CAD Design for Organic Form in Rhino 6: Jewelry CAD Design Tutorial #81
In this tutorial, I will show you a simple way to do the organic form without any plug-in, and discuss the surface modeling concept in the video.
👉 SIGNUP NEWS LETTER: goo.gl/2orjKi
👉 SUBSCRIBE: goo.gl/MJ4ExU
👉 INSTAGRAM: goo.gl/e3SuF5
👉 FACEBOOK: goo.gl/QNuE2a
👉 WEBSITE: www.pjchendesign.com
👉 Collaboration: pj@pjchendesign.com
PJ Chen Design Channel is about sharing Rhino 3D tutorials to students and professionals learning various Rhino 3D techniques.
For more training course information that PJ Chen Design provides, Please visit our website at www.pjchendesign.com
★☆★ If you found this video helpful, help me to spread the word by liking or commenting below. It helps me to reach more people and allow me to create more videos!
★☆★ You can help me to improve and grow the channel donating a tip here: goo.gl/eXvQtK
All the donations are greatly appreciated. The fund will go to improve the channel video quality and my time to create videos to share.
Пікірлер: 221
Большое спасибо за то, что так щедро делитесь знаниями! Всего Вам доброго!
@PJChenJewelryDesign
Ай бұрын
You are very welcome. Hope you enjoy rest of my videos as well.
Thank You PJ. I always enjoy watching and learning new techniques in Rhino!!!
@PJChenJewelryDesign
5 жыл бұрын
You are welcome, Tim.
You are a rhino wizard!!! Thank you for these wonderful videos PJ!!
@PJChenJewelryDesign
5 жыл бұрын
You are welcome!
Hi Pj Chen, I just wanted to say, You are THE BEST OF THE BEST! The way you explain commands and problems is all-inclusive. Thank you!
@PJChenJewelryDesign
4 жыл бұрын
That is super. I am glad you like my video. Check out others, you may find a lot of useful information.
The greatest Rhino teaching channel I have ever seen!
@PJChenJewelryDesign
5 жыл бұрын
thank you !
Thanks, PG. The information about rebuilding the curves as well as the use of the control points for forming the shape and also the use of offsetting the curve instead of the surface are all such good basic things to know and use.
@PJChenJewelryDesign
5 жыл бұрын
You are welcome, Ron! Haven't see your comments for a while. welcome back!
Thank you PJ! I have a lot to learn with making organic models so this helps a lot :)
@PJChenJewelryDesign
5 жыл бұрын
That is great. You are welcome, Nicolle.
Thanks for tip on rebuilding as well as offset the curve instead of the surface! Great advice
@PJChenJewelryDesign
5 жыл бұрын
I was happy when I figure out that too.
Thank you so much for all your rhino videos PJ! Really really grateful!!
@PJChenJewelryDesign
10 ай бұрын
My pleasure!
This one is so amazing! Just solved some problems bothered me so long! Thank you so much!
@PJChenJewelryDesign
5 жыл бұрын
You are very welcome!!
awesome tutorial! thank you so much
@PJChenJewelryDesign
Жыл бұрын
You're very welcome!
Thanks for the tutorial! Always super interesting and clear!
@PJChenJewelryDesign
4 жыл бұрын
Glad you think so!
Thank you, PJ, I really like the way you teach, it is very thorough.
@PJChenJewelryDesign
4 жыл бұрын
You're very welcome!
Simple, straight to the point and what I needed, thanks a bunch
@PJChenJewelryDesign
10 ай бұрын
super!
Genius!! I now know I have been not rebuilding degrees to match. Thankyou so much!
@PJChenJewelryDesign
4 жыл бұрын
Happy to help!
A lot of great and important tips in this video. Definitely a GEM !
@PJChenJewelryDesign
Жыл бұрын
Super! Glad you like it!
Thank you! Your videos have been very helpful and you are a great teacher too.
