Time to go shopping for some used guitars! Enjoy :) Are there any other things you guys look for when shopping used?

@anthonyarnett8774

3 жыл бұрын

I have an idea for a video I think many would find interesting but I am not sure how to contact you about without just saying on youtube and giving the idea to whoever. let me know if your interested at all. Watch all your videos, great stuff as usual!

@AndyDion

3 жыл бұрын

Fret wear and fretboard condition.

@drsumitrai

3 жыл бұрын

Thanks Daryll. Very helpful. Amazing tips. Big Fan🙏

@nerfgun260

3 жыл бұрын

When will you announce results of giveaway

@mkflyy

3 жыл бұрын

@@nerfgun260 what he said^ Wondering too! 😊 🎸

A good tip from Phillip McKnight is to avoid listings with blurry photos or sellers that are "selling for a friend". Blurry photos can hide defects, and the seller saying they're "selling for a friend" gives them an excuse in case the guitar is found to be fake or even stolen

The dislikes for this video are probably sellers who are trying to sell damaged guitars. LoL

@nickgames7120

3 жыл бұрын

Yeah lol

@joguipo

3 жыл бұрын

Amen brother man...

@gringogreen4719

3 жыл бұрын

Well, then, part the guitar out and throw away the bad stuff. Or sell it as a project guitar.🤔

@qwertyuioplmzaswq

Жыл бұрын

Maybe the just hate the dood preaching about the shits.

@donbishop6994

Жыл бұрын

Facts. 💯

Fret wear and other setup needs can add significant $$$ to a used "find".

@MrPhins

3 жыл бұрын

Surprised nothing mentioned about frets at all.

@Chord_The_Seeker

3 жыл бұрын

Absolutely. A refret job could cost anywhere from $200-$500. That’s a significant amount for a used guitar, unless you’re buying something vintage that costs as much as a new car. Obviously used guitars will most likely have been played a lot, and there is a very good chance the frets will be worn down if they’re not stainless steel.

@fawkesandhound

3 жыл бұрын

Yup, affordable guitars with dented frets are a dealbreaker. Not worth fixing or repairing.

@Wells306

3 жыл бұрын

Depends on the value of the instrument. Anything less than say an American Standard level Fender probably isn’t worth a refret.

@jmangi6221

3 жыл бұрын

Yea,I got burned on a firefly that was unplayable. Hundreds later,it's playable now,not perfect but at least playable now.

I will add for the jack tightening at 8:00 make sure to hold the jack and the nut. If you just tighten the nut you'll spin the jack and doing that enough times will cause the jack wire to snap off. (It happened to me) So hold the jack in place with one hand and twist the nut with the other :)

@wolfman8666

11 ай бұрын

Same thing happened to me, after I repaired the wire tho I put loc tite on the threads of the jack and it hasn’t moved since

Just an addendum regarding the output jack: when tightening it, hold the soldered parts inside in place, or they can end up twisting and snapping some (or all of the) wire connections. Which will result in no sound coming out of your instrument.

Check for fret wear. You don't want something that's going to need to be refretted soon. Check the tuners for binding/skipping. Cheap and easy fix, that may get you a better price, if they're not functioning properly. If you're looking at something with a Floyd Rose, check for wear on the base plate knife edges, and posts. Very frustrating to have a guitar that won't stay in tune.

@oeald886

2 жыл бұрын

How often does one typically need refretted?

@justcallmed933

Жыл бұрын

@@oeald886 depends on how often you play. The most used guitar of mine is 6 yo, frets are still fine, so that's mostly about old instruments (or you must be some addict playing 40 hours per day)

@Spudsmachenzie1

4 ай бұрын

Yes I’m surprised this wasn’t mentioned

Thanks this could be useful, seeing as I can’t buy a guitar new! XD Edit: Congrats on 700k Darrell! Here’s to 1 Million!

@DarrellBraunGuitar

3 жыл бұрын

Thanks man!

@zylavormusic2616

3 жыл бұрын

@@DarrellBraunGuitar Np :)

@audiophileman7047

3 жыл бұрын

Yes, the best guitar guy on YT deserves 1 Million! 👍👍👍

@joshuajohnson2216

3 жыл бұрын

@@DarrellBraunGuitar you're awesome man. Have you got my message about guitar give away?

