Building my Acoustic Guitar Side Bender
Тәжірибелік нұсқаулар және стиль
Its time to build an acoustic guitar side bending machine. This was a fun project to put together. I made this one with different attachments for bending cutaway or non cutaway guitars. I think its going to be super versatile and I can't wait to put it to use.
-- Affiliate Links to Products Used --
#7 x 1 1/4" Tiny Head Wood Screws - amzn.to/43tuXBF
Milwaukee Cordless Rotary Tool - amzn.to/3KVczuf
Irwin Quick Grip Clamps 6" - amzn.to/3UB4deh
Shop Fox Press Clamp - amzn.to/3zXwp1G
-- Visit My Website--
www.homebuiltw...
-- Check Out My Handmade Guitars --
www.hayleyguit...
-- Save 10% and get some awesome CA Glue from Starbond --
bit.ly/2WJmxbL
-- Visit My Etsy Shop --
www.etsy.com/s...
-- Ways To Support HBW --
www.homebuiltw...
-- My TeeSpring Store --
teespring.com/...
-- Check out my Amazon Shop --
www.amazon.com...
-- Join the HBW Built not Bought Facebook Group --
groups/homebuiltworkshop/
-----Connect on Social Media-----
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
----- My Mailing Address -----
Home Built Workshop LLC
P.O. Box 84
Peyton, CO 80831
Please remember when using tools of any type, there is the potential for injury. You are responsible for your own safety. Make sure you know how to use your tools properly, work at your own risk, be safe, wear your safety gear, and most of all, have fun!
#acousticguitarbuilding #hayleyguitars #homebuiltworkshop
Пікірлер: 39
This is by far the nicest looking side bending jig I've ever seen. Outstanding work! Such a shame people who buy your guitars don't get to see it.
@homebuiltshop
4 ай бұрын
Thanks man! Sometimes I enjoy making the jigs more than making the guitars.
Great job on your side bender build.❤
Looks like it will work very well for your needs for your next acoustic guitar build. hope you start it soon. Looking forward to following along watch you build it.
@homebuiltshop
Жыл бұрын
Thanks, I plan on getting started on one before long.
Love the jig, nice job... the only thing that I change is, insted fixed bracket dowels, I allow them to roll and avoid them to cause any friction and the action of bending is more easy. 👏👏👏👏
@BryanTrotter-op2dx
3 ай бұрын
Nice job dude how about you show us some plans you really did a sweet job on that
WOW That's Awesome!!! Different from many others
Great stuff. Do you have PDF of this available?
Do sell the G-Code for this project? Great job, well done.
Very thorough. I wonder if it saves any money to diy versus purchase from Stew Mac ? Thanks.
Hey pal. I would love to see a little more in-depth on the blanket, and power source for it. I have been looking for blankets online and some don’t even have a plug of any kind on the pig tails. Trying to get a setup that doesn’t break the bank. Thanks!
Would love to see a tutorial on how you designed this for CNC.
@homebuiltshop
Жыл бұрын
While I don't have a specific tutorial at this time, I used several different plans for similar jigs that I found online as reference. I also have the digital plan for my acoustic guitars that I imported into Fusion 360. I used my plan for some of the sizes, combined with the other plans to create my own parts.
@richardhall9409
5 ай бұрын
Would you share your designs? I have been playing with cnc work after I got me a Genmitsu 4040 Pro late last year. Also l, wanted to start building guitars once again for my grand daughter and daughter. I have only built one and a half plus a uke so far, but need to make these jigs, especially a side bender, to make things easier. I do have Fusion 360 and Carveco for design work on the cnc.
How are you liking your Onefinity? Seem to very helpful in your shop. Just bought one myself, still in the boxes until I make room in the shop for it.
@scottmorris4914
Жыл бұрын
me too.
@homebuiltshop
Жыл бұрын
I really like it. You need to get yours set up. I haven't even scratched the surface of what I can do with it.
Great job on this project.
@homebuiltshop
Жыл бұрын
Thanks Paul! I can't wait to put it to work.
Nice build. Do you have a plan/cnc file for the parts?😊
Hello Friend, I have watched a few of your videos, especially guitar-building videos and you make it all look so easy and we know it's not. So my question is easily answered do you have plans for the side bender machine and if so are they for sale??
Now what about steaming your wood and then bending it into shape?
@homebuiltshop
Жыл бұрын
You could steam it and bend it to your form. That would be just one way to do it.
@HomeImProveMentHow
Жыл бұрын
@homebuiltshop Okay thanks, I work on custom staircases, And sometimes we bend the Handrail. Thanks for getting back to me, How long have you been making guitars?
Thank you very much for this. Please can I ask, what are the specs on your heat blanket and thickness of the spring steel? Also, could this easily be adapted for ukulele builds?
@homebuiltshop
7 ай бұрын
The steel sheets and blanket I ordered from Luthiers Mercantile. Unfortunately they are going out of business. I know there are several blankets like that on Amazon. Its just a 110v heating blanket. I think the spring steel is .007" or there abouts. It could totally be adapted for ukeleles.
Any way you could post the plans up
Now, i'm assuming you would use a router if you didn't have the c n c machine, so what would you do different if you were using a router? I look forward to hear from you by for now ken
@homebuiltshop
Жыл бұрын
I would draw it out on a piece of plywood, then cut it on the bandsaw. For the slotted piece, I'd use a router and a straight edge to cut the slot.
@HomeImProveMentHow
Жыл бұрын
@@homebuiltshop OK that makes sense. Thanks for getting back to me.
What size and where did you get the springs. Having trouble locating them. Thanks!
Good job
Great work! Wondering if you know the specs on the springs you used, or would use, if you made another one.
Cutaway guitar. Florentine or Venetian? ;-) Anyway, fun video. Thanks.
@homebuiltshop
Жыл бұрын
I like the Venetian cutaway myself. Who knows maybe I'll try a Florentine someday too.
what drill bit sizes did you use for the drill bit press clamp?
👍👍👍👍
How did you make the mold at 17.18 mins in?