Watching those zeros line up at 10:20 made my eyes water

@KrisTemmermanNP

4 жыл бұрын

Haha, just a lot of luck. Thanks!

@frankchang436

4 жыл бұрын

i agree with you

@priitmolder6475

4 жыл бұрын

He should have left the dykem on the plates for the other half a thousands...

I clicked expecting one of those hacky CNC mill builds. This guy just made a heavy-duty, industrial manufacturing tool :D This is PROPER!

"This is probably a bad idea.... But I am going to do it anyway" This is how legends are made

@buddhimanivantha6719

3 жыл бұрын

True 👌

@taxicamel

2 жыл бұрын

Well ...yes, you can certainly call this a CNC mill ....BUT ....it has been proven ....long ago ....that a steel frame machine is NOT the best way to make any kind of of mill or lathe. Most engineers know this ...but it is the inexperienced engineers who will still make a machine from steel. Steel has a far better "E" value, but it vibrates and "rings". Cast iron does NOT vibrate. It has dampening qualities which is why machine tool manufacturers use cast iron ...MEEHANITE, being recognized as the best composition for machinery applications. Companies have already made both lathes and mills from fabricated steel and have found out they don't perform well at all. No machine tool company makes a steel frame machine for marketing. If you are going to machine only non-ferrous or phenolic materials, yes, this frame will probably be fine.

@abersmith11

2 жыл бұрын

@@taxicamel ok taxi camel we get it stop repeating the same drivel. Id love to see you DIY CNC it must be a thing of beauty.

@argonthesad

2 жыл бұрын

@@abersmith11 He doesn't have to be able to build one to point out what he thinks is a flaw in the design.

@abersmith11

2 жыл бұрын

@@argonthesad sad

I can't even imagine how much planning must have gone into this. A masterpiece.

@tuberroot1112

3 жыл бұрын

Hey 5 minutes, with a bit of editing ;)

WTF, the entire build in 1 video?..... U r god.

@KrisTemmermanNP

4 жыл бұрын

Thanks Man! :)

@LICG_

4 жыл бұрын

yeah.. fucking savage

@athrunzala5337

4 жыл бұрын

well a lot of shortcuts, no details, merely a public display, wouldn't call that a DIY video

@BoxedGod

4 жыл бұрын

@@athrunzala5337 He didnt.

@lukandros

4 жыл бұрын

Athrun Zala he didn’t.

By far the best DIY CNC build I've ever seen. Amazing job.

@KrisTemmermanNP

4 жыл бұрын

Thanks man!

@johnmorack7619

4 жыл бұрын

I agree! This is the mill we have all wanted to build.

@frosty129

4 жыл бұрын

You must not have seen Marco Reps’s one.

@OuijaSTi

4 жыл бұрын

Check out Dan Gelbart's air-bearing CNC lathe with granite ways.

@cylosgarage

4 жыл бұрын

OuijaSTi that doesn’t count he’s on another level 😂

Seriously.. this guy built a CNC in front of my eyes. 10/10 for video editing skills as well. Excellente

KZreadrs: -"Look what I made on my CNC mill." Kris: -"Look. I made a CNC mill."

@signblade473

3 жыл бұрын

@Ilyas Nassyrov LeL

@hamidgghader

3 жыл бұрын

I invented CNC!

This is unbelievable. I run cnc machines for a living, and this blew my mind. This dude is an absolute genius. New sub 😁

Some call this engineering. Some call this manufacturing. I call this art.

@KrisTemmermanNP

4 жыл бұрын

Thanks :)

@mangeh9520

4 жыл бұрын

I call this impressive AF :)

@dadillen5902

4 жыл бұрын

GOOD engineering is an ART! GOOD engineers are born not make.

@rikkitikkitavi78

4 жыл бұрын

The art of engineering it is.

@inverse2k1

4 жыл бұрын

@@dadillen5902 studying engineering is when an engineer sharpens himself.

The most amazing build I have ever seen. It must be real pleasure to see your work come together like this and then every time you use it as well.

Omygosh 💖 The collet lock mechanism, smooth travel speed and capable rpm (demonstrated by how it performed going through the aluminum) + pretty tight tolerances are all super nice on this machine

This goes to show that people are more capable than they they sometimes think. There is a lot to be said for believing in the efficacy of your own efforts and just giving something an honest shot. People are too afraid to fail sometimes, but that's how you learn, and that's how great things get made. Sometime you just have to give a crazy idea a full go.

@RadDadisRad

4 жыл бұрын

Nick Joslin I’m not so sure he thought he was incapable of building the equipment I think he was more saying it was a bad idea because now he’s just going to do more CNC milling stuff.