I've had no idea about that 'hump at the heel' phenomenon! Thank you, Darrell! 🙂

If you're buying a Gibson pull the truss rod cover and see how many threads are sticking past the brass. lot of Gibson's out there that the truss rod has met their Max that neck is no longer adjustable

@PulauSwan

3 жыл бұрын

Great point Mike, obviously there are more than 5 deal breaking ideas, this is most certainly one. I considered buying an Aria Pro 2 semi hollow electric recently. The Japanese shop advised me about a complete lack of truss rod adjustment, and away I ran.

@onlyguitars

3 жыл бұрын

I was also going to comment on this. Especially on older Gibsons this is an important thing to look into.

@kensingtonong5737

3 жыл бұрын

Not just gibsons, any guitar. once the truss rod is not adjustable and cant be adjusted, the repair will be super expensive. and complicated

@PulauSwan

3 жыл бұрын

Talking about deal breakers and 2nd hand guitars, it is possible to straighten some warped necks, but it can take 6-8 months, and, of course, if it's a bolt-on, replacement is a feesible option. Emphasis on fee 😁

@leonborden9883

3 жыл бұрын

This is actually easy to get around. You can buy washers that act as spacers and it solves the problem.

Thanks for this video, Darrel. I recently bought my 1st electric, an Ibanez RG170R. Armed by viewing many of your videos, I was comfortable doing so. Background research is so valuable. Several guitar handbook pubs were great too,: Denyer (rev.ed.2014) and Cutchin et al (2008).

I look for sharp, or uneven frets. Looking down the neck and seeing an elevated fret, or frets which appear low as well.

@rodrich1644

3 жыл бұрын

Not a dealbreaker.IMO

I Bought a used squier affinity for less than 100 usd. In my country Colombia thats really cheap. it was super dirty and needed some love. I learned to deep clean a guitar, to set a bridge and polish the frets and even round the edges. something I'd never do on a new guitar. I think a used cheap guitar is a really nice way to join this world

I am really getting a lot out of your videos! Just started playing again a couple of years ago and I don’t know a lot about different guitars and the condition, etc so your videos really teach me a lot!! Keep up the good work!

Check the truss rod to make sure its not maxed out or frozen- especially on older acoustics !

Dead pickup is the least of my worries: Just pop in a working one. I can repair most electronics. Repairing wood problems is a whole different story. Run like mad from those. That includes guitars with high action that, when lowered to a decent height, start buzzing. That means fret work that takes a lot to learn or pay a pro to do. Then, like Darrell said, you start losing savings you got buying used: not just the money cost but driving cost, fuel cost, time cost.

Dang, all these years and I never knew about the neck twist thing. Thanks. At the end of the day, buying a used guitar for the purpose of actually playing (as opposed to displaying for prestige) is all about the neck and fret wires. Pickups, tuners and everything else can be replaced. Still to this day I can’t get over how profound it was trying different pickups in my guitars, the difference between each was astounding. I highly recommend giving different pickups a chance. Experiment with different pickups, even if you have to tape them down temporarily to try em out. You may discover something great!

Great advice Darrell! I've gotten many good deals used. Thanks for posting!

I’m getting my first electric guitar this Friday! It’s an Ibanez S621QM!! So exited!

@korat10

3 жыл бұрын

Ibanez are a great company own 4 guitars by them all play flawlessly

@phillippitts6294

3 жыл бұрын

Congratulations!

@luisaucedo

3 жыл бұрын

Nice

@yapangnrongsen5864

3 жыл бұрын

Congrats

@stufromoz8164

3 жыл бұрын

nice

Another short and informative video. Thanks Darrell 😊

Congrats on 700k!!! Love your videos Darrell!!

One of your best videos and my go to guide for when I venture out in the world of second hand guitars. Thanks!!

