This saved me likely hundreds of dollars from what a shop would have charged and took all of 40 mins start to finish including drying time. Thanks!

@loveVanity6

9 ай бұрын

Is the bumper staying on with no issues? I may need to do this unfortunately

@AshleyGarcia-dr1sw

Күн бұрын

@@loveVanity6Same I just found out mine is Brocken so annoyed 😒

Forget the haters in these comments, your a genius considering I needed a a quick and effective fix, and this one was straight to the point and easy to follow.. Respect from the UK

I never of thought of doing this way. Thank you for this video! Cheap and easy fix!

Not all Heroes wear capes. Thank you

@peterl.104

2 жыл бұрын

This one wears a cap.

@trutrek913

Жыл бұрын

My wife just damage her bumper off of a high curb. This will come in handy for sure. Awesome!

That was brilliant. Well done.

Exactly what I was looking for. I appreciate this video.

Bruh, I am freaking impressed. Good job bro.

Excellent! Excellent!! Excellent!!! I'm needing to fix a "faux pas" on my car I just made a few weeks ago and am figuring out how to remove my bumper and fix the tabs that were affected, bend my quarter panel back to it's original shape and reattach the bumper!!!! This is just what I needed!!! Thank you for your idea and explaining it so well!!! Ten thumbs up!!!!

He said u wanna let it dry for 20 minutes to 1 hour, but we let it dry for 15 minutes only. Lol 😂

@aznnp77

9 ай бұрын

I used JB Weld. Didn't get hard for 2 hours. Didn't strap it in until 24 hours later.

@juvenalduarte9695

2 ай бұрын

Que produto é esse?

This is all a valid fix, and the only thing I would adjust on these instructions would be to make the hole bigger. Having that bolt tightly held by the bumper cover is going to transfer literally 'all' of the road vibrations directly through that bit of plastic and shorten the lifespan of the repair. A larger hole (allowing more of the vibration to transfer from the bolt to the mounting) would I think, yield a better end result.

Not all heros wear a cape, but all of them know how to use tape

NICELY DONE ...and well explained with awesome camera work. Exactly what I was look for....best explanation

This was incredibly satisfying to watch!

That Permatex epoxy is the shiz! Used it to fabricate the torn-off piece of my bumper (reinforced with plastic cut from a can lid + Gorilla tape), drilled out the hole, then bolted that f-ing bumper cover right back where it belongs. Doesn't look like it was ever torn off. Thanks for showing how simple this really is.

@juvenalduarte9695

2 ай бұрын

Na orientação de uso do produto...: O adesivo não liga a maioria dos plásticos de polietileno ou polipropileno. O plástico de parachoques, é de qual material?

Cheaper, faster and simplier than any other video watched 👍

Thank you this is exact the solution to i was looking for to fix the front bumper of my car. Love the content.

@ambrosiajimerson4808

Жыл бұрын

Did you fix it ?

Great solution thanks, thanks. Just what I was looking for!

Make yourself a bit of ABS slurry (mix acetone with abs plastic pieces in a jar), it will bond 10x better than plastic welder. Use a soldering iron to melt in some mesh in the plastic and top it off with the ABS slurry then drill a hole and it's good as new.

Super good idea. Thanks

Thank you so much your video was really helpful.

never thought about this way,, nice one!

This was such a great vid, thank you

Exactly what I need.. thanks

Saved me hundreds of dollars thanks

Nice job and a video that shows it all - so anyone can do the same . . . bravo!

That was 👌 awesome work.

Thank you so much this blew my mind

TY so much Sir. I do okay sometimes with mechanical parts but, I know nothing about body work. I hit like and I subscribed to you sir. I will share your knowledge. God bless you 😉

I used alcohol at 50% and epoxy. Do you know that I had that epoxy in my storage, but never thought to use it like this! Thank you for your video I realized that this was the solution to repair my 2006 Mazda 3 bumper cover edge.

DUDE ------------------> you are a legend! Thank you

Nice job!

Mind blown. really, wow

Going to try this on my 7 series until I can replace the bumper. Thanks for the quick fix idea!!!

