Really well thought out and built table Andrew! As a welder/ fabricator for the last 46 years I know exactly what you mean about workjng off of the floor, my knees are both shot! I especially like that you didn't permanently mount your bench grinder and vice to the table, I've always said that that's the best way to ruin a perfectly good welding table!

@TKCL

15 сағат бұрын

Thank you for watching and the feedback

Standard welding table top should have 2" grid pattern holes. The table should also have fixtures to hold welder and tanks.

I don’t know, it looks pretty flimsy…..😂. All kidding aside I think it turned out great! I’ll be stealing some of these ideas if I ever get around to building my own.

I think you did a great job. It suits you and that's all that matters. I might do something slightly different , but that's up to me. Cheers mate.

Отличный слесарный стол получился. Респект Мастеру.

BUEN TRABAJO MUY BONITA LA MES GRACIAS SALUDOS DESDE EL SALVADOR

Отличная работа! Стул желательно сделать поворотным, чтобы прятался под стол, а на столе сделать перфорацию под струбцины. Но это я думаю будет всё впереди. 👍

Built the exact same table a few years back. It transformed my shop into an amazing place to work

Well thought out!

Well done

On the 4in extension, I'd cut a slot hole. Bolt them together just slightly loose. Should give enough L-R slop to enable you to pull it out as one piece again

You got the whole work shop nicely set out on that one table I like the extension my table is 4x8 with 1/4 in top I saved it from the scrap yard the guy was taking to be melt down I offered to buy it off him before he load it on his trail he told me if you can load it on your truck take well I call my brother to bring a trailer away we went

@TKCL

3 ай бұрын

Nice score!

Hi, Andrew! A Masterpiece. See you at 5:00.

@TKCL

4 ай бұрын

See you then

What a great table

muy buen trabajo

Awesome table. You did a great job.

Hi, you will need an electrical box mounted on the welding table. That box will power all of your tools required on the table during a project. Get a good solid electrical board and connect all the equipment we saw there. Thank you.

That table will last three life times. I love the changeability you have for different accessories. It'll definitely be a Time saver rather than having to bolt everything down every time.

@TKCL

4 ай бұрын

Thank you and I agree.

Brilliant ideas watching your video gave me a solution for my table. Nicely done.

@TKCL

15 күн бұрын

Glad it helped

Metal working table and lunch table all in one. Awesome

13:20 VERY good idea. So simple and I never thought of it before.

@TKCL

2 ай бұрын

Thank you for watching

really appreciatable, awesome feature aa according to the needs of welders.

I would have liked to see you use a 1" plate for the top. I know theyre expensive, but a 1/2" will warp on you once you start adding some heat to it. That said, its a great looking table. I like the extension piece. If I can make a couple small suggestions. Weld a bar across the set bolts, that way you font have to search for a wrench to tighten them. And on the seat mount, move the bolt to the side. Its not going to be pleasant to whack your shin on it when the seat isnt there. I dont know if you did it, but add a couple bolts to the extension side so you can set that without it moving on you.

Impressive Design, I can see that you have long planned for this. One design suggestion: stool holder welded on the inside of the upright (so 90 deg rotated in) with the bolt not sticking out. If you ever remove the stool you have a bolt sticking out to bump into, even if you remove the bolt you have the receiver w/ nut sticking out. Additional benefit of the receiver on the inside of the upright - you could put the stool under the table for storage.

@TKCL

4 ай бұрын

Agreed

I built one a few years back like that. Very nice to have. Two things i did different was I used 2' pipe on the seat so it swivels from side to side and then under the table for those jobs its in the way and then second I wired the whole table with plugs on every corner. Then all you have to do is plug a fixed cord that made into a junction box on the table and then everything has power. Love your work and the details are awesome.

@TKCL

2 ай бұрын

Thanks

Great build! I saved the video for reference as I build mine. Just a thought you may want to consider since you already have a mag drill! What if you took and in the area where your seat is you laid out holes for a fixture table say 5/8” holes on a 3”x3”center spanning a 3’x3’ section of the table of thus giving you a 3’x3’ fixture table right in front of your seat then like you said you would have the seat and a fixture table all in the same area for any small part’s all you would need to buy is a 5/8” annular bit and some 5/8” shoulder bolts. Then you could make your own stops and clamps with the should bolts!!! You would have the most versatile table I have ever seen then!

@TKCL

20 күн бұрын

Thank you

Lots of great ideas and techniques. Thanks for sharing.

@TKCL

3 ай бұрын

Thanks for watching!

Very well thought out and tons of great features!

@TKCL

4 ай бұрын

Thank you for watching

If the chair could move around the table in a sitting position during the work process, it would be a super device and you would not get tired and you would assemble any construction on it faster!

That is a great looking table. One thing I would change. Seat post would be round and welded to the side of the leg, could then just swivel to the side under table. Happy birthday, young man.

@TKCL

2 ай бұрын

Great idea

This is incredible and so very much You Andrew!