@PJChenJewelryDesign
3 жыл бұрын
Glad you enjoy it. check out more videos at membership!!
You are amazing ! such clear explanations ! your channel deserves way more views !!!
@PJChenJewelryDesign
4 жыл бұрын
Thank you Rainer! Glad you like it. please share my channel!
i loved your tutorial works. it's really explanatory. and ive learned many tricks thanks to you ! thanks a lot !
@PJChenJewelryDesign
4 жыл бұрын
Glad to hear that!
Thank you for your thoughtful approach to teaching rhino. We learn from your mistakes and you process. Excellent reminder to REBUILD, and this very good use of loft.
@PJChenJewelryDesign
3 жыл бұрын
You are so welcome
Thanks for the tutorial. You explain the reasons how and why commands work and that is very helpful
@PJChenJewelryDesign
5 жыл бұрын
You are welcome. I am happy to know you find the video useful!
wonderful tricks. well explained!
@PJChenJewelryDesign
Жыл бұрын
Glad you liked it!
Great video. I liked the tips on rebuilding and offseting curves instead of surfaces. I undestand why I had issues on some of my objects.
@PJChenJewelryDesign
4 жыл бұрын
that is great!
Awesome video! I always learn at least one trick from everyone of your videos.
@PJChenJewelryDesign
4 жыл бұрын
Glad to hear it!
PJ - Excellent tutorial. I always learn something new from your tutorials
@PJChenJewelryDesign
5 жыл бұрын
Happy to hear that Roger!
thank you again PJ, A very interesting tutorial!!
@PJChenJewelryDesign
5 жыл бұрын
You are welcome Josja.
Excellent video PJ. Thank you for your time and expertise.
@PJChenJewelryDesign
5 жыл бұрын
You are very welcome, Karen.
THANX A LOT!! your tutorials are amazing!
@PJChenJewelryDesign
3 жыл бұрын
You're very welcome!
Thank you. J;apprends toujours avec vous. Merci PJ
@PJChenJewelryDesign
5 жыл бұрын
that is awesome!
Great video once again! Thank you!
@PJChenJewelryDesign
3 жыл бұрын
My pleasure!
Thank you so much for sharing! An interesting and creative way to create organic the shape using basic Rhino commands. :)
@PJChenJewelryDesign
2 жыл бұрын
Glad you liked it!
I'm an architect and I learnt a lot from your tutorials. Thank you so much!
@PJChenJewelryDesign
3 жыл бұрын
Gold they help!
That is just SUPER!!!
@PJChenJewelryDesign
3 жыл бұрын
Glad you like it
Great example of how the REBUILD works! 😀
@PJChenJewelryDesign
Жыл бұрын
Glad you liked it!
Awesome tips PJ...!!! Thanks...
@PJChenJewelryDesign
5 жыл бұрын
You are welcome Isaac!!
Thank PJ . I always enjoy of your useful tips
@PJChenJewelryDesign
5 жыл бұрын
Great to hear that!!
Thank you very much PJ for your tutorials, they are the best to learn how to model jewelry with Rhino that I found on youtube. One query: joining and reconstructing the curve so that later on, it will not be great for problems, but whenever you rebuild, it gives you many more control points (something that we supposedly should avoid in Rhino) and the second thing I observe is that Reconstructed curve is no longer as perfect as the original. Thanks, teacher!
@PJChenJewelryDesign
5 жыл бұрын
that is true.
thx PJ ...it was very useful.
@PJChenJewelryDesign
3 жыл бұрын
Glad to hear that!
Very clear and direct. Thank you.
@PJChenJewelryDesign
5 жыл бұрын
You are welcome!
這些指令說明得很清楚 相當實用 謝謝你
@PJChenJewelryDesign
5 жыл бұрын
CJ Chien 不客氣喔!
You are so good teacher. Thank you. 👌🌞
@PJChenJewelryDesign
Жыл бұрын
You are so welcome!