@madTube1

2 жыл бұрын

Some small mistake somewhere will make this CNC useless. That's why he is saying it's a bad idea. After all the money and time its not worth it. Its. It's better to buy a fully tested product if you don't want to waist/risk the $$$$$ you put in. Why don't people build their own car? All the parts are available....

@lyteyearz5810

2 жыл бұрын

@@madTube1 They don't build a car for many reasons. For those that want to, most of the reasons lead back to being realistic about your capabilities or doubting your capabilities. Both equate to I can't. On that mental battlefield is where ideas go to fight and unfortunately die.

@waitfor2050

Жыл бұрын

Yeah, it's DEFINITELY a good idea to give "an honest shot" by spending thousands of dollars on an idea that might fail..

Perfect materials, perfect tools, perfect skills, OMG this is so unfair ... great job man, thanks for showing us a piece of metal working heaven.

My man I am deeply impressed with your precision with hand tools and a mag drill... my god dude you are a talented machinist I’m saving this video to watch over and over lol it’s like so satisfying to watch

@genjitsu7448

Жыл бұрын

This - exactly. He showed that you don't need a fully equipped modern shop to do something great!

The amount of work and skill needed to do this is unbeliveable

Hi Kris, it's wonderful to see a new video from you! The perfect marriage of art and engineering.

@KrisTemmermanNP

4 жыл бұрын

Thanks Kent! Watched a lot of your videos while doing research for this!

@kentvandervelden

4 жыл бұрын

@@KrisTemmermanNP Wow, I'm humbled. I take a lot of inspiration from you. You have a great gig! If only we could make the days longer. Thank you

There should be a person like you in every neighbourhood! Thumbs up

Fantastic build! I'm impressed with the precision using a mag drill! The granite plate helps, but hitting the marks still takes skill and patience. Well done!

Serious respect for building such a cool project. I admire your knowledge and skill!

Best effort-value ratio I have seen in a long time. Good job!

@KrisTemmermanNP

4 жыл бұрын

Thanks man!

I keep coming back to this video as I prepare to build my CNC router/mill. This build is elegantly simple, but it requires the highest levels of craftsmanship to build it with the methods used and tolerances achieved. The video editing is well done, too.

@sportstreasurestv6460

Жыл бұрын

Can help me to know list of electrical components you use,I am real appreciate but Ido not know where I can start

Omg! My mind is blown! You are true talent! Congratulations! 👏👏👏👏

Amazing concatenation of skills and cleverness. Rarely I learned so much in a video, and probably never on a 10’ one. Thank you !

I'm out of words... This is so satisfying in so many levels, it's like my wildest dreams come true

This is 21st century artisanry in its purest form. Absolute joy to watch

I come here again and again just to enjoy the sheer craftsmanship.

This is absolutely amazing, you are not only an engineer but also a genius! the accuracy looks great when you measure the workpiece with a micrometer.

That was extremely satisfying to watch. Thank you.

Builds own well thought out CNC Shirt's on inside out.. 5:53 Me: Yup, he's an engineer

@mlee6050

4 жыл бұрын

@Dylan Longaker not want outside to get dirty 😉

@PeterKocic

4 жыл бұрын

@@mlee6050 Two sides to work with, doubles time of use

@coffeeinthemorning5226

4 жыл бұрын

True

@ozgundemirr

4 жыл бұрын

lol

@SystemsPlanet

4 жыл бұрын

He saved one thought by not having to decide if it was inside out. Very efficient.

This is one of the most insane builds Ive ever seen. 10/10

I was not expecting a mill of that magnitude. Brilliant. He needs to put his name on it, so cool!

This was magnificent and inspiring. Amazing job in the planning and execution.

I am an automechanic and a lot of times i have to make "special"tools but seen this video im speechless.you are a damn genius.

@Kaser

4 жыл бұрын

I can't access the speechless.you website ! Please refresh link ! Joking of course :)

Absolutely amazing! It was certainly a pleasure to watch your video! Well done!

Your video makes building CNC machine look like sunday afternoon project. Really impresive build, great result!

Might be the most impressive thing I’ve ever seen.

@akashmew

3 жыл бұрын

Yeah same here!

@ivangamer8022

3 жыл бұрын

i use to mount cnc machines as a technicien and i had around 10 engineers. this guy is in another level

Fantastic effort. I've never managed to stop welded structures from warping, I'm surprised you didn't find that an issue. I'd recommend filling the frame base sides in with panels, greatly increasing the frame stiffness. The hollow sections can also be filled with concrete, the mass will stabilise the machine a lot, and kill frame vibration with a lot of damping.