@TKCL

4 ай бұрын

Thank you

Thanks for the inspiration! I’ve been picking up ideas from here and there but this one takes the cake…now I know how I want to put my table together.

@TKCL

3 ай бұрын

Glad you enjoyed it

Happy Birthday! I hope Tiffany cooks you up something special. 🎉

@TKCL

4 ай бұрын

Thank you!!

At the point you were working with the round wood I was thinking wtf are you working with wood for? Then towards the end I saw why you were working the wood & said Ohhhh...that's clever!

Great looking table! Two things i would add are two 4 gang outlets one on each end, run the wire in flexible metal conduit. I wired mine with a male end of a plug. That way i run one extension cord plug it in and have power without all of the cords to trip on on the floor. The second thing would of been go thicker on your table top, you have a mag drill. So all you would've had to do was drill 5/8" holes, and bam, you have a fixture table. Get some clamps weld some 5/8" bolts or shoulder bolts and you have cheap clamps. It works like a charm.

@TKCL

3 ай бұрын

Have you priced 5/8 sheet? It's absolutely outrageous, I had to stay within a budget. Thanks for watching.

Drill 3/4 holes in the top so you can use the Fireball Tool Fixtures.

Wow! Great job!

@TKCL

2 ай бұрын

Thank you!

Awesome!! Thanks for sharing.. saved to my library for future

@TKCL

2 ай бұрын

Thank you for watching

That Vevor magnetic drill seems to work very well! Great table build btw absolutely love the design good job!

@TKCL

2 ай бұрын

Thank you very much!

Dang bro! U thought of everything. Been watching a lot of table builds for ideas. This one is the best. Gonna use a lot of these features. Thanks!

@TKCL

4 ай бұрын

Thank you for watching, glad it was helpful. More add ons coming!

Looks great!

@TKCL

4 ай бұрын

Thanks

You did a great job. Nice ideas. I really appreciate the round seat. Sometimes we need time to think or just rest.

@TKCL

Ай бұрын

Thank you for watching!

Awesome….just awesome…..another great project! Thank you for sharing! Happy Birthday!!!🎉

@TKCL

4 ай бұрын

Thanks so much! 😊

Great looking table, I plan on building one, wish you talked more but very nice

@TKCL

Ай бұрын

Noted!

если есть возможность, то нужно сделать так чтобы работа приносила удовольствие и первостепенная вещь на этом пути, удобное рабочее место. добротно и качественно, вещь! фиксатор колеса отличный, не знал что такие есть, надо себе такие поискать

Wow! Nice work!!

@TKCL

4 ай бұрын

Thanks!

Happy birthday to you! I really enjoyed watching you build this table, very, very nice!

@TKCL

4 ай бұрын

Thank you very much!

A lot of thought went into this build. Looks like many years of enjoyable use!

@TKCL

4 ай бұрын

I sure hope so

If you ask me, that seat is the best feature for a 40 yo :))) That's not just a table, it's a station, bravo!!!

For your extendable piece at the end of the table, could you drill an oblong bolt hole and use a nylon lock nut and bolt, not tighten it all the way so it allows the metal to move where it needs to and allows you to pull both out at the same time.

Great idea

@TKCL

4 ай бұрын

Thank you! 😊

Fantastic video. Great ideas. Thanks for sharing

@TKCL

4 ай бұрын

Thanks for watching!

Receiver hitch in middle of extension. Square tube guided by Angle on each end. No more hinding

Great Build :) Thanks!

@TKCL

2 ай бұрын

Glad you like it!

Love the thought process! Looks great! 💪

@TKCL

4 ай бұрын

Thank you

That's a awesome table!!! You did a great job!!!!

@TKCL

4 ай бұрын

Thank you very much

OK - I have been watching you for awhile - and have always been impressed by your mechanical skills and the way you think through projects - but this is a WHOLE other level! Great job!

@TKCL

4 ай бұрын

Thank you for watching and the support

Nice table! The only thing I would add is angle iron on the edge of one side of the table to hold round stock when welding!

Very impressive indeed !!!!

@TKCL

4 ай бұрын

Thank you for watching

Andrew Happy Birthday! Awesome welding table you’ll get lots of use out of it. Add more seats and you will have a picnic table.

@TKCL

4 ай бұрын

Thank you sir

What a great build! Cant wait to get started on mine.

@TKCL

2 ай бұрын

Thank you for watching

That is some table mate, fantastic work. I was looking forward to you trying to pick it up when it was upside down! Mines almost identical, the only thing different was I made the seat swing out so I could kick it underneath in a hurry!

@TKCL

2 ай бұрын

Thank you for watching

Good job. Some great features there. 👍

@TKCL

17 күн бұрын

Thanks

Dude that is a seriously awesome table you built. I love the awesome slider bar idea for the grinding consumables. Excellent job man and God bless y'all

@TKCL

2 ай бұрын

Thanks a bunch! God bless

Nice work. Looks well thought out.

@TKCL

4 ай бұрын

Thanks!

I loved the solutions you find.

