Building An 800hp TERMINATOR COBRA In My Garage PT.1 | HUGE HE Upgrade!
Автокөліктер мен көлік құралдары
Today Project Angry Snake to get my 2003 terminator cobra to 700 horsepower begins! We start by getting rid of the old Fluidyne heat exchanger and replacing it with an Afco gt500 dual pass dual fan heat exchanger and it looks 🔥
Follow Me 👉🏼 / solodriven
Solo Driven Incorporated
P.O. Box 2189
Universal City, Texas 78148
For business inquiries contact via email: letstalksolo@gmail.com
THIS IS NOT A SPONSORED VIDEO! all views are based on my personal opinion and experience. Some CGI for entertainment and safety purposes.
Пікірлер: 72
Looking good brotha…And you seem to be getting a lot better and more confident working on the snake..Your editing has always been on point tho!!!🤣🤣👍
@SOLODRIVEN
2 жыл бұрын
Preciate you bro ✊🏼 little by little I’m challenging myself 💪🏼
It looks great! Can't wait to see it with the new blower.
@SOLODRIVEN
2 жыл бұрын
Thanks brother 💪🏼
It looks really good! Congratulations 🎉
@SOLODRIVEN
2 жыл бұрын
Thank you 🙏🏼
Keep them coming!
@SOLODRIVEN
2 жыл бұрын
Will do, project angry snake is about to go down! 🔥💪🏼
The Angry Snake baby! 💯👍
@SOLODRIVEN
2 жыл бұрын
If you ain’t first you’re last baby 😎🔥😆
Hell yea bro came out good especially with the brushed aluminum.. it would be a great idea to maybe spray paint the bumper guards black to blend in a bit more.. since they have a little surface rust and you can conceal the bend in the passenger side one.. just some food for thought before it all goes back together. Think smarter not harder 🤔. Anyyyways!! Remember STAY DRIVEN YEEEEEEE!
@SOLODRIVEN
2 жыл бұрын
That’s a great idea and I thought about it after the fact I put everything on but decided not to because that stuff is coming off in 2 years for sure so I’ll save myself the money. But AAAAAANYWAYS, be motivated, stay driven ✊🏼
That new setup looks killer!! Gonna keep your iat temps in check along with that monster pump and 3/4 lines.
@SOLODRIVEN
2 жыл бұрын
I….can’t…..wait 🥶
Those impact absorbers are replaceable when ready and loving the new setup. Looking forward for the progress of the build.
@SOLODRIVEN
2 жыл бұрын
Thanks for the information brother I was wondering about that and thank you, more videos coming! Let’s gooooooo 🔥
Nice brother !!
@SOLODRIVEN
2 жыл бұрын
Thanks bro ✊🏼
That heat exchanger looks awesome man! I want one now lol
@SOLODRIVEN
2 жыл бұрын
Thanks man! definitely gonna be a huge improvement over the previous one.
Great video !
@SOLODRIVEN
2 жыл бұрын
Thank you bro 💪🏼💪🏼
Damn bro it's getting there!!! 😎
@SOLODRIVEN
2 жыл бұрын
2 years to finally get to this point lol 💪🏼
That’s 🔥! I want one!
@SOLODRIVEN
2 жыл бұрын
Thanks bro haha ✊🏼🔥
The Angry Snake 🐍 just got angrier
@SOLODRIVEN
2 жыл бұрын
Yes sir 😈💪🏼
Car is gonna be a beast
@SOLODRIVEN
2 жыл бұрын
🐍🐍🐍 can’t wait
The car is gonna be badass
@SOLODRIVEN
2 жыл бұрын
Thanks bro, trying to make it at efficient as possible.
Where did you buy the intercooler/turbular bar?
Bruh …. You got me thinking of the inner belt ! I got no clue what condition mines in ! I got 75k miles . I’m sure that needs replacing too ! 😂😂😂😂 Thanks buddy ..
@SOLODRIVEN
2 жыл бұрын
Probably about that time, mine is bad so might as well change it while I’m there.
Really like the upgraded look. Should run a lot cooler. Do you have the arp head studs/bolts or are you running the stock ones?