Always enjoy watching this channel.

also make sure the frets arent super low, sucks to find out you bought a guitar that pretty much needs a re fret

Always, ALWAYS check the truss rod. A seized rod with either lead to a new truss rod replacement + installation ($$$) or a new neck altogether. Most imports use standard metric Allen wrenches (I recommend buying an inexpensive full set at Walmart or something) but companies like Gibson and PRS have a specific rod nut which usually requires a special tool. Be safe, good luck!!

@grantkoeller8911

Жыл бұрын

My Squier bass is 4 mm Allen wrench

Good advice for the newbies, Darrell. And maybe a few not-so-newbies, too. I'd agree with all of your walk-away suggestions except for a dead pickup since I'm almost certainly going to replace them anyway. Other things to watch for are divots in the frets or substantial fret wear... Yes, a guitar can have a serious fret dressing done or even partial or complete fret replacement but this can be expensive and if the guitar you're considering is entry level it probably won't be worth the expense. Also, check to see the tremolo arm or socket isn't stripped, if you care about that feature. A lot of entry level guitars use the crappiest metal for the bridges and arms and that metal is easily damaged.

Tbh Darrell, I watch multiple KZread guitarists and whenever I’m watching your videos my wife always comments on how soothing your voice is 😂😂 I love your content. Keep doing what you’re doing 👍🏻

Major congrats on the major 700,000 milestone, Darrell! Quite well-deserved. 👏👏👏

Congratulations on 700k subscribers!!

You and your high voltuten guitar advice! Good tips Darrell and that is still one of the nicest looking Les Paul guitars I have seen.

This videos are really helpful, thanks much DB

Thanks for the valuable information Darrell

I'm old enough to remember before used guitars became "vintage".

@stufromoz8164

3 жыл бұрын

LOL over 50's hey????

@Customwinder1

3 жыл бұрын

Hang on a minute ! We're vintage ! 😳

@stufromoz8164

3 жыл бұрын

@@Customwinder1 sure are, like fine antiques.

@bldallas

3 жыл бұрын

Funny, me too! I also remember when a brand new American made Fender Strat was $600!

@jltrem

3 жыл бұрын

@@bldallas I'm closing in on 70. I remember when they were $300.

Would love to get your thoughts regarding online buying versus in person purchases.

@ramjam6934

3 жыл бұрын

I also would like to know more. Its hard to buy without playing first.

@AdamManley7

3 жыл бұрын

I’ve bought everything online my whole rig, if you use guitar center used market you know that they had to verify that it was worth buying in the first place

@ramjam6934

3 жыл бұрын

@@AdamManley7 Reverb is good too. It helps that you can call the seller or email them about questions.

@gavinw5469

3 жыл бұрын

Try a local music store. Got a new gretsch 5232t for 550 instead of 650 new.

@TheGuitarGuy69

3 жыл бұрын

@@ramjam6934 I haven’t had very good luck with Reverb. My last two guitar purchases had to be returned due to undisclosed damage (dishonest sellers).

Great info as always!

Yoooo grats on 700k!! Closer to 1m :o

All great advice Darrell!!! I would add a broken truss rod as a deal breaker... also a backbow in a maple neck is most times unfixable... great video!

Great one this Darrell.

Thanks for the video! Great advice overall; I would also check for excessive fret wear on a used guitar, since a re-fret can run a few hundred dollars.

Great video, mate. This is great advice for those who are new to buying used guitars. As someone who has bought many used guitars over the years, this is the kinds of advice I would have loved 15 years ago rather than learning the hard way! 🤘🎶

Thx mang, buying an axe for a loved one for Xmas. You wisdom is appreciated.

Great advice and explanation for sure.

Excellent video.

It’s just like cars, always go used. I recommend every player primarily buying used gear after a certain point. Guitars for better or worse are like toys to many-I’m tempted to say most-players. A lot of players will buy an instrument, play it a few times, then move it on for the next thing. If you’re patient you can snag pretty much anything you need in the gear space used and in great condition. And unless you want something stupid rare like a synthaxe or something, your money goes far, FAR Further.

Also, it's good to play it with a strap so you can really feel the weight. A heavy guitar can be a deal-breaker, especially for a kid.

