Thanks for this nice review. I also have the white version of this helmet. I am very pleased that it is light and comfortable.

Never fail to cheer me up 🥰 and a great review too!

Thanks for the vid Brandon 🎉

Great review Brendan, Happy New Year to your family and friends and all the best, cheers..

@BulletWanderer

6 ай бұрын

Thanks Les! All the best to you and yours too!

Great review of a good looking lid ... and you made me chuckle 👍

@BulletWanderer

6 ай бұрын

Thanks, glad it gave you a laugh 😆

Happy New year my friend, good review.

@BulletWanderer

6 ай бұрын

Thanks Janner, happy new year to you too!

thats how you make review on a helmet great job

Thanks for this Brendon ,get well soon.

@BulletWanderer

6 ай бұрын

Cheers Stuart !

Hi Brendan happy New year to you and yours..a perfect helmet for you the plastic clip on the end of your strap is universal. I have them on me Arai fullface and my Bell open face helmet i have never seen a metal one. I was going to go for a spin on my bike but the back roads are well dodgy with black ice. Looking forward to the next video kiddo. Ride and be safe Ron Evans.

@BulletWanderer

6 ай бұрын

Didn’t realise how foolish I sounded now saying that about the plastic clip 🙈 lesson learned haha Think it’s gonna be some time before we’re gonna be able to get out and enjoy the roads ice free . 🥶

I made a mistake there on the vents, you can open and close them 🙊 😂

Great review, been looking for a full face helmet with goggles strap on back of helmet, thank you..

Happy new year, keep the reviews coming, how about your vlogging set up ? I could always check back to see if I’ve missed one !

@BulletWanderer

6 ай бұрын

Can do a quick video on my vlogging setup! 😁 Don't think I've really done one thus far 👍

Howdy Brendan, first off, Get well SOON! I have one of the RE branded versions of this helmet and it's OK, but I actually prefer a standard old 3/4 helmet (that was red) to match a Goldwing I had but I figured, paint is cheap! So, I painted it OD Green to match Oddball. The swing up visor is great and it already fits well after shaping to my head over a couple of years. Your visor does induce some whistle into the GoPro. The slot between the visor and the helmet when the visor is not shut, (as evidenced in an intermediate position typically), essentially creates a whistle slot. My 3/4 helmet does this big time. So, it's either fully up, or fully down and it's fine. Rest up and get back out there. Daisy Bell misses you, and so do we! Cheers, mate!

@BulletWanderer

6 ай бұрын

Cheers Brian! Didn't know RE did a version of this helmet!

Great review there. It seems impressive value. I agree that bubble visors do look questionable. I just have the three for my Bell open face. I’m often laughed at 😂😂😂

@BulletWanderer

6 ай бұрын

Cheers Graham 😁 don’t get me wrong , I’d still like to try a bubble visor if I had the option 😆

@craigyllyn

6 ай бұрын

@@BulletWanderer I just posted on instagram just for you😂

Jasus Brendan…… I’ll never get Double D ring out of my mind now……thanks for that 😅

@BulletWanderer

6 ай бұрын

Sorry about that Mike 😂😂 It's what I always hear when i hear it so had to share haha

You convinced me on this helmet! Although I have to buy online, what is the sizing like? My crown is 58cm as an intermediate oval. I am wondering whether I should go medium or large? Their sizechart states I am a medium but Urban Rider size chart states I'm a large.

@BulletWanderer

6 ай бұрын

I hope you like the helmet! My head is 60/61cm depending on the day and the helmet, making me get an XL. The fit is comfy, I would say go for the Large if Urban Rider says thats 58cm. Even if its too big, you can always exchange it and size down. Hope that helps!

I really love the style of those by city helmets but they're pretty expensive to get over here in the states. I'm looking at other retro brands that are more available here 🍻👍

@BulletWanderer

6 ай бұрын

Plenty more similarly styled helmets out there. 😁 Affordable and safe are the main priorities 😆

Bonjour de France , Breudan je suis dans la règion du pas de calais, je poséde une 350j classic depuis 2022 j'ai 11000km, une moto plaisir à l'aube de mes 70 ans merci pour tes videos

@BulletWanderer

6 ай бұрын

Merci Laurent ! J'ai été brièvement dans la région du Pas-de-Calais pendant l'été 2022, mais j'aimerais beaucoup y explorer davantage. La Classic 350 est, je pense, la moto parfaite pour cela. Heureux que vous appréciez les vidéos !

Nice one been looking for a classic helmet how did you find the size ?

@BulletWanderer

6 ай бұрын

Size wise, I think they sneakilly borrowed my other helmet at the time, the HJC i70, and went for the same size, which was an XL 😅 Best off going the size guide from whichever website you buy it from I suppose!

Thanks for the review! In your review you say that there is not enough space to install bluetooth communications. I'm thinking of buying this helmet and installing Cardo Systems FREECOM 2X in it. Can you comment on this possibility?

@BulletWanderer

Ай бұрын

To be honest I'm not too sure. I only had Moman H2's installed in this for a time, but I'd imagine the ear pieces were roughly the same size, it was quite a tight fit as it doesn't have any sort of recess for ear pieces. I am able to use a single wireless earbud in the helmet though, if the Cardo is able to connect to wireless earbuds? Although then you might lose the microphone ability 🤷‍♂️ Might be better off looking into other similarly styled (but more expensive) helmets like the Shoei Glamster?

