Building the Ultimate Super-Powered E-Bike: Bafang 1000w BBSHD Installation Guide
Автокөліктер мен көлік құралдары
4 E-Bike Books
www.amazon.com/gp/product/B0C...
Amazon / Aliexpress BBS 500W
amzn.to/40eDsOd
s.click.aliexpress.com/e/_DFC...
Amazon / BBS Aliexpress BBS 1000W
amzn.to/3UGccqA
s.click.aliexpress.com/e/_DnD...
0:00 Building an electric bicycle
0:18 Double disc brake fork
2:00 Install new forks
3:28 Bafang BBS HD Bafang Motor
4:48 Crank arm
5:18 BCD130 chainring
5:33 chain
6:24 Shimano crank arms
6:46 Pedal
7:13 Speed hall sensor installation
7:59 Create a chain drop prevention guide
10:11 connector
11:06 Magnet power cut-off sensor
13:29 Battery Mount Adapter
15:32 LED light
16:46 XT60 connector
17:45 Tail light power cable work
19:07 Taillight clamp DIY
19:57 Bluetooth monitor
Congratulations on completion
⚡ Latest Featured Products Checklist / Amazon, Aliexpress. Coupang
Recommended tools for beginners
cafe.naver.com/tgenter/708
Tires, tubes, spokes, wheels, rims, hubs
cafe.naver.com/tgenter/705
Bike Frame + Motor / Fork & Rear Shock
cafe.naver.com/tgenter/712
Batteries & Related Products BMS Repair Inspection Tool Bufoam
cafe.naver.com/tgenter/700
Battery Pack DIY Holder, Nickel Sheet Parts
cafe.naver.com/tgenter/764
Bafang / TSDZ Central Motor Tuning Repair Parts
cafe.naver.com/tgenter/717
20 inch electric bike tuning parts
cafe.naver.com/tgenter/977
Hub motor/controller/repair fabrication parts
cafe.naver.com/tgenter/716
Brakes, pads, maintenance tools, fabrication tools
cafe.naver.com/tgenter/698
Throttle / chain / cable / hanger / derailleur / oil / maintenance car wash
cafe.naver.com/tgenter/713
headlight
cafe.naver.com/tgenter/748
tail light
cafe.naver.com/tgenter/746
switch
cafe.naver.com/tgenter/747
Phone Charging USB Convenience Device / LED Tuning Dress Up
cafe.naver.com/tgenter/703
Luggage carrier, suitcase, courier bag
cafe.naver.com/tgenter/719
Goggles / Helmet / Gloves / Taillight / Audio Speaker / Locating Tag
cafe.naver.com/tgenter/699
Transmission Drivetrain/ Electric Bicycle/ MTB/ Minivelo
cafe.naver.com/tgenter/766
Road bike shifting and drivetrain
cafe.naver.com/tgenter/752
Fat Bike, Retro Super 73 Fat Bike
cafe.naver.com/tgenter/1100
MTB. Road Bike Handlebar/Stem Collection
cafe.naver.com/tgenter/796
Suspension Seatpost, Adjustable Seatpost, Saddle
cafe.naver.com/tgenter/798
Pedals / Cleats Pedals / Cleats Pedals Adapters
cafe.naver.com/tgenter/799
Brompton / Minivelo Project Parts
cafe.naver.com/tgenter/750
For battery builders
cafe.naver.com/tgenter/764
Children's bike, baby seat, helmet. Supplies
cafe.naver.com/tgenter/814
Alton / Prarello domestic finished vehicle battery
cafe.naver.com/tgenter/704
Kids/Bikes/Sports Play Goods
cafe.naver.com/tgenter/814
Living & IT Review
cafe.naver.com/tgenter/701
E-BIKE BOOKS
Amazon Kindle / English Ver.
amzn.to/3M5eyJZ
Пікірлер: 88
E-Bike Guide 4 Books www.amazon.com/gp/product/B0C158WW7H?ref_=dbs_p_mng_rwt_ser_shvlr&storeType=ebooks 2023 Frame s.click.aliexpress.com/e/_DFvJoqp
@davidfuller764
7 ай бұрын
Son, you’ve got mad skills!
love it when everything is done correctly using the correct tools, nice build btw.