@SOLODRIVEN
2 жыл бұрын
Thanks brother I appreciate it. And factory head studs for now.
Where did you order the kit from?
Looks great man. Can you post a link on where to buy that heat exchanger and crash bar?
@SOLODRIVEN
2 жыл бұрын
Thanks brother! Just look up MAF Racing ✊🏼
Looking good Solo, can’t wait for the next step, new blower?
@SOLODRIVEN
2 жыл бұрын
Thanks John, next week we hit it again 💪🏼
Trunk tank should help a lot also along with 1” or 3/4” lines
@SOLODRIVEN
2 жыл бұрын
Been doing my research on one and it’s definitely on the list for the future 💪🏼
awesome videos man i just picked up an 03 cobra but having an impossible time finding an o/r x pipe, any chance you got one laying around? lol
@SOLODRIVEN
2 жыл бұрын
Thanks man and congratulations! Unfortunately I don’t.
@NickSinko
2 жыл бұрын
@@SOLODRIVEN thanks man super exciting! And damn yeah it’s like impossible to find them now I haven’t had a mustang in a few years so I wasn’t aware they don’t make them anymore
@SOLODRIVEN
2 жыл бұрын
Add 03/04 cobra parts on Facebook
Not bad
@SOLODRIVEN
Жыл бұрын
Thank you bro ✊🏼
how was the fitment of the heat exchanger? I heard some guys had to cut/massage the headlight panel to fit
@SOLODRIVEN
2 жыл бұрын
Not true on my application at all. I haven’t re installed the bumper but it was literally a 2 minute install with no additional customization needed since it attaches to the tubular crash bar.
Nice!! You gonna run it at the track when everything is done?
@SOLODRIVEN
2 жыл бұрын
Thank you. I wish! The tracks where I live shut down so hopefully someone buys it and opens it up again.
@lifebringsus4393
2 жыл бұрын
@@SOLODRIVEN ah man, you gotta run it somewhere to know what it does! Maybe 140 traps.
Thats a wicked heat exchanger set up. I went over to try and find it but couldnt find it on there site. Do you have a link to it? Im building my 2v with a 2.1 kenne bell on it and just installed a afco dual pass thats supposed to be for a cobra. If I woulda saw this I would of been all over it
@SOLODRIVEN
Жыл бұрын
Nice! It’s the gt500 he, literally for the gt500
@spoolinsvt6489
Жыл бұрын
@@SOLODRIVEN for a 13/14 or a 07-12?
So what is the new bumper support piece, manufacturer, part number? Did you happen to notice how much lighter the tubular piece was compared to stock?
@SOLODRIVEN
2 жыл бұрын
It was hard to tell since the heat exchanger was already on there but I would say the whole assembly considering the fans and the HE is much larger than previous was about 5ish lbs heavier (guessing from just picking up by hand) so not really much of a noticeable difference. Maf racing crash bar.
@dbsimms63
2 жыл бұрын
@@SOLODRIVEN I figured the MAF tubular crash bar weighed a lot less than the stock bumper support so the whole thing might weigh the same or hopefully less. Which MAF crash bar does it take to mount the GT500 unit?
What intercooler pump is that
@Drewbert34
5 ай бұрын
It appears to be a Davies Craig EWP150
Man, stop bsin' lol. We saw the upgraded blower installed on the splitter video.
@SOLODRIVEN
2 жыл бұрын
Lol nah man I wish lol soon tho 😎💪🏼
You gonna sell old heat exchanger bracket ?
@SOLODRIVEN
2 жыл бұрын
Yes sir but they already sold. Cruise soon?
What part of Texas?
@SOLODRIVEN
Жыл бұрын
SA
How many labor hours would you say it takes to change it ? My guy charges $110 a hour .. Am I gunna get me eye knocked out 😂😂😂
@SOLODRIVEN
2 жыл бұрын
Everyone works different and has different tools but I would say 1 1/2 hours for the average joe hobby mechanic it’s super easy.
@stephenalexander2427
2 жыл бұрын
@@SOLODRIVEN 🙏🏻 thanks bro !