Building Revell 1/24 Dodge Viper GTS scale model car kit Full build step by step MOD ASMR 1/25
Автокөліктер мен көлік құралдары
DODGE VIPER GTS COUPE
Here's my new build, 1st gen Dodge Viper GTS Coupe! I saw this super cool Viper on Instagram; @sebastienpolit, and I really wanted make one. Time to build an American car and this was the perfect candidate.
Unfortunately, Tamiya or Aoshima never made Viper kits so the only Viper kit available was the Revell kit. It's not a good kit to be honest, quality is not good, lack of details, panel fit is bad, bad decals, and it's a 1/25 scale, so it's bit small...
Basically, a bit challenging kit to make it look good.
Overall, it came out pretty good, I only wish the wheel was 19" instead of 20". This Viper is 1/25 scale so 1/24 20 inch wheels looks little bit too big to me.
Nevertheless, the result looks pretty good and it was a very fun build!
I have a Instagram account where I post building processes so come check it out please.
Instagram: @modelcarmod
modelcarmod?utm...
Model info:
1/25 REVELL DODGE VIPER GTS COUPE KIT WITH AOSHIMA K.BREAK HYBREED FIVESTA 20INCH WHEELS
EXTERIOR: TS-19 METALLIC BLUE
INTERIOR: TAMIYA X-18 SEMI GLOSS BLACK
Video index:
00:00 - 00:54 INTRO
00:54 - 01:38 UNBOXING
01:38 - 05:01 BODY PREPARATION
05:01 - 08:28 BODY PAINTING
08:28 - 14:07 INTERIOR MAKING
14:07 - 17:56 ENGINE & WHEELS MAKING
17:56 - 18:44 HOOD HINGE MAKING
18:44 - 21:08 BODY POLISHING
21:08 - 23:35 WINDOWS & TRIMS PAINTING
23:35 - 26:18 CHASSIS MAKING
26:18 - 28:35 FINAL ASSEMBLY
28:35 - END GALLERY
Tools list:
3M HAND GLAZE WAX
5ML MODEL PAINT DROPPER
ALCLAD II LACQUER GLOSS BLACK BASE, CHROME
DETAIL MASTER FLOCKING BLACK
DIGITAL CALIPER GAUGE
DUPLI COLOR PRIMERS GRAY, WHITE
EVERGREEN SCALE MODELS STYRENE SHEET
GOFER RACING PHOTOETCH PARTS FOR THE SEAT BELT
JOHNSON'S BABY POWDER
IWATA AIR COMPRESSOR
IWATA HP-C AIRBRUSH
MADWORKS MODEL SCRIBER CHISEL
MICRO DRILL BITS
MICRO DRILL PIN VISE
MICROSCALE MICRO SET, MICRO SOL
MICROSCALE MICRO MASK
MR HOBBY MASKING SOL
MR HOBBY SUPER CLEAR UV CUT
SANDING FILES
SCALE MOTORSPORT CARBONFIBER DECALS
SILPAK 5MINUTE EPOXY
TAMIYA CEMENT
TAMIYA EXTRA THIN CEMENT
TAMIYA FINE SURFACE PRIMER
TAMIYA LACQUER THINNER
TAMIYA MASKING STICKER SHEET
TAMIYA MASKING TAPES
TAMIYA MODELING BRUSH HF
TAMIYA MODELING BRUSH HG
TAMIYA MODELERS KNIFE
TAMIYA PAINT RETARDER
TAMIYA PAINTS XF-15, X-11,X-12, X-26, XF-1, X-18, X-7, XF-70, X-27, XF-66, X-23, XF-7, TS-29, TS-86, TS-7, TS-19, LP-11
TAMIYA PANEL LINE ACCENTS
TAMIYA PLASTIC SCRIBER
TAMIYA POLISHING COMPOUND FINE
TAMIYA POLISHING COMPOUND FINISH
TAMIYA POLISHING SPONGE
TAMIYA SANDING SPONGE SHEET
TAMIYA TWEEZER
USCHI METAL POLISHING POWDER CHROME
ZAP A GAP MEDIUM FORMULA GLUE
Thank you for watching this video! :)
Пікірлер: 90
Idc what anyone says, the Viper was wayyy before its time and still to this day in 2022 one of the coolest car ever built. 😎
props to this guy for filming and editing. working on the car already seems tedious as hell so filming and editing at the same time would drive me insane.
