When checking ring gap use the piston to center up the ring in the cylinder. Great video

@2nasty

3 жыл бұрын

Hydro dipped‼️ my CR250 check it out kzread.info/dash/bejne/eoSZk6yKZKucqaw.html

@deeotto23

3 жыл бұрын

Thanks for advice

@ChuckHaney

2 жыл бұрын

Was about to post the same thing. Oil the cylinder and piston so as not to scratch anything and let the piston perfectly set the ring depth.

@2StrokeFamily55

8 ай бұрын

Allahumma shalli 'alaa sayyidinaa muhammad wa'alaa aali sayyidinaa muhammad wasallim tasliima😁😊 Yok Tobat Kawan Dan Jangan Lupa Sholat Dan Sholawat😊😁😊😊😊😊😊

Praying for you man! Nobody deserves to kick cancers ass as much as you do!!

I love how everybody is like : When is the crf250r being rebuilt? How much longer till the CR is done? Everyone needs to chill. Your primary goal right now is getting better! Don’t let ANYTHING get in the way of that! #camstrong

@rickfeith6372

5 жыл бұрын

No F...this is a real CR

@themittenoutdoorsman6969

5 жыл бұрын

@@rickfeith6372 he is talking about the Crf250r he said he was going to rebuild for his friend in a previous video before he was diagnosed

@milan5159

5 жыл бұрын

Nice kawi

When checking the ring gap i like to use the piston to push the rings straight. Awesome video as allways!

Hope your treatment gos well ❤️❤️❤️❤️❤️❤️

I’ve never been the type to really watch or get into someone’s KZread channel, I will admit I always find myself watching your videos more than anyone’s Cam! I’ve had to rebuild a few motors myself and when I’m stuck I always look at your channel bc I know you have had to deal with it most of the time! Thanks for making the best tutorials! I hope and pray your treatments go well, for as much as I watch your videos I had no idea you were going through any of this! You can do it buddy! #CamStrong

@ZygmuntKiliszewski

Жыл бұрын

Good job, congratulations 👌.

@2StrokeFamily55

8 ай бұрын

Allahumma shalli 'alaa sayyidinaa muhammad wa'alaa aali sayyidinaa muhammad wasallim tasliima😁😊 Yok Tobat Kawan Dan Jangan Lupa Sholat Dan Sholawat😊😁😊

Can’t wait to see this build complete!!!

That looks sick! And I'm glad you are doing well. We are are here for you!

I just did my KX 250 F. The expansion ring , and rails are very delicate and hard to keep clocking oriented right. My shop manual suggests circlip ends not to be in piston cutout. You can use piston to square rings for end gap. I’m now gathering up all my parts to totally restore my 2001YZ 426. Glad to see you back working , fantastic results as usual!

The head in the thumb nail looks good on this motor

When you popped that second ring into the bore, you could see all the lube getting squeezed out, sooo satisfying lol. Keep sending it bro! 11:49

OHHHHHHH BOOOOOY!!!!!! I've been WAITING for this. Watched the whole 30 part series, with the motor and final assembly being the most anticipated...wanna see that thing GO!!!

That's so awesome. The way the engine turned out, and all the companies helping out.

man i hope the rest of your treatment goes well. i am happy you can put out videos even with the stuff inside of you. prayers to you brother!!!

Can’t wait to hear the sound of that beast 🔥 great job man, stay strong! Get weel soon , greetings from italy!

That was FANtastic. Thanks for taking about the head. I NEEDED that.

You are a natural kid, great job... You are in your element, keep up the excellent job.

Love you man, keep fighting. Love from Australia!

Hope you get well soon Cam. Love watching your videos. All the best from the UK

Keep your head up and shoulders square my dude! Love from Zimbabwe🇿🇼

Love you Cameron. Thank you for always being a positive role model. Stay strong bro.

Hey cam I know this video is a couple years old at this point but thank you for making it. I put my 2007 CR250 back together with a new top end today and your video helped me out a lot

Awesome built!! Wish you the best!

Beyond stoked to see this build completed. Keep going strong man!

good to see ya in the shop and gettin it done! have tough we with ya

Watching from the UK. Love your channel bud..can't wait to see your 250 finished.. And its sitting next to that sweet 125 of yours!! ..hope your feeling better soon stay strong!!

Good on you mate, brilliant video, hope the treatment goes great

Awesome work, awesome channel. Get well soon dude.

Get well soon. Ill pray for your speedy recovery! More power!

Man... The tutorials, things you are showing to us are awesome! That makes me feel to take my bike apart and explore, what's in there as i haven't did that once myself, but my dad does so my bike wouln't blow up

this is just amazing we have all been waiting a long time to see this congrats man! An easy way to do ring end gap is to bring the piston up from beneath and push the ring until its level. And its good to use some assembly lube.

Wow this was the first vid I saw from you, great work. I hope for the best for you. I kind of know how it is since my mom got cancer 2 years ago but is now free from it. Fortunately I live in Sweden so treatment doesn't bankrupt you. You've earned yourself a new subscriber!

Great video man, this bike is going to be sweet! Sending love and best wishes for your treatment from Scotland. Keep up the good work. 💪🏻

I love the smart and calm way you assemble stuff, great video! Learnt something to😀

love watching your videos! You are awesome Cameron. Stay strong! Best wishes from Germany.

Awesome assembly, i really enjoy your videos man. Very well put together

@CameronNiemela

5 жыл бұрын

Thanks Shaun!