Well, it took me 5hrs, but I got my 1000w onto my bike and everything works PERFECT. This bike is so fast it is scary and I haven't even messed with the programming, yet. I need a programming cord but can't find one and an OTG cord for my phone so I can reprogram from my phone. I am so glad that everything worked out.
@Mobilant_US
Жыл бұрын
congratulations. That's awesome. Good brakes are recommended.
@mikethomas6051
7 ай бұрын
The programming cable is widely available online, not sure you will find one that works off a phone but you can skip all that with the eggrider v2, its a display with on the fly settings that you can change the same way
I LOVE this new direction you are going!!! And I'm SUPER HAPPY that you took the project from start to finish.. This looks amazing, what an amazing transformation, . Hope you continue to make videos like this about machines and technology that you usually have. Well done, the car is solid and has a lot of tangled wires. I'm planning to build a 3000w car that runs very strong
Thanks for sharing. There are some good videos about installing the BBSHD on youtube, but this is the most comprehensive one yet.
@Mobilant_US
Жыл бұрын
Thank you so much for your kind comments.
good job on the chain lift off preventor!
@Mobilant_US
Жыл бұрын
Thank you~
Looks great
It was looking good until the hideous chain protector😂
@Mobilant_US
Жыл бұрын
Thank you
@fistouille23
Жыл бұрын
haha same, i was like let me buy u a 3d printer
The headlights should be mounted on the center of the front frame that doesn't move with turning the handlebars. That's how I mounted mines. That way the headlights don't jerk around and become a distraction for drivers and they move with the sway of the bike move fluid. Don't know why people haven't caught on to mounting headlights that way for bikes. That's the way it's done for many motorcycles.
@Mobilant_US
10 ай бұрын
The technology to move the headlights in the direction of cornering exists in automobiles and older kawasicle motorcycles. It is most advantageous to move the headlamp in the same direction as the helmet.
@davidfuller764
7 ай бұрын
@@Mobilant_USyes, plus I want cars to see me! Distracting drivers with headlamp = safety.
Anazing built. I love to have 1 ❤❤❤
Erm you shouldn't have the motor at that angle, its practically vertical, you should push it up against the bottom tube, chain size is wrong as well, either chain size is wrong or you've over tensioned...
@Mobilant_US
11 ай бұрын
Thank you for your comments.. The motor is tightly packed into the downtube position. Except for special circumstances, it is an environment in which the motor cannot hit. The chain length is within the allowable range of the rear derailleur.
Hola amigo, tienes el enlace de Aliexpress de la bateria que utilizaste? Saludos desde México 😊
@Mobilant_US
Ай бұрын
As for the batteries, I make and use them myself because I do not trust most of the brands from Ala Express. The seller here is known to be trustworthy. thank you s.click.aliexpress.com/e/_DD60cIX
Hi i have very similar frame in my bike i was wondering if theres any problem with bending back of the frame to right side? I heard that the motor is so paverfull that it can damge frames with cheaper rear suspenion... What do you think about that?
@Mobilant_US
8 ай бұрын
1. I don't know if the frame is bent to the right or not. Do not bend aluminum too much as it will break. 2. Cheap spring suspensions have a lot of shaking because they do not have a rebound damping function. High-end suspensions, especially air suspensions, can adjust the spring pressure with air pressure according to the weight of the motor and battery, resulting in less shaking and excellent driving ability. .
Awesome job putting this bike together. Best install video of the Bafang motors I've seen yet. I did my install before I saw this and am having nightmare issues with cable management as all the cables are 2 to 3 times too long. Great job with the soldering. Really interested to know where you got those coils from that you call "cable bands" or "helical ties"? I can't find them anywhere. Can you tell me where you got them from please? Have you got a link?
@Mobilant_US
Жыл бұрын
s.click.aliexpress.com/e/_DDeOemH s.click.aliexpress.com/e/_DlpNhf3
@Mobilant_US
Жыл бұрын
cafe.naver.com/tgenter/708 If you use the translator function, you can see that all the items are gathered here.
