Can you do a similar video for your patrol rifle?

@michaelkoontz2232

Ай бұрын

I second that

@E.IS.M.I.A.

Ай бұрын

Third that

@c-jam6392

Ай бұрын

He has a video from awhile back going over his ruger ar556 patrol rifle that his department issues but this was more towards the beginning of the channel awhile ago so idk if that’s what he’s still running.

@HeavyIronsProduction

Ай бұрын

this please

@andrewschulte3024

Ай бұрын

yup

This is a lot of money, but the guy puts his life on the line and it’s completely worth it. Still cheaper when a Korth revolver or some Gucci 2011s. Great video, thank you for all the details and for giving me some food for thoughts.

@hardwire1013

Ай бұрын

Personal opinion. Other than MAYBE staccatos, I wouldn’t trust a 2011 for concealed carry. Tolerances are way too tight. The smallest debris especially in the higher end ones can choke them up.

Video on your personal do all AR AND SBR, I think you just gave a general idea in past.

I’m a lot luckier than you when it comes to Glock stock controls. The mag releases, slide stops, and trigger (except for the G48/43x) all feel pretty good to me and my hands. The only internal parts I replaced on my G45 were the safety plunger in the slide and the trigger bar assembly. At 500 rounds, the gun started to develop this real annoying “double wall” feeling where it would feel like the trigger broke right before it really did. Diagnosing at home with an empty gun, I took the plunger and extractor off, reassembled, and the second wall feel went away during dry fire. Turns out, it was the trigger bar where it was pinned to the trigger messing up that was causing the issue. I now have a spare safety plunger for this gun. Both parts were replaced with Glock OEM parts because safeties are not to be messed around with. Gun runs great now.

Thanks!

Photonic barriers are a thing. Quality low light classes from experienced and knowledgeable instructors are a eye opener as to what works and what doesn't in real life conditions (where you'd end up actually using a WML, or handheld, for that matter).

@unclefreedom213

Ай бұрын

Yeah they are very real. I am a huge fan of lowlight and teaching lowlight. There is just a ton to it. But once you see the matrix so to speak it's life changing in how you fight in the dark

ive carried g45 for few years now and its perfect, my fav handgun by far.

Good Video thanks. I definitely get a little carried away with some of the ways I outfit my pistols but that is next level, and completely logical and well reasoned. Appreciate the transparency and efforts be well fine sir. Edit: Oh as non-LEO I carry a p-01 with cajun kit, eps carry optic, using HST 124s, appendix in a Trex sidecar holster or a sig p365 no model as it built it out of separate parts, but icarus frame, spectre comp slide/barrel and 407k optic running HST 147s in a QVO rig (sometimes in a fanny pack not on a belt still in holster when it's hot in the desert). Both were vetted with hundreds of rounds and multiple sessions of hollowpoints, but not your counts more like 500 fmj and 50-75 carry.

That's great your police department allows you to carry your own firearm and set it up the way you want it. Most departments, including mine, doesn't allow you to do anything to your duty firearm or patrol rifle. I think its stupid. If it helps you shoot better and be more accurate, and its safe, it should be allowed.

@TriggaTrey361

Ай бұрын

Typical power trip happens all the time people actually modifying their weapons have way more training than a regular cop in my opinion

@unclefreedom213

28 күн бұрын

That old school gotta be stock mentality is cancerous to agencies. The old school guys are now retiring or finally seeing the light and the lowering of liability because the guys shoot better.

@RebelViking912

26 күн бұрын

@@unclefreedom213 thanks for the reply!

i bought a G45 almost a month ago in Battlefield Green and its my favorite gun now and my EDC. Its literally perfect.

@unclefreedom213

Ай бұрын

oh my I had to Google that.... sexy

@doncarrera601

Ай бұрын

@@unclefreedom213 I have a short video of it on my page

I have a similar setup on a G19x and was looking at that comp. Does your 45 fit in a G17 Safariland holster with that ramjet installed? I haven’t bought an owb holster for it yet

@unclefreedom213

28 күн бұрын

Yes it does with zero issue

First let me start off by saying..... Love the shirt! Those guys are the greatest. I get most of my patches from them..... Vet owned and operated.... forward thinking.... On to the build.... Very niiiice, well thought out. I have yet to shoot a glock with a ramjet on it. I have comped pistols but none of them are Glocks. Thanks for sharing. Just sub'd.

I had really bad luck with my kagwerks slide stop. It wouldn’t lock back on my 19 at all on any of my mags. Swapped back to OEM and had zero issues.

