In this video I am bringing you along while I build, troubleshoot and customize my Fellblade Super Heavy Tank for my Imperial Fists Legion collection.
Жүктеу.....
Пікірлер: 19
@WilhelmScreamerАй бұрын
The kratos dozer blade looks *correct* on the fellblade. The hand rails are also excellent. I yearn for a plastic version of this.
@TomsHobbyAdventures
Ай бұрын
A plastic version would be awesome indeed, and a lot easier less stress over what would happen if it was dropped 😅
@Nomand55
Ай бұрын
i dont think its to far off. i never thought they would actually do plastic solar auxilla, but they did. and they did do some big plastic vehicles for the new edition of HH, so Id say next year or two years from now we will see it revealed. of course it might take some time to get to market.
@johncolvin2754Ай бұрын
Love your fellblade ❤
@TomsHobbyAdventures
Ай бұрын
Cheers, glad you like it too :)
@theemissary131321 күн бұрын
Nice, inspiring video. When i had issues with the size of the fw doors on a similar model, i used a knife to widen the hole. That was a mistake, didn't work.
@TomsHobbyAdventures
21 күн бұрын
Ooof, in that case I am glad that I didn't go that route! :O I hope you managed to fix yours up without too much issue :)
@chadking375Ай бұрын
You are a trooper for working with resin on this scale. I flat out refuse to use it for anything but flashy overpriced HQs
@TomsHobbyAdventures
Ай бұрын
Hah true it can be a challenge during - but after it is quite satisfying. Just requires a bit of patience to overcome the challenges
@outofthisworldmodelsandmin898Ай бұрын
All I can say is WOW! I'm thinking you like 40K armour 😂. Great job with the assembly and conversions. I just found your channel and have subscribed to you. Keep up the great work! -John
@TomsHobbyAdventures
Ай бұрын
Haha thanks :D and welcome
@the_arcanum27 күн бұрын
Dude, why don't you mold the OOP doors you already bought so you don't need to cannibalize your Rhino ? Even if you don't want to deal with costly silicone and urethane resin, you can easily mold such a simple part with low-temp thermoplastic (like lowtemp hotglue that soften in hot water or Oyumaru blue stuff) and cast it with a Greenstuff+Miliput mix... Note that technique can also help when you have a bad ForgeWorld cast and a good reference one !
@TomsHobbyAdventures
26 күн бұрын
Oh my... I didn't think of that at all. I even got bluestuff! Completely blanked out on that opportunity. I really appreciate the comment, thank you!
@the_arcanum
26 күн бұрын
@@TomsHobbyAdventures Believe me, I'm far from impervious to those ¨duhh why didn't I think of this" moments when watching content on YT. Glad to have contributed :)
@TomsHobbyAdventures
26 күн бұрын
@@the_arcanum Thanks for reminding me anyway! If you see me do stupid stuff in the future don't hesitate to let me know so I can improved. Of course I might disagree on some things but being made aware is helpful all the same!
@MrTommekiff23 күн бұрын
Good work, but the eerie music was annoying
@TomsHobbyAdventures
23 күн бұрын
Thanks for the feedback, I will try to keep it in mind for the future. I dont have loads of music to choose from, so I try to experiment a bit instead of using the same in every episode :)
@MrTommekiff
23 күн бұрын
@@TomsHobbyAdventures I see. Well, I bet next video will be an absolute banger.
@TomsHobbyAdventures
21 күн бұрын
@@MrTommekiff Hehe I certainly cannot promise anything, I am still learning this along side my actual hobby hehe, I can promise that I will consider feedback, such as you gave me, and try to improve over time :)
Пікірлер: 19
The kratos dozer blade looks *correct* on the fellblade. The hand rails are also excellent. I yearn for a plastic version of this.
@TomsHobbyAdventures
Ай бұрын
A plastic version would be awesome indeed, and a lot easier less stress over what would happen if it was dropped 😅
@Nomand55
Ай бұрын
i dont think its to far off. i never thought they would actually do plastic solar auxilla, but they did. and they did do some big plastic vehicles for the new edition of HH, so Id say next year or two years from now we will see it revealed. of course it might take some time to get to market.
Love your fellblade ❤
@TomsHobbyAdventures
Ай бұрын
Cheers, glad you like it too :)
Nice, inspiring video. When i had issues with the size of the fw doors on a similar model, i used a knife to widen the hole. That was a mistake, didn't work.
@TomsHobbyAdventures
21 күн бұрын
Ooof, in that case I am glad that I didn't go that route! :O I hope you managed to fix yours up without too much issue :)
You are a trooper for working with resin on this scale. I flat out refuse to use it for anything but flashy overpriced HQs
@TomsHobbyAdventures
Ай бұрын
Hah true it can be a challenge during - but after it is quite satisfying. Just requires a bit of patience to overcome the challenges
All I can say is WOW! I'm thinking you like 40K armour 😂. Great job with the assembly and conversions. I just found your channel and have subscribed to you. Keep up the great work! -John
@TomsHobbyAdventures
Ай бұрын
Haha thanks :D and welcome
Dude, why don't you mold the OOP doors you already bought so you don't need to cannibalize your Rhino ? Even if you don't want to deal with costly silicone and urethane resin, you can easily mold such a simple part with low-temp thermoplastic (like lowtemp hotglue that soften in hot water or Oyumaru blue stuff) and cast it with a Greenstuff+Miliput mix... Note that technique can also help when you have a bad ForgeWorld cast and a good reference one !
@TomsHobbyAdventures
26 күн бұрын
Oh my... I didn't think of that at all. I even got bluestuff! Completely blanked out on that opportunity. I really appreciate the comment, thank you!
@the_arcanum
26 күн бұрын
@@TomsHobbyAdventures Believe me, I'm far from impervious to those ¨duhh why didn't I think of this" moments when watching content on YT. Glad to have contributed :)
@TomsHobbyAdventures
26 күн бұрын
@@the_arcanum Thanks for reminding me anyway! If you see me do stupid stuff in the future don't hesitate to let me know so I can improved. Of course I might disagree on some things but being made aware is helpful all the same!
Good work, but the eerie music was annoying
@TomsHobbyAdventures
23 күн бұрын
Thanks for the feedback, I will try to keep it in mind for the future. I dont have loads of music to choose from, so I try to experiment a bit instead of using the same in every episode :)
@MrTommekiff
23 күн бұрын
@@TomsHobbyAdventures I see. Well, I bet next video will be an absolute banger.
@TomsHobbyAdventures
21 күн бұрын
@@MrTommekiff Hehe I certainly cannot promise anything, I am still learning this along side my actual hobby hehe, I can promise that I will consider feedback, such as you gave me, and try to improve over time :)