@chrisoliver5911
Жыл бұрын
@@Mobilant_US TPU Spiral Winder - Great, thank you so much! 🙂
@Mobilant_US
Жыл бұрын
thank you. I am using it too. I recommend two. with the grip shifter. ( Sram can 10 speeds ) s.click.aliexpress.com/e/_DEW283r Unfortunately, this is only 7th gear. s.click.aliexpress.com/e/_DBPdGtF
İleride bu kit bisikletin mafasallarina problem oluyormuş doğru mu ?
@Mobilant_US
4 ай бұрын
I have ridden a full-suspension 20-inch mini bike for 80,000 km and have never had a problem with the pivot.
Double disc brake how fast this thing going to go
@Mobilant_US
2 ай бұрын
Braking power is strong. Caliper alignment is very difficult.
What exact model of Shimano crank arms and length?
@Mobilant_US
Жыл бұрын
s.click.aliexpress.com/e/_Dmj2nBf s.click.aliexpress.com/e/_DFJTjxn ko.aliexpress.com/item/1005003501827134.html?spm=a2g0o.ppclist.product.18.ce00RSKARSKAD7&pdp_npi=2%40dis%21KRW%21%E2%82%A9%2037%2C518%21%E2%82%A9%2037%2C518%21%21%21%21%21%402101c84b16792044779657221e14dd%2112000026079665448%21btf&_t=pvid%3Adbd3273f-0e40-4a53-bd5a-382a976be10e&afTraceInfo=1005003501827134__pc__pcBridgePPC__xxxxxx__1679204478&gatewayAdapt=glo2kor
i have the exact bike frame, isn't the motor to close from ground? i want to mount a bafang like this but i was worried when i go a bit offroad maybe the full suspension under my wight will travel to low and maybe touch the ground with the motor. and what battery capacity and voltage is that sir? it fits perfectly there i see
@Mobilant_US
Жыл бұрын
Going all the way down to the suspension bottom out doesn't sweep the motor to the ground.. Battery 48v 14Ah . Cross country driving is no problem.
@Gamez4Breakfast
Жыл бұрын
@@Mobilant_US any ideea how much range in asisted and/or throtle only?in this configuration.thank you✌️
@Jujubees225
Жыл бұрын
what full suspension bike is that? Where do you get it?
@Mobilant_US
Жыл бұрын
@@Jujubees225 2023 s.click.aliexpress.com/e/_De0lVgp
@mikethomas6051
11 ай бұрын
They have installed the position wrong, go check other builds, plus they are using a hollow chain thats not meant for high torque lol
Hello, I would like to know the total cost of parts to make this bike excluding motor and battery? I hesitate to do the same... And if you have an accurate list of parts, because the links are not all accurate. Thank you and congratulations for this achievement!!!
@Mobilant_US
5 ай бұрын
It costs about $2000 to $3000 including the motor frame and battery. Excluding the motor and battery, I think I spent about $1,200.
Thank you for making this video and sharing the parts lists. This is really good information. I will buy the parts from your links and built the same bike! Thank you so much!
@Mobilant_US
Жыл бұрын
Thank you. 😆
i know how to build it , already have one, where can i buy descent samsung or panasonic battery pack ?
@Mobilant_US
23 күн бұрын
www.18650batterystore.com/collections/21700-batteries Unfortunately, I don't know of a cheaper supplier in the US.
Grin Tech motors are more powerful than Bafang motors, but they're not as cheap as Bafang.
@Mobilant_US
6 ай бұрын
I love Grin Tech too
Donde puedo comprar la bici? El motor ya lo tengo
@Mobilant_US
Жыл бұрын
s.click.aliexpress.com/e/_DmJ8tUV qr / ver s.click.aliexpress.com/e/_DcJcnSZ this is new You will need to cut the bash guard adapter. It seems a little tight to install the battery.
Hello 👋 what do you think, a mega shark 52v 25ah battery would fit this frame ? Thank you
@Mobilant_US
9 ай бұрын
Hello👋 This is not known until it is integrated. As a last resort, put it on the top tube. Alternatively, dual batteries are recommended.
Why the front disk breakes are mounted in different directions?
@Mobilant_US
11 ай бұрын
To do the same with motorcycle brakes.