@DodgyBrothersEngineering

2 жыл бұрын

You will never stop welds from pulling, the art is learning to weld in a way that the pull works for you rather than against you.

The best DIY cnc build I've ever seen. Clean & quality workmanship! Thank you for sharing knowledge!!

@KrisTemmermanNP

4 жыл бұрын

Thanks 👍

You sir have worked around and fixed these machines haven't you!? I work with them constantly and I would love to make one so maybe one day I can. Thank you! You are a man of talents and you've worked hard to achieve it. Good job!!

Nice work! I would of liked to see how you managed the axes alignments. Specifically bring the spindle axis inline with Z, and subsequently those back perpendicular to XY0.

Kris: Hi guys, I will try to make a vertical milling cnc... maybe... *A HUGE HIGH LEVEL VERTICAL MILLING CNC WAS MADE IN ONE SIMPLE AND PLEASANT VIDEO*

@LordOfChaos.x

4 жыл бұрын

aka 3 Achs milling

@KrisTemmermanNP

4 жыл бұрын

Thanks man :)

Word cant convey how precise and artist you are. You are perfect machine creator❤❤❤❤

This guy really doesn't get stuck in the weeds overthinking minute details or aesthetics, just gets it done and does it right the first time. I commend that. This is an amazing project to be sure.

You are best 👍 realy Nice work 😊

Did you do any test cuts on steel? I'd love to see more how does this setup perform on steel milling. Awesome work!

I bow my head to knowledge and dedication. maaaan you nailed it.

I have no words! the best i´ve seen in cnc!!!

WoW: Well done my friend. Best of luck!

Would love to know how it penciled out cost-wise. Great job!

@GrayRaceCat

4 жыл бұрын

@TheBinfordMan & Scenic Harbor I'll second that. Good used mills are getting to be like hens teeth, and pricey too!

@stonecraft745

4 жыл бұрын

Should be around 7000-8000€

@guillermogutierrez-santana4446

4 жыл бұрын

This guy did it for under 10k idk what currency, I saw another guy do it for $4500 Canadian.

I'm thoroughly impressed!

Wow, what an ambitious project, and yet you make it seem almost effortless. Well done, sir!

Hi I noticed that you put all the controllers and the rest of the electrics on a wooden plate. As a mechatronics technician at my company I have built and wired a lot if electric cabinets and please change this to an aluminium plate because wood can burn if ever anything should overheat or short in there. Also I work with frequency converters aswell as servo motora which usually get very hot during use. An aluminium backplate would also act as a heatsink. It's just some advice I'm trying to give. And I am impressed how you just built a CNC machine because you wanted to. Respect

@RadDadisRad

4 жыл бұрын

Who cares if wood can burn? If everything is working right it should be no issue. If all of his din rail is bonded it should be no problem.

@RadDadisRad

4 жыл бұрын

And he used stand off rail to create an air gap between the back of the servo controllers and the wood panel. Even if you used aluminum as a backplate the heat would be absorbed into the aluminum and just heat up the interior of the cabinet quicker.

@markobako9116

4 жыл бұрын

@@RadDadisRad Look all I did was to give some professional advice. And the servo controller get very hot during use which is why they NEED a heatsink. This problem is solved in the industry by putting them directly on a aluminium back plate so it can transfer the heat away from the controller faster which reduces the risk of Mal function due to overheating. And if you put a fan in the cabinet (would be necessary in either case) you fix the problem of cooling the cabinet

@zimzf

4 жыл бұрын

I also, As a mechatronics technician, also cringed with the wooden plate. Also worth pointing that some controllers, inverters, servo drivers use the heat sink as a grounding point. Also, I've never seen an aluminium backplate btw; Here All of them are made of Steel.

@radian2323

3 жыл бұрын

Seems like a reasonable suggestion.

You are the best!!!

@KrisTemmermanNP

4 жыл бұрын

Thanks Giaco! :)

@user-cs3dv2uo7w

3 жыл бұрын

鞥。

@talgtalga3767

3 жыл бұрын

@@KrisTemmermanNP are you selling this milling cnc machine?

@pritamsarkar2385

3 жыл бұрын

Yeah I understood everything

@NurgalinRuslan

3 жыл бұрын

@@KrisTemmermanNP I really enjoyed watching this video! Thank you for doing this kind of work! I will be glad if you look at my project, this is a CNC lathes kzread.info/dash/bejne/oZOClLt9f6TcZ9o.html

Electronics engineer without much mechanical experience. I learned so much from watching this. I've built two CNCs but if I use 10% of what I learned from you I'll build much better machines. Absolutely brilliant work

Great job designing and building this CNC Mill and thank you for filming it. Cheers Willy

This eding cnc controller is a new one for me. Everyone is talking about centroid controllers.

