGarage
6 жыл бұрын
Henley Higgins thank you so much you are very kind 😊 it’s the comments like this that keep me going. Thanks for the vote on the Sctambler build, I’m hunting for some cheap parts at the moment for it :)
Tracker/scrambler project would be awesome.
@CafeRacerGarage
6 жыл бұрын
Thank you mate I'm up to 15 yay comments so far so that is cool
I would love to see that scrambler build!!!!
@CafeRacerGarage
6 жыл бұрын
Wayne Martinez thank you for letting me know, it’s looking like a positive so far
A Scrambler to travel all the Baja.
@CafeRacerGarage
6 жыл бұрын
Irak Marin that’s a big adventure lol 😂
YES for challenge video
Yay on low budget scrambler
Great vid, what a process. Sub'd 👍🏼
Great job!
@CafeRacerGarage
6 жыл бұрын
Thank you Tom, I may need to add your handy work to this build as well :) wish you had a business or something for me to shout out. Hows the logo designing going?
Scrambler!!!!!!!!!!
@CafeRacerGarage
6 жыл бұрын
Hi Peter, thank you for the comment and vote :) how are your boys doing?
@pkck97
6 жыл бұрын
Cafe Racer Garage all good man. Work and baseball has us bogged down. We are going to watch your new video together tonight. Keep it up. Love them!!!
@CafeRacerGarage
6 жыл бұрын
Peter Kowalinski thank you Peter for your support and comments ;) means a lot
Yeah...big time. I just bought a CB 400F that I will have to make pretty as well!!! :)
@CafeRacerGarage
6 жыл бұрын
zimba599 sounds good, thank you for the comment, it’s looking like a yes, I’ve been flooded with comments about doing it :)
Great job! Good instructional video. Keep it up 👍
@CafeRacerGarage
6 жыл бұрын
Thank you so much mate, I love to know I'm helping, any questions just ask
Yea! Scramble that CX!
@CafeRacerGarage
6 жыл бұрын
Thank you for the comment and vote Psycrow :)
That sounds like an interesting challenge. As I seem to have fallen into a financial spiral with my current project.
I,d watch a series on a $1200 or close rebuild thanks mate.
Yes thank you, to the CX500 build!
@CafeRacerGarage
6 жыл бұрын
Bogi Jónsson thank you Bogi I appreciate you letting me know. It’s looking good so far :)
Coming along nicely mate
@CafeRacerGarage
6 жыл бұрын
Can't work out why I missed this comment, Thank you Andy, I really enjoy your videos too :)
Yeeeee... go for it. Nice job
@CafeRacerGarage
5 жыл бұрын
Thank you mate :)
You could use some acetone to melt away the foam plug from the fibreglass body
Great process you took us through so far in this, Dan ... and I’d be in favor of the build as well. Would be a great additional learning process for me personally. Cheers. Getting cooler there yet?
@CafeRacerGarage
6 жыл бұрын
thank you Gary, Yeah is not too cold just yet but its coming, I always look forward to your comments on me videos :) I dont think you have missed one yet lol ;)
@garya3056
6 жыл бұрын
Cafe Racer Garage - I am just an eager, slow-learner here, Dan! 🏍👍🏍
Great video, very instructional, im about to tackle some thing similar, music between a bit loud, and the CX looks better as a cafe' not tracker
@CafeRacerGarage
6 жыл бұрын
Thank you for the feedback Grant that's awesome :) I have 2 CX's so one will already be getting the full cafe makeover and this is Scrambler/Tracker challenge on a $1200 budget :) just a bit of fun for the channel Nothing serious. thanks again for taking the time to comment, The amazing comments are what keeps me going week after week. So many amazing guys here :)
I'm all for budget builds, make the CX dream live!
