Paul, please change the title of this video so people who search for instructions on manometer installation could find it easily. I'm not the only one who has trouble to find it. BTW, I'm really happy with my Robot and I'm happier now that I have manometer installed in it. ;)
@desimanable4 жыл бұрын
thank you for these videos, when i buy my robot later this year, This is so helpful!!!
@jakobw135 Жыл бұрын
Does Cafelat make a 57.5mm portafilter basket? Can you get a COFFEE SCREEN without the silicone center-piece?
@adiswen11 ай бұрын
i buy a regular cafelat robot, can i make the installation pressure gauge to be barista mode ?
@davidhunternyc15 жыл бұрын
I just got my lovely Cafelat Robot. I have never used a manual lever machine before and I have been using the Robot now for just a few days. One thing I can't seem to get the hang of yet: I can not pull an even, consistent shot of espresso without channeling or spraying. My coffee always tastes bitter too. I am doing something wrong.
@porkchopspapi5757
5 жыл бұрын
Where did you buy it? I can't find any info on sales.
@jpmumbly
4 жыл бұрын
All is related to coffee beans and especially grind size. Depends where they are from. Supermarket? Local coffee roasters? Who did the grinding. Try to vary the grind size. Worked for me. Needed a real fine espresso size. Too fine and the water takes too long to pass. Too coarse and the water goes through too fast.
@jpmumbly
4 жыл бұрын
Unfortunately the metal sleeve design is flawed as it got trapped against the robot body. This has squeezed the plastic tube completely and removed it from the piston chamber. A slick or smooth sleeve design would be better to avoid getting caught. Now I removed it. It works but doesn't look as good as with the metal sleeve.
@SantiagoLuz
4 жыл бұрын
@@jpmumbly Did you have the "self-adhesive backed aluminium cable tie " installed to guide the metal sleeve?
@mescellaneous4 жыл бұрын
I love you Paul
@cslimtube2 жыл бұрын
What type of tube using.? As I see it ..wasn't silicone tube.if it's polyurethane...it will give u trouble in time.it will crack ! I will change the tube and lever mounting to the tube.use swivel fitting.
@janmejaymahapatra5163 Жыл бұрын
Is this product available for India??
@LGTVQHD
Жыл бұрын
Haan
@janmejaymahapatra5163
Жыл бұрын
@@LGTVQHD tell me how to purchase it and it's price??
@LGTVQHD
Жыл бұрын
@@janmejaymahapatra5163 cafelat ki site se Shayad 28 ya 32k ki padegi
@LGTVQHD
Жыл бұрын
@@janmejaymahapatra5163 agar physical kaam karna pasand hai to you can buy otherwise I'll suggest semi-automatic. A good semi-automatic will cost around 60k. One more thing Making espresso is very easy but agar kuch aur karna hai like latte ya cappuccino then it takes time because tumko fir milk steam karna padega
Пікірлер: 17
Paul, please change the title of this video so people who search for instructions on manometer installation could find it easily. I'm not the only one who has trouble to find it. BTW, I'm really happy with my Robot and I'm happier now that I have manometer installed in it. ;)
thank you for these videos, when i buy my robot later this year, This is so helpful!!!
Does Cafelat make a 57.5mm portafilter basket? Can you get a COFFEE SCREEN without the silicone center-piece?
i buy a regular cafelat robot, can i make the installation pressure gauge to be barista mode ?
I just got my lovely Cafelat Robot. I have never used a manual lever machine before and I have been using the Robot now for just a few days. One thing I can't seem to get the hang of yet: I can not pull an even, consistent shot of espresso without channeling or spraying. My coffee always tastes bitter too. I am doing something wrong.
@porkchopspapi5757
5 жыл бұрын
Where did you buy it? I can't find any info on sales.
@jpmumbly
4 жыл бұрын
All is related to coffee beans and especially grind size. Depends where they are from. Supermarket? Local coffee roasters? Who did the grinding. Try to vary the grind size. Worked for me. Needed a real fine espresso size. Too fine and the water takes too long to pass. Too coarse and the water goes through too fast.
@jpmumbly
4 жыл бұрын
Unfortunately the metal sleeve design is flawed as it got trapped against the robot body. This has squeezed the plastic tube completely and removed it from the piston chamber. A slick or smooth sleeve design would be better to avoid getting caught. Now I removed it. It works but doesn't look as good as with the metal sleeve.
@SantiagoLuz
4 жыл бұрын
@@jpmumbly Did you have the "self-adhesive backed aluminium cable tie " installed to guide the metal sleeve?
I love you Paul
What type of tube using.? As I see it ..wasn't silicone tube.if it's polyurethane...it will give u trouble in time.it will crack ! I will change the tube and lever mounting to the tube.use swivel fitting.
Is this product available for India??
@LGTVQHD
Жыл бұрын
Haan
@janmejaymahapatra5163
Жыл бұрын
@@LGTVQHD tell me how to purchase it and it's price??
@LGTVQHD
Жыл бұрын
@@janmejaymahapatra5163 cafelat ki site se Shayad 28 ya 32k ki padegi
@LGTVQHD
Жыл бұрын
@@janmejaymahapatra5163 agar physical kaam karna pasand hai to you can buy otherwise I'll suggest semi-automatic. A good semi-automatic will cost around 60k. One more thing Making espresso is very easy but agar kuch aur karna hai like latte ya cappuccino then it takes time because tumko fir milk steam karna padega
@janmejaymahapatra5163
Жыл бұрын
@@LGTVQHD ohk... Thank You