@adamnowak8876
11 ай бұрын
@@Mobilant_US You did not understand me. I mean that the rotor has a certain direction and the one of them was mounted the wrong way,
@Mobilant_US
11 ай бұрын
@@adamnowak8876 These floating rotors are symmetrical. So the direction of rotation does not matter. And even if the floating rotors are installed in reverse, they hardly bend due to the characteristics of aluminum. It was tested on an electric scooter. kzread.info/dash/bejne/Z4Bno7OOZaW3hqg.html
@Mobilant_US
11 ай бұрын
These floating rotors are symmetrical and flat on the left and right front and rear surfaces. s.click.aliexpress.com/e/_DDnqA1n
Why didn't you put second brake caliper?
@Mobilant_US
Жыл бұрын
Here kzread.info/dash/bejne/fYymm9uPXcavfbw.html
@SuperZabojca
Жыл бұрын
@@Mobilant_US I meant in the front.
@mikethomas6051
Жыл бұрын
Because it's for show, stupid fork change for no benefit if not using a dual caliper set up.
@Mobilant_US
Жыл бұрын
@@mikethomas6051 That's right. sadly. The seller sent only one brake mount adapter. s.click.aliexpress.com/e/_Dkbnv93
@Mobilant_US
Жыл бұрын
@@mikethomas6051So I recently bought this fork. s.click.aliexpress.com/e/_DBvZOIV
Hangs down too far is the issue with bafang motors.
Someone can help me? I have a bafang bbshd motor whit 52v battery,i have a eggrider display, i use my bike whit no problem for a copule ok month but in the last week, idk why any display show me the correct voltage of my battery, the voltometer show me 58.7v and the bike show 52v i have arealy set the display on 52v battery someone whit this issue?
@Mobilant_US
Жыл бұрын
14 series battery.58.8v is normal.. Because it is the battery full charging voltage. 14s x 4.2v
@itzpiromane97
Жыл бұрын
@@Mobilant_US ok great and why i cant use it all? Bc the bike display show me only half battery?
@Mobilant_US
Жыл бұрын
@@itzpiromane97 If one of the blocks in the battery pack series is broken. If the battery is used for a short time after charging, the battery will drop rapidly. If so, it is dangerous to continue using the battery pack.
@Mobilant_US
Жыл бұрын
Repairs are difficult. kzread.info/dash/bejne/g6ZkzJabnNqadrA.html
@itzpiromane97
Жыл бұрын
@@Mobilant_US i think can be the battery the problem? I have two battery and the same have this issue, same are 52v but one is 20ah and other one is 52v 40ah, for sure im not able to do this 😢
Problem with this frame design is you can't fit even a 20 amp-hr battery inside the triangle. Hard pass. The BBSHD needs 20-25 amp-hr battery for decent range. I own 2 BBSHD bikes.
@Mobilant_US
7 ай бұрын
you're right. So, when high-speed riding is necessary, battery packs are used in parallel. kzread.info/dash/bejne/p51rscOIj8S7h6Q.html
accelerator on the right is better...
@Mobilant_US
Жыл бұрын
That's right. However, if the full-grip throttle is installed on the right side, there is a shift delay. The brakes are also different for each rider.
@fraaggl
Жыл бұрын
@@Mobilant_US you put the shift gear on the left, no matter if it's upside down it still work fine.
the motor sticks out like a sore thumb
@Mobilant_US
3 ай бұрын
Because the chainring is large, it is very rare for the motor to receive impact while going downhill.
The clearance is -10cm. This is not a perfect build by any means
@Mobilant_US
4 ай бұрын
thank you. There are numerous variables in kit installation for each bike.
Even a little weird having a second brake on the front but I get it. but what I don't get is why no change out that cheap drivetrain Your cassette and chain are not going to hold up the torque of that 1000 watt motor. And your chain protector. I'd would of 3D printed that but to each their own I guess.
@Mobilant_US
Жыл бұрын
Thank you. The reason the brake position has changed is because I have been riding motorcycles for a long time. The chain protector might be easier with a 3D printer, but most ordinary people don't have one. I made my video so that anyone can watch a book or video without any special tools and follow along.
@Mobilant_US
Жыл бұрын
The reason for the 8-speed is because the maintenance cost is cheap. it have to change the chain and cassette every 3000km.
@eXTreemator
2 ай бұрын
You don't. Just use goid quality cassette and not that...And change chain