Where can you get those reflective stickers you have on it? I like how stealth they look - you can barely tell they are there.

@BulletWanderer

5 ай бұрын

Great, aren't they? They do reflect as well, so best of both worlds! I got mine from xlmoto: www.xlmoto.ie/product/course-reflective-sticker-black_pid-PIA-223882 Hope that helps!

Bonjour Brendan,si tu retourne en France, je serai heureux de te rencontrer, prends soin de toi Laurent.

Hi. I'm wondering about the visor pop-in studs on this helmet. I like the look of the helmet but the pop-in studs which hold the visor down are giving me pause. Have you found that the studs have gotten looser over time, or that the visor itself has deformed?

@BulletWanderer

3 ай бұрын

I'll be honest, since fitting my camera mount to the helmet, I haven't been able to hold the visor down. Not a fault of the helmet, just the mount is slightly too big. Aside from that, the visor hasn't deformed or anything, and stays down when I have it down, opens when I open it fine. That being said, on occasion the studs did rattle with the visor open, but just tightening them by hand, they'd be fine again. Hope that all helps!

thanks man ,may i ask , what size do you take.?

@BulletWanderer

10 күн бұрын

I believe it's an XL size, as I have an XL head 😂

“Double D all the way, don’t read into that statement.” 😂

@BulletWanderer

3 ай бұрын

😂

Hey! What can I do against a fogged visor? I'm used to Pinlock...~

@BulletWanderer

29 күн бұрын

@@Liewie honestly it hasn’t fogged up on me yet; it doesn’t hermetically seal like other helmets do, so there should be no issue that way 😁 at least in my experience

You said the air flow is great but that is exactly what worries me. At the store they told me that the wind could be annoying on long rides. What do you think?

@BulletWanderer

Ай бұрын

For most of the riding I've done on it (average speed around 80kph/50mph) wind noise hasn't been a problem for me. Mind you, I mostly wear it in just summer time when the weather is hot and it's not as windy anyhow. The other day, however, I wore this helmet on the motorway on a different bike that had a windscreen, going about 120kph/75mph, the wind noise was there quite a bit! So really, i'd say it depends on what kind of riding you plan to do! For touring at a leisurely pace up to 100kph the wind never really bothered me. I do usually wear one earbud for music/directions, but even so in the other ear it was fine. Hope that helps! Any more questions feel free to ask 👍

@susanalopez3516

Ай бұрын

@@BulletWanderer thank you for the long answer! Really helpful

How is the level of noise, in particular, when you're riding on the highways?

@BulletWanderer

6 ай бұрын

Don’t really ride highways too often myself , but the few times I have I didn’t really notice it being particularly noisy 🤔 then again, on the Bullet I wouldn’t be going much past 60mph on the highway anyways so I can’t say for sure I’m afraid 🤷‍♂️

The red plastic button has no function other then holding the strap from flapping around, it‘s the same on 700eur plus racing shoeis. I always have a difficulty with suggesting helmets aside from pure style considerations. To suggest a helmet, the single most important protection item on a motorcycle I can‘t suggest anything less than the utmost best test certification compliant or race homologated helmet. Sure you‘re not racing on a Bullet, typically, but above 30km/h any shock can be deadly. And any difference makes a difference at that speed already, especially mounted camera gear, just look up for an emergency doc and check his opinion about that. Even so, I agree, it looks nice for a budget priced classic full face helmet with replaceable inner liners. Actually not as cheap, just normally priced for a spanish distributor of likely eastern production. As they say, they consider themselves as clothing manufacturers, helmets require different costly know-how and operation. Nothing bad about that, just noticing that your 100something is likely a local shop sell-out price as they start online at around 230eur. You can‘t suggest the helmet is the same EC22-05 vs. EC22-06, as the testing is different and the thickness is likely, too, check the weight as an indicator with two identical helmet models but differing cert on your table, as most helmets weight 100g more for EC22-06, this doesn‘t show (weirdly) on the site, which means nothing as brochure data is rarely to the point. It‘s a personal decision of safety to be made by everyone, first, considering your responsibility. Then choses in that context what fits your head best, then style and price.

@BulletWanderer

6 ай бұрын

All good points! Didn’t mean to suggest that EC22-05 is too far off EC22-06, I know the former is 20 years old and a completely different standard, I meant that this 2022 manufactured helmet in particular might not be that far off a summer 2023 production if it was that quick to get it to EC22-06 safety standards . Of course I don’t know for sure, this is just guessing on my part and not fact! As I said, safety first , any design/aesthetic stuff always comes after . But of course , everyone should do their own research and make their own choices about these things 👍 this is more a review of the helmet cos people were asking for all the details on it .

Is the helmet EC22/05 standard?

@BulletWanderer

6 ай бұрын

This one is 😅 the current line up is ECE22/06 so I hear, so better still!

@Reuttooja

6 ай бұрын

@@BulletWanderer I wonder if it would be better to pick carbon fiber ECE22/05 or the heavier and with same price ECE/06 fiberglass composite version

Sorry - Brenden