I went with 10mm varieties b/c large 4 legged threats are equal to or more common than the 2 legged kind where I live . I just wish we could get some of the nicer comps like the ram jet for 10mm which actually needs it.

@unclefreedom213

Ай бұрын

KKM makes some but they are long and chunky like g19 becomes g34 length

@darkgardener9577

Ай бұрын

@@unclefreedom213 They look and sound like good quality stuff, but yea, it's kind of defeating the purpose of the compact. Thanks for the suggestion though, I probably will get some of their stuff for the G40.

Do you consider the Agency trigger shoe to be better than the Overwatch and if so why? I did the whole overwatch np3 and trigger shoe kit and have been impressed with it but I’ve never tried any of agencies products.

I often wonder why not go with a full size barrel if we’re just gonna put a full size light that extends out past the muzzle anyway? I have the same thing but wonder why I didn’t go with a 34 instead when I think about it.

Great video!

Le here too and building out a 47 with mps for work but with the esd magwell

Excellent videos. You’ve gained your knowledge through experience and you’re sharing it with us. I didn’t realize you were an affiliate of psa. It’s unfortunate. I just spent ~$900 with them over the past week.

I shot this pistol yesterday. All I can say is wow! I see the ramjet in my future.

The problem I find with running red dots on pistols is the guys who don't put in the trigger time and think the red dot makes up for it.

@georgebarnes9204

Ай бұрын

I always hear people say this and while I can't speak for others, after zeroing my MPS on my glock 17 I did immediately shoot better and faster

@TriggaTrey361

Ай бұрын

@@georgebarnes9204Some people only say this because they have never shot with a red dot to begin with. Anyone that has knows how much of a better shooter a red dot can make you.

I have a very similar pistol set up. I had a few fte's with some cheap monarch 115 last weekend which was disappointing. However I normally shoot blazer 115 and that gave me zero issues. I'm probably going to put in a polydat trigger and possibly the owp connector as well soon.

My duty gun is now a 17 (again): Nomad Defense 9F frame, Zev Citadel Slide, Radian afterburner/ramjet, Holosun 507comp, Johnny Glock Vex Trigger, Angry BearArmsBUIS. My backup gun is the same, but a 9x frame. Off duty carry is a CZ Shadow 2 Compact with SRO.

Still building mine out atm. Sig p320 base Apex forward trigger bar kit, and tlr1 so far

SLR is a great company. I buy all my mag extensions from them. I should try the magwell. Beautiful setup.

I carry a glock 32 in a workz appendix rig with xs dtx2 big dots loaded with critical duty 135g and i love it! When im in the mountains of tennessee where there are bears i run underwood extream penetrator. 357. Sig is expensive but it works well for what use it for.

Cool build out. For a future build I want a g17 grip from nomad defense with an agency or arc slide probably a RCR or rmr HD on it. A comp of some type for sure. Probably not getting that for some time I am still finishing out a build on a Walter pdp pro sd and getting a new slide for sig macro. Along with doing some work on a few cz I have so with so many projects things do tend to go slowly.

Nice breakdown.

I just got an overwatch precision mag well for a 34 gen 5 I've been tinkering with. I'm not a dude who normally goes much beyond sights and maybe a 3.5 - 4 pd connector on a glock.....I have had mixed luck over the years with triggers. Apex= good to go but didn't like the feel.....Agency syndicate= good for a while then failures to reset. Tyrant= bad from the start BUT it was an old gun with a lot of rounds and I didn't give it much love in the "trouble shooting" department. Lol. I usually like a stock trigger with a minus connector and a dot (rmr) or Ameriglo troopers or hackathorns. Anyway, I like the SLR a lot....looks cool to not that it matters. I usually stuck to Zev mag wells, but I REALLY like the O.W.P. If you ever get curious try the over watch mag well brother.......I beat on mine for around 400 rds. out back today, I'm loving it so far. Greetings from KY.

Id love to see what sworn agency would allow the leniency for their officers or deputies to carry a "custom" duty weapon...i personally have worked for 3 different agencies sworn...and NONE of them allowed us to have mods on our firearms other than night sights...and a hogue slip on.... (this was in Kentucky) boy how have times changed...ive seen as lenient as an "approved list" but never "custom"..lucky you! Stay safe brother!

@mesa50w

Ай бұрын

Idk man I think anyone carrying a firearm for protection both Leo , civ , mil .. it should be a stock item and not bubbed up .. now a range blaster or a uspsa blaster .. sure so all out .. 2lb trigger with all the bells and whistles you can cram on it ..

