Building the Impossible | 100 Dart per Second Nerf Gun - Part 1
100 darts per second, from a single magazine and single barrel. Is it possible? I have no idea, but it sure won't stop me from trying. You may be surprised at just how quick it can get.
Create a free Onshape account here: Onshape.pro/3DPrintedLife
Project Page: cad.onshape.com/documents/74a...
Git Page: github.com/DDeGonge/FastHecki...
In this video, I begin work on the core of my 100 dart per second nerf gun. The concept uses a rapidly spinning magazine to feed darts into a custom belt drive system and propel the darts forward. In this video, I fire up to 8 darts at a maximum rate of 50/second, but it should only take a little more development to turn this into 80 darts at 100/second. It's going to be insane, that is guaranteed.
Also, new logo and branding! Let me know what you think in the comments.
Steve Mould Belt Video: • The Band Should Slip O...
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
If you'd like to support plus receive some exclusive perks, you can do so here!
/ 3dprintedlife
Join the discussion on Discord! / discord
Follow me on Instagram and Twitter! / 3dprintedlife_official
/ 3dprintedlife
Buy my filming gear! (Affiliate links)
Sony a6400 amzn.to/3d0SMee
Tamron 17-70 lens amzn.to/3vLqYkx
Oben Tripod amzn.to/3dd4S40
Light Panel amzn.to/3Qa1dTs
Sponsored in part by Onshape
Пікірлер: 1 000
Very cool! Always wear heavy gloves when snapping acrylic on a score line. It can shatter in a jagged manner; you will slide your wrist over the sharp points...and you'll be calling 911 if that happens.
@lucasjohnson5803
Жыл бұрын
I was about to do this for a project, great tip
@lordbored2706
Жыл бұрын
The real LPT is alwys in the comments
@madxenomorph
Жыл бұрын
I have a nice scar on my thumb from when I was doing that with glass mirrors, so yeah, gloves.
@kalebnelson4569
Жыл бұрын
Wear green socks so if it’s st Patrick’s day you don’t get pinched.
@hugegamer5988
Жыл бұрын
If the scoring does nothing and you can’t break it for the life of you, that’s not acrylic but polycarbonate. As far as making things that bear any load when you’re not solely using it for optical clarity, just hit that unknown piece with a hammer. If it’s acrylic it will shatter instead of do nothing and you shouldn’t have used it to begin with.
Okay, wow... at the start of the video I thought the goal is practially unobtainable, but the magazine idea is so good... I'm blown away to to see it working as well as it does. Ingenius, super stoked to see the next video! Only a bit of a shame that the whole magazine will be empty in less than a second lol
@3DprintedLife
Жыл бұрын
I want to add a fire rate and burst amount selection so it'll be possible to not drain the whole mag in a second. But where's the fun in that?!
@samuelschurman3762
Жыл бұрын
@@3DprintedLife You should talk to the guy who's currently working on a blaster called the MOAB. It's basically an m134 minigun but as a nerf blaster and it's gorgeous. The thing is insane and besides having multiple firing modes can unload darts at a ludicrous 3000 darts per minute.
@TrabberShir
Жыл бұрын
@@samuelschurman3762 100 per second which @3DprintedLife is going for is twice that firing rate. 60 seconds * 100 darts = 6000 darts per minute. I hope the uploads come a bit more often than past videos on this channel, I foresee major and possibly expensive engineering challenges associated with accelerating the darts to 40m/s in 5ms. The drag force on those pins looked high enough to gouge most ramp materials and/or shear the pins at 8000 m/s/s of average acceleration.
@samuelschurman3762
Жыл бұрын
@@TrabberShir yeah i know the fire rate he's going for is higher. The blasters themselves are also fundamentally different. This is technically a drum fed flywheeler with a single barrel where as the MOAB is a belt fed multi barrel springer. That's right a springer with that kind of fire power. What I was getting at though was that he has his blaster hooked up to a display that shows his current ammo and let's you change the fire rate and mode on the fly. Maybe he could provide some insight on that front.
@FGC292
Жыл бұрын
Gotta make an auto-loader to reload it in 1 second now.
Nice! This build is so dope! I'd add a suggestion of putting the ramp that pushes the darts to feed forward on a solenoid, so that when you want to fire, the solenoid pushes the ramp down so the pins engage and push the darts forward. That way you don't have to shoot at a low ROF as you spin the magazine up to speed. And you can put an encoder of some kind on the drum so the ramp isn't pushed into the pins. Also, for the feeding ramp, I'd suggest putting a strip of steel on the faces that feed and return the puns; I'd be worried that at the speeds and forces you're using, the pins will destroy any plastic control surface. I cannot wait to see the next part of this build!