Gold video! Thanks 👍

Thanks, Darrell. I've played for 60 years, 40 of those professionally, and I learned a thing or two.

Excellent video, thank you!

Hey Darrell. Great video. As always! But this one was especially informative, even for an old pro, lifelong full-time musician like myself. For these many years doing this, I have always advised to playtest an instrument before purchasing it. Always! But just in the last few years, that notion has gone by the wayside. Many to most instruments, including my very own, are now bought online. I have a brand new method of advising on the purchase of an instrument now. I wonder: could you prepare a video on the manner in which to search for and purchase a new, or especially a used, instrument sight unseen, or remotely? What are your methods? What do you look for? What are your "red alert" issues? Etc. It's a new era within a global economy and consumerism. How do you go about making wise, smart, educated, informed and smart purchases without good, old-fashioned hands on?

Great tips, thanks Darrell

Great Video! Thanks!

Good one Darrell 👍!

Can you talk about guitar maintenance? especially humidity (to much/less humidity)? Love your videos. You really helped me choose between an acoustic / classical guitar.

Great advice, I have been looking for a good used guitar. 👍🤘

Read my mind! Have been on the hunt for a used MIM strat. Great info here!

Great advice Darrell

Good tips, especially for beginners!

I have never bought used. Just buy new and upkeep. It's a trip to have guitars age with you, especially if you can take care of them. My 2007 SG is starting to develop the pink binding and finish checking. Nothing beats genuine aging.

Great video. Thanks.

Thanks for the vid right in time

Darrell this is a great video. Maybe you can get different examples of those wrong things in used guitars: photos or something like that to compare and know better. Saludos!

ask the Seller! best advice I ever had.

Darrell, probably doesn't get mentioned enough, your hair and facial hair are always on point. Nice work.

For me other than the major structural/ playability issues such as the twisted neck I would just use the small flaws like faulty wiring and finish cracks as negotiation points to get a lower price. But all of these are great points especially for a first time buyer who maybe isn’t familiar with the many problems that guitars can develop over the years

You didn’t mention that very high action on an acoustic or set net = costly neck reset

Hey everybody, hey Darrell. I would also suggest doing some basic research on the value of parts. Sometimes the combined value of the parts will be more than the the asking price. For me thats always a no brainer! Thanks Darrell, love the channel.

I love the 80's era Ibanez Roadstar guitars and especially the basses.. incredible instruments that's what I shop used and have some great basses from that era at great prices...your #1 is amazing...race car is apt for that beauty

Thanks broo, some things I didn't even know that could happen like twisted neck

One big thing to watch out for is counterfeit guitars. Scammers are getting pretty good these days at making fakes. Be wary

Buy both the guitar AND the seller! The same make/model/condition of used guitar generally sells for a bit less from a private seller, and can be a great way to save some of your hard-earned money if you've done your homework regarding that make and model, can inspect the instrument in person before buying, and if you are confident in knowing which questions to ask and what to check (thanks Darrell for the very informative video). If you have less experience and/or would rather have the added peace of mind, then buying preowned through a reputable guitar dealer, luthier, or similar business may be your best bet. Chances are their offerings may be a bit more costly than that same used guitar would be from a private seller, however the upside is after-sales support, greater assurance of authenticity, and in a worst case scenario, more options regarding exchange repair, or return. I've bought guitars both ways in the past: from private sellers after doing my homework and asking the right questions, and from businesses that sell guitars. Last but not least: when buying a pricey guitar from a private seller, one option is to meet at a luthier or guitar dealer, and get an estimate on giving that guitar a full setup. If the answer is it doesn't need anything beyond a setup, pay the seller, get your newly acquired guitar dialed in right, support your local guitar tech or luthier, and *everybody* goes home happy!

thanks for the tips

Great advice. My only comment on neck related “deal breakers,” is if the guitar or bass is a Fender or “fender clone,” replacement necks can be purchased for a wide variety of prices, and they are really easy to install. My preference for necks is any Fender licensed necks from WDMusic.

@malcolmhardwick4258

3 жыл бұрын

And Allparts !

