Wow One of the best video on KZread explaining about powder coating and showing how do they do . This video should have crossed in million views .obviously only men watch this kind of video thank you very much

This has to be the best informational and entertaining video. Not only is it easy to understand but the editing of the video is hilarious but that's what makes it genuine and fun to watch.

@jibjibam

8 жыл бұрын

Agree with you. That's what proves the guys are honest. :)

@viniciosfotografo

6 жыл бұрын

The best part is the spanglish and the i am hungry part

@christopherferri5252

6 жыл бұрын

I do marine work in Pompano... after watching this video I'm giving these guys a shot.

Just a few days into powder coating for an assembly line, already learned a lot that will help me in the future. Very good video.

Super knowledgable and to the point. This guy knows his stuff inside and out.

The guy speaking in this video is smart, informative and very professional. Good Job Man!!!!!!

@aviau

3 жыл бұрын

Powder guns give NEGATIVE charges to the paint. Not positive like the guy says.

@STREEF90

3 жыл бұрын

If it was a professional he would have taped off the back or vacuum cleaned it

Fantastic explanation, the guy is confident af. Well done bro.

Thanks so much for responding to me. Your answer is exactly what I thought happened to me. BBB is responding and with pictures before and after of the work they didn't do , it should be helpful. I know BBB can't make them do anything but it's the principle of what happened that matters now. Thanks again!

Nice job, am setting up a powder coating plant in Nairobi, Kenya; and i have learnt a lot from your video. Will keep in touch just in case we get stuck up. Thanks a lot for the video.

Thank you so much man I'm starting my business should be running by next month cant wait I've learnt alot from your video thank you so much

Prep is a pain but needs to be done. When people actually see the whole process I go threw they are amazed on the patience I have lol I have A.D.D really bad and powder coating and motocross are my calm points in life. Both take a lot of patience and work but the end result is always awesome. My goal is to get a larger oven this year, they are expensive but you can do a lot more with them. Great vid bye the way

great presentation. well done demo.

Check our new informational video all about powder coating!! From prep to finish, we show you how do it all. Feel free to comment and contact us with any questions

@Bullseyepowdercoat

10 жыл бұрын

#davie #ftlauderdale #sunrise #weston #pembrokepines #miramar #weston #coopercity #lasolas #westpalmbeach #furniture #gates #fence

if you guys were in vancouver canada you could never get rid of me..love the vid..great info..intelligent spokesperson..wonderful product..good luck and thumbs up

I got to tell you that was really some cool information you really are educated in this field and I appreciate the time you took two produced this video thanks

Excellent video !! You guys do GREAT WORK !!

Thank you the best information on powder coating

This was a true one on one experience, I felt like this guy was staring into my soul lmao the editing had me dying 😆😂🤣🔥🔥 absolutely amazing video, very informative and you guys do excellent work. I wish you nothing but success and happiness 👍🏼☺️☺️

Nice nice set up have a really bad back injury need to change my career I think I’m gonna become a powder coder pretty up-to-date with technology I’ve built everything and I’m gonna try and do this great video guys

Good technology. I want to work in the work place. :)

I saw your ad on a home magazine but never in the car scene in South Florida. You guys need to get connected to some of the big meets like the BizSpeed events. The powder coater my friends and I used is a joke. I'll have to give you guys a call when I'm ready to get my wheels powder coated.

Cool video. I think you nailed it. Keep the U Tube world posted. Peace.... Toronto Canada.

Does your powder booth have some sort of vacuum/recovery set up to easily collect over spray? If so would be very interesting to see a video of how that works. Nicely done by the way.

Excellent video, very informative. Beautiful wheels. Thanks from Colorado.

good eye buddy! that was our old shop and was a real problem with cross contamination and dust. our new facility is completely separate and no open doors on side and stuff, that one had been a warehouse that was not suitable for powder coating... come by if you are in South Florida anytime.

@mdnayer1507

5 жыл бұрын

Jk NAIYYER 9136200993

Is the same media used for all metals? I'm doing it from home and not sure if I can use extra fine coal slag or have to move to more expensive glass bead media for aluminum wheels/timing covers.

AWESOME video, and clear to understand. !! Question: Where can I get a THERMOTRON oven like the one you have? Thanks !

This is a great video man great job

Very informational. Thank You very much.

Nice work! you need one of our star powder coating guns i think, it will make your work more easy and perfect.

Well I have learned some new things about powder coating and I want to say thank you and great presentation. From Tommygun pro in Australia

EXCELLENT VIDEO. THANKS A LOT.

If the rim is sufficiently scratched in multiple places if you just re-bake the powder coat will those scratches diminish or can you just grind it lightly re-spray it and then re-bake it

This is a cool video. This guy is very likeable.

I tried to powder coating myself the results were pretty good, but somehow I got the pertalite the color of the powder coating became dull and soft. what was the error in my work?

Can all aluminum rims be powdercoated and me not have to worry about warping?