Hey Cam, I’m watching every video you’re putting on! I’m from Italy, and I’m supporting you! Can’t wait to see this bike done! We love ya’! #staystrong

Just watched all your videos on this engine build up to this point but it's late here in the UK so I'm headed to bed now. Brilliant presentation by the way and fascinating to watch. 👍👍👏

Good attitude about your struggle right now you’re doing grate keep it up and you’ll be back on the bike in no time🤘🏾

Excellent video, Thanks for addressing the lube holes drilled in piston on exhaust side theory(cast vs forged).

When you're doing ring end gap use the top of the piston to press the ring down into the cylinder just a quick way to make sure it's seated evenly.

Fantastic work!

Yes! Loving this cr250 build

Great video. Keep up the good work. Stay strong 🙏

GOOD LUCK!!!! So sorry to hear about this, wish the best for you!

Ayee man the build came out great I love it and I’m glad your doing well 💯

Keeps updated on your treatment, great videos!

Great video Cameron and wishing you a speedy recovery strong man!

Thats one good looking engine,keep up the good work and hope you have a speedy recovery

Sir, Cameron, I have a 1986 CR250R, Which pertains too the Bottom end of your assembly videos. I really like what you've done to the CR. Alike you I've had a battle with Cancer, 6 Cycles of Chemo and 7 treatments of Radiation. Countless hours of treatment, I went through 2 months being nauseous and lost 80Lbs. I received the CR as a gift for completing therapy. Basically what I'm saying here is I wish you well with your Battle with Cancer. Never give up biking, and cranking. Drip, Drip, Drip, Drip,. Have a great season CN a friend CZ................................................

Life is good to you!we are trying to enduro with xmm250.

Can't wait to see it running

So cool can’t wait to see it finally finished

I love watching videos like this. Informational without being too padded. Also, hope to see you ripping on that bike!

Great vids cam just rebuilt my first complete engine with your magnificent help keep them coming

Good luck Cameron. I just picked up an 03 CR250 this weekend, I love that bike

Nice to see your back gribding hard Cameron. Hope your feeling well 🤙🏻 🏍

Glad to see your doing good, hope you get through this

Engine looks killer man, wish you could get ahold of my CR500R.. Say strong 💪 and always keep it pryme 👌

Vertex is always a great choice!

Awesome motor build, and good luck on your recovery!

keep going bruhh, keep strong, from Indonesia 🇮🇩

@CameraPonselChannel

5 жыл бұрын

Sama kita

@putragaluh79

5 жыл бұрын

Nyimak

Been waiting so long to see this bike assembled, looking sweet!!! Cancer sucks cheesy C##k, looking forward for you kicking it's arse and putting a video up saying you've had a full recovery. Stay strong and keep up the good work

Really enjoying the detail in these videos.

Stay strong man, we love you!!!

Motor is looking good... Good Luck with your treatment Mate.. Hope you get well very soon..

Pure perfection. It looks awesome

Beautiful build man! That bike must be like therapy for you. Can't wait to see the finished product. All the best! #camstrong

Nice dude!! glad to see you back building again. I hope you keep getting better. My KZread go to guy when comes to fixing dirtbikes

I’m fairly new and I love your videos, I didn’t know u are battling cancer. Best of luck. Stay strong

Perfect as usual! Thank you Cameron!

Looking sweet brother!! We are all pulling for you Cameron! !!

Epic! Thank you for being so helpful

Fantastic attention to details, awesome video

Very nice job!!!! Good luck from Greece!!

Goooooood job "Bravo"!!! Stay in shape buddy, from Portugal

Can't wait to see that bike fully built out and running.

Awesome video mate. Looking good, hope you get better.

Thank you for all this beautiful video's you help me very much with my CR 250 rebuild, I am a big fan of you!!!! (From Greece)

Good to see your feeling good and back to making vids.....

Good work man, be strong!

Very nice engine build. Very excited on the upcomming videos

Keep up the good work man loving this build it looks awesome so far!!

Keep strong Cameron!!

Can’t wait to see her done love the vids I hope you get better soon kick the shit out of that cancer

Great job on the Cr250 engine build. Great attitude on the cancer fight ! Get well soon!

my morning is great to see you build this engine.

Cannot wait to see the bike assembly!!!

Good luck with your treatment man 👍

Hey Cameron ! Wish you the best with your recovery ! i gotta say i couldnt wait to see that engine put together ! but the oiling holes has nothing to do with cast or forged pistons... they are there to cool the exhaust bridge ! no holes, no Cooling, that bridge is gonna heat up and crack ! Your work is amazing and Keep it Up buddy ! Sam

Engine looks great and hope you get better soon

nice to see ya back in the shop doing the assembly!! Cant wait to see the bike get re-assembled. Its going to be PRIME!!!!!

Looks mint! Can’t wait to see more!

Great job as always and get well soon bro !!!

looks so good man. Keep going strong

Very very clean workshop... very nice to watch !!!

Sick looking engine, you always manage to do great results. 😍

Great to see you again Cameron. I can't wait to hear this bike ring ding ding. Make sure you name it too! It should start with a C. I named my WR426 Walter lol

Awesome video!! I save all your videos for reference. Your info is the best, & you make everything look so easy. Love that new head!! It's SICK!! I'll be getting in on that raffle!! Keep up the good work!! Stay strong!! STAY PRYME!!!

Hi Cameron, Glad to your up and moving about more. Still praying for you and the family too. I do have a suggestion for the studs in the cases or barrels. Per tax makes a copper based anti-seize compound. This is way better to prevent Galvanic corrosion for the steel studs and the aluminum cases. The silver your using help, but can also promote the corrosion your trying to prevent. The copper prevents this and lubricates the seating of the studs. hope this helps. Blessings brother.