That was the most accurate britannic model I’ve ever seen. Also the sinking was pretty close to accurate too! Amazing video, 10/10

@GreenStarLineRoblox

10 ай бұрын

100%agreed

@imdead7489

9 ай бұрын

actually it sank to the side like the movie shows, this one sank almost going flat, not really.

@leo12061

3 ай бұрын

@@imdead7489the movie is untrue.

The final plunge timing is quite like the real sinking, when the bow slammed in the sea floor, the stern sinks like that... So quite accurate 😉 The model is nice

@gordak

2 жыл бұрын

and that's when the model hit the bottom of the long island sound lol lol

Bro's recreation was much better than the actual official realtime 3D animated video 💀

very well done, love it.

Bruh that’s awesome when i put my model ships in the water they turn sideways and sink like that awesome job

@cutercills9x9productions9

2 жыл бұрын

Once tried to float my model, but 1. It was not sealed properly, causing it to leak (I didn't put an intentional iceberg gash. The hull had too many gaps). It also capsized and soon, I decided that using the model as a water toy was not very easy or smart.

@arvindpatel2574

2 жыл бұрын

How you sink it like him is you put something heavy inside the 🛳

@pianiphicechoes320

2 жыл бұрын

Coins to balance the model and fix the gaps with tape if possible

@CarolynEmory420

Жыл бұрын

Throw some quarters in it and it’ll flow

@CarolynEmory420

Жыл бұрын

@@pianiphicechoes320 hot glue💯

I have 2 Titanic model kits currently, one the maiden voyage version and other the shipwreck. I might buy 4 more. 2 would be used for HMMS Britannic and the other for the Britannic wreck. The 3rd would be a HMT Olympic and the 4th would be something I don't even know why I would create- a half scrapped Olympic (why did I even think about making that?)

did you ever get the ship back up because that britannic was so beautiful

@gordak

3 жыл бұрын

it's safe on my bookshelf now :)

@troydickens3647

2 жыл бұрын

@@gordak ok

@SpeakerDummy824

Жыл бұрын

Can we see the damage ?

I didn’t think something so good could be made from a crappy model lol 😂

That was amazing!

how did you make the red cross at the top

Nice job M8

Did the water affect your paintwork and weathering at all?

@gordak

3 жыл бұрын

no, it was all sealed with acrylic varnish. You will notice, I didn't have the rigging on when it sank. The water drops would have looked unrealistic on the rigging

@user-mj9dx9go6j

2 ай бұрын

The acrylic varnish Can it prevent the model's paint from coming off?

@Cactusfruitsquisher

15 күн бұрын

@@user-mj9dx9go6j yea just get any clear sealer spray (I use testors) and your paint will be fine. Make double sure it’s a waterproof sealer

the sinking of the hmhs britannic 2020

Cool

Ad,melo😊😊😊

I have a question at 0:56 Where did you get the desk and davits, Internet or You just print it?

@gordak

3 жыл бұрын

Look it up on shapeways, they sell a bunch of different scales

Can you please put the link of the davits and decks?

funny enough the model is safe and sound it will be seen again one day in the furture!

Hadaga😮

What paint did you use for the decks

@gordak

2 жыл бұрын

tamiya deck tank airbrushed with brown added to edges and white added to the high traffic areas

I have a question, how do u make the model sink like that because mine always flips over when it's on the water

@gordak

2 жыл бұрын

that's what they do, because they are top heavy, I used a wire rig

How do you balance the ship on the water?

Did you have a tianic one

i subscibed for u to carry on and get better and better evry day

What color is the hull?

How did you make it sink its really well done!

Where you for the cross?

Beautiful work 😮 Are you also selling those custom decals? And would you be able to make those shapeway decks in another scale?

@gordak

3 жыл бұрын

I'm working on it

@gordak

3 жыл бұрын

here are the decals for you to print on decal paper postimg.cc/TKjnqzr3

@marcoserio6462

3 жыл бұрын

@@gordak thank you very much

@pianiphicechoes320

2 жыл бұрын

@@gordak make 1/400 scale of it

Wow 😊 Titanic 🤔?

It was sink like lusitania

i saw the Britannic under water!😊 4:12

How you did to make it float like that with the extra heavy on top? It floats like real life and not under waterline 2:06

@gordak

9 ай бұрын

wire rig under the keel, which failed to work as intended. The biggest issue with model boats is how they bob in the waves, so i was able to eliminate some of that.

