Going to need a tour of the old place also.

Nice setup

Thanks for adding the regrets and advise at the end.

Thank You for the tour. Lot of positives to think about 🤔

Old bin tour would be good 👍🏻

You could also close that wall with clear polycarbonate and allow for visibility

@travissrhoton

3 жыл бұрын

I was going to say skin the sliding door with it!

love to see old complex

Enjoy the tour.

Yes - tour the old bin site. Thanks for the content!

Sell the dryer to COLE THE CORN STAR cause his is held together with rust 8))

Very nice and informative video, thanks a lot !!!!!

Would like to see old place as well please!!!! Great video!!Hope you have a good harvest.

Thanks for the tour

Good job on tour.

Love a tour of the old bin site when you get time

Is your son the boss. That was a great tour and keep up with the great videos.

Hear your pain on checking wet bin level, the guys used to have sensors in our wet bin and different lights would come on for different levels of grain the bin. It's not operational anymore but would be super handy instead of climbing it several times a day.

Yes to a tour of the old site.

Thanks for sharing and give us a tour of the other one

Old one too.

Def need to see the old place as well

Good job !! Good tour !!

Thanks for the information and would like to see the old site sometime

Good job good tour.

Def need to do a vid on the old site, would help to compare the two.

Good video Brian Thanks

Yeah let's see the old site !

If you view Border View Farms videos you will see he put in an excellent set of lights, a system that allows you to see how full your wet bin is as it fluctuates up and down. You could do same now easy b4 you hit harvest in full and not have to run the stairs all the time. Go check it out , it's a cool system he put in.

Hey Brian u can get clear tin. Its not sheet medal anymore its plastic but it is clear so u will be able to see the grain bins. And I'm sure it would be easier to install then a sliding door.

Brian You did One Hell of a Job explaining how everything works Awesome Job and Video Thank You

@brianpayne8931

3 жыл бұрын

Ditto that! 👍

Excellent tour I believe and I think a tour of the other would be good to see where y'all started. I could see y'all setting that bin sight up almost like Larson farms in the future. Have a great week.

@chrispitts2470

3 жыл бұрын

James L Coble I think this is his best video to date. Very interesting and informative

I'd like to see your old set up to compare the 2 please!

Nice setup!

Mount a weathertight tool box up on top of the leg with a set of wrenches in the appropriate sizes for things up there and a grease gun with a couple tubes of grease. Then you only need to remember to buy new tubes of grease and maybe a power tool for jobs one of those wrenches won't do.

Real nice system !!

Yes definitely would love to see the old site.

Hey Brian do like we did with our leg we made up tool box with few tools that u can use up there an a old hand pump grease gun so when u need to grease it only have take tube with ya

Let's get a tour of the old facility

Have you considered using plexiglass instead of a sliding door for the opening in the dump shed? Easier than sliding a door and cheaper alternative to glass. Could potentially add a sliding or prop up door to cover it for bad weather.

Brain really enjoy your channel and the comedy/ pain in the neck of working with family. Y’all keep up the good work. Personally just love the equipment and have kids that share the same love for all equipment. Watching you helps me to know that they’re more people that want to teach kids dirty hands make clean money and life ain’t always rainbow and butterflies. Keep the great videos coming

One cheap way to MAYBE help with the dust in your dump pit area when loading trucks. Get an empty one ton super sack and attach it to the down spout so its bottom is close to the top of the trailer you are loading. Make a hole in the bottom of the sack same size as your flow of grain. Then have loops of bunge cord around the sack on a few spots. I have seen this done at a facility and it's not perfect but seems to help. Might take some experimenting to get it just right. If you gets something that works well have a tarp shop sew you up something better. Or spend the money on some stratigically placed duct work with exhaust fans.

Check out border view farms, he added a light system to his wet bin for fill level. Looks pretty slick

thanks!

Thanks Brian.

Love the video Brian of the Bin tour .

Look at Border View Farms he installed a light system to show what level his wet bin is at; and you can see those light from a distance.

Love the tours, so yes please to another.

Yes, would love to see a tour of the old place.

Great video. Thanks for taking the time to put the video together.