Nice as always
@PJChenJewelryDesign
3 жыл бұрын
Thanks!
Thank you PJ. I am grooving with you
@PJChenJewelryDesign
3 жыл бұрын
Rock on!
Thank you for the videos and tutorials are realy helpfull and looking forward for more 🙏
@PJChenJewelryDesign
5 жыл бұрын
that is great! and welcome to my channel!
Very interesting...thank you pj
@PJChenJewelryDesign
5 жыл бұрын
You are welcome, Anees.
you the best pj
@PJChenJewelryDesign
3 жыл бұрын
Thank you!
great way to modellize this shape...thanks
@PJChenJewelryDesign
4 жыл бұрын
You are welcome, Emrah!
Very helpful tutorial PJ thanks
@PJChenJewelryDesign
5 жыл бұрын
You are welcome, John.
Awesome video, I learned a lot! Thanks
@PJChenJewelryDesign
5 жыл бұрын
that is great!
Thanks a lot. Very useful and interesting.
@PJChenJewelryDesign
3 жыл бұрын
You are welcome!
Excellent video, Thank you
@PJChenJewelryDesign
4 жыл бұрын
You are welcome!
Thanks for sharing.
@PJChenJewelryDesign
Жыл бұрын
Thanks for watching!
Simply amazing
@PJChenJewelryDesign
4 жыл бұрын
Glad you think so!
O my god you are a great teacher😭😭😭thanks a lot
@PJChenJewelryDesign
3 жыл бұрын
You are very welcome. Please tell all your friends about my channel!
Thank you a lot!!
@PJChenJewelryDesign
2 жыл бұрын
You're welcome!
Thanks PJ
@PJChenJewelryDesign
2 жыл бұрын
You are welcome
thank you so much!!!
@PJChenJewelryDesign
2 жыл бұрын
You're welcome!
Very helpful Video sir
@PJChenJewelryDesign
5 жыл бұрын
Glad it helps!
it helps me a lot to understand. thank you
@PJChenJewelryDesign
Жыл бұрын
Happy to hear that.
great tutorial Thanks
@PJChenJewelryDesign
5 жыл бұрын
You are welcome, Michael!
Thumbs UP PJ!!!
@PJChenJewelryDesign
5 жыл бұрын
Thank you Ani
wonderfull..
@PJChenJewelryDesign
3 жыл бұрын
Gold you like it!
So good
@PJChenJewelryDesign
5 жыл бұрын
Thank you
Good lesson
@PJChenJewelryDesign
3 жыл бұрын
Thanks! 😃
Very good! Thank you!
@PJChenJewelryDesign
5 жыл бұрын
You are welcome, Hugo!
Thanks a lot!!!
@PJChenJewelryDesign
3 жыл бұрын
You're welcome!
Thank you!
@PJChenJewelryDesign
3 жыл бұрын
Welcome!
o sea Chen te amo!!!
@PJChenJewelryDesign
3 ай бұрын
Happy to know you like my video!
Cool....Cool....!!
@PJChenJewelryDesign
4 жыл бұрын
Thanks
the bottom is funky!!
@PJChenJewelryDesign
5 жыл бұрын
When you have blend the surface and if the original surface you blend from has bump. then you will have bump. you can always use cap. or flat bottom.
tank you PJ
@PJChenJewelryDesign
5 жыл бұрын
You are welcome!
My all work in gold jewellery deisgn Sir.....
gracias
Nice
@PJChenJewelryDesign
5 жыл бұрын
thanks!
Thank you
@PJChenJewelryDesign
3 жыл бұрын
Glad you like it
Thank you so much =)
@PJChenJewelryDesign
3 жыл бұрын
You're welcome!
Thanks a lot sir 😊
@PJChenJewelryDesign
5 жыл бұрын
You are welcome!
thank you
@PJChenJewelryDesign
2 жыл бұрын
You're welcome
Thank you master
@PJChenJewelryDesign
5 жыл бұрын
You are welcome!