Nice Presentation!

nice work guys

what solution are you using for Chrome that your talking about in the vid?

Nice vid. I wish you the best..

Thanks for sharing that is very interesting. Which powder sprey system you use ?

Wish you were in Las Vegas NV would've defenetly got my rims done.

Where you from. Amigo! Tienes cursors de capacitacion?

You do realy good work turned it into craft like pro who take job serious

great video!

Very-good presentation!

What type of powder coating gun/setup do you guys use?

Cool video , very good guys

Los rines no Llevan primers antes de la picture amarilla?

Hi Very nice job, Which one the ceramic specifications do you use? What is the supplier? Rgds

What PSI were you running? It seemed that it was pretty high.

i like your set up so don't think im having a swipe , but surely from a production point of view would you not process 4 x wheels at a time instead of 2 , also turn your powder down you have to much air to powder ratio set on your machine,but i like you guys looks good keep up the good work

a well explained Video thanxs.

He said ,im so hungry im bout to eat this little bald guy😂

Compa podrá ser q pueda pintar con powder coat un AK47 ? Una chingonada de trabajo y vídeo

Dude I want that Waveblaster!

Thanks @paddmanz , this was a long time ago lol.. our oven is 25 x 12 now!! I will put a video of our new setup next week :) thanks for the love brother

@mdnayer1507

5 жыл бұрын

NAIYYER 9136200993

Wow I would love to get into the power coating business out here in Las Vegas. I'm a 15 yr machanic.

@timexkills65

4 жыл бұрын

wyndm clark it’s actually not that hard just start small .

How do you hang a dumbell without getting wire marks ?

What brand/where did you source your booth from? Nice video -

How many times does he have to torque them lug nuts, he forsure stripped them all

Greetings, whether the pouder coating oven uses oil and gas burners when I sell the Riello burner in Indonesia, good luck always for you friends

Awesome video...you for sure know what you are doing. Here is a problem i have encountered, I did not see built up powder at the end of my gun fall onto the primary cover i was coating. When it came out of curing of course it now has 5-6 build up looking drops or where it was over coated. The finish is really great every where else except that one spot (about a 3-4" circumference). Am i able to light sand that area and recoat it again, or will i have to take and strip it all and re-shoot?

@Bullseyepowdercoat

9 жыл бұрын

No u can sand it down, clean it up, and reheat it, then recoat and cure again and should be fine. Yea it happens, sometimes you can see it if you check the parts with LED light before curing.

@dannyanderson4346

9 жыл бұрын

Thanks so much for the info... I love that this technology allows us to reach out for mentors in this business

Is the color white harder to powder coat or adhere to whatever you are painting? I had a outdoor swing powder coated and when I picked up the swing it was warm and a dull color. Once I put it in my front yard I sat in it and once I got up I noticed that it looked like the color had gotten dull. I thought it came off on my pants. I was so upset with the people that did the work I didn't take it back to them because they kept it and kept it for over 8 weeks and kept telling me they were having problems with their oven as the reason for the delay.

@Bullseyepowdercoat

8 жыл бұрын

Hi Jerry, white is one of the original powder coating colors, its probable they did not prep properly or cure for long enough. otherwise they powder coated it and then spray painted over it.. happens all the time when guys rush work, if you're local feel free to swing by, Mario

what would be the cost for a hard tail bike fram

Could you blast and powder coat a 1996 car hood?

Nice workshop

I am getting new rims and would like to powder coat them, they are all one piece, which finish would be best to buy them to then take them to you? satin black , gunmetal or chrome? i would like to powder coat them candy red. I know chrome has a great finish but you strip the chrome so best advice would be great

@Bullseyepowdercoat

8 жыл бұрын

Hi with chrome base we can get the best candy finish, we use it as a base, really sharp finish man.

thanks

awesome job on the video and info. I have a question. Can a 2 color process be done? I want to get my mountain bike coated but it will require blk and red.

@Bullseyepowdercoat

9 жыл бұрын

yes sir, we specialize in two tone jobs, check our instagram @bullseyebroward

@Bullseyepowdercoat

9 жыл бұрын

yessir check out our Instagram @bullseyebroward for some samples of Two Tone rims

Sir how to powder coat a plastic a side mirror or hundle of japanese car pls rply tnx.

Hola soy de chile, me interesa mucho su trabajo, por lo que me di cuenta también hablan español, si pudieran realicen el mismo video en español, seria muy interesante y de una buena ayuda..........gracias.........Pedro Rodríguez

Ah man that color @5:52 looks siq! Makes me want to take off whole body pannels, prep them and send them to you hah!

Nice job, but I don't understand why you powdercoat near the sandblasting cabinet and in open field, instead in a separate room. Even a good blasting cabinet it will make dust when you open the door to remove the blasted part. I know because I own also a business like yours and I found tiny particles of dust in my paint when I did testing. Now I operate blasting in another room.

