Building a Super Cheap Focuser for Anamorphic Lenses
Get my guides on anamorphic, anamorfake, USSR lenses, and more!
www.e-junkie.c...
Here's how to build another single focus solution for anamorphic lenses. This one should cost you less than $100! Thanks to Chase McCaffrey for all the info!
ebay.to/30fQtuA
Look for a 72mm Merkury 0.45x Wide Angle w/ Macro Adapter on eBay
ebay.to/3n0Ig7d
Get a brass M65 helicoid from eBay
ebay.to/3jfWL54
eBay seller I bought from: photographymall2011
To get the blueprint for this project, become a member of the channel on the 16mm tier or higher and find the file in our Discord server!
bit.ly/3u5lJss
GEAR I USE
Panasonic S5: bhpho.to/2ERKjt4
Panasonic GH5: bhpho.to/3dSXCWi
Metabones EF to MFT Speed Booster 0.71x: bhpho.to/2Z5NqFI
Contax Zeiss Lenses: bit.ly/contaxZeis
Russian Taking Lenses: bit.ly/ussrLenses
Soundtrack: "Juno" by OTON - Artlist.io
"Honey Moon" by Yostek - Artlist.io
"Verve (Short Version)" by Assaf Ayalon - Artlist.io
"Homegrown" by Monako - Artlist.io
Пікірлер: 68
I think it’s wildly understated in this video just how difficult working with 3d printed threads is. I’ve managed to sand everything down from the prints to fit my helicoid but getting the retaining ring in for the rear element (haven’t gotten to the front one yet) is nearly impossible to the point where I believe I may have actually bent the aluminum retaining ring in trying to get it to fit into the threads. Really cool idea but exceptionally difficult to accomplish.
@ItsDrewsif
Жыл бұрын
Yep, quick update: in my attempts to remove said retaining ring I’ve actually managed to apply enough pressure to crack the entire thread portion of the 3d print rear element. My only hope now is to be able to very precisely break the ring so that it successfully holds the lens element in place.
@ItsDrewsif
Жыл бұрын
And that’s exactly what I did! I ended up taking a flat head screwdriver and a rubber mallet and very very carefully forcing the retaining ring down against the rear element. It works and it stays, but the rear 3d print gets even *more* stuck against the helicoid when trying to focus. Smooth focus throws are not going to happen with this. Front element and ring, ironically went in without a hitch. Now I’m just waiting on a 72mm to m65 adapter ring from RAF Camera to attach it to my Sankor 16-D.
True to the spirit of budget production methods! Hail to the king!
Bravo!!! Another home run! Thanks Tito
Awesome tutorial! Thank you
Hi and many Thx for this, but the discord link for the blue print leads... Nowhere ?
Good job; looks nice!
Brasil e Nois mano.
Has anyone tried this using a .043x 72mm wide angle adapter? Would it work?
If anyone is looking for a cheap one, I make budget solutions with high image quality and good build using vintage 60mm Lomo lenses.
@levialgol8886
3 жыл бұрын
How much is a single focus solution from you ?
@creative_camera_lens
3 жыл бұрын
@@levialgol8886 260$
@TheCorruptedBunny
2 жыл бұрын
Still selling? Looking for a focuser for a Ultra Star Red
@creative_camera_lens
2 жыл бұрын
@@TheCorruptedBunny yes write me a comment under my fm video
Great idea I like how simplistic this is great execution the end result looked really cool, is there bigger glass for bigger lens options?
@AnamorphicOnABudget
3 жыл бұрын
Not that I know of... :(
@nothingness.emptiness
3 жыл бұрын
Anamorphic on a Budget I might need to try this thanks for sharing
Thanks for all these amazing videos, man! They've been very educational and I've enjoyed them a ton. For this adapter it says the files are available via your Discord server. The link, however, seems to go to a server that's been shut down. I recently got a Schneider Super Cinelux 2, the dreaded one with the crazy front, and am exploring how to make it functional. Are the 3D files for the focuser still kicking around somewhere? Thank you!
@AnamorphicOnABudget
2 жыл бұрын
Hey Erik, the server is still going, but you need to be a 16mm member of the channel to get access to the server and files! :)
@toastno6
Жыл бұрын
@@AnamorphicOnABudget Hi! Same question! Just joined at the 16mm level but can't find the flies for this adapter anywhere. Fun Discord though!
I have a canon wide angle
Aye Brother Tito! I just did some mods to this exact Focus module you sold me. This thing is really sharp and clears with a 50mm taking lens on my GH5 using the ES CineLux. One question I had was is it possible to use a 0.7x Wide Angle Adapter with larger elements or is 0.45x Wide Angle adapters best?
@AnamorphicOnABudget
3 жыл бұрын
The Pfocus uses a 0.7x wide angle adapter. This one uses a 0.45x. I think the results with the Pfocus are much cleaner. You can join the channel to see the assembly process! :)
Hey! Great project, so cool single focus is possible for diy! What are focal length of those two lenses approximately? Or more precise, how do they relate to each other? trying to get an idea of how the system works.
