Hi , I am a 15 year old boy , who will start to build his own affordaplane in a month. Bought the plans and tools just waiting for the aluminium to come . Thank you for this series , this will be very helpful. Wish me luck :)

@gigajames

4 ай бұрын

I'm going to build something similar good luck

@user-pd6ux6sk4k

4 ай бұрын

@@gigajames Thanks I too have changed the project from this to something very similar. Good luck.

@flhxs8364

3 ай бұрын

@@user-pd6ux6sk4k How goes the build? Good luck. : - )

@user-pd6ux6sk4k

3 ай бұрын

@@flhxs8364 I have switched to something else but I've seen the plans of this airplane. It is a bit hard to build and tedious too but it's worth it.

@user-pd6ux6sk4k

3 ай бұрын

@@flhxs8364 I have actually changed the project from this to something else but I've seen the plans of this airplane, those are very well made but the materials needed to make the plane are very very hard to find where I live but still thanks for goodluck.

The wood ibeams is a great idea. They are very stiff and straight. I would put some cross bracing or blocking to help prevent twisting

My husband called and said there was a video with a guy that was meticulous explaining building an airplane. He thought I would be interested. After watching, boy was he right! I’m pumped to get started on this! Thank you!!

Just want to say thanks for all that you do for the home builders it’s great to have someone like you to teach us how it’s done.

Ok, heck with it, I bought the plans too. Jon, I hope you can clear up some questions I have on this thing.

Just bought the plans. Good start! Thanks!!

I've built plenty of things with wood but you really simplified the table for me. Thanks for the video Jon!!!

What a really great idea for the workbench. It's really difficult to understand just how tough it is to get a long table completely straight - until you try to build one for yourself. Nice tip!

Hi Jon. The Affordaplane is what I've been waiting for my entire life. I've got the plans from Dave and will be building as soon as I have a place to make the building table. I have looked at the whole series of video presentations up to number 18. They have been an inspration to get started. I hope to be in contact again soon with some progress news. There are one or two small modifications I would like to try out, and would like discuss them with you if I may. Thank you for a most informative series of video's so far, and I look forward to viewing the rest of them soon. Thanks again.

Yoy always have super fantastic advise! Took me 2 fails before i went with floor joists. Wish i had used the saw horse method. Fantastic!

I love that ur doing an ultralight build I watch a lot of bigger builds but those are outta my budget so I'm super excited to see a great series that actually applies to me great video!

@orbitalair2103

3 жыл бұрын

yes, me too. I could afford this I think. Tho all over youtube I see lots of comments that its near impossible to get the magic 254lbs target.

@salvatoremilitello8490

3 жыл бұрын

@@orbitalair2103 with detailed video and 3d files that will change quickly imho

love your helper. this kit is ex. what I've been looking for thanks.

This technique would be incredibly helpful for Zenith builders. I built a few “EAA Benches” that I made 8’ instead of 5’. I wish I had seen this before...

I built my table much the same way. I could not get the I-joists last July during the covid craze and could not get 16’ glulams, but they had 28’ so then cut them in half and the 14’ supports the two sheets of plywood pretty well. I used hardwood plywood to get a better work surface. The saw horses are quick, but I wanted storage under my bench for the large parts so I made a frame of wood with two shelves. Has worked great thus far. Other than the lack of storage shelves, your design is certainly quick and effective.

Need to add (1) Feline to my materials list. Keep up the great work. Fantastic series and one that will inspire many.

You are awesome,this was one of the best subscriptions I've made period

Going to watch the series to see if building is something I can engage in since I love the design

Great table idea!

Thank you for this brilliant video! Keep up the good work.🤩

Great video; very informative , I have been looking to build my first plane, and this plane may just be the right one for the first project. Thanks

#1, looking fwd for the next one.

Thank you

Awesome! I am continuing the ch701 but finishing the cabin later and starting with elevator and stabilizer. Got burned out doing the cabin. Your CDs helped with the wing though! Can you get with JUST and ask them what the heck is going on with their 103??

Thank you very much, from Colombia, your explanations are fantastic, even I understand 😁

Very nice

Good

Wow, Mr. Croke, you're back, you're welcome!