@gkevinspencer

Ай бұрын

The FBI HRT use to issue a custom 45. I use to work for the second largest agency in my state and I carried a custom Novak

@unclefreedom213

28 күн бұрын

Pretty common now what you're describing as is a result of the first reply which is if it ain't stock you can't have it. It's a severly outdated mentality right up there with no lights on handguns or dots on handguns or rifles. There are still some agencies but as these older chiefs either retire or get shown why the mods are important. It's changing. My agency all mods have to be done by the armorer (which is me) ensures subpar and unsafe mods aren't allowed to happen. In this world any and all things that make you better and more accurate are a welcome addition

@mesa50w

28 күн бұрын

@@unclefreedom213 well for 99.9 percent out there the best mod you can do to make you more accurate is the nut pulling the trigger .. so no mods will over come a bad shooter

@unclefreedom213

27 күн бұрын

@mesa50w this is 100 percent accurate, that's why I beat on it so hard with the comp. I see it over and over. shooter build solid fundamentals shooter buys comp shooter gets lazy with grip shooter struggles to gain benefit shooter blames comp shooter takes it off shooter has a million bad habits to fix

I run a nearly identical set up. Just a stock trigger and it’s an mos with an fcd plate. P2 Slr magwel Kagwerks slide stop etc. my slide stop ate the shit out of my slide but it’s smooth now.

The only thing i did with my g17 gen5 mos was put the holosun on it and every now and then a light. But i keep it simple. I did want the comp but it's not needed really. I'ma civilian so i really don't need a lot of extras. Great video.

How many rounds have you got on the kagwerks and has it had any issues?

Glad someone else uses the 135 gr Hornady! It runs well in my pistols

I have the same rig with an SRO and different trigger work. It’s good.

Started playing with 80% builds back in lockdown and I settled with SCT lower (not 80%, Strike Ind. liteslide (no plates) holosun ACESS valcon(first red dot),Apex duty trigger, Ballistic Advantage bbl. It fits the Blackhawk T holster. Of course not all upgrades done at once so rounds still counting @1500ish

Thing is dope.

I did the same thing. Lol. The modern Rolland special

Tactical pontoon triggers are drop in with the discso.. What wasn’t mentioned is some discos allow the trigger to be pulled and the striker drop before the barrel is fully into battery. May be more of a gen 3-4 thing? I haven’t fooled with a gen 5 yet

I own a lot of Glocks. I carried a Gen2 31 for 20 years every day. I'll never daily carry one again. The grip angle actually causes compression between my little finger and wrist that, not infrequently, causes my hand to lose all sensation for a short period. I can look at the hand and see what it's holding, but I can't feel it. I can tell the index finger to squeeze, and it will, but I can't feel it.

No longer LEO so my “duty” is my concealed pistol. Currently, it’s a Glock 49. SRO on a Forward Controls plate. Trijicon suppressor sights. TRL7A light in a Tenicore holster. Everything internal is stock for now but that might change.

You should look into getting the radian compressor spring and running the 15lb spring which is what everyone recommended for that comp. Radian designed it for that comp specifically just to take the reliability even further. I have the same build but with the compressor spring in my opinion i would rather buy the spring over the comp. To me from my testing the spring made more of a difference then the comp

Good video Brother/G\

I freaking love the ow connector i pair it with everything ow shoe agancy shoe and of course my favorite the apex i have longer fingers and the apex just sits a little more proud than others .

Meprolight now has a closed dot and its 300$ I hear its solid

@sleigh4019

Ай бұрын

So for the last 2 decades cops can't 300 lm trl1 but today we can't use a 500 sub trl7 ..sure

I wanna know what brand and make of that sight in the thumbnail.

@unclefreedom213

Ай бұрын

the sight on the pistol? Aimpoint ACRO P-2

@jasonhorton4778

Ай бұрын

@@unclefreedom213 thank you Sir, I truly appreciate the follow up!!

10:55 is that the flat faced trigger shoe and trigger bar?

@unclefreedom213

Ай бұрын

yes agency cleans up the factory bar and it comes as a unit

TLR7 is an EDC light not a duty light

@fro-yo-momma7082

Күн бұрын

When you have to use your edc it becomes a duty light

@datboi__

Күн бұрын

@@fro-yo-momma7082 depends what you're using it for. For "every day carry" (CCW) it's just fine. You're not using it in an offensive capacity, it is strictly a last line of defense when all other options are either unavailable or exhausted. For that use TLR7 is *good enough*

Staccato P $2500 with 5 mags, X300 turbo weapon light $300, Leupold DPP $400.