@CafeRacerGarage
6 жыл бұрын
Justin Brown thank you Justin I hear you and thank you for your vote towards the next possible build :)
Great vid buddy and yes to the cx500 👍🏻
@CafeRacerGarage
6 жыл бұрын
Leith thank you neighbour 👍
Nice work mate! :-) A friend of mine made a hump out of an old helmet. Out with the interiour and cut it into shape. Nice idea! Of course we would like to see you make another bike! If you feel about those wheels on the cx as I do, they have to go. But no worries, keep the hubs! Yes, those "spokes" are bolted on. So instead of those ugly stamped pieces of sheet you make 2 rings that fit on the hub. On the outer fringe of that ring you make holes for proper wire spokes and a rim to fit! Works fine! Makes sense? :-)
Another great video man, enjoying your build! Can't wait to get mine looking like a bike again!
@CafeRacerGarage
6 жыл бұрын
Built By The Hand thank you mate, yes I know that feeling but building them is half the fun right :)
@builtbythehand3902
6 жыл бұрын
Cafe Racer Garage so true, already have ideas for the next one.
Hey man. Would love you see you building a tracker out of the CX! Love the vid's.
@CafeRacerGarage
6 жыл бұрын
Mark Chaloner thank you Mark, I will do a little more research but it’s looking good so far :)
Top Job mate !! Really impressive, well done..
@CafeRacerGarage
6 жыл бұрын
Paul Mcgeown thank you Paul, comments like this make the sharing process worth it so I thank you more for taking the time to let me know you are enjoying them and getting something from them :)
Nice work, be good to see the cx scrambler build 👍🏻
@CafeRacerGarage
6 жыл бұрын
Ryan Mills thank you for letting me know Ryan. Stay posted:)
In my head I'm saying compressed air mate........ Nek minut. Great job !!!!!
@CafeRacerGarage
6 жыл бұрын
Paul Bull haha that’s funny, yeah it worked very well I was surprised 😮 Thanx for the comment
Nice video, another method is to make your foam model, go to a fablab, 3d scan it and 3d print it.
@CafeRacerGarage
5 жыл бұрын
JM what the heck! that is awesome. 😊 I don’t know much about 3d stuff but I do know a guy that could help me with that :)
@melaniebemer
5 жыл бұрын
Cafe Racer Garage: yes indeed you should look into it. I did mine with a fablab (a free place full of technology like 3d printer and 3d lasers): 3d scan your model (or take a few pictures + fusion software, free). and then you can 3D print a plastic base (or 3D laser cut 3mm wood parts for the base) & 3D laser cut polyurethane (hard plastic foam like yoga mat) to make the hump. Cheers ;)
Really enjoying the Vid's. I would love to see if you can do a $1200 build on the CX
@CafeRacerGarage
6 жыл бұрын
Thank you B Rap I will work towards that CX Challange if enough people show interest, Thank you for the nice comment
Build the scrambler!
Would love to see the video of a scrambler build! Looking forward to seeing it
@CafeRacerGarage
6 жыл бұрын
Olie Burton thank you mate, so far I think I may take on the scrambler/ tracker build challenge, looks good :)
@OlieBurton
6 жыл бұрын
Cafe Racer Garage Nice! It would be good to see. $1200 budget doesn’t seem like a lot. How much do you think your up too on your bike at the moment? I’m half way though a xs650 build and have spent easily 2K GBP. I have got with a M-Unit Blue and some other fancy bits that really added up.
@CafeRacerGarage
6 жыл бұрын
Olie Burton I really don’t know how much the 750 has cost me but I have kept all receipts to add up at the end. $1200 is a low budget and I guess it will be a massive challenge. :) xs650 would be fun to work on, what style you going for?
Yay !
@CafeRacerGarage
6 жыл бұрын
Thank you for your vote Bintang :)
Let’s see the scrambler build!
@CafeRacerGarage
6 жыл бұрын
Hi Luke Thank you for your comment and vote, Its looking positive so far :)
Your so amazing dude..