Marco Reps has left the chat

@KrisTemmermanNP

4 жыл бұрын

Ow :( Watched a lot of his videos while doing research for this. Thanks :)

@MrFaaaaaaaaaaaaaaaaa

4 жыл бұрын

Lmfao

@ziopoe

4 жыл бұрын

I scrolled down to write this, you were quicker than me.

@hyperhektor7733

4 жыл бұрын

@@ziopoe haha

@jeffthompson2464

4 жыл бұрын

Who is Marco Reps ???

Holy Cwap! I can’t imagine doing this myself. Very Impressive.

Watching you working has made my day

My guy just produced a $30k machine in his spare time.

Beautiful! But still, when i see all of your tools and machines it makes me wanna cry ;(

@KrisTemmermanNP

4 жыл бұрын

Thanks Miklas! :)

I have dreamed of having skills like yours. Fabrication and electrical required for a project like this. Your attention to detail. Super nice work!

Crazy man ...I never saw making milling machine diy this scale. Awesome. Big inspiration

Thats awsome man, you should sell those things

@fgee3719

4 жыл бұрын

Then it would'nt be cheaper than others, because it was really a lot of work.

8:39 I think this might give you some tiny misalignments by having a paint coating between the contact surfaces of the frame and the z axis.

@chaklee435

3 жыл бұрын

There's no way the steel frame is good enough anyway, so it doesn't matter for alignment. I think he's not fully showing a lot of the alignment he had to do between the axis.

@DodgyBrothersEngineering

2 жыл бұрын

@@chaklee435 what is wrong with steel? The wall thickness on that RHS, that isn't going to flex with that spindle and motors pressing on it.

Awesome, A good few years of honing your metalwork and engineering skills and getting all the tools together then one-day you bring it all together and make this look easy, hat off to you sir.

Incredible. I feel a bit frustrated that I cant repair a simple 3d printer after seeing this lol

Homemade but way more precision then Tormach mills for sure.

@KrisTemmermanNP

4 жыл бұрын

I hope so :) Thanks!

@buddhichampika5823

4 жыл бұрын

This is way better than tormach

@David-mo2wu

4 жыл бұрын

@P F he can chim it later tho. But i agree that wasnt perfect

@UshouldTryReality

4 жыл бұрын

@P F This was very limited information in a quick time-lapse that was only a tiny fraction of time spent on this project! I doubt any precision geometric scraping was done off camera but your comment about grinding isn't valid, you could scrape much closer than a ground surface and keeping with the primitive theme of the build I would use a granite square to bring it in, again closer than mating ground surfaces with error! He didn't show any servo tuning on camera which can also cause dimensional inaccuracies even with a rigid geometrically aligned machine with zero lash!

Have built two cnc machines, one plasma and one router. I see now my next will be a mill. Thanks for the video! Most excellent work.

Man, you are my hero from now on...pure art!

Amazing work and very inspirational. Really interested in how much this cost and the time spent building it.

@KrisTemmermanNP

4 жыл бұрын

5 months of work (in between other stuff). I hope to finnish it under 10K euros. Its not cheap. The flat plates where a big part of that. So I think you can make it much cheaper if you have access to a big mill/surface grinder.

If you could upload a bill of materials that would be great.

@poopthrower8313

4 жыл бұрын

Bob B i would like this aswell

@RadDadisRad

4 жыл бұрын

He could but then he’d have to charge you for it

@mikevdwerf

4 жыл бұрын

love to get this BOM, love to pay something for it

@radian2323

3 жыл бұрын

@Joker Toker it's that dang loch ness monster again!

Amazing job! I am impressed!

Wow, when I clicked on this I figured it was going to be some hack conversion of a Grizzly. Boy was I wrong!

10:33 Were you able to determine the source allowing the deflection in the column ?

@nxgnfreight

Жыл бұрын

Probably scew vs distance (steps/rotation) calibration

Kris know's what he is doing ,simply the best bravo !

WOW...what a great job you did.

Huge respect ! How many hours to design and build this machine ?

@KrisTemmermanNP

4 жыл бұрын

Not sure, but a lot (worked on it +- 5 months on and off) But I know I spend more than 95% of that time drilling and tapping holes ;)

@LittleRainGames

4 жыл бұрын

@@KrisTemmermanNP how much did it cost?