Hey Darrell, great stuff. Very helpful. I've been shopping for a used floyd rose type guitar. I would love to see a locking tremelo electric shoot out, maybe guitars between 500 and 1000 USD.

Sound advice as always 👍

Great video

1301! That it's!😉😘 You're great ! My best guitar, a Strat style in classic metallic blue HSH, had cost about 60 dollar, it's amazing, even in sound! No Gibson, PRS, Fender will do this!

Man Darrell is the best. Now, he's teaching us the ups and downs of buying used instruments. I really have only taken two chances on ebay and it worked out fine. But, that's it, not buying another one that way.

As someone who has repaired thousands of guitars, always make sure the truss rod works. I have seen so many unrepairable guitars which had 1) broken truss rod 2) stripped truss rod nut and 3) a truss rod that had no adjustment left (was tightened or loosened all the way). The stripped nut is repairable, but is a very expensive repair. When I buy used guitars I always bring some tools to check out the things that are not readily visible when the guitar is assembled. It is also a good way to avoid being sold a counterfeit guitar or partscaster.

I didn't know about the hump on the neck by the body, good to now. I also check every neck thru or Gibson type guitars for repairs with a little blacklight, to look for hair line cracks behind the head stock or neck, you will see the white glue with a blacklight in a dark room.

I started buying and reselling guitars about a year ago. It has been soooo much fun!!!! I've had over 30guitars. Most important thing to check is the neck

Contact cleaner will clean a pot but it is made for contact points not the wiper or the resister filament of a pot. Fader cleaner is made for this purpose as it cleans and lubricants the moving parts of the pot to prevent premature wear that contact cleaner causes when the pots lubricant is cleaned out by the contact cleaner. This is a common mistake made by lots of people.

Good advice 👍

Incredible video. I know this seems dumb, but it happened to me. If it is a guitar which uses a trem bar or bigsby, make sure the trem bar is included or bring your own. Test that bigsby to make sure it works. Out of tune is okay, broken is a big expenditure.

I've played a few guitars with neck twists. Sometimes it's perfectly fine - Usually these are ones where the twist is gradual along the whole length of the neck, and they have individually height adjustable saddles. This can get you some real good guitars really cheap, if you're daring. Mind you tho, Torzal makes basses with a 20 degree twist in the neck. Crazy stuff.

I bought a "fixer upper" guitar earlier this year and one MAJOR issue I never ran into is...basically the nut is in the wrong place. Right now it's still at the shop, I learned more advanced luthier skills by working on a $35 Strat copy and putting a new bridge on (fill and redrill for the screws and Dremeling the crap out of the tremelo cavity) as well as pretty much everything else. What is stock is the body, the neck and the output jack cup. I bought a drop in nut blank for an import guitar and I started to file a wider slot. Well once I got to about a credit card's width I decided to have a professional do it. Now after a few weeks at the shop, last week I got a call saying it was off so bad that it would never play in tune. Ok, I did not mess up THAT bad. Well, as a first for me I bought a guitar where the nut was in the wrong place. The shop said it was an eight of an inch too close to the body. My response was to say shim that wood and put the nut where IT SHOULD BE. This is a single pickup (GFS Surf 90) single knob (CTS volume) strat with basically GFS parts and I did as much as I could as a learning project. The guitar was not playable as I got it as half the nut was messing on the G, B, and E strings. The finish was cool, the neck is odd but there is so nice figuring on the maple, the fretboard is Rosewood. The whole thing came together with a fair degree of effort but that was the idea until I hit that issue. So still waiting on the outcome and I suspect this repair will double the cost of the guitar. That said it still should be a pretty cool rocker once it is done. UPDATE: Just got the guitar back. So the repairs on the nut (shimmed and relocated towards the headstock) were successful. As I thought the cheapo guitar had the nut slightly too close to the body to play in tune. Since this is the first time since buying it that it has played is sounds really good. A few other issues crept up. The big one is that the truss rod does not work. The edge of the bridge closest to the jack is riding slightly on the pickguard so I need to Dremel that when I replace the strings. There are a few places on the neck where the frets are off. These would be an issue to a lead player but since I am mainly a rhythm cat, not a major deal breaker. So all in all it was money worth spending. I upped my repair game on this guitar. I learned EXACTLY where my novice skills stop. I have a cool looking, cool sounding, and fun playing guitar. While my financial goal was to come out of this between $200-250 was blown past, honestly I can call it a success. There are still a few things to do to get it where I really want it. Also there are a few bigger issues that once I am ready I can tackle them (new truss rod, refret with jumbo stainless steel frets) so it is a purchase and a project where I can continue to challenge myself down the road. It's 90% done. If it was my only guitar I might no be so rosey but it plays, it works, and its cool.😎👍✨