Hi. What sights did you put on it ?

@unclefreedom213

14 күн бұрын

@@JanosikNH the irons are ameriglo gl429

@JanosikNH

14 күн бұрын

@@unclefreedom213 thanks

Why g19 slide if you have full size light and grip? Weight savings?

@unclefreedom213

Ай бұрын

to me it has far better balance, I also have very large hands and I can swallow up the g19 grip. I always run the full size light so the length doesn't impact me when carrying. I own g17s, g34, g22 etc. I can honestly say without a doubt that the way this cycles is just better. Something else to keep in mood is less reciprocating slide mass with longer grip means flatter shooting

@michalbarsfajny4268

Ай бұрын

@@unclefreedom213 makes sense, cos somehow I like g19 recoil better than g17. But I have small hands so g17 grip for me is way too long

@Masta_E

5 күн бұрын

The g45 is one of those guns that on paper makes no sense but in practice is one of the best feeling and shooting Glocks you can buy.

u should do a tattoo tour i see some pretty sick ones

I always thought cops had to run a full size handgun

@chaoticcaninejb

Ай бұрын

It is a full size. Basically a G17 just shorter slide of which does t matter when running RDS.

@Superbatman93

6 күн бұрын

@@chaoticcaninejb I mean like 17 size

What lodge are you a member at? Are you Free or Ancient? Appendant bodies?

@unclefreedom213

Ай бұрын

A.F.A.M.

Seems like the Shadow Systems xr920p could've saved you a lot of money, time, and effort... but I do understand the appeal of self builds...

🤘🏻

Gotdayum!!!

I heard glock is done making the 17's and will now replace with the 47

@unclefreedom213

28 күн бұрын

highly doubtful

@J.Young808

6 күн бұрын

It’s the 17 MOS that got replaced, the 17 irons only is still being produced. I got one of the last 17 MOS’s and run it with a Holosun SCS and Night Fision Costa Ludas irons. I do like what you said about using blacked out sights to not have a second focal object. My “competition gun” is a CZ P-10F cut for my 509T and I don’t have any irons on it. I really wish I could shoot my Glocks better, I am low left with them (righty) since there are so many out there. I shoot my P-10’s, S&W 1.0 9L 2.0 5” (Apex SRT on both), Archon Type B (Gen1), STI 1911 all better than my Gen3G19 & Gen4G34.

Hello

Glock sells 24 rd mags for their double stacked 9mms for like 30 bucks, save some money on extensions. Why not go with the glock performance trigger? Its hard for me to justify 100 dollars on a flared magwell on a gun that already has a flared magwell built in, especially if i need to conceal it.

Great video

Why do people prefer the 300B bs quick release ?

Connectors do drop the trigger pull weight by the amount of pounds difference from the part it is replacing. So a factory 5lbs connector giving 6lbs pull will give 4.5lbs pull with a 3.5lbs connector.

@unclefreedom213

Ай бұрын

sometimes but definitely not on this one or the last several

@chaoticcaninejb

Ай бұрын

They don't necessarily drop weight, they change pull which a byproduct may me less weight, but not all and not all glocks.

@alexskillz45

Ай бұрын

They absolutely change the trigger pull weight all the time or else they wouldn't reference a weight to them. They are like levers, levers reduce the weight of whatever they act upon.

@chaoticcaninejb

Ай бұрын

@@alexskillz45 ok

Cool. Now swap that trigger with a RAMM tactical.

Your sister called !!!! Return her glasses asap!!

I'd say a Taurus Gx4 carry or Canik Tp9 SF Elite is a better buy with better triggers and reliability, just $300, use the rest of the money for ammo and gear, paying a fortune just for Glocks name is crazy lol

@chrism2042

Ай бұрын

Serious? I have owned Glocks since the early 90's, but not a fanboy, my go-to has been M&P's for several years. But, you put the Taurus and Canik at the same reliability standards as Glock? $600 isn't paying for Glock name, it's paying for reliability, it just works. People paying $2500+ for a pistol are partially paying for a name.

@AJohnSmith

Ай бұрын

Glornk

🔥Please let us know what's the best way to contact you regarding potential collaboration

aluminum mag releases eat your mags. deal breaker for me. soon your mags will start dropping out randomly because the release chews away at your polymer mag.