@3DprintedLife
Жыл бұрын
Great minds think alike, I had something very similar to that in mind! I definitely want to empty the entire mag in under 1 second which won't be possible without a pre-spin.
@IAteALightbulb
Жыл бұрын
I was legit about to comment that
@kg-Whatthehelliseventhat
Жыл бұрын
@3DprintedLife hello I would like some help with a project for my new kitten. I can't afford much but I would like to pay for the guidance, I could probably do the building of the project. Please reply. I thank you in advance
@TD-er
Жыл бұрын
"Also, for the feeding ramp, I'd suggest putting a strip of steel on the faces that feed and return the puns;" In other words... "pun intended" :)
@Illyclone
Жыл бұрын
@@3DprintedLife Preface: Idk anything about anything Would it be possible to have a ramp that you actuate sitting behind where the darts rest. So the belts for firing and the drum spinning are both running off the same trigger pull, and then pulling the trigger to engage the ramp starts the firing? Like you push the ramp into place behind the magazine, and the darts are like the piston with the ramp being the camshaft. Without using pins extending out of the magazine. I assume this is all already completed and am looking forward to seeing how you handle it in the future video.
Really makes you appreciate the engineering that goes into high rpm miniguns. The way the magazine's rotation chambers the darts reminds me of that handheld m231minigun
Awesome! I've been wanting to try belt-flywheels for a few years, super cool to see it finally in practice.
i'm a software developer who just started his journey with robotics and man... you are like a final boss of robotics :D Such a great way to figure out possible solutions for very complex problem. Subscribed for more content. Great job
Just a tip for cutting clear plastic sheet products. The plastic with the purple look to the edges is polycarbonate and is much less brittle than PMMA often just called acrylic and sold under many brand names like Perspex, Plexiglas etc. It's often easier to score both sides of the cut line before snapping on the edge of the bench. Scoring with the back edge of a snap-off blade knife can help get the score line deeper with repeated cut strokes. This helps avoid snapping the tip of the knife in the narrow score line as you try getting in deeper. Also wear gloves if you want to avoid cuts if the plastic doesn't snap nicely on the line and leaves jagged sharp bits. I don't remember the gloves most times and the good news is skin is self healing!
@timehunter9467
Жыл бұрын
I’m using acrylic sheets but going overkill with a dremel, snapping plastic will always go wrong for me no matter how deep I score it 🤣
@superslash7254
Жыл бұрын
There's also lexan, which is even less likely to shatter.
@fancygiraffe3340
Жыл бұрын
Yeah, I saw him using his bare hands on that plexi and winced a bit. Would highly recommend gloves.
@MattOGormanSmith
Жыл бұрын
@@superslash7254 Lexan is the DuPont trade name for polycarbonate. DuPont's special skill is making up cool names for stuff.
The quality of this video is an absolute blast given how many subs u have, you are on par with Proper Printing and the bois, get up there mate, subscribed!
This was so fun to watch! It's a really cool design challenge. I'm excited to see the next video!
@3DprintedLife
Жыл бұрын
Thanks glad you enjoyed!
Such a cool build already! Super excited to see it progress! Would be hilarious to take the final build to a nerf war; Practical? Obviously not. Terrifying? Hell yeah.
@3DprintedLife
Жыл бұрын
The intimidation factor makes up for the absurdness of it!
@komilover1
Жыл бұрын
put a flame at the tip and flame darts maybe
@komilover1
Жыл бұрын
joke
@Nugcon
Жыл бұрын
Bro is gonna be laying down suppressive fire
I must say, I am very impressed by the thinking outside the box, the innovation and the ability to solve problems. One of the most creative videos I've ever seen. impressive.
8 year old me, kicking down the door to my little sister’s room:
This is awesome! Already hyped for the next video!
A quick suggestion with the WAGOs: put the power input cables into the centre slot and the loads into the closest ports first, higher load closer to the input. This shortens the path across its contact rail and can help reduce voltage drop, which, in my personal experience, allows a bit of a better performance on low voltage DC and protects the Wago itself from being overheated by high currents DC requires (it is meant for AC use, after all). It can be marginal depending on how many amps you're drawing, though. EDIT: you can also use drilled out and reamed brass insert nuts as bushings for the rods, which should offer a bit less friction than the metal on plastic setup.
@Skinflaps_Meatslapper
Жыл бұрын
Silicon bronze bearings come in all the shapes and sizes he'd need, reaming out threads on a nut seems like extra steps
@3DprintedLife
Жыл бұрын
Good tips thanks!