Yay new video keep up the good work Brian 👍👍 and can’t wait for harvest

Yes! A tour of the old bin site would be awesome!

Great tour thanks

Thanks for the tour and yes to tour of other facility

Great vid Brian keep em coming. Yea i would love to see the old grain bin setup.

We put a water proof tool box on top of our 120ft leg to hold a grease gun and anything else you'd want up there. Just an idea for you

Yea gonna need to see the old place too thank you sir.

Great job on this video.. :)

Enjoyed the tour ,,love to see the other bins,...yes it's hard to see the future

Thank you Brian...well done, great planning

Thank you Brian. Excellent video

Thanks for ths tour. Very good presentation.

Great video love see one on the old site 👍👍👍 thanks Brian.

A couple of weeks ago "Border view farms" used a LED lights on the outside of there bins to show how full the bin was.Maybe that could help you

Definitely would like to see the old facility too 👍🏻

Just in case it is supposed to rain. After you showed us the cable sensors. You closed the door, but the latch didn’t catch.

Hey Brian. Great video on how a grain bin works.

Thanks for showing this Brian👍 Nice set up you have😀

U did really wel couldn't tell u never did this before Brian !!! loved the video love the grain bin set up really nice video !

Yes do a tour of the old grain facility.

Great tour, thanks!! I hope for a tour of the old site as well ;)

Great Video Brian, would be interested in seeing the old bin site as well at some point.

Thanks for a very informative bin tour! And yes, please give us a tour of the other place as well.

Just watched the old grain bin site tour. It's amazing how much tech for grain bins have come

Great tour and explanation for the farmer and non farmer! Looking forward to the 1970s old grain bin storage facility!

great step forward,, great design work,,,, i watched you build the new location,, i could tell you knew what you wanted

Old bin tour please!

That was really good and interesting. Thank you

Beautiful job.

Dang what a nice setup thanks for the tour

Thanks for sharing 👍

I really enjoyed the tour, would love to see the old one as well. I have always been interested in how things work, augers, sweep augers, lift systems, etc. thanks for taking the time!!!!!

Hey Brian do a tour on the old bin site!

A very interesting video. Thank you.

awesome, i'm slowly taking over the family farm and the grain storage has always been a after thought. a leg will be in the plan for the next few years.

Great four. Old bin tour would be cool too.

Yes let’s see the old ones.

Brian, I voted, and you definitely didn't disappoint!!! Great video of your operation!!

Great Tour!!! The old location would be interesting also. I was 60's and 70's farmer with my Dad!!

Thanks Brain, very good information 👍👍✌️

Great job adding the slide show at the end.

Since your don't have a stairway on your wet bin you could put bin flags on the bin so you could see the level of the grain in the bin from the ground.

Like to see the old bin site and hear the history behind it. Thanks

Brian , Nathan over at Borderviewfarms just installed 4 proximity sensors with led lights up the outside of their wet bin to show the bin level. Shown in several vids. Might your new bin monitoring system provide that info. on your phone maybe?? In a previous comment I suggested closing the doors to help with the dust problem. OOPS, no doors and a missing sidewall, silly me

Nice job Brian would like a tour of your old facility enjoy your videos keep up the good work can't wait to see your harvest videos.

Can't wait til the harvest videos start.

Thanks for filming this. Biggest improvement I see needs to be made is a coffee pot in the test shack. Serious question, why doesn't anybody cover their electric motors during the off season?

@lowellwalter9420

3 жыл бұрын

The electrical motors are totally enclosed, fan cooled (TEFC), and they can handle incidental water exposure

Old grain bin tour

You can plan, plan, plan... then build and still say “ I wish we’d done it a little different “. Y’all have done a good job. Hang in there and stay safe this harvest season.

Very impressive grain facility Brian. I used to work at our local grainery and had to deal with clogged augars and pits on a regular basis. Thunder storms played haveck on us when we would lose power!

Thanks for taking the time to explain your layout. I've been wanting to build a new site at our farm since all of our storage was wiped out by a tornado. This definitely gives me some good ideas. I would also like to see your other site. I've seen it in your videos but I would like to see the comparison and hear your in depth explanation of how that site operates as well.