@AnamorphicOnABudget
3 жыл бұрын
Thanks Konstantin! That's beyond what I tried to learn of it. I didn't get to measure the power of each element. If you watch the video on the Pfocus, you'll see how one is a negative and the other a positive diopters, and a general idea of how it works.:)
@konstantinplotkin988
3 жыл бұрын
@@AnamorphicOnABudget What I was wondering is what the relation between the focal length of these two - is one the exact opposite of the other? (they should be to focus on infinity, so they cancel each other??..)
my 1st project with DIY single focus is kinda this style, with cheapo 58mm macro - WA that i found on marketplace and the result is horrendous ahahaha
@AnamorphicOnABudget
3 жыл бұрын
I gotta say, the results are pretty messy! hahahaah
@LucasPfaff
3 жыл бұрын
Regardless of the IQ, you made one, and you should be proud of that
love you man...! 💐
Is there still a way to get these files? There seems to be no active link.
Hello thanks for the video, will I be able to thread a variable ND filter to the front of this single focus system?
@AnamorphicOnABudget
3 жыл бұрын
You should, as we have an 82mm front.
Hey Tito. Thanks a lot for the videos. They've been a huge help. I have a question for you: If you were gonna use the slr magic 2x50 adaptor on the S5, what do you think would be the ideal lens focal length to pair it with? Would you recommend or discourage this pairing? Thanks!
@AnamorphicOnABudget
3 жыл бұрын
Thanks! An 85 would be the shortest focal length to clear the S5 sensor. :)
Quick question on anamorphic stills: how can I de squeeze the image in Lightroom or PS express? (I’m shooting on an iPhone and don’t want to have to pay for an app...) Any help would be immensely appreciated!
@AnamorphicOnABudget
3 жыл бұрын
I don't think you can. Lightroom for sure doesn't do it. I never tried PS Express.
Where can one find the version with step up rings and epoxy?
@AnamorphicOnABudget
3 жыл бұрын
I never made it.
@JaredBritt
3 жыл бұрын
@@AnamorphicOnABudget but you said “the original tutorial”.
Nice build ! Use gloves to clean your glass
Where's the link for the 3D models?
@AnamorphicOnABudget
3 жыл бұрын
They're available for S35 members of the channel. Check the "Join" button and get access. :)
wtf is up with that "music" at 7:22?
hii... nice single focuser, but i need a request for the 3d file? then I request one... hehehehe... really... really thanks... love your work...
@AnamorphicOnABudget
3 жыл бұрын
I fixed the file permissions! It should be good now! :)
@radityapandet5396
3 жыл бұрын
@@AnamorphicOnABudget Thanks... :D
Hey Tito, Does it work with Wide Angle Converter 0.75 also?
@AnamorphicOnABudget
2 жыл бұрын
The spaces and specs will be different, but the idea is the same at heart.
@Alex-CPopa
2 жыл бұрын
@@AnamorphicOnABudget thank you!
cool man
Why it's a bit soft n blurry?
@stuCameraman1
11 ай бұрын
Uld be the taking lens (the 50mm lens at f1. 4) I use a helios 44 58mm f2... Sharp
This goes to the front of the Anamorphic lens, right? How would you approach a lens with a front diameter of, let's say, 110-130mm? XD
@AnamorphicOnABudget
3 жыл бұрын
Yes! Hmmm, I wouldn't approach it. I'd steer clear of anything like that. HAHAHA!
@glnnk_art
3 жыл бұрын
@@AnamorphicOnABudget Whoops :D Just got a 35 NAP 35mm Projector lens. Found it for fairly cheap, it will be a good point to start with anamorphics. If I can't find a large enough set of glass to build a focuser, I might just try developing an actual (ghetto) dual follow focus system. I know a bit about programming, AND I own a 3D printer. lol
@martinw6297
3 жыл бұрын
@@glnnk_art i am also looking for something cheap for my projection lens with a 82mm front element. Motorized servo controlled dual focus? 😉
I had real problems with the stl's the front part to fit it onto the helicoid its inner diameter was 1 mm off, the threads where a bit too tight so the tension rings got stuck in the back part. Causing me to cut the printed piece to save the parts. So yea i probably have to adapt the stls to make it fit correctly. If only i had the 3d files. any idea whom i could email for it?
@AnamorphicOnABudget
3 жыл бұрын
Oh crap! My original files are stuck in Fusion 360, since my free plan expired! I guess not all helicoids have the same values. :(
@themassau
3 жыл бұрын
@@AnamorphicOnABudget Oke i'll just redraw it then :) if i finish it i'll send it to you. Hopefully i have a little bit smoother threads then in the video.
@themassau
3 жыл бұрын
@@AnamorphicOnABudget I eventually made a simpler system where i reuse the front metal part by printing an adapter ring that converts its diameter to the inside diameter of the helicoid. (3mm thick) this allowed it to double press fit it together. A good trick to avoid super glue stains is to use a hair dier for the first 5 minutes and then try to add a fan for some extra air movement. i.e. it is caused by moisture + stationary vapors.
@zeuduslao
3 жыл бұрын
@@themassau could you share this to the crowd please?:D
@themassau
3 жыл бұрын
@@zeuduslao I never really got it to work and kinda gave up on it. I.e. i didn't fouces properly. What i ended up doing was printing a very tight fitting ring to adapt the front element into the helicoid directly. This was strong enough to hold the front element in place and thus i could reuse the metal part.
That 1 👎 fella seems salty.
mehhhhh
all that work and picture quality is so horrible.........