I also check if the frets are worn out. Replacing the frets can be expensive and you also need to know that the fret replacement would be successful. I also do some stalking on the previous owner to get an idea on what the guitar might have experienced before I buy it. And I always ask "why do you want to sell it?" and "are you the first owner of this guitar?". If the guitar has passed over several owners, there's probably something wrong with it. Thanks for the video, I would love a part-two

"A catastrophic drop featuring the guitar in its past life" brilliant way to put it! 😂

I ordered an Artist grungemaster today for the princely sum of $260 Australian Dollars, I have bought from them before and recieved a great guitar, this is the first guitar I have owned with P90 pups and my first ofset style guitar so I am excited and am looking forward to the tones I should be able to get with it.

I recently picked up a 2003 PRS CE 22 really cheap because the seller had bought the McCarty 3-way harness to replace the rotary setup and whoever installed it really botched it. The volume knob didn’t work and the pickups sounded really thin and quiet. Once I got it home, it took a couple hours to figure out how to fix it and get it soldered up. It came roaring back to life. I could easily double my money.

Half of my guitars are used aria pro ii LP, SG and strat and an aria diamond trini Lopez custom. All law suit era. I have a hagstrom super swede tremar p90 and les Paul custom I built myself. All of them bought on the internet. Never had an issue with any of em. Also I really hope you do a review of the hagstrom super swede tremar p90 and or the humbucker. I reckon you’d be really into them. Great guitars.

Thanks for the video...I would add to the list a good check to the frets.If they show deep grooves caused by years of playing, this may need expensive frets replacement, levelling and crowning from a liuther..

Hi Darrell, the hump can be fixed. You can remove wood on the neck and fix any elevation on the frets. Easy...

Always enjoy your video’s Darrell, what’s your favorite pedal man we all have one I think?

Don't just squirt contact cleaner in there, get a can of air or a compressor and blow them out first. If you go straight in with the cleaner fluid you're gluing the dust in.

I love the 2 tone Powder Blue colors on the Stratocaster

Can we agree? The twisted neck I totally understand but the hump if the guitar is a classic and an unbelievable deal that can be fixed these can be found on Martin guitars from the 30s and 40s so all I’m saying is of course a recent guitar if you see it but an old classic guitars and if the deal is amazing it can be repaired it will take a complete refresh it will take Many things so there are just other things to think about here but your videos as always are awesome keep up the great work Daryl

Head stock breaks and humps on vintages as long as they’re repairable are fine. The price of buying one of those and then getting it repaired is often less then buying one without the issue in the first place. Living room gear demos has a video on refretting from a while ago with a luthier named lars dalin thats pretty great and informative.

@mattdyck9931

3 жыл бұрын

I was also thinking of that video

One thing I like to check is the neck profile - how does it fit and feel in my hands. I would like to see a how to on amp buying.

@gavinw5469

3 жыл бұрын

Missing parts, problems with electronics are no gos, unless you can work with electronics well.

@skintslots

3 жыл бұрын

Spot on. Comfort and feel are the top priority with electric guitars and sound is secondary because the parts that make the sounds can be changed. Shape,profile and guitar comfort are often not changeable.

One thing you touched on BUT should always be checked is the truss rod. Check if the truss rod can be adjusted, if not walk away. I will never buy a used guitar without checking if truss rod is working properly.

It's ok to buy a Guitar with a twisted neck if you plan on replacing the neck. I bought a MIM strat with a twisted neck for $100, popped on a Mighty Mite neck, good to go. But you gotta know that before you buy it.