@CafeRacerGarage
4 жыл бұрын
Thank you mate, I hope you got something from the video :)
Great video and thank you! Do you need to apply a layer of wax to the mold before applying the gel for final product? I don’t see that on your video and looks like you applying the gel without any wax or easy remover layer? Also you using a blue/ greenish liquid (10:46) after you sing gel? What’s that? Thanks again
@patrickufkes
3 жыл бұрын
Same question here
cx500 build would be awesome
@CafeRacerGarage
6 жыл бұрын
beardnbiker thank you for letting me know :) it’s look good so far :) sooooo many comments
Great video! I'm in the middle of a seatpan build myself. No prior experience with this part of my build. Question... What would be the potential downside of simply making your initial mold the final piece c working on smoothing the outside rather than the inside? I have a boatbuilder friend who I've been debating this with and would love your thoughts. Keep up the great work!
@CafeRacerGarage
6 жыл бұрын
Great Question and I have the answer for you in part 3 next Sunday. short answer is yes, you are correct tho, it's posable to just smooth the outside and have that as your final part, I just wanted to show the full process. any questions just ask.
Do the Srambler build!
Hey great project, and A1 vid, i have subscribed! Here is a thought. Why not turn the engine around 90° in the frame so it becomes slimmer and can then also convert direct to chain drive 🤔
hey mate, I absolutely love the videos, and are about to try it out myself. I was wondering about the gel-coat. Do you put the fiberglass and polyester on the gel-coat when it's still wet, or do you let it cure? Regards!
@MikeMitchum
3 жыл бұрын
Did you ever try this? What's the answer?
yay!
@CafeRacerGarage
6 жыл бұрын
Thank you mate, stay tuned but Its looking good so far
Not a fan of the cx500 engine configuration but anything to keep the content coming and always enjoy the fab work
@CafeRacerGarage
6 жыл бұрын
That is a very dam honest comment and I respect that brother. I love the fact we are so different yet still love riding :) plenty of fab work to come ma man :)
Yaaa
@CafeRacerGarage
6 жыл бұрын
Thank you for your vote Bryson :)
Can you recommend any sander like the one you are using?
Did you sand the bondo by hand? Im about to bondo my seat as well
A challenge build and riding adventure! Please do! That sounds awesome! (Dirt Every Day style)
@CafeRacerGarage
6 жыл бұрын
So cool to know you will enjoy the whole process, Ive been planning the camping adventure trip with my good friend before the build has even started lol. I hope to start the build soon
An official YAY vote for the $1200 CX build.
@CafeRacerGarage
6 жыл бұрын
Thank you Scott :)
Please do the CX500 it would be a great project.
@CafeRacerGarage
6 жыл бұрын
Alan Bratton parts are arriving for it now :) having trouble finding an 18” wheel for it tho. The search is on. Thank you for your comment and vote Alan :)
Hi I was sent here from 'Classic Octane' . Like your work. I'd like to make the seat of my Zx10 a solo seat, do you think I could make something like this, but using the seat itself as a mould. Maybe by covering the seat with cling film, or do you think it would damage the seat? Cheers
In the states we call it a Dirtbag challenge, But where you buy the bike and build it for under 1000 dollars and take it on a hundred mile ride
CX500's are the best... DO IT! im getting a GL400 shortly...
@CafeRacerGarage
6 жыл бұрын
Alec Lewis that’s awesome Alec thank you 😊
Please make the scrambler video, it would be very interesting.
@CafeRacerGarage
6 жыл бұрын
Mr 0. Ok 👌 thank you for your comment brother :)
CX Scrambler
What did you place in the middle of the seat. Between the 90 degree metal side pieces to be able to have a flat surface to fiberglass
CX 500, yea
Hey mate, Really good video. The only thing that I do not understand is why you didn't use mold that you get in first place (10:20) but instead you lay few more fibre glass layers inside that mold and then removed new shell from inside and you end up with two almost identical parts ( 11:19)? Cheers
it would be cool to see that $1200 bike challenge
@CafeRacerGarage
6 жыл бұрын
Richard Ricketts I’ve now started it and first video will be coming soon👍 It’s going to be a massive challenge that’s for sure 😬 I love a challenge tho
Question mate. Before you lay the glass it looks like you paint on another coat of what you call flow-coat (gel coat w/wax). Do you add hardening agent to that coat and do you let it dry prior?