"My motivation for this is not really clear" wow this is relatable 😂. My wife often asks why am I building X project and 9/10 I can't really explain why
Super cool! Some ideas I had while watching include: in the final product, you can make the magazine spin up button into a grip safety like a 1911, or maybe a middle finger button below the trigger; use a rolling cam to cam the darts into place; use a dyson style impeller to blow air into the barrel (once you have a barrel) for additional speed.
This is a fantastic build. Easily won a subscription to your channel. High quality editing, pacing, and entertainment value are only surpassed by the top tier engineering and execution. Keep it up, this is the kind of content we all love to see, a rare gem indeed.
If you get stuck on the action mechanism for the lever arm, I'd suggest getting a curved pusher bar to push out and push in the round. It should have something like a 60 degree angle when laid flat, but curves around the drum to ensure an even force as it transitions from fully out to fully in.
This project is insane! I've been trying to make a shortened dart drum mag for my launcher, but just keep failing to make it smooth. I can't wait to see the next part!
You have earned my subscription! I'm super exited to see what the finished build is going to look like
40s reaction time go BRRRRR
I had an idea for a hyper-fast blaster when I was a kid, but mine was going to use air power and simply rotate a big drum which puts each new dart in front of a constant air stream. SO COOL to see an even better idea coming to reality!!!
@crutchgecko
Жыл бұрын
I was thinking the same! Pneumatics often simplify everything. I feel it would last longer and be less jam prone. Could even use a co2 cannister for that to keep it light. Maybe the bullets could even feed in with the same power source somehow? Now that I think of it, why load sideways? You could feed the bullets through a tube from behind the breach - in line! Hmmm imagine filling a garden hose with nerf and then pressurise said hose! You'd get back to back nerf bullets! Not sure how you'd control it unless you had a low pressure for feed and a solenoid valve to trigger larger pressures for firing....😊
Awesome video, I'm a huge fan of projects like these. Looking forward to part 2!
Wow, amazing channel, love the drone footage, got seriously into that around 2017 for a couple of years! The state machine is very interesting too, more research required
Cool, can't wait for Part 2!
Love stuff like this. Just pure engineering, showing all the different iterations, seeing what works and what doesn't. I thought the goal seemed completely unreasonable going in, but you've got a really good start here!
its really wild how beneficial taking Digital Logic 1 & 2 in college was for me, it was before there really was much of a creator space on YT - but like learning how to approach low level FPGA programming (VHDL mostly) & break down 'I need a black box to do this' into actual controller code + a functioning system is an S-tier skill imo (even though I've never made a single dollar with it in my 90% js based software career haha). I did not expect how much fun it would provide me after school in my free time (especially when I was in the trenches dying after pulling an all nighter working on the 16-bit computer final project lol) Big ups on this video, I hope you get more people into building their own cool ideas, because I would not be a engineer today if I didnt decide to take on a project outside my skillset when I was in High School a decade ago.
I think this is the first video of yours I've seen, I've subbed! Just a little gutted that this video is less than 24 hours old, meaning I can't skip to a future point and see part 2, as it's not made or uploaded yet.
This is cool! With the new Mythical drum mag advertising around 100 DPS I was wondering if a belt driven system like the hyperfire could ever reach its full potential, and you're on the road to proving it's possible!
@cxpKSip
Жыл бұрын
Drum mags for the win!
If you consider an afterburner, keep it brushless. Very high ROF on brushed motors will lead to headaches. Even with that, running actual crush in the flywheels will cause a pretty significant stress on the ESC's, so make sure you use good ones. It is very possible to de-solder the mosfets with high ROF demands... Done it a few times lol. Secondly for a ROF claim to really count, it needs to be measured. It's a lot easier to measure when you're driving the pusher directly, so you may need to look at something like a light gate or something of that nature on the barrel. Plenty of people showing off "50dps" blasters with small n20 gearboxes with a simple division of it's rpm on a nominal voltage. Having sensors in the blaster will also help identify bottlenecks and issues. It's very useful to have, even outside chasing numbers. You already know, you are chasing milliseconds... Lastly, you gotta field it. There are "big numbers" blasters, and there are fieldable blasters with big numbers. The latter is the most impressive. Good luck.
So cool! I'm keen to see how this project progresses!
That's pretty cool man! I like to watch people put their logic to practice. Very interesting 👍🏻👍🏻
Wow, the results are pretty phenomenal considering you haven't even included a barrel yet!
For inertia reasons, I would suggest using a set of Micro-flywheels for the second stage. Should be easier to fit and rev up to get some serious fps out of the short darts. You should then be able to just put a Worker SCAR barrel on the end of a short brass barrel to impart decent spin on the darts as long they’re traveling 200 fps or less. Love the video! Keep up the good work!