I really like all your videos. you Design on Rhino but for me i design on Matrix 8 ... Good and keep move to the future... Good Luck
@PJChenJewelryDesign
5 жыл бұрын
thank you!
Amazing....!
@PJChenJewelryDesign
5 жыл бұрын
Thanks, Alejandro. Cannot wait to see you use this method to build something.
@janourzua
5 жыл бұрын
@@PJChenJewelryDesign you' ll see....soon ..thxs
The video is great !
@PJChenJewelryDesign
5 жыл бұрын
Thank you.
Thank you alot! Can you please post more videos about organic forms in jewelry design? Many thanks in advanced
@PJChenJewelryDesign
5 жыл бұрын
You are welcome, Niazi. More videos to come.
Thank you sir
@PJChenJewelryDesign
5 жыл бұрын
You are very welcome!
At time 2:26 it looks like a smiley face and that made me smile.
@PJChenJewelryDesign
Жыл бұрын
🤣
Supper
@PJChenJewelryDesign
3 жыл бұрын
Super
Your tutorials are among the best I have seen, thank you. One question for you, at 10:20, what is your preferred method to set the gumball to the absolute center of the shape? Odd-numbered star shapes always suffer from non-centered pivot points as the center of the bounding box for the selected items is not the same as the center of the star-like shape. Curious about what your approach would be.
@PJChenJewelryDesign
Жыл бұрын
It depends on what you like to center with. the area, volume, distant? it can be all set up in rhino. for example. if you like to center by distant. you can always draw a curve and snap in the middle.
Thanx
@PJChenJewelryDesign
2 жыл бұрын
No problem
多謝!
@PJChenJewelryDesign
5 жыл бұрын
Harry Wong 不客氣。歡迎你來到我的頻道
Thank you PJ! I have a doubt , when I switched on the points it only appeared on the top and bottom of the loft , mine didn’t have any in the center.. is there a reason why ?
@PJChenJewelryDesign
5 жыл бұрын
maybe to try rebuild and make sure degree is 3
Hello pjchen I can’t open the control point on the surface just like your video at 10:13. What’s wrong with it? Thx
@PJChenJewelryDesign
5 жыл бұрын
if the surface is polysurface, it won't work.
Can you please show us your material and render settings? It looks great! thanks.
@PJChenJewelryDesign
4 жыл бұрын
I have keyshot rendering tutorial on the playlist. It shows all my setting for the keyshot rendering.
I just want gold effect (color) on object sir
sir tell me this last one you just told me about closed solid polysurface and this effects on object like gold pattern sir?
@PJChenJewelryDesign
4 жыл бұрын
not quite understand your question?
@sachingbari
4 жыл бұрын
@@PJChenJewelryDesign sir it meant ( CLOSED SOLID SURFACE) Which showing gold effects sir
i have this question what is the minemum offset for surface for good casting i work with resin
@PJChenJewelryDesign
4 жыл бұрын
It depends on the design. what is the design look like.do you have image
@abdengineer6225
4 жыл бұрын
@@PJChenJewelryDesign yes how can i send photo
hello sir pls help how did you render this looking so real. . . .
@PJChenJewelryDesign
5 жыл бұрын
I use Keyshot for rendering.
How can you close the surface above and below? That it becomes more solid
@PJChenJewelryDesign
4 жыл бұрын
blend surface
PJ, are you ok? I hope you're well. What can I say about your tutorials? Show, perfect, sensational. My sincere thanks. Thank you, always. Success for you.
@PJChenJewelryDesign
5 жыл бұрын
Thank you Gabriel!!
How to use this model for product manufacturing just as inventor and fusion360
@PJChenJewelryDesign
5 жыл бұрын
Rhino doesn't have that function. Does anyone in this channel have better tips on this question?
Why not use sweep rail2?
@PJChenJewelryDesign
3 жыл бұрын
There is always more than one way to model the same model