@IronLaeg15

6 жыл бұрын

You can mostly avoid small dust going outside of sandblasting cabinet using an air extraction in it. The point is if it making a little negative pressure inside of the camera and wait for a little bit after finishing sandblasting there will be no dust (or quite few of it). But I mostly agree with you. As for me, I have two rooms to avid the problems - one for abrasive working and finishing and another for painting.

At 1st I thought it was just a badass looking Prius

Business owner: "Remind me why we are going out of our way to demonstrate on video, for free, every detail about how our business operates which will inevitably result in potential customers realizing that they can do this work themselves and/or help create competitors in our already crowded industry?" Employee : " You know, because like, KZread is cool!"

how much does it cost to powder coat two motorcycle wheels.

What would it be for a banshee frame.... and also do you do chrome plating

@Bullseyepowdercoat

9 жыл бұрын

Hello, banshee frame sandblasted and powder coated will be $350, group all the other small parts and we give you a good price for everything. 954-399-8796

How much for valve cover ?

at the start thought you about to do some MMA at me

Teach your boy how to properly install rims so he’s not warping rotors. you never go in a circle always in a a cris cross pattern Tip from an ASE certified technician.

@nsnduc

3 жыл бұрын

That and he sprayed the back side of the wheel hub. False torque specs, its crushing powder instead of metal to metal contact. Surprised the hub fit too, these guys are wack lol

I have the same BMW wheels at 56:55

42:37 what u call that machine (its just ah powder...powder gun machine) lmao but all realness very detail vid on powder coating , good job guys

@Bullseyepowdercoat

9 жыл бұрын

thanks man, yes sir powder coating gun

Powder coated fish also?

can someone explain to me why that huge amount of powder applied at 45:30 doesn't lay in the bottom of the rim. Charged or not, gravity should just have there be a pile there.

@dylanpham1436

6 жыл бұрын

Theres a vacuum behind the booth sucking up the excess

@The77Game

6 жыл бұрын

Yes but that can't pull the powder from inside the rim. It just picks up the power that misses the rim.

@buffalophil3630

4 жыл бұрын

Because the powder melts back down when hitting the oven..the rim should be heated to 385 then taken out and sprayed you'll see its dull then turns shiny that's the powder literally melting

Is there a glow-in-the-dark powder? Or maybe a chameleon style color?

@tictack8604

6 жыл бұрын

J McG there are all kinds of glow in the dark and chameleon colors go to Prismatic powders online

Installed wheel lug nuts incorrectly. Should be crossed torqued. Ane ferric oxide powder comes from IRON not aluminum. Thanks for a great powder coat video.

Anyone else catch the phrase, 'we use a ferric oxide made from aluminum'. I'm trying to figure out the alchemy they used to convert aluminum to iron.

saludos hermano lastima que el video no lo tienes en español lo hablas perfecto

i thought youre not supposed to coat the part of the wheel that makes contact with the hub.

@wsy480

5 жыл бұрын

your not. it will crack the min u torque ur wheels down...its not a lot but can lead to loose lug nuts if the coating comes out from in between

What kind of oven do you use?

@carlosh11934

7 жыл бұрын

If you see the video to the end, you will clearly see the brand name of the oven.

You know the guy that titan the lugnuts on that blue car in your shop needs to learn how to titan lugnuts the guy titan in a round Circle the right way is in a star pattern or every other one. Other than that looks like you all do nice work.

nice video, how much would it cost for those four rims?

@Bullseyepowdercoat

9 жыл бұрын

Hey there, what size are they and color do you want ? Typically is around $100 per wheel.

@robowizzy

9 жыл бұрын

That turbo is cerami coated?

Action

How much is a set up like this?

@primeautodesigns

4 жыл бұрын

If you buy everything oven probably like 2000-4000$ booth another 3000-5000$ Sandblaster 1000-2000$ professional grade guns around 4000$

I wonder if, 6 years on, the company is still doing business?

and ferric oxide (iron) is made from aluminium? Intertainment

@jeepinsmurf2694

8 жыл бұрын

Intertainment?

@bretthuffine

6 жыл бұрын

Aluminum ferric oxide.. Lolzzzz

@Marcellus74

5 жыл бұрын

I also smiled at the "positive electron" statement at the begining, that doesn't change the fact that this video is absolutely great ! Nice job guys !

Expand your business in india also. let me know if u r interested in expanding it in india.

people dont realize powder coating is "IMPACT" resistant and not scratch resistant .. you can hit it with 20 lb sledge and not mar the surface but place it on the concrete and push it across the floor and it will tear the fuck out of the coating. and is not the fault of the coating or application simply trying to expect it to do something it wasn't designed to do. if there is a coating out there that protects it against abrasion its gonna be very very very expensive .. they painted bull dozers with emron decades ago.. now its not used as its not environmentally friendly

1:15 \m/ \m/ 20:36 confirmed He has hambre

Hope you did see that the wheels of the Prius already are damaged on the edges from mounting the tires on it, your tire guys should be way more careful