@AlexJoneses
Жыл бұрын
they already are flywheels, but it would be cool to see him replace the stock flywheel motors with drone motors as it would probably handle the load much better
@lucaskennedy2774
Жыл бұрын
@@AlexJoneses He's talking about the second stage that @3Dprintedlife mentioned for increasing the dart speed further, he said he's going to implement it in the future
I loved the sound of all the darts hitting the door! Really cool project tho, cant wait to see it finished!
That is so sweet!!! I love it! I'm building a pan tilt nurf blaster and I was thinking about rifling the barrel.
With a drum that large spinning that fast you could adjust the loader to just use centrifugal force. Reverse the curve direction of the slots, and you can keep them pushing outwards using some small weights. This will have a much higher density and a simpler loader will make it more reliable. To further simplify you could also switch from a belt drive to a CO2 launcher, triggered much faster by the drum itself, and saves you having to "poke out" the darts before firing, if you fire the air from behind the drum.
@nachgebaut4176
Жыл бұрын
The Problem with Co2 is that you need more tools and maybe make custom parts out of metal. I'm having my own Project with an Co2 airsoft and I only have a 3D printer at hand, it's very difficult I would say😅
This is awesome, ngl. If you want a tip to improve it, use the solenoid to control a cam. Using the spin-up button, the belts and the drum rotates and if you press the trigger (which doesn't work if it isn't running), the solenoid pushes the cam forward and let the darts be pushed, otherwise, they won't be pushed into the belts. In adition, you could add a firerate control, like some real weapons have, and that would adjust the speed of the drum to match the firerate. I hope this helps you or inspire you. I'll suscribe to know how this project advances EDIT: I've just thought that you don't need the solenoid to push the rods that push the darts, you can just put some simple mechanisms to push a cam into the path using the trigger itself. I'll try to draw it: | | | | |____ | / | / |___ | ^ \ |-------
(5:08) YIKES. You weren't kidding on "Overkill". That drone went flying supersonic!
Super engaging storytelling. And great filming/cinematography. Also, it kinda goes without saying but, killer project. Even if just for the learning process
mate this is absoloutly amazing! carnt wait for the part 2! you have a new subscriber! take care and have a great day!
Awww yeah! Really looking forward to seeing your advancements on this! 😍 Awesome work so far! I was tinkering with belts for some time but just couldn't get them to survive the abuse for long enough. That feeding angle idea of yours is simply GENIOUS! I have been working on my ex-corona project 'PewPew' for way too long already. Recently achieving over 60DPS with some overvolting, i think that's about the glass ceiling with a solenoid+flywheel approach. Looking forward to you cracking those 100DPS! SUBSCRIBED! 🤩
My first introduction to your channel; super cool!
What a neat idea! I've gone ahead and subscribed, looking forward to the next one
dude thats Genius! keep up the good work. Looking forward the next part
Can't wait for the next video! What an awesome project.
Definitely worth a sub!! Stoked to find your channel 👍
This vid deserves a million views! Great project bro...
Incredible work man. I can’t wait for part 2.
Great progess man! All the best on the future design tweaks👍💪
This is awesome!!! I came across your KZread channel today. I also have a 3-D printer but I’m not very good so maybe I could use this channel to help improve my skills. also your channel is really cool. Your definitely my favourite KZreadr
That look from your cat… withering. Interesting project and I look forward to the next stage. Thanks!
your videos are better than some of the bigger channels. KEEP GOING, YOU GOT THIS!
Neat! I've been pondering a similar project, but using compressed air instead of motors.
Such a neat idea. I look forward to the next video. If you put 2 or three more belts to cover the top and bottom of the dart (maybe right after the initial belts), and put them at a 25-30 degree angle; you should get the spin you want for a straighter trajectory. Could even speed them up a little bit to guarantee they always outpace the drum and reduce the chance of a clog. Increasing the drum size could also help in 2 ways, longer fire times, and it would give your dart advancing mechanisms more time to do their job.
such a sick build please keep going and make it PERFECT
Subscribed….great project and video! Can’t wait for the completed build
Must have been a very satisfying moment when those darts hit the door with a soft rat-a-tat-tat... very slick indeed.
You are absolutely amazing man. This was so freaking cool to watch :D
@3DprintedLife
Жыл бұрын
Glad you enjoyed it!
When you fired that volley into the livingroom, my mind added the BRRRRRT from an A-10 to it 😁
mans just made single barreled minigun. i think looking into rotary machine guns would have been a good idea, although what you designed was essentially a reverse minigun. instead of the feed mechanism being stationary while barrels rotate, it's the other way around...
