My dog steals stickers every time I’m milling! I was splitting firewood yesterday, she decided to steal them as well! Building with green is tough but easier on your tools. Great video as always. Thanks!

@NorthwestSawyer

7 ай бұрын

What are ya gonna do!?!😂

@ProfessionalHomeowner

7 ай бұрын

absolutely nothing ... lol. dogs are the best!@@NorthwestSawyer

Looks good 👍 Jason !! I like the horizontal and vertical metal sheet contrast !! Good to see U finally getting to upper loft framing 😉

@NorthwestSawyer

7 ай бұрын

Thank you! I’ll definitely be up there soon.

I have shop envy. My shop consists of a 2 car garage that houses 2 cars, a washer & dryer, upright freezer, water heater and HVAC equipment so I’ll live vicariously through you. Motivation improves when it’s a comfortable space. Looking good Jason!

@NorthwestSawyer

7 ай бұрын

😂😂😂 I know the feeling! I’m always impressed when someone is able to pull off a project under such dire conditions 😉

That left index finger has all of the hallmarks of a drill slipping off of a screw and gouging your finger. Whatever the cause, you powered through it and made great progress on the shop. Well done!

@NorthwestSawyer

7 ай бұрын

You’re paying close attention!😉 that was actually a handsaw cutting wood that jumped after the cut. It was a mess but but nothing a bunch of band-aids couldn’t handle😬

@davidconaway2830

7 ай бұрын

@@NorthwestSawyer my wife can always tell when I'm working on something because my hands are covered in cuts:-) I can really appreciate your tight workspace, but you're doing a great job with it.

Great to see Steel supports, 2 " X 6" and 4" X 12" beams used in your construction.

@NorthwestSawyer

7 ай бұрын

It’s definitely nice to be able to make my own lumber!

You made a great shop.You'll enjoy your new 'digs'!

@NorthwestSawyer

7 ай бұрын

Thank you! It’s almost 70 in here today. I may have to open a window 😂

There will always be more work to be done than time to do it! Nice to see your progress in YOUR space Jason. Thank you for sharing.

@NorthwestSawyer

7 ай бұрын

Thank you! It’s a much nicer place now.

Progress is progress no matter how Little it is,my Grama used to say that all the time,fun video Jason ✌️ Napa California

@NorthwestSawyer

7 ай бұрын

Thanks, Sean! It’s made a huge difference already.

Great progress, Jason! That should keep you much warmer this winter.

@NorthwestSawyer

7 ай бұрын

Almost 70 in here today😎

Wood work great Fab work great love the metal cladding as is your truck would look cool in there

@NorthwestSawyer

7 ай бұрын

I’d rather see it in the road!😉

Never seen a black wolf before 🐺very sneaky one

@NorthwestSawyer

7 ай бұрын

That’s what my wife calls her😂.

progress....cool

The job that warned my shop should've been the thumbnail lol 😊 keep on keeping on and let your haters be your motivators Jason. Film and upload the good, bad and ugly you never know what will be the video that blows up. Oh yeah almost forgot to COMMENT 😅.

@NorthwestSawyer

7 ай бұрын

It’s almost 70 in here today!😂

Nice work Jason, that went up pretty quick. You got some fancy red tools. Talk with you soon Bearded Brother.

@NorthwestSawyer

7 ай бұрын

Thank you, fellow content creator!

It is very encouraging to all of us to see how you brought order to chaos. We all have projects that we need to get done. Thanks for sharing.

@NorthwestSawyer

7 ай бұрын

Thank you! There’s still a little chaos going on but it’s at least a little warmer😂

I like the steel wainscoting. I will say, I wish I could get something done with my shop.

@NorthwestSawyer

7 ай бұрын

Thank you! Did you see my response about emailing me?

@archiehebron8944

7 ай бұрын

@@NorthwestSawyer not yet. I will look. Thanks.

I built a 14x 20 timber frame shop all out of lumber I Milled off my lot - so satisfying to build your own stuff out of lumber you make

@NorthwestSawyer

7 ай бұрын

Definitely! I’m still planning on a timber frame covered fire pit I started milling for a couple years ago. Maybe this summer will be the year😂

Great job and even more so when you are using material you have produced yourself 👌✅ It’s a nice size shop, one that I would really like to have🚦🚦🚦

@NorthwestSawyer

7 ай бұрын

Thank you! Somehow it’s still too small😂

@hondacrm306

7 ай бұрын

Yes, I can get that😁

Looks awesome Jason!! I so want that garage 😅

@NorthwestSawyer

7 ай бұрын

Thank you! I’m gonna keep it for now😂

Jason good luck with both builds 🍀

@NorthwestSawyer

7 ай бұрын

Thank you!