@karimitchell8454

3 жыл бұрын

It’s Croke !

Great vid👍 This is gon be extremely helpful;)

I would use 3 tgi s bring two out to the edges of ply and one down middle

I like every new vídeo. 🛩️

The problem with building this table today (given lumber costs) is that the table will cost as much as the airplane!

So far it seems very straight forward; I could do that.

Cool

This is going to be a great set of videos, I can't wait to see the whole series. I may have to build on in my garage. Does anyone on have any tips on how to sell it to the wife???

@andrewbetances1203

3 жыл бұрын

Ya, buy the plans and look at them every dinner with a sad look on your face 😈

@abundantYOUniverse

3 жыл бұрын

@@andrewbetances1203 Hahahah!!

@jimwhipple9784

3 жыл бұрын

Tell her you've been working on this for years. It was just covered up with junk in the garage. I have lots of motorcycles...

@ronjohnson9507

2 жыл бұрын

Get her drunk

@arthursoutham9046

2 жыл бұрын

Yes. Keep her happy with her favourite tipple. That should do the trick.

Its time to move from RC aircraft to ultralight. I really enjoy building and am quite interested in the AffordAPlane. I could not find you in Paetron - so, do you have a recommended list of necessary and optional builder tools? Example, I don't have a 'band saw'. A generic description would be helpful. Does the USB drive include some of that detail? Thanks in advance. I've asked my son if he's interested and he's ready to go.

I have the same assistant too !

I bought a set of plans from another designer. He said copying or drawing on a piece of paper is unstable due to temp and humidity. They say paint your MDF or plywood white and draw directly on to the table. When finished with that section paint white again and repeat. That is how I did a Neuport. Is kraft paper easy to get the wrinkles or of a temp/humidity stable? In A&P school we usually had a +/- 1/16" tolerance for sheet metal. I'm not criticizing, just curious.

How can I get the manual?

Love How you build your table how tall is the horses or how tall is from the floor to the top of the table please please keep building .LOL Rusty

Mercie de tous ce que vous faite . comment je peux avoir les plans car dans notre paye on ne peu pas acheter de l internet .nb je suis tunisien

I'm late to the party. I get that. Two questions about the work table - What depth of floor joists did you use, and what is the maximum vertical deflection of the surface have you noticed? I built a torque-box table a couple of years ago that was incredibly stiff and flat, but not easily extendable to 16 feet at this point.

The wood i joists are commonly known as tgi

Oh, man. Time to work up a budget.

Hmmm... thinking mdf would be much more stable than plywood. Probably plywood as a base and then mdf on top.

@ronjohnson9507

2 жыл бұрын

Mdf is garbage

@danielsmith2447

2 жыл бұрын

@@ronjohnson9507 I agree in most circumstances but as a table it doesn't warp like plywood.

🥰🥰🌹🌹😘😘👍👍👍

👍👍👍😎😷💚💚💗👋

Thanks jon, but do really think folks that need advice on building a table should be building an airplane

@FlingwingNZ

3 жыл бұрын

We all started at the bottom once man...

@LTVoyager

3 жыл бұрын

Absolutely. Many will just build an “EAA table” or two without investigating very much. I looked at them and knewI would never get a flat table using dimensional lumber with today’s quality. Using engineering lumber is much smarter and not everyone knows that.

@digdig-cp8lv

3 жыл бұрын

@@LTVoyager so flat lumber equals success. Thanks partner. I'm not picking on you

@digdig-cp8lv

3 жыл бұрын

@@FlingwingNZ yes we did good sir. As the old riddle goes; what goes from 4 to 2 then to 3. A man. Currently building a 750 zenith and a safari 400, side by side. I understand the problem of a flat or level table. It's critical. Thanks. Ps a level line is a curved line, don't believe me, level a line around the earth

@digdig-cp8lv

3 жыл бұрын

@@FlingwingNZ it's circle friend

Your table is cat-approved

Seriously! you didn't mention the fact that you need to level or make parallel both I beams to each other?? You will NEVER get anything "flat" building on a table without doing this!!

@HomebuiltHELP

2 жыл бұрын

Agree. Should have been mentioned

For you know. I from indonesia . I won to build the afford a plane .