You not joking pal! Nice work! 😎👍
WOW talk about a professional job very nice !!! This is my favorite car in the world !!!
Man, I thought that thumbnail was a real car!🤪 stunning build!👏
@fbodyblack
2 жыл бұрын
I searched the comments just to make sure i wasnt alone in thinking it was a real car. Lol
Jesus Christ. I’m speechless again.
Man, those details are crazy. You deserve more subs.
The GTS will always be my favorite car, watching this was definitely inspiring
90s legend. Thanks for sharing this build.
Cant get enough of your vids
awsome!
Not sure how I’ve ended up here but thoroughly enjoyed watching this. Great job
Beautiful paint work
Watched every single second of this video. Pure pleasure. Real masterpiece. Congratulations, great build.
Loved this build. So glad I found out that you did a video. It'll help me a ton on mine.
You are a very talented builder. Watching you build inspires me to to push my own limits. Great build my friend, keep up the great work
that was perfect
Best model build I've seen so far on total KZread I mean it as I say it Wow
Absolute stunning build. Love the attention to detail.
Fantastic build! I love the details in the interior and engine. Learned a lot watching this video. I'm going in incorporate some of these tips in my builds.
Stunning build and beautiful photography
The attention to detail, that paint looks awesome! Wow, as a Mopar fan, this build is so beautiful, great job! 👏🏻
Awesome! Great Details added. This Model is also on my List and already in my shelf. Thanks for the inspiration how to build it 👌🏼
You have done a very nice job on this kit. I just finished the AMT/Ertl Viper R/T 10 kit and it has quite a bit more detail than this particular kit. The AMT version has seperate suspension and drive line components and was a nice build. I would recommend it for anyone looking for a challenging kit.
Great technique for fixing panel gaps
Beautiful work, I really enjoyed your detailed video. The end product is gorgeous and seeing the progress with the products and techniques used is great! Count on me viewing more of your builds 👍
awesome build. Some lovely detail added 👍🙌
What a master piece. Super good job.
Fantastic Build!!
Beautiful build of a beautiful car.
Very Nice Build!!! Well Done!!!!
Very nice build!!!
Great build. The paint color came out fabulous 👌
@diecastify
Жыл бұрын
the painting job never fail to impress us
Looks like a beauty bro good job I just started my first car it’s a Ford lighting from 94
Amazing!! 👍👍👍
Awesome looking build, just found your channel and subbed you, looking forward to next build. Rick 😎✌️
Bravo
I will study a lot. 👍🛎
nice work!!!!
Épico. Pronto haré el mismo modelo y solo espero que sea una mitad de lo que tú has conseguido. Felicidades
Simply. Freaking. Amazing.
awesome!
Já ativei o sininho para receber mais vídeos como este
Awesome!
Amazing job!
Exquisite
Nice👍👍👍
Nice
Fantastic build- really enjoyed the video! May I ask where you got the instrument dial decals from please?
Revell kits are hit or miss with the molding, prefer AMT most of the time, the AMT Supra is a decent one. Quite a bit of flash to trim tho, but it's a solid kit
How can a spray can painted Revell kit look like that? Just unbelievable
Love how you did the hinge. What is the products used for the hinge
Basically legos for adults?😂👍🏼
We'll never know >if god exists >if universe is infinite >why Revell builds kits in 1/25 scale
I love watching your process and it inspires me to put the same attention to detail into my kits. May I ask what the purpose of spraying Duplicolor, then Tamiya Fine primers? Was it to simply be able to see your white primer over white?