It’s looking nice and snug …..I wouldn’t worry too much about the cosmetic look of the cladding Jason …to me as a workshop it’s looking great…another job well done 👍👍👍🇬🇧🇬🇧🇬🇧

@NorthwestSawyer

7 ай бұрын

Thank you, Chris! It’ll just be a nice project when I don’t have anything else going on 😉

Good video again and honestly if you think about it you’re not going to spend much time looking at the walls if you’re busy and you will be warm! 😅😅

@NorthwestSawyer

7 ай бұрын

Thank you! I’ll take warm over looks most of the time😂

Looks good to me! Run what you brung!

@NorthwestSawyer

7 ай бұрын

Thank you! I’ve never heard anyone other than me say that😂

Hey your shop is looking good. When you get done putting them walls all up, it should be a lot warmer in that part.

@NorthwestSawyer

7 ай бұрын

Thank you! It’s already helping a lot. Much more comfortable.

Shop is looking great! Helava job!

@NorthwestSawyer

5 ай бұрын

Thank you, Jeff! I can heat it now!😉

@jeffmosher433

5 ай бұрын

@NorthwestSawyer heat definitely makes it more enjoyable!

it all takes time you'll get there

@NorthwestSawyer

7 ай бұрын

Thank you! This was a major step forward 😉

Jason, That totally sucks when you're working on a wall that you need the floor space to build and no room to move stuff! Frustration at its finest. But persistence pays peace and comfort! ( with a few choice words in the recipe !!)... Need a bigger shop? Lol

@NorthwestSawyer

7 ай бұрын

The first thing I learned when I got into excavation was “improvise”. I was originally going to build a 40’x40’ shop. I’m glad I went with 40x60!😂

@JohnSmith-tv5ep

7 ай бұрын

@@NorthwestSawyer yep! And you an ALWAYS build a 40x40 lean-to for an add-on! (You know,...to Air dry all the lumber?)

The struggle is real Jason...keep up the good work! Great video thumbs up.

@NorthwestSawyer

7 ай бұрын

Thank you, Craig!

That will warm you up, makes a lot of difference. We'll worth the effort I did the same thing to my workshop, now its toasty.

@NorthwestSawyer

7 ай бұрын

It’s definitely not toasty but I got it up to 59 which feels pretty good when it’s 35 outside 😉

@MrFHLH

7 ай бұрын

@NorthwestSawyer That's about the same 5emp I have, which is warm enough when your working. I do have a gas boiler to heat it with as I don't want all my machines going rusty. Have fun.

Looking good, Jason. A space conditioned shop is great. I spray foam insulated mine and installed a mini split. It's comfy year-round. And who says you can't put wood back after you cut it off lol? Bill

@NorthwestSawyer

7 ай бұрын

Thank you, Bill! I agree. I’ve had several people mention spray foam which would be great if I didn’t think I’d be changing or adding something at any time. I might finish my shop some day. 😂

Hello There, the last time I sent you a message was quite a while ago. I watch each and every video you publish and look forward to each and every one! For a while you didn’t publish many but over the last few months you are a presence again. I admire the progress you have made and I wish I had access to the beautiful forest around your home. The beam you installed today was gorgeous! It almost seemed a shame to use it for construction purpose but is on display for you to admire when you are in your shop. I so enjoy watching the progress you have made and look forward to all your progress no matter whether it’s woodworking, metal or your neat pickup truck. Merry Christmas and a happy new year. Best Regards Fred Thomas in Skokie IL.

@NorthwestSawyer

7 ай бұрын

Thank you, Fred! I got a little busy for a while there but it’s been nice getting back to making regular content. I appreciate your support and merry Christmas to you and yours as well!

hang tarps over those holes, and that insulation at the bottom where its short, visqueen whatever you have, seal er in..

Here in the South an air conditioner would be more useful. It doesn't get extremely cold most winters, maybe a few days here and there. On the other hand we get probably half a year or more of 80-90F weather.

@NorthwestSawyer

7 ай бұрын

You’ve got that humidity too which makes it feel a lot worse.

@JohnClark-tt2bl

7 ай бұрын

@@NorthwestSawyer You are not kidding there...🥵

If you add wood strips, they could be French cletes. Just a thought...

