Hey man, thanks for taking the time to do this video-- you probably saved me from getting a headache with the bunch of features. Thanks again.

Enjoyed Video - Thank You for being so Thorough in your descriptions!

Thank you for the instructions on the C500. I don't know if I chose it after watching this, or I found this while I was waiting for my HUD to be delivered. I couldn't understand the printed instructions which looked like it was in German, so this video was super helpful.

Thanks for the tutorial…… I was a little confused with the instructions booklet 👍🏽

Your channel is very informative and helpful. Thank you!

How to set /adjust the clock / time, it's NOT via the Settings menu: 1) Ensure HUD is running as normal (not in Settings menu) 2) If clock not displayed already, short press side button to select clock mode, then long press side button till clock flashes 3) Push / nudge the side button "up" to adjust minutes, short press side button to adjust hour 4) Long press side button (around 5s) to save and exit

@michellazarenko3

2 жыл бұрын

Wait.. long press switches it to Menu mode. So it does not allow changing time :-(

@SonicOrochi

Жыл бұрын

@@michellazarenko3 Hold UP/towards screen instead of pressing in.

This man did the best instructional video that I have ever seen.

Thanks for your video I have issues getting it to work on my bmw g21. Is there settings blocking reading from odb2 port?

Thanks for the config tutorial! Very useful friend!

GREAT VIDEO helped me out a lot my instructions are in German

Hola , sabes si hay algún head up display que lleve los intermitentes incorporados?, gracias

Thanks 🙏🏻

The rpm shown as numbers seems to be an eyesore.

Decent review. I like this one better than most, having it's own screen is a better idea than sticking crap on your windshield that eventually gets scratched from cleaning and probably doesn't switch well between vehicles if you want to move it. I already have an accurate speedo and a GPS so I don't need speed and I sure don't need speed warnings because I already know when I'm breaking the speed limit. I want engine info, especially temp since the car doesn't have a reliable gauge.

Is there a specific dual OB2 connector that will power both this unit and dash cam at the same time. I’ve been finding adaptors however non seems to power both devices at the same time?

Hi! I adjusted the value on 13.2 volts but it doesn’t turn off automatically, any suggestions ? Thanks !

LCD brightness is better than HUD H400, but LCD response is somewhat slower.

dial2fast, I bought the H401 for my Buick that has OBD2 and It wont read water temperature,

Hello, I have the same HUD C500, I plugged it into the 2008 is250 obd interface, started the car, I saw a large number of fault lights on the dashboard, I plugged it into the 2017 crv obd interface, started the car, there was no fault code on the dashboard, but the HUD speedometer It doesn't work, I want to ask what's going on?

Anyone know if enaop m40 have influence to the Original Car Waranty because of using the OBD 2 Port

How can I set the alarm for the water temperature?

Is it fit for Mitshubishi Lancer Ex?

I tried without turn on the motor and the little red leds indicators turn on consecutively, is necessary to turn on the motor to c500 works?

Très bonne vidéo, dommage que les commentaires ne soit pas en français !

Très bonne vidéo, dommage que les commentaires ne soient pas en français ! (il y avait une grosse faute dans mon précédent message).

I am using the same model, do you feel there is a little delay between the dash speed and the HUD speed? About 1 to 3 seconds

@Shadow-jg2du

2 жыл бұрын

Im thinking about buying this product what do u think does it worth it?

My car is a Nissan Sunny (Sentra) YOM:2000. Data doesn’t show up in my hud. Only the Power supply. I checked with a electrician he told me to get the pin data of the obd2. Could you please provide it

Wonderful presentation. Please let me know how to set the clock.

@nchia

2 жыл бұрын

See my other comment.

will it work on Toyota Prius 2006?

Very helpful! How do you set clock?

@nchia

2 жыл бұрын

See my other comment.

Can this unit also clear fault codes?

Does it come in wireless?

Hi friend, I have a doubt, how could I set the clock with current real hour? Best regards

@nchia

2 жыл бұрын

See my other comment.

Здравствуйте, можно ли уменьшить яркость?

Hopefully the you can convert KM to MPH.

How to change the clock settings? Thanks

@nchia

2 жыл бұрын

See my other comment.

comment faire pour régler l heure ?

Can i set the clock

How to set the clock?

I need this device. Live in Karachi, Pakistan. Can anyone help me out for this?

I bought this same item for speeding when I drive 15 mile per hour the machine showed me 10 mile per hour I put it on mile system aswell wich is 5 mile different can u tell me how to adjust it? Thank you

@nchia

2 жыл бұрын

In the Settings menu, you can adjust in menu no. 0 as per the video.

@shubhamsoni3298

Жыл бұрын

@@nchia does It drains battery when car engine is off .. Pls answer

@nchia

Жыл бұрын

@@shubhamsoni3298 The screen powered off within a minute I think after switching the car off. I suppose it depends on how much power your car provides your OBDII port. If you were to leave the car for more than two weeks, you might want to unplug anything that could drain the battery.

@shubhamsoni3298

Жыл бұрын

@@nchia thanks

Is it possible to turn off all the clutter and just have the speed displayed on its own?

@haraldrubenach4055

4 жыл бұрын

Maybe Menu 7 can do this for you.

@nchia

3 жыл бұрын

Yes, just keeping changing the display options till you find it.

Can this read fault codes?

@hunter19884

5 жыл бұрын

NO it's not an engine code reader.

9:25 remix!

Any OBD-II device presents a major problem for my 2015 Ford Focus SE Hatchback. I have to pull down a rectangular hatch to access the OBD-ii port. After I connect a device, I can't close the hatch; it hangs down, and I have to be very careful entering and exiting the car. I'm not about to break the hatch.

@kmg501

5 жыл бұрын

Use a hole saw to put an inconspicuous hole on the underside of the dash to plumb the connector through. Just be very careful to not go so deep that you damage something behind this access hole you are making. This is a very common technique used in big trucks in order to connect elog devices. With proper care it is not a big deal and no one is going to care about an inconspicuous hole.

@mvlys

5 жыл бұрын

You can use the T900 model which uses an embedded GPS instead of ODB.

My understanding is that this unit, and indeed all HUD units that reads the speed via OBD2, is not as "correct" as GPS based units. So it's good in that is should "match" the dashboard, but not "true" speed.

可以給我中文說明嗎？

Перевод