0:00 How to install 2:00 Overview of GUI 3:20 Change units used 3:58 Build basic rocket 3:58 Nose cone 8:24 Body tube 9:18 Inner tube 12:37 Fins 18:08 Motors 22:22 Stability / GP & CG 24:57 Parachute 25:39 Shock Chord 26:54 Simulations 30:11 Ending statement 34:11 2019 Competition Rocket

Wise words indeed: "You really do not want to disassemble your rocket mid-flight at a couple hundred miles per hour...."

Thank you so much for making the video. I had been at BYU, I used to live right behind the Provo Library, and never imagined BYU had a rocket club/organization. I didn't finish my major back then, but things happen for a reason; I am now studying aerospace engineering in California.

Great tutorial; I followed while designing the same thing with slight differences. Great Simulation results on G & H motors.

Nice tutorial! Great for those looking for a well-explained introduction! Thanks!!

Great video, at the end you say launching it after all the simulations is "probably" the best part, i agree good sir!!!

Thanks for the tutorial! A massive help for an upcoming project 👍🏼 🚀

@mediwise2474

Жыл бұрын

how to convert it in stl file for printing

Thank you so much for making this video. I've learned a lot of stuff in one single video.

Thank you for show all details.

@justthetwous314

4 жыл бұрын

Türkler youtube yorumlarını basmış dostum ne işin var burada :D

@justthetwous314

4 жыл бұрын

DAHA ÖNCE BU UYGULAMAYI KULLANDIN MI BİR DE CEVAPLARSAN SEVİNİRİM

@woosal-kc7tr

4 жыл бұрын

@@justthetwous314 asbdkoifcgasdyfas

thank u very much that was very useful

Awesome video, if I were to build a rocket large enough to make it to space, do I need faa approval prior to launch? Also same question in regards to FAA approval for a rocket flying higher than 400ft Agl?

Hello Mr. Ryan Garrison, I would like to know if we can use Openrocket for high altitude rocket simulation like launch vehicle application? also while modeling the rocket can we add our own rocket configuration or rocket (where all rocket parameters can be changed like dimensions, thrust, burn time etc.) to model exactly orbital launch event with design stages? Would love to have your feedback. Thank you.

Is there a book you can recommend to design a solid propellant rocket engine, along with formulas and explanations?

Hello, I would like to get closer to this world, I come from Italy and here it is a hobby that very few people do. I have been doing 3d printing for several years now, I would like to be able to make something to send up into the sky Thank you very much for the tutorials

Thank you very much sir Helpful

When we have the airbrake system, how to simulate the rocket for reaching accurate apogee using this simulation software?

I'm happy to follow your video, but I have a question and I hope for the answer: how to define the center of thrust of the rocket, before it slips into the fuselage of the mini rocket ??? please answer

Is BYU rocketry taking new students (only learned the basics of rocketry software like this) onto the team/ have a smaller apprentenship/introduction rocket team we may join to further explore rocketry?

Hello. No Launch lug? Or doesn't matter? is it possible to add two launch lugs in a row? or better one at the lower end of the rocket? Grüße, Ben.

Good tutorial, thx.

Grate video!

Very nice tutorial. QUESTION - I wondered how to add Aerotech RMS Motor Hardware (the Casing for the RMS Motors)? Is there a standard database of these casings, or do I need to start from scratch and add an inner tube?

@farcasdotpng

2 жыл бұрын

Nope. The RMS reloads luckily already have casings in the program.

Thank u so muchhhhhh man Just check out your channela and subscribed

you explain very well sir.

@mediwise2474

Жыл бұрын

sir can i get cad file of rocket ? can you help

Thanks a lot

for some reason everytime i run open rocket it opens fine but when i click on some parts for example the dropdown menu to select the views in the area where it desplays your rocket, it starts to start acting weird and it starts putting weird screens, kinda like of like the old windows XP error message dupicating thing, please help because this glitch wont stop and it messes me up when makeing a rocket

Thanks a bunch

Question - have you ever inputted an aluminum fin can into Open Rocket? If so, how did you structure it?

@byurocketry6869

4 жыл бұрын

Jack Caynon Assuming the fin can slides over your body tube, you can create a new body tube of the correct internal diameter, external diameter, and length to represent the “can”. Then use the position offset function to position it over your actual body tube. Finally, add the fins to this new “can” tube instead of your body tube.

@jackcaynon9746

4 жыл бұрын

BYU Rocketry Great answer! Thanks!

Question for you. I'm using clear acrylic fins so they will be sort of invisible since the real rocket I’m modeling after doesn't have fins... Do you know how in the appearance tab of the fins to assign no color, so they show up as just a dotted line or something similar?

@bennib3267

3 жыл бұрын

@Charles Holliday At 8.15 min there is an option in the menu called component line style. Thats probably it

@bombyhead

3 жыл бұрын

well if you add fins that arent visible in the simulation it will be more stable then the real life version if you dont add fins so just build how it is going to be in real life and simulate it

Can I ask a question? Is there a rocket type that its top filled with black powder ? or u're planning to add black powder apart from the rocket motor

@derrickwalker4423

2 жыл бұрын

This rocket is designed to use the ejection charge in the motor like you described. It can be disabled, but he keeps it at 9 seconds after burn when he is talking about motors around 20:00.

epic background

Can it be used for supersonic, Mach-2, Mach-3, aluminum?

@mustafasemihcoban909

4 жыл бұрын

No. This program is only for 0.8 mach and little velocities

Can we use this file to create stl file for 3d printing

may i know how learning Open Rocket will help me i am a 7th Grader

how do i download it from?

hi. I'm facing an execution issue regarding open rocket software. I have the latest java software. However whenever i download openrocket-15.03 from their website. It downloads the file in winrar format in my downloads section. To try fix this issue i tried using the notepad method but still no use. How can i solve this issue?

@burakciftcioglu2616

4 жыл бұрын

You can download it from here and install the app. That worked for me. Link: www.dropbox.com/s/dfpo0pzztgsscqf/OpenRocket-15.03-installer.exe?dl=0

@jamesmaddison4546

4 жыл бұрын

@@burakciftcioglu2616 you sir....are a god. Thannkkkk you

i think you have a company related to rocketry (BYU Rocketry). is it true ?

how many costed these meterials? PLEASE IT IS VERY IMPORTANT FOR ME

@amazingly1462

3 жыл бұрын

it would be there at rocketry website

@kaanturkover

3 жыл бұрын

This app is free but ı don't know other things Edit: Aa Türkmüşsün :D

sir plz give me ''open rocket link" and ''java link'' for windows 11.. I could not download ..

Which software does SpaceX use?

@zettysmango

Ай бұрын

MS Paint3D

how do we launch the rocket my son wants to see it

@mediwise2474

Жыл бұрын

Can we make stl file from this

12:20

Space cannons..

very helpful thank you