@TKCL

3 ай бұрын

Thank you for watching

Extreee good , great table already drawing mine up , copy cat here 😎

@TKCL

Ай бұрын

Glad you enjoyed it

Wow, what the exelent

Love this table set up. Wanna build me one ha

Good day to all.

@TKCL

4 ай бұрын

Good afternoon

I just recycled on old frame that was in an oil field yard, think it was used for some sort of storage, it’s a 3’x5’ frame built out of 2 3/8s drill stem, I’m planning on putting a 3/8” plate on top, I’m trying to come up with a way of putting my chest type tool box that’s about 2’ tall at the bottom but make some sort of slide out to be able to keep it out of the way, was thinking of bolting some angle iron on it and welding some c-channel to the frame to be able to let it slide in and out

Great job Andrew. You really thought this one out. Not only is it a killer design, you cleared up some space in your shop with the extra storage space. You will now know exactly where your welding supplies and tools are in that beast. Awesome content once again!!!!!

@TKCL

4 ай бұрын

That's exactly right, and I also have a big Shop clean out and storage solution planned. That'll be a future video to get a lot more of my working room back and get more organized.

Great Design. All the Best using it.

@TKCL

4 ай бұрын

Thank you

You’re going to have to eventually get a Fireball Hardtail Vice to go on that awesome welding table. That is fantastic table you have built. Love the extension fence.

@TKCL

4 ай бұрын

That would be cool! I need some of their squares as well.

great work

@TKCL

3 ай бұрын

Thanks!

Sensacional Una de las mejores que vi , y tengo 50 años de oficio

@TKCL

2 ай бұрын

Thank you

Very nice.

@TKCL

3 ай бұрын

Thank you

That’s an awesome table!!! I love it!!! I need to build one myself!!

@TKCL

3 ай бұрын

Thanks, I love it!

Great table, one idea that might work for you is to add a slide table from underneath so you can pull out your big evolution saw.

@TKCL

Ай бұрын

It's on my to do list.

What a pleasure to watch your expertiese, like it. outstanding work.

@TKCL

3 ай бұрын

Thank you for watching

Nice bench, I built one very similar but I wish I has used expanded metal on the bottom shelf like you did. I saw a cool hack on KZread for the bench grinder, guy mounted it on a hinge, so when not in use it swings down under the edge of the bench. I also put a power bar on mine under the edge.

Very nice job. I did a few things a bit differently, but your table has some very cool features. I started with seats like you made, but found them to be knee busters, so I converted them to swing away style on pintles. I really like your table extension. Well done, sir!

@TKCL

2 ай бұрын

Right on

The table looks great. I recently did something similar to hole grinder discs on threaded rod but found another nice touch is to use 1/2” metal conduit and pinch that with a 1/4” washer and nut and it makes sliding on the discs and other things nice and smooth

@TKCL

2 ай бұрын

Thanks for the tips!

All I can say is WOW.. we’ll done.

@TKCL

Ай бұрын

Thank you

Awesome table!

@TKCL

4 ай бұрын

Thanks

Nicely done!

@TKCL

3 ай бұрын

Thanks!

Nice! When I made mine I welded scrap 1.5 inch tubing to legs to hold my welding torch, plasma torch etc. also at the end I welded in a grate for plasma cutting. It has a tray underneath to catch debris.

@TKCL

4 ай бұрын

Going to build a few more of these things, I especially want a spark shield on the slide out when cutting.

Nice table and well thought out.

@TKCL

4 ай бұрын

Thank you

Impressive well thought out design!! Again, ...great job!! 🙂

@TKCL

4 ай бұрын

Thank you very much!

NICE JOB 👍👍

@TKCL

4 ай бұрын

Thank you

Fantastic tabke, Nice job!

@TKCL

3 ай бұрын

Thank you

Dude, excellent work, really cool design, great craftsmanship too. Looking forward to seeing how this progresses and the projects you build off of it. Appreciate ya sharing 👍

@TKCL

3 ай бұрын

Thank you, new project video drops today.

🎂HAPPY BIRTHDAY🎂....that's one helluva birthday present you built yourself! I love the addons and the versatility, not to mention freeing up valuable work or storage space in the shop. Excellent job as always "young man"!👍👍👍👍

@TKCL

4 ай бұрын

Thank you so much 🤗

May have to copy this! Thanks for the video

@TKCL

2 ай бұрын

Go for it!

Good work

@TKCL

3 ай бұрын

Thanks

Awesome welding table. That will really come in handy for you 😊

@TKCL

3 ай бұрын

Definitely!

Happy Birthday 🎂 may you many more years to celebrate 🎉. Great job on the table. Was very different not hearing you talk for the first 25 minutes. 😂😂

@TKCL

4 ай бұрын

Lol yeah I figured I'd shut up for once 🤣

Nice 👍

Sure is an awesome table Andrew. I thought about adding a sheet metal top to my workbench but it is expensive like you said

Excellent design

@TKCL

3 ай бұрын

Glad you like it