Good job, out of the 8 videos I watched before, yours is the only one that makes any sense. Thank you

Thanks for this video

I have this issue with my Q50 as well lol passenger side. My wheel setup isn’t even aggressive it’s crazy lol Great video

@adamowens5507

9 ай бұрын

i have a 14’ 400 hp taurus i’ve only done highway driving with , a lot of it. i can’t keep the front of it together for the life of me and the car sits pretty high. having new plastics put all under engine bay just buying an entirely new bumper because truckers have chipped the h*ll out of it . rest of the car flawless . Passenger side front bumper sticking nearly an inch out just zip tied lol can barely notice but still looks wack to me. 255/45/19 all season nitto

good job

Awesome! Never would of thought of this. Thanks so much!

I fix mine with a plastic repair tool using one of the metal clips and also the convinient is clip is bendable sometimes the bumps are sand down and don’t hold anyway with this idea and with clip you can bend it up and it hold it or sand flat the bump and use a little screw small enough to fit on clips head

Thank you. I need that plastic welding home. I have some fender lin😮ers tabs to repair.

Thanks!!!

nice tip bro!

Good job bro

Good info

Research has been studied over now its time to get to work excellent video and work

Freaking brilliant dude. I’m going to do this today!

@chocolate_chipp_00

10 ай бұрын

How did it go?

Life savior !!

Ahhhh so nice

God bless yall !!!❤

Good looking g

Grat work bro, you to used fibee glas to have more harderer

My clips bugged me soo much i wanted to replace the bumper 😭. Thanks ❤

Makes me wonder what would work better, the bonding agent or getting a plastic welder and going that route?

Thanks for this video. I'm gonna try this on my scion. Bumper keeps falling off from one side only. It's a pain. I'm curious, how's your fix holding up after all this time?

Thank yoj don't know why I didn't think of this

Oh, so you guys basically did what I just did. Except I used a metal washer, and JB welded around it. If that falls out I'll try this. Thanks, I didn't wanna buy one of those tacky bumper quick releases. I'm too old for that kinda shit. Oh I lost the screw and that white thingy to screw into, so I just used a cable tie. It doesn't work perfectly, as if I hit a bump it maybe comes out 2mm, but it works.

That looks really good. I have no idea what you actually did though lol

Very good job. The filling material that you used is harder or the same as the car bumper?

Genius

Can I do the same way, for a Nissan Altima?

I didn’t know they plastic adhesive exist than you for the educational video

A M A Z I N G

The only issue I got is the plastic part which my bumper is supposed to be attached to has fallen off. There is no stable base I can really attach it back onto. Maybe I can glue the bumper onto the upper panel but I’m worried I will look weird with no gap in between. I can’t afford a whole new bumper so that’s my best option for the current moment.

Where you locaaated?

Besides this method how else can I get it fix ? At a body shop?

Can I put W4 on a pen to keep a hole while pouring?

@user-rr3oc9rk6c

Жыл бұрын

Effing brilliant! Wish I 'd seen your comment before I panicked, realizing I didn't mark where I needed to drill. It turned out great after all, but I hate that panic!

Good video, thanks. Why not put the plastic permatex under the plastic so you don't have to sand away later?

@pchidester923

10 ай бұрын

It wouldn't be flush to the other tabs

I hate the q50 bumper issues I have this on my driver side as well then other day my turn signal where place a screw threw broke so now I'm stuck figuring out to keep the turn signals from moving

Thank you tried zip ties n was tryna hid it and it just wasn’t looking right

Is there any audio on this?

👍

Can I use it on a crack bumper?

Did you just drill into the dash with the provided hardware? I don’t want to mess anything up on my truck

It's crazy how I'm looking for the samething for the same car 😂

@realhastalamuerte303

9 ай бұрын

Tell me about it I have my Sport bumper hanging off one side 🙄

That's a concrete block right is straight and left is bent towards @ 7 o'clock aka huge dark block

Not only was it a great tutorial it’s the same car I need to work on

🔟/4

Them damn q50 bumpers my knees are tired of fixing it

anyone know something in uk that’s like this as I can’t find this product in uk

@rollindeep786

Жыл бұрын

I ended up buying mine from the US and had it shipped, the closest thing to this in the UK is jb weld.. But I just bought this product and waited as atleast I saw the result of how to use from this video and didn't want to risk trying a different product which may yield different results.. Very useful video tho so respect

Breaks easy.

good video but plastic weld hasn't dried yet and it's been 5 hours...