@ModelCarMods
2 жыл бұрын
Thank you for the compliments! It's better to use different color primers because when you're wet sanding, you can see how deep you are sanding when the dark primer underneath shows up. I like using Dupli-Color primers because they are very thin and sticks to the body really well so it's very good base primer. Tamiya primer is bit thicker which is good for wet sanding👍
I turn a burago 1/18 Viper GTS into a Michigan State Police car about 10 years ago and now i have a C7 Corvette Michigan State Police car
Love the car and awesome build. Why did you put seatbelts in like that though?
@ModelCarMods
2 жыл бұрын
Thanks!, that's how they are on real Vipers👍
Did you use Model Master Metalizer Buffing Aluminum Plate for your wheels.
Where did you get the aftermarket gauge decals from?
👏👏👏👏👏😉
You did a really nice job with this! The only thing I don't like about this kit is the horrible hood fitment and the very poor headlight design, its not very realistic.
hello, please tell me what kind of thin tube you have? I collect 1/6 weapon models, I need such a tube as a barrel
Wow beautiful build!!! Just getting into the hobby and hope to get to this level one day. Quick question (s). What thinning ratio do you use for airbrushing tamiya paints and I noticed you using different types of glues. Is it all trial and error when to use a different type of glue (epoxy, superglue, cement)?
@ModelCarMods
2 жыл бұрын
Thanks for the compliments! I usually do 50:50 ratio paint : thinner, and adjust thinner as i spraying. For the glues, i recommend the ones i use on this videos, and yes it will take some trial errors so always try it on the spare parts first and see how it sticks🙂
@MrBowlingjt300
2 жыл бұрын
@@ModelCarMods thanks so much for the reply! One last question I have is what model/brand spray booth are you using? Been looking for one but they all say not intended for use with flammable paints etc.
@nismojukerich2994
Жыл бұрын
@@MrBowlingjt300 they are all basically like that. Basically because explosion proof fans are extremely pricey and without one there is an, albeit small, risk that if the wiring is not enclosed or spark proof and the fans blades and housing are metal and they happen to contact they could cause a spark igniting the solvent vapor buildup in the exhaust duct. You can get one of those cheaper spray booths and add a second fan with a good cfm rating into the duct and that will reduce the risk even further just for the peace of mind as it won't allow the vapor to just sit still in the duct if the spray booth doesn't have a powerful enough exhaust fan to push it out. You can use solvent based paint just be cautious.
How long does one can of the clear last? Will it do a whole car for a couple coats?
@ModelCarMods
2 жыл бұрын
I usually use Mr.hobby super clear UV cut spray and it can do 2 cars no problem👍
How did you get the hood to sit flush. I'm having a hell of a time
@ModelCarMods
2 жыл бұрын
I adjusted them before painting and filled the hood gap with putty👍
Great vid, where do you get your gauges decals please??
@ModelCarMods
2 жыл бұрын
I purchased at Ebay here's the link www.ebay.com/itm/Model-Car-Detailing-Parts-Tachometer-Gauge-Switch-Panel-Decals-1-24-1-25-Scale-/185163871730?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
@stephenambler2690
2 жыл бұрын
@@ModelCarMods thank you
Why not scan the kit decals into your computer and print new ones?
Where can i buy this model ? 😅
Could you recommend decent models that don’t require painting?
@ModelCarMods
2 жыл бұрын
Aoshima makes some 1/24 Pre-Painted kits, bit pricey but the quality is pretty good. All other nomal kits will require painting👍
ABSOLUTELY INCREDIBLE. I am amazed at your mode building skills and I loved the video, too.
That amount of panel gap correction though...
Name of the song at the end ?
Is it optional to use the super clear paint?, can i also use tamiya clear?
@ModelCarMods
2 жыл бұрын
You have to spray clear coat to protect the paint and to make the body shiny. Yes you can use Tamiya clear coat, I just prefer Mr.hobby clear coat👍
@ivanov9245
2 жыл бұрын
@@ModelCarMods dankeshön, I'm a beginner at modelling cars :))
Salut my friend super car super video subscribe subscribe .
Where go you