@bobbyb608

Ай бұрын

I was going to make a comment saying no shit.. but I guess common sense isn’t so common anymore😊

@seaocean4868

Ай бұрын

@bobbyb608 i did the dumb thing and thought " everyone seems to run em, even LEOs and veterans so it must be fine" i fucked around and found out.

@unclefreedom213

28 күн бұрын

Yeah it can but have yet to see it on mine and some of my mags are 10 plus years old. I can think of 3 in particular my og that came with my gen4 g19 probably close to 7 or 8k rounds on each mag no issues at all. Now steel or sharp beveled mag releases yep it'll chew the shit out of em

@seaocean4868

27 күн бұрын

@@unclefreedom213 thats good to know. ive been using the hyve ones they do have sharper edges now that you mention it. things ate up my mags after not too much use.. it sucks because i hate the stock mag release. btw the SLR magwell is awesome. makes the G19 much more usable and stable in hand. Expensive but worth it.

@unclefreedom213

27 күн бұрын

@@seaocean4868 SLR is by far the best magwell I've used and will be my main one going forward. Yeah I have a Hyve on one and it would get stuck on mags so i ditched it. Thats the issue I have with shield mags is having to use the steel mag release which is a no go for my factory mags. i use the PSA micro 15 round mags now and no issues so far one of the mags has 5000 rounds through it

Are you mason? G47mos here btw.. appreciate the insights.

@unclefreedom213

Ай бұрын

I am and am also building a G47

Dang bros a mason

@unclefreedom213

Ай бұрын

yes I am. I do love hearing folks tell me how evil an organization it is... That's also how I know they aren't a part of it

@MrdeweyRhayes3

Ай бұрын

Love your content. But the information is out. You choose your side.

What's up with that tattoo on your left arm, Kimosabe? 🤔

@revolutionanarchy713

Ай бұрын

Cross on one and free mason on the other 🤨

@unclefreedom213

Ай бұрын

​@@revolutionanarchy713Cross is a Maltese I was a firefighter and yes I'm a Mason

@unclefreedom213

Ай бұрын

I'm a Mason

@revolutionanarchy713

Ай бұрын

@@unclefreedom213 good to know.

@JohnLocke1776

Ай бұрын

Why?​@@unclefreedom213

Glornk.

Stop it about of sell my surplus hammer fired guns for a this exact model.

The Ramjet made it a Glock 17 😂

@unclefreedom213

Ай бұрын

Which is awesome fits in all G17 holsters and I have the benefits of the comp

Whole lotta nothing.

I would have just purchased a Canik Elite Combat , wait a minute , I did !

@AJohnSmith

Ай бұрын

Nope.

@ashtonb.2001

Ай бұрын

Canik is not approved by LE

@unclefreedom213

Ай бұрын

​@ashtonb.2001 amen they're awesome range toys and comp guns though

@ashtonb.2001

Ай бұрын

@@unclefreedom213 agreed

@GabrielCarterEGA

Ай бұрын

@@ashtonb.2001and there’s a reason they’re not approved for LE.

i wuv having the wadian wamjet on my dooty pistol

Ok, WTH is the sub titles to your intro? 😳 I’m totally not getting the first part. Lol

Nice eye Brother

Interesting tattoo. Evil.

@unclefreedom213

Ай бұрын

tell me you aren't a Mason and know nothing about the organization without telling me

Awesome video. A realistic look at the cost of ownership. This is why I resist the urge to get the latest & greatest all the time…it costs a lot both in dollars and time. Keep up the good work!

Tax write off. Quit complaining.

@unclefreedom213

28 күн бұрын

for what? unless you're a self employed le guy none of this is a tax write off

@burrejo

27 күн бұрын

@unclefreedom213 I raise cattle on my ranch....everything is write off. Figured it would be the same if it was purchased for your profession. "Training rounds"

@unclefreedom213

27 күн бұрын

@burrejo man I wish since I'm a w2 employee I cannot claim any expenses ie. No travel ,nights away from home, meals, mileage, ammo, guns nothing

@burrejo

27 күн бұрын

@@unclefreedom213 you monetized on here? I don't see why you couldn't make an LLC for something. I'm sure there's a way to claim it as either training or content expenses...

@unclefreedom213

27 күн бұрын

@@burrejo I'm looking to that this year since the ad revenue coming in isn;t 100 bucks here and there and will have to before I kick off the Patreon

Cant go wrong with alien gear

Is this the same g45 with Acro P2 on PA today? I got that discount profile and looking to get this but want to ensure it’s direct mounted. Thanks!