Once the magic smoke has escaped from a component it can not be inserted again - sadly. Really fantastic project and great presentation. You have gained another subscriber.
Holy shit this thing is soooo cool. Props dude, that is some solid engineering work! Can't wait to see it when it's done :)
Cool build! I've subscribed to get notified when you upload the follow up video. I would probably have tried launching the darts using compressed air.
You do such a good job of keeping it simple imo, that drum has such minimal moving parts it'd be easy to make a bunch of them 😂 looks fantastic and I can't wait to see the rest!!
@3DprintedLife
Жыл бұрын
Thanks! Hopefully simple means reliable 🫣
Really cool and love fact people can do this in CAD and 3d print them, i have to do it on paper or my head but does remind of the days of office wars in an IT/Engineering company until people actually got seriously hurt and we decided we should stop
Very nice so far ! I've noticed the darts don't always get into firing position so I think some work on the magazine guides is needed for high fire rate. Or maybe spin the magazine the other way so centripetal force pushes the darts outwards on the magazine
Wow! Can't wait for you to put it all into an enclosure!
This is so cool. Would love to see what the finished product would look like!
your so underrated, i hope you get the recognition you deserve.
Crazy build so far! Can't wait to see this thing finished
@3DprintedLife
Жыл бұрын
Hey, thanks! I actually just recently came across your channel from your wobbly phone people sculpture video, love the content!
Wild! Cant wait to see part 2!
I’m sure someone has already suggested this, but the advancers on the mag are perfect for using a pathway like a aircraft guns housing and bolts use. That way you can spin the drum as fast as you want the the round is always advanced
You should make a movable slide for the drum levers with a solenoid. This will allow you to spin up the shoot motor, accelerate the drum to speed, and when you're ready to fire have a solenoid push the drum levers out so the bullets hit the shoot motor. This could potentially allow you to hit a faster shoot rate since the drum can be up to speed prior to firing.
Using the solenoid to knock itself into the trash was an amazing throwaway joke
10:20 I'm so glad someone else has this bane quote living in their head rent free
really looking forward to seeing more of this :) this is awesome.
cant wait to see part 2, you got my sub :)
Very interesting, I'm looking forward to see how this progresses.
My man casually taking out his ESPER :P Nice to see a fellow nerfer in the wild !
the first firing test gave off actually like game physics of a minigun, like, it had the accuracy that i would expect it to
That’s absolutely bonkers I was proud of myself 5 years ago for 30+ darts per sec this is so far beyond that
Love this, My kinda content. Keep em coming bro 👍
i know this is going to blow tf up, great project
In 10 minutes, I went from "Adam Savage did mods too. Wonder what this guy does?" All the way to "I can't wait to see what he does next. Subbed. Wait.. what else does he have posted?!?"
cool project expertly videoed, edited and put together 👍 I wish u 1mill subs and here's 1 more 👊
Dip the darts in diesel before loading, add a barrel, and put a lit lighter on the end of the barrel. Fireball launcher!
Very nice idea and execution!
do you just love when you can use a project as justification for a new tool? the best financial decisions are always made in those circumstances
Nice video, well done, and thank you for sharing it :)
Hey man, awesome build, but just one thing to think about. You will need to spin the magazine in the opposite direction you are currently spinning it. The way it spins now will cause the darts to overcome the force of the springs in the magazine. If you spin the other way, centrifugal force will help get them to the top of the magazine fast enough for ejection. Hope this helps, and I hope you make it to your goal of 100 per second!
oh well.. having a 3d printer and the brain to make more use of it than just pre-broken clothes hangers but not having a 10mm drill bit. Classic :) I really like your video!! :)
woohoo! Exciting new series!
A second stage, some spin and a barrel??! Would be amazing. Great job so far. Thank you; 🙏
You earned my subscription,I'ma new sub to this chann because your content is fascinating
That is a fantastic mag design. You might find inspiration in the design of the D-Dart blasters. Their cylinders use plastic leaf springs as pushers and automatically push darts as the cylinder cycles. It takes a tremendous amount of torque to turn the cylinder, but the advantages of not having to synchronize the pusher or have a separate motor for it might be worth looking into. If you do still need a pusher, you might like the Scotch Yoke design used in the Meowser and other flywheel pistols. They can hit 30-50 rounds per second with an otherwise conventional layout.
Epic design and build.
Just found your channel this is my first video but I am planing to watch more now 💚
Super sick man. Keep it up
Ok, I am already wanting one made to look like a Thompson. I don't even Nerf regularly anymore but dang. I can't wait to see the next video.