@johnhili8664

4 жыл бұрын

@@LittleRainGames I can tell it it cost a lot of money all the material and electronics cost money and that not counting the work involved easier and cheaper to get a new one:-)))))))))

@partsdave8943

4 жыл бұрын

@@johnhili8664 Yes, but this thing is HEAVY DUTY! Unless he got the materials at wholesale, most likely he didn't save much. Anyone can purchase one, BUT he has the satisfaction of saying, "I built this!" To an engineer and/or builder, that sense of accomplishment (pride) really doesn't have a price.

@johnhili8664

4 жыл бұрын

@@partsdave8943 No problem Dave if you are happy I am happy:-)) I still say its a waste of time and money:-)

I wish the video was at least 30 mins long, 10 mins is definitely disrespect for this machine

@KrisTemmermanNP

4 жыл бұрын

I'll try to make longer videos next time :) Thanks!

@redbugg99

4 жыл бұрын

@@KrisTemmermanNP buil me one but 1/3 smaller fir a tabletop

@garywheeler7039

4 жыл бұрын

Put the settings to .25 speed and it will be 44 minutes long!

@pratap3369

4 жыл бұрын

@@garywheeler7039afterall somebody knew math

@Simon-wr6hb

4 жыл бұрын

It would be nice make it like a series with more information etc.

OMG. wonderful. I have worked in cnc machine manufacturing unit it took us months to manufctature. One man show, really hats up.

What a masterful build hats off

these 4 zeros on the meter break youtube's porn guidelines

When you were drilling the mounting holes in the first ground axis plate, and had it clamped to the huge chunk of square tube, what did you do to prevent the ground plate from conforming to the surface of the square tube? It didn't look like the square tube had been ground flat and, then, you did a bunch of welding on it. Wouldn't that cause distortions in the tube, in addition. Thanks.... incredible build. Would be curious how you came out, budget-wise. I'm about to build a non-CNC mill, but with parts and pieces, instead of from scratch. It won't be nearly as ambitious, nor as elegant, I'm sure. lol GeoD

100% Skill level, not only in mech, but also in the electronics. Good job

Приятно было смотреть на этот процесс материализации мысли. Кое-кого создатель действительно сотворил по образу своему и подобию ) Успехов, Крис!

Boy do I feel dumb, I have a hard time putting the Christmas tree up..

@rodrigoferrari856

4 жыл бұрын

hahahah best comment

@BradKwfc

3 жыл бұрын

Yeah. Obviously this guy knows machining already and has been doing it for years. The average person without the knowledge or experience would not be able to do this!

I could see myself attempting this... however you had some very specific castings I wouldn't even know where to get or what to call them. Were they necessary, or could they have been blocked and fabbed up with traditional raw steel?

@joansparky4439

4 жыл бұрын

Those castings are being mounted between the spindle and the ATC cylinder, so that the spindle servo drive tooth belt can still drive the spindle. Should be avail from the same mob you can get the spindle, ATC cylinder or spindle servo from. Or you can omit this completely and get a high rpm (12k+ spindle with ATC inclusive) if you don't need to cut (a lot) of steel with big diameter tooling. Using a servo and a separate spindle is for CNC-ing steel, as one needs torque.

@KrisTemmermanNP

4 жыл бұрын

I bought them together with the spindle. Its posible to make it your self if you have something to bore out the hole. A big lathe or something. :)

I've considered this many times over the last 25+ years and I'm still considering it today. I'm amazed you mounted the ground plates directly onto the face of the box section and not onto machined flat pads. I'm overthinking it :)

An incredible job. Intelligence and passion

"I use my tools to make more tools"

Can you send me the links for buying the servos, controllers and all of the electronics ?

@KrisTemmermanNP

4 жыл бұрын

Added a FAQ in the description :)

wow, how beautiful it came out !!

*Dude you are an engineering beast!!! WOW!*

When I saw the title I was like "no way its gonna be accurate or rigid".......boy was I wrong that's a freaking tank

@fgee3719

4 жыл бұрын

Me too

That was beautiful! Like watching machine shop porn!

I wish I could be this skilled. WOW...incredible.

Wow! Very impressive. Great work.

GOOD NIGHT... ANY PRICE ??? $$$$ ???

@PithyBikes

4 жыл бұрын

Around 10k in desc. Roughly the cost of a Tormach 440 (the Tormach having no servos and no linear rails) hence the Tormach reference in beginning of video. So Kris' build is amazing for the cost.

"I only have a ruler" :(

@m3chanist

4 жыл бұрын

is it straight, that's where you start. Good luck ;)

@andrewstambaugh8030

3 жыл бұрын

@@m3chanist Check out the book "How round is your circle". Good read and you will know how to check/make the 1st straight ruler by which all other things may be ruled.