@NorthwestSawyer

7 ай бұрын

I actually thought about that! No need the waste all that space. 😉

My hubby wanted to share how to avoid buying pressure treated lumber for ground contact application. He said thinly coat pine lumber with black roof sealant, cheapest brand you can get. Then wrap it with roof paper then anchor to concrete, sometimes he drills very few 1/8"in. holes and fills it with any type of petroleum based liquid. Burnt diesel oil works great, bugs & termites wont touch it, just a thought. Save your when doing oil changes on you equipment or vehicles. CHeers

@NorthwestSawyer

7 ай бұрын

That sounds way harder than buying PT lumber😂 I like to mix my used oil with sawdust. It turns my wood stove into a rocket stove and heats the place up quick.

Funny as I was planning to give you a thumbs up anyway towards the end of the video (as always due to your commitment, hard work and consistently great content 👍🏼😎) but I immediately gave a thumbs up when the “wood thief” came on the scene 😁😂 I’ve got a couple of my own that will steal the chunks of wood then play a good game of what we call “who gets the chunk” 😂 usually they both wind up winning because I’ve got more chunks of wood laying around. Hope you and yours had a great holiday 😊

@NorthwestSawyer

7 ай бұрын

Thank you, Hugh! We did!

Putting a heater in my shop was one the best things I've ever done. 60 degrees out there I'm in jeans and a sweatshirt and nice and warm

@NorthwestSawyer

7 ай бұрын

Nice! 60 degrees when it’s 35 and raining is perfect working weather.

Proceed with cautuion Jason! That beautiful shop is going to create a strong vacum that will suck more and more expensive wood working tools and machinery into it, necessitating a larger space. All kidding aside, it's looking awesome. Also, I would like to gift you some Osage orange and old growth heart pine to turn on your lathe. How would I go about that? John.

@NorthwestSawyer

7 ай бұрын

Wow, John! That would be awesome! The best way would be to drive one of your classics out to me!😉 or you could email me to 5tonfabrication@gmail.com🤓

@butternuthillfarm1599

7 ай бұрын

@@NorthwestSawyer I sent an email.

@NorthwestSawyer

7 ай бұрын

@@butternuthillfarm1599 I haven’t gotten your email?🤔

You need a bigger shop. LOL

@NorthwestSawyer

7 ай бұрын

Exactly!!

what kind of heat you got in your shop, great video

@NorthwestSawyer

7 ай бұрын

Thank you! I have an old cast iron wood stove. I got the shop to almost 70 today. Never would’ve happened before.

You wear a lot of trade hats: Sawyer, equipment operator, carpenter, welder, tin smith, janitor, wood working, etc…..did I miss anything? Good job.

@NorthwestSawyer

7 ай бұрын

Mechanic?😂😂😂 thank you, Robin!

@mikepagliei426

7 ай бұрын

Comedian 😁

@NorthwestSawyer

7 ай бұрын

@@mikepagliei426 now THAT’S comedy😂😂😂

Next do a rv shed

@NorthwestSawyer

7 ай бұрын

I have a TV planned😉

👋🏼

@NorthwestSawyer

7 ай бұрын

👋🏻

the lines across the screen are apparently caused by the LED lighting, there is a way to fix it, as I have seen other channels deal with this.

@NorthwestSawyer

7 ай бұрын

I had a feeling. It probably has to do with the frame rate I’m recording in. I’ll have to look into it.

LIKED ❤️❤️❤️❤️❤️❤️ WATCHED 🧡🧡🧡🧡🧡🧡 COMMENTED 💛💛💛💛💛💛 AND SUBSCRIBED 💚💚💚💚💚💚 TO ALL YOUR VIDEOS 💙💙💙💙💙💙 HAVE A GREAT MORNING 💜💜💜💜💜💜

@NorthwestSawyer

5 ай бұрын

Thank you, Sue! You too!

Hey! I am about to do something VERY similar! You are welcome to come help 😅

@NorthwestSawyer

7 ай бұрын

On my way!😉

@TheOldJarhead

7 ай бұрын

@NorthwestSawyer I'll hold ya to it!!! Nice work on the shop! Now, don't forget a stool for me near the Woodstove 😉 for my annual visits!

You're supposed to nail yhe insulation, not the fingers. Lol. JK

@NorthwestSawyer

7 ай бұрын

😂

I am number 70 for likes, sorta surprized I am not 270.

@NorthwestSawyer

7 ай бұрын

Thank you! It’s early 😉

It looks like a shop. Not too pretty.

@NorthwestSawyer

7 ай бұрын

Well, then I nailed it 😂