Hi there, I have an old 1/400 Revell 100th Anniversary Titanic that I want to convert into Britannic. Can you re-size the Davits & the rear stern raised platform parts into 1/400 scale? If so, how much would they cost plus shipping to the UK?

How did you make it sink. Did you push it down I’m the water or what

@Boypogikami132

2 жыл бұрын

I think he cut the hull then repaired it after she sank

Why not the ocean liner version of it?

@randomuser9883

Жыл бұрын

Cuz that "version" of her never existed she never served as a passenger liner

@Bluemantopvids

Жыл бұрын

@@randomuser9883 she was gonna originally

@randomuser9883

Жыл бұрын

@@Bluemantopvids yeah but she was never painted in that scheme

i saw a hand under water

😊😊😊😊❤❤❤❤リアル

I was finding in eBay britannic model 1/570 but i dont find it

1M IQ FOR THIS

Whatever is on the front of the ship it's making it go high

Britannic is sink like a Titanic

@viniciusantunes1415

Жыл бұрын

Yes, The Britannic and Titanic were started on the same project, these 2 ships and her sister Olympic were the only three ships in the Olympic Class, Olympic being the First of the three to be built and making her maiden voyage on 14 July 1911 and unlike her brothers she had a long commercial life and being scrapped in 1935, the Britannic never made a single commercial voyage and in 1916 shortly before her construction was completed she was requisitioned as a Hospital Ship by the British Admiralty and made 6 voyages before suffering an explosion in morning of November 16, 1916 and sink in just 55 minutes off the coast of Kea Island in shallow water.

Wait you make titanic to britannic

What happened to the model?

A model is cool on the outside but the interior would be better You should have put an interior in there

The ship paint doesn’t rot in the water right?

@gordak

2 жыл бұрын

not at all, acrylic model paints can handle water once they have dried

@keysharoa8837

2 жыл бұрын

@@gordak thank you, oh and, how much time did it take you to make the model?

@keysharoa8837

2 жыл бұрын

@@gordak and? Where can I buy it?

They made a little version of me?

@LOCOMOTIVE837

2 жыл бұрын

No your sister.

@pianiphicechoes320

2 жыл бұрын

Yes maam

I don't understand why you would go through all that trouble just to sink your work under water. It looked great! Why destroy what you've made?

@Cactusfruitsquisher

Ай бұрын

Most people just glue a fishing line to their ship so they can just pull it back out. These models are made of plastic, They can be reused

too realistic britannic

4:02 he used his hand

im gonna say the sinking was a bit high and the bow was so low idk what happen

name music

Pls Name Music Or

@gordak

10 ай бұрын

its in the info section with links

Im sad 😢2:12

Titanic 🤔?

you forgot to add some other details why do people on the internet always make britannic movie models 🤦🏼‍♀️

Aw I don’t have Color anymore

Eka what do britannic how to toat tondat bote modt nahi tar ☁️☁️🚢 fog to nice action to to go Eka

W ow

no watertight compartments,so poor sinking simulation

Lol I have the same titanic model and it's not looking good like prop things came off and one of the sides is bulging outward but yea a teacher got it for me back in the 4th grade. I'm going into sixth-grade I am worried to tell people about my KZread channel and bullying.

@gordak

2 жыл бұрын

Just do what you love, don't let bullies limit you.

@LOCOMOTIVE837

2 жыл бұрын

@@gordak ok.

@LOCOMOTIVE837

2 жыл бұрын

@@gordak thx

@LOCOMOTIVE837

2 жыл бұрын

@@gordak also it had a different box cover not like the one that you had.

aw i thought it would flip over :(

@Boypogikami132

2 жыл бұрын

Britannic doesn’t flip over

@ItsMeBS114

2 жыл бұрын

@@Boypogikami132 yes it does

@JealouseStatement

2 жыл бұрын

@@ItsMeBS114 Britannic didn't flip over

@ItsMeBS114

2 жыл бұрын

@@JealouseStatement oh

@lexitnute1306

2 жыл бұрын

That 2000 britannic sinking was historicaly innacurate

Cool

Where you bought parts for britannic?

@gordak

2 жыл бұрын

shapeways.com