@fila968295

2 жыл бұрын

Use a heat gun

@Wellroundedhustlas

2 жыл бұрын

How long did it take ?

@passthesriracha4765

2 жыл бұрын

@@Wellroundedhustlas let it dry overnight and it didn't dry... must've not mixed it well so I just actually plastic WELDED it with this tool

@LuisMorales-fv1rk

3 ай бұрын

Theres 2 types plastic bond one is faster from another

Just fucked up my Alfa Romeo bumper. Just bought the damn thing today. Cut too hard backing out of the driveway like a shit bag

Could I use JB Weld plastic binder for this as well ?

@alejandrogonz6081

2 жыл бұрын

Yes JB weld is really good

Couple problems with this fix. One of which is not sanding the surface of the plastic. The other being that the paint on the surface hasn't been addressed. It won't hold long term.

@sergioestrada9185

Жыл бұрын

Yes it will hold I did this to my car samme thing and I have years on it

Use ur tip of ur finger to smooth it out bro

At the end of the video I noticed that I have the same car but in white

Oh god what happened ?

That's back to normal in a gif

recently got a car with this job done to it & let me just say, it’s awful. Zip ties would’ve been 100x better.

@DanielGarcia-rz1td

Жыл бұрын

How’d you do it

This stuff is $4.00 at Menard's... if you have one nearby.

All you need is Flex Tape

@yrnjah1368

Жыл бұрын

Like fold it over the broken tab and drill a hole through it?

@davidbloomberg9494

Жыл бұрын

Does flex tape get rigid enough to support this ??

Why not just use a zip-tie? You pull away a bit of the wheel-well cover so you can get access to inside the quarter-panel, and you insert a zip-tie to where one of the bumper clips used to be. You then thread the length of zip-tie into the matching hole on the bumper, and then pull the rest of that zip-tie back to the hole of the zip-tie, and insert it into the tie, then pull to tighten the zip-tie and that loop of plastic then pulls up the bumper to the car's quarter-panel.

@alejandrogonz6081

2 жыл бұрын

Make a video I’m too dumb 😝

@lilark4201

2 жыл бұрын

@@alejandrogonz6081 felt

@MrMetalHead1100

2 жыл бұрын

if the clip is broken whats the zip tie going to hold on to? lol

@annagraham6204

2 жыл бұрын

Exactly. You’d have to drill new holes and it wouldn’t line up properly giving your bumper cover a wonky eye.

Nah

The volume was no high enough to hear this :(

I'm here because of my Q50 😂

Good video on what not to do. Clips are $8-10 each and there is one on each side.

@Awsometiger1011

Жыл бұрын

Link?

@santitabradley3343

Жыл бұрын

This is what I need the clips? What kind of clips to get @claire

@zachbargo

Жыл бұрын

You are not very bright😂 explain to me how you’re gonna remove the old clip and reattach the new one when it’s all one piece

@VoltageStudio

Жыл бұрын

Ummmm... Yeah, those tabs are part of the bumper mold. You can't just "replace" one.

Better hope your mechanic never has to get in there !!!! Or replace fog lights

@ByGraceThroughFaith777

2 жыл бұрын

why?

@adrianh9851

Жыл бұрын

Then simply remove the screw

@TheTruelakersfan

Жыл бұрын

@@adrianh9851 yes now remove the cement glue genius

@novakassem8899

Жыл бұрын

Why do you have to do that? They just created a new hole for the screw. You can still unscrew it?

Def not easy for average people hahaha

Big amateur

This is why kids should put their phones and xbox controllers away, get out to the real world, and get creative fixing shit for a minute. Unnecessary rant, maybe, but it's true.

@pianotnt

Жыл бұрын

No your right technology is getting people to be lazt

@rollindeep786

Жыл бұрын

Very real post ;)