Building an RC boat part 8 - The Chris Craft Corvette conversion
This video shows further work on the superstructure
Жүктеу.....
Пікірлер: 32
@gwheyduke2 ай бұрын
The video series has been a great in constructing the cabin on my 44-inch Vic Smeed Vivacity model. I encountered some problems with the 22 windows and the cabin top construction, but now it's all sorted out. Appreciate the help.👍 Posting some build pictures on my community page.
@modellingmisadventures
2 ай бұрын
Great to hear! 👍
@gwheyduke8 ай бұрын
You've built a great looking model.
@modellingmisadventures
8 ай бұрын
Thank you 👍
@robertschmidtrcmodelboats64837 ай бұрын
Looking very nice .
@modellingmisadventures
7 ай бұрын
Thank you.
@diffened10 ай бұрын
Wow! I built what appears to be that same model back in the early 1960s. Made it into radio control with a surfer being towed from a string in the back. Still have it in my basement. Back then, in the US anyway, my dad had to send away for a license for the RC. Servo was so crude that when you turned right it was all or nothing, and it fish tailed because it had to cycle through going left. It was still fun though. Yours is beautiful, came out much better than mine, but I was about 10 years old. So glad I found this video.
@diffened
10 ай бұрын
Actually, after watching the video, it was a Chris Craft similar to this, but not the same model. Great work
@modellingmisadventures
10 ай бұрын
Amazing story. Glad you liked it.
@modelmania82510 ай бұрын
turned out realy nice , that will look amazing on the water :-)
@modellingmisadventures
7 ай бұрын
Let's hope it doesn't sink 😉
@steveprisby30438 ай бұрын
very impressive work ! looks much better than the Dumas boats models which don't have that much attention to detail.
@modellingmisadventures
8 ай бұрын
Thank you 👍
@michaelanthony153710 ай бұрын
Nice work!
@modellingmisadventures
10 ай бұрын
😊 Thanks
@Beinl10 ай бұрын
Beatifuel boat ❤
@modellingmisadventures
10 ай бұрын
Thank you 👍
@user-ft4yz5st7n4 ай бұрын
superbe travail, bravo!!!!!
@modellingmisadventures
4 ай бұрын
Merci👍
@ellesmerewildwood485810 ай бұрын
Tough to get a really good polish on timber, but you nailed it, so to speak. Beautiful boat, when it's finished, it might be far to nice to put it in the water. I love that silver strip you ironed on, it added a fantastic feature. Is that available from RC model shops ? I've got uses for that stuff.
@modellingmisadventures
10 ай бұрын
Thanks. Yes, iron on film is readily available from RC model shops in various colours.
@salvatorealessandrino945
8 ай бұрын
Oracover also for planes
@TinyHouseHomestead10 ай бұрын
😁👍👍👍🇺🇲
@modellingmisadventures
10 ай бұрын
🙂
@salvatorealessandrino9458 ай бұрын
When the plastic windows are some crashes on how can you make the window like new thank you
@modellingmisadventures
8 ай бұрын
If that happened they would need to be sanded and polished using polishing compounds.
@salvatorealessandrino9458 ай бұрын
Hallo how do you put the windows in thank you
@modellingmisadventures
8 ай бұрын
Will be shown in the next video.
@salvatorealessandrino9458 ай бұрын
Hallo i have to put balsa one on the deck the color is no match with the color of the deck its peace balsa very light color how can i resolve that thank you
@modellingmisadventures
8 ай бұрын
You will need to stain it with a wood stain.
@salvatorealessandrino945
8 ай бұрын
Hallo where can i find the link to tape the boat without mixing with other color i dont find the video for that problem thank you
@modellingmisadventures
8 ай бұрын
If you look back at some of the earlier videos you will see how the boat was painted.
Пікірлер: 32
The video series has been a great in constructing the cabin on my 44-inch Vic Smeed Vivacity model. I encountered some problems with the 22 windows and the cabin top construction, but now it's all sorted out. Appreciate the help.👍 Posting some build pictures on my community page.
@modellingmisadventures
2 ай бұрын
Great to hear! 👍
You've built a great looking model.
@modellingmisadventures
8 ай бұрын
Thank you 👍
Looking very nice .
@modellingmisadventures
7 ай бұрын
Thank you.
Wow! I built what appears to be that same model back in the early 1960s. Made it into radio control with a surfer being towed from a string in the back. Still have it in my basement. Back then, in the US anyway, my dad had to send away for a license for the RC. Servo was so crude that when you turned right it was all or nothing, and it fish tailed because it had to cycle through going left. It was still fun though. Yours is beautiful, came out much better than mine, but I was about 10 years old. So glad I found this video.
@diffened
10 ай бұрын
Actually, after watching the video, it was a Chris Craft similar to this, but not the same model. Great work
@modellingmisadventures
10 ай бұрын
Amazing story. Glad you liked it.
turned out realy nice , that will look amazing on the water :-)
@modellingmisadventures
7 ай бұрын
Let's hope it doesn't sink 😉
very impressive work ! looks much better than the Dumas boats models which don't have that much attention to detail.
@modellingmisadventures
8 ай бұрын
Thank you 👍
Nice work!
@modellingmisadventures
10 ай бұрын
😊 Thanks
Beatifuel boat ❤
@modellingmisadventures
10 ай бұрын
Thank you 👍
superbe travail, bravo!!!!!
@modellingmisadventures
4 ай бұрын
Merci👍
Tough to get a really good polish on timber, but you nailed it, so to speak. Beautiful boat, when it's finished, it might be far to nice to put it in the water. I love that silver strip you ironed on, it added a fantastic feature. Is that available from RC model shops ? I've got uses for that stuff.
@modellingmisadventures
10 ай бұрын
Thanks. Yes, iron on film is readily available from RC model shops in various colours.
@salvatorealessandrino945
8 ай бұрын
Oracover also for planes
😁👍👍👍🇺🇲
@modellingmisadventures
10 ай бұрын
🙂
When the plastic windows are some crashes on how can you make the window like new thank you
@modellingmisadventures
8 ай бұрын
If that happened they would need to be sanded and polished using polishing compounds.
Hallo how do you put the windows in thank you
@modellingmisadventures
8 ай бұрын
Will be shown in the next video.
Hallo i have to put balsa one on the deck the color is no match with the color of the deck its peace balsa very light color how can i resolve that thank you
@modellingmisadventures
8 ай бұрын
You will need to stain it with a wood stain.
@salvatorealessandrino945
8 ай бұрын
Hallo where can i find the link to tape the boat without mixing with other color i dont find the video for that problem thank you
@modellingmisadventures
8 ай бұрын
If you look back at